How to delete the server side sessions

Hi All,
I have a wireless application and it is accessed through ptg/rm gateway from a PDA browser. Oracle wireless AS gives default login page (when the application is accessed through ptg/rm gateway) and when user login, user information session might get stored in server side (I am not sure, if any one can pls clarify me on this also?).
Now i have a requirement, in which my application user should get 'logoff' button in each and every page of my application. When he clicks on this button the user information session should get invalidated, so that even if the user goes back to the application (using back button of the browser) he should not able to enter the application. (This is same as any std. login/logout page logic).
Invalidating the session which resides in client side is easy (By using session.invalide()), but how can i delete the session which resides on the server side??? Whether is it possible??
If yes then how can i do it.
Any help will be very usefull.
Thanks well in adavance.
Shrikant

Shrikant:
Shouldn't it be easy to invalidate the server sided sessions? Right before invalidating the client side session, send a message to the server, which should call its session.invalidate() after it has obtained the current session. If desired, a message can be sent back to the browser informing user that server side session has been deleted.

Similar Messages

How can delete the serve.bannersdontwork virus from Safari on Mac?

Hello @all,
How can delete the serve.bannersdontwork virus from Safari on Mac?
About every 8-20 clicks Safari opens a webside named serve.bannersdontwork.
I can not remove this with my Avira antivirus programm.
Can anybody help me?
THX
Hallo an alle,
Ich habe mir einen Virus eingefangen, serve.bannersdontwork, auf Safari.
Alle 8-20 clicks öffnet sich diese Seite "serve.bannersdontwork" und leitet mich auf andere weiter.
Über mein Antivirusprogramm Avira konnte ich den Virus nicht beheben.
Auch die erweiterung AdBlock hilf hier nicht weiter.
Wer weiß, oder hat eine Ahnung, wie man diesen Virus wieder los wird?
Danke schonmal im voraus!!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

How to run the Server Side Existing rule in Exchange 2010

Hi All,
There were requirement to create a auto forward rule for almost more than 5000 users, which we did, but the we want to apply this rules to the messages which are already in the inbox for all those users where we have created the rule.
Right now the problem what we are facing is for each individual we have to take full access to their mailbox and execute the rule first time and then it works.
this is becoming challenging for us to making this for all 5000 users. the other problem is those user are not regularly login to this mailbox, they are using some other Org mailbox, so even we can not communicate to all of them.
Q1) How to run the Server Side Command which should forcefully apply whatever rules is created for that user should execute for the messages which are already in the inbox.
Q2) or the powershell for for specific rule name, which can apply on the for all the messages which are there in the inbox.
Any help would be appriciated!
Thanks in adv champions!
Ashku

Hi Ashku,
If these 5000 users are all users in your Exchange organization, a inbox rule can be created by the following commands:
Get-Mailbox | foreach {New-InboxRule -Mailbox $_.Name -Name AutoForward -From [email protected] -ForwardTo UserB}
Based on my test, the Inbox rule created in server side also cannot work on the message that have already been in the Inbox unless users click “Run Rules Now…” in their Outlook client. And the transport rule in Exchange server only works
during the message sending process.
Therefore, there may be no feature in Exchange server side to meet your requirement.
Thanks for your understanding.
Thanks,
Winnie Liang
TechNet Community Support

How to delete the serv. P.R ?

Dear All,
I have created a serv. p r, then created a servP.O wrt this P.R, now i have to del. this PR, so i have deleted the line item of p.o, & then trying to del.this P.R, but as i del.the line item in ME52N, & then i save it then an error is coming as this P.R cannot be changed. pl help
sap12
Edited by: sap12 on Nov 6, 2008 1:13 PM

Dear Ashok,
Pl read this , ---> thanx for prompt reply,
here first i had tried to delete the line item in item overview , but even then P.R line item was not deleted as i delete the line item then try to save the error comes as this P.R can not be changed, hence i had deleted the line item from Delv sch. tab then i had dele. the line item from item overviwe, after this i come to ME52N now here deleted the line item in overviwe now system had issued no error this time , i need to know that the process of deleting line item from delv sch. tab in item level is correct or not OR suggest any other method, no GR is done for this P.O.
Rgds
sap11

How to overwrite the server side validation error message generated by OAF

Hi,
I have an update page, after a new row is added, if I leave column1 blank, and click 'save' button, I get the error message both on the top of the page and under column1, the error message is like:
Row 4 Q1 Value - Attribute Q1Value in Xxg2cNodeSeasonalityAM.Xxg2cNodeSeasonalityVO1 is required.
I would like to have error message as following:
Row 4 Q1 Value - Q1 is mandatory.
How should I do?
thanks
Lei

Lei,
Check use of OAAttrValException in javadoc.
--Shiv

Delete the stored archive sessions form SAP filesystem

Hello,
Can any one explain How to delete the stored archive sessions form SAP filesystem. any transaction to delete the session from physical path.
-thanks
Ramana

Not Sure , check this
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/402fae48-0601-0010-3088-85c46a236f50&overridelayout=true
Re: Maintenance in the /usr/sap file system
Edited by: Harsh Bhalla on Nov 28, 2009 10:10 AM

Bw web report plugin http session hangs at the server side

Hi,
I am having problems when closing the browser of a BW web report. After I closed the browser by going File->close, I ran SM04 and found out the Plugin HTTP session hangs at the server side.
How can we terminate the Plugin HTTP session at the server side when user closes the internet browser?
I did implement a logoff function at my web template, if user clicks on the logoff, the Plugin HTTP session is terminated at server side correctly. But As you know, 50% of time user will close the report by closing the internet browser instead of clicking the logoff. That leaves lots of hanging Plugin HTTP sessions at our server side.
By the way, we actived our BEX service at the SICF.
Thanks for help!
JA

Hi
If you want to avoid a blank page with logoff button, add opener=0
<a href="<SAP_BW_URL CMD='LOG_OFF' ~command='logoff'
>" onClick="javascript:window.close(opener=0);">Log off</a>
If you want to close the session via X, use this code:
create a sapscript function
function closeSession()
logoff()
window.unload=CloseSession()
However, the Plugin HTTP session isn't killed.
Regards

How to Get the excel sheet formula from the server side into the j2me app?

How to Get the excel sheet formula from the server side into the j2me application?
Here the excel sheet is in server side.i want to do get the excel sheet values (only some part of the excel sheet based on some conditions) from server side into j2me.In j2me I want to done some client side validation based on the formula of excel sheet.Then i resend the new updated data to the server.
But here deosn't know any mehtod to get the excel sheet formula from server side.So kindly help me to get the excel sheet formula from the server.
So how to get the excel sheet formula frome the server side into j2me Application...
Plz guide me to solve this issue...
thanks & regards, Sivakumar.J

You should not post a thread more than once. You've crossposted this question to another forum. I have deleted that one.

How to delete the deployed composite in weblogic server 11g

Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
Thanks

Hi
1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
3. If you really want to have a full clean soa domain, here is what you do:
a) Run rcu and drop the existing schemas for soainfra and mds.
b) Run rcu again and create above schemas again.
c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
Thanks
Ravi Jegga

How can I disable excel addin on the Server side?

Hi, is there any way to disable excel addin on the server side?
We want to disable it so that no one can modify or read data in the cube in the production environment, even if he or she had installed the add in. Instead, we provide the Planning data forms as the only interface for end-users to read and write. we do this because the add in is very easy to install and users can read and write data in the cube at their will.
As we designed to keep the security filters simple, it is not a good idea to controll data access through security filters.
so, what i'm asking is how to disable excel addin on the server side?
Thank you for replying.
Edited by: user4592285 on 2012-10-18 上午6:48

Hi,
As Gurus suggested, you will have to restrict viewing of data through dimension level security.
Give access of members to users, only which are relevant to users so that they can't view other user's data/members.
Like give access of members belonging to HR dept only to HR users and give access of Finance dept related members to finance users only.
Hence HR users will view only HR relevant data and won't be able to view (read or write) finance related data and vice-sa-versa.
Hope this helps
Regards
-SM
Edited by: 918547 on Oct 18, 2012 8:40 PM

How to delete the redundant sessions in Maintenance Optimizer?

Hi experts,
As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
Thank you in advance.
Best Regards,
Pany

Hello,
Check here Deleting existing maintenance optimizer transactions
Please refer to the note 845433 , with the report CRM_ORDER_DELETE and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
BR,
K.

How to access a JS changed attribute on the server side?

hi all;
if i change an attribute on a custom component via java script on the client side.
how can i access the changed value on the server side?
in what method will i have the access to this changed field?
thanks in advance.

You can hardcode the ID of the component in the backingbean (or some propertiesfile) and use ViewRoot.findComponent(componentId). Using the binding is (much!) more elegant anyway.

HTTP SERVICE - How to get the value of my params on the server side

I am new to flex and with the url limitation i was trying to
do the following ....send a bunch of ids... using params variable
var myservice:HTTPService = new HTTPService();
myservice.url = url;
myservice.method = "POST";
myservice.resultFormat = "e4x";
myservice.send(params);
The question is how do i get the value i passed on using
params on the server side? can the variable params be a string or
array or does it have to be object type?
Any help would be greatly appreciated.

Most server side languages have a function or an array where
you extract the variables. in PHP they arrive in global arrays
called $_POST and $_GET.
Other languages have methods like request.formvars or
request.query. Check your serverside language on how that is
done.

How do I send a raw (push) notification from the server side using an Azure mobile service?

Hi there!
Currently I'm able to send toast notifications to my user from my Azure mobile service using the following line of code in one of my server side scripts:
push.wns.send(opponent_id, payload, 'wns/toast', {
success: function(pushResponse) {
console.log("Sent push:", pushResponse);
request.respond(statusCodes.OK, {});
error: function(pushResponse) {
console.log("Error Sending push:", pushResponse);
request.respond(500, { error: pushResponse });
But I would like to send a raw notification to my user now, not a toast notification. I've set up a background tasks which runs as soon as a raw notification arrives(I've tested this through the diagnose option of my mobileservicehub and it works).
I want to send a raw notification now from the server side and I'm kind off lost on how to do that. I've looked for it but can't seem to find an answer to that question, I might be looking for the wrong stuff though.
I'm looking for a solution that looks the same as the one for a toast notification(as demonstrated in the code above).
Your help would be greatly appreciated!
Thanks in advance!
Jan

I found the solution to this it was in fact really really easy, I should have read the documentation more properly since it clearly said that the payload for raw notifications could be literally anything but the client has to take care of it.
So I figured that out!

How to tell client disconection reason when invoke disconnect() on the server side.

Is there any way to tell client the reason for disconect when I call disconect() on the server side. its some way like using error object as optional parameter to include reject reason when invode rejectConnection

Ignore the JSRs for now.
Follow the JavaEE tutorial.
http://docs.oracle.com/javaee/6/tutorial/doc/
The answers to many of your questions will be clear to you once you have completed the tutorial.
I also like the tutorials here (they are a little dated, but still mostly relevant as the core JEE6 specs that the tutorial relies on were released over 5 years ago and JEE7 is yet to be released).
https://schuchert.wikispaces.com/EJB+3+and+Java+Persistence+API
zonski has a spring+javafx focused tutorial if you would prefer to learn and use Spring than JEE (they are differing technologies which cover pretty much the same functional set):
http://www.zenjava.com/series/building-jee-applications-in-javafx-2-0/
JavaFX is a client side framework so there is not much you would do with it on the server side.
It seems like there is a ton of "JSR's" for different tasks, and I'm not sure exactly what I need, and all that, so I'm really confusedNobody needs all of JEE, just use the bits that you want that are a good fit for whatever project you are doing - don't try to use everything at once.
A lot of the stuff can be learnt and used in isolation.
Selected relevant topics, might be (in the order that I would consider them):
Persistence: http://docs.oracle.com/javaee/6/tutorial/doc/bnbpy.html
Java Servlet Technology: http://docs.oracle.com/javaee/6/tutorial/doc/bnafd.html
JAX-RS web services: http://docs.oracle.com/javaee/6/tutorial/doc/giepu.html
Contexts and Dependency Injection: http://docs.oracle.com/javaee/6/tutorial/doc/gjbnr.html
Enterprise Beans: http://docs.oracle.com/javaee/6/tutorial/doc/bnblr.html

How to delete the server side sessions

Similar Messages

Maybe you are looking for