How to overwrite the server side validation error message generated by OAF

Hi,
I have an update page, after a new row is added, if I leave column1 blank, and click 'save' button, I get the error message both on the top of the page and under column1, the error message is like:
Row 4 Q1 Value - Attribute Q1Value in Xxg2cNodeSeasonalityAM.Xxg2cNodeSeasonalityVO1 is required.
I would like to have error message as following:
Row 4 Q1 Value - Q1 is mandatory.
How should I do?
thanks
Lei

Lei,
Check use of OAAttrValException in javadoc.
--Shiv

Similar Messages

How to run the Server Side Existing rule in Exchange 2010

Hi All,
There were requirement to create a auto forward rule for almost more than 5000 users, which we did, but the we want to apply this rules to the messages which are already in the inbox for all those users where we have created the rule.
Right now the problem what we are facing is for each individual we have to take full access to their mailbox and execute the rule first time and then it works.
this is becoming challenging for us to making this for all 5000 users. the other problem is those user are not regularly login to this mailbox, they are using some other Org mailbox, so even we can not communicate to all of them.
Q1) How to run the Server Side Command which should forcefully apply whatever rules is created for that user should execute for the messages which are already in the inbox.
Q2) or the powershell for for specific rule name, which can apply on the for all the messages which are there in the inbox.
Any help would be appriciated!
Thanks in adv champions!
Ashku

Hi Ashku,
If these 5000 users are all users in your Exchange organization, a inbox rule can be created by the following commands:
Get-Mailbox | foreach {New-InboxRule -Mailbox $_.Name -Name AutoForward -From [email protected] -ForwardTo UserB}
Based on my test, the Inbox rule created in server side also cannot work on the message that have already been in the Inbox unless users click “Run Rules Now…” in their Outlook client. And the transport rule in Exchange server only works
during the message sending process.
Therefore, there may be no feature in Exchange server side to meet your requirement.
Thanks for your understanding.
Thanks,
Winnie Liang
TechNet Community Support

Can I go back to the old look of the 'server not found' error messages?

After updating to Firefox 32, I noticed that the 'server not found' error messages now look differently. I don't like the new look, so I wonder if you know about an add-on that restores the old look. I've tried searching for it, but I don't know the proper name of these error messages, so I'm not sure what search phrase I should use.

To recall what it looked like before, I did a search: [https://www.google.com/search?q=server+not+found+picture+firefox&client=firefox-beta&hs=wiy&rls=org.mozilla:en-US:official&channel=fflb&tbm=isch&tbo=u&source=univ&sa=X&ei=QUIXVPz7Eou7ogSl8YD4Bg&ved=0CB8QsAQ&biw=1036&bih=554#facrc=_&imgdii=_&imgrc=dFf2lmJRgVlgyM%253A%3BS3EdEuvyajjWqM%3Bhttp%253A%252F%252Fi.stack.imgur.com%252F2ZJR2.jpg%3Bhttp%253A%252F%252Fsuperuser.com%252Fquestions%252F584305%252Ffirefox-says-server-not-found-because-its-adding-www-how-do-i-stop-this%3B851%3B455 Images of Server not found in Firefox]
I did not find an addon, but I did find an old hack for the profile folder in this thread: [http://forums.mozillazine.org/viewtopic.php?f=7&t=492177&start=0]
EDIT:
There was also [https://addons.mozilla.org/en-US/firefox/addon/errorzilla-mod/ ErrorZilla addon]

How to delete the server side sessions

Hi All,
I have a wireless application and it is accessed through ptg/rm gateway from a PDA browser. Oracle wireless AS gives default login page (when the application is accessed through ptg/rm gateway) and when user login, user information session might get stored in server side (I am not sure, if any one can pls clarify me on this also?).
Now i have a requirement, in which my application user should get 'logoff' button in each and every page of my application. When he clicks on this button the user information session should get invalidated, so that even if the user goes back to the application (using back button of the browser) he should not able to enter the application. (This is same as any std. login/logout page logic).
Invalidating the session which resides in client side is easy (By using session.invalide()), but how can i delete the session which resides on the server side??? Whether is it possible??
If yes then how can i do it.
Any help will be very usefull.
Thanks well in adavance.
Shrikant

Shrikant:
Shouldn't it be easy to invalidate the server sided sessions? Right before invalidating the client side session, send a message to the server, which should call its session.invalidate() after it has obtained the current session. If desired, a message can be sent back to the browser informing user that server side session has been deleted.

"The connection with the server was reset" Error Message

I am trying to download iTunes 8 for my new iPod that i got today.
However, when i am downloading the iTunesSetup.exe file, the file downloads normally until it gets to about 10.5MB.
After this a message pops up saying:
"Internet Explorer cannot download iTunesSetup.exe from appldnld.apple.com.edgesuite.net.
The connection with the server was reset"
Has anyone else had this problem, if yes how do i resolve it???
Thanks in advance for any help!

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

Does anyone know how to correct the download for itunes error message 7 windows 193?

I'm getting error message 7 (windows 193) when I download new itunes update.

Try Troubleshooting issues with iTunes for Windows updates - MSVCR80

There was a problem connecting to the server. This error message comes continuously when running final cut pro x

I used to have a nas connected to my mac, i mounted it with AFP. Added some music to my movies from that location but all downloaded to my local mac. There is nothing on the nas that is required in my movie, still i get the message continously popping up. How can i find out the reason it is constantly popping up?
With this it is impossible to use final cut for any editing, not cause i need data from the device but cause this popup comes up very annoyingly ever 10 sec or so.
The movies i have all playes fine in final cut, even though i have this pop up every 10 sec.
I cannot reconnect the nas as it is dead :-)
Many thanks to anyone that can advice me how to get rid of this very anoying pop up.
Thanks
Marcus

Sounds like there is some Alias files pointing to the NAS in your Events library.
If you have any idea about what songs it was, hunt them down and replace them with songs from the local drive.

There was a problem connecting to the server - Keep getting error message

Hi All
I have seen other people have had this problem and have tried most of their fixes but so far none of them have worked
I am running OSX 10.10 on a Macbook air and keep getting a message that pops up like this
I have tried the following
Disabling all sharing
Removing all login items for my user account (The only one)
I have never used time machine
Cleared my Recent lists of Servers
Reset the Sync Servers
Deleted System Logs (Only some from apps like Plex) which I thought may have cause my problem
and a few other things
It appears like that usually when the login screen comes up before I can even type my password, connecting to wifi networks and when attaching USB drives/storage device
Please help as this is driving me crazy

Can I also just add I just tried booting into safe mode and the popup still appeared

How find the ABAP code with Error message

Hi
How to find the ABAP Code for Error Message?
Example:
Error Message: ZF026.
Regards
Odaiah Pelley
Edited by: Odaiah Pelley on Aug 22, 2008 4:21 AM

Hi
Excellent Answer, I appreciate it.
My question is with Error Message ZF026.
How to find ABAP Code ?
If I go for SE91 I will get same message as if I am getting error message.It is no use.
Regards
Odaiah Pelleyu

BPC Optimization Server Time Out error message

We’re using BPC 7.5 MS and on patch level 111.02
There’s two front-end servers and one back-end.
When completing a full optimization with compression on an application we immediately get the optimization popup screen with no processing information only a “Server Time Out” error message.
Optimization was taking a long to time run and sometimes timed out. To try and resolve this issue we have just updated indexes and statistics and during our test in production we now receive the “Server Time Out” error message immediately. However, the records from tbl.Factwb and tbl.Fac2 did move to the tbl.Fact.
Our development environment test ran fine.
Any suggestions?
Thanks.

Hi Michael,
please look in the logs maybe you will found more informations regarding the timeout and eventually share it.
There are several notes about a timeout in 10 version,
1394533 - 'Server Time Out' error when performing Modify Application, Full Process of a dimension, or Full Optimize this is related with NLB
but it could be also related with the web.config 1628908 - How to fix Optimize with compress time-out failure
or if you reach the max number of connection
1635749 - Error Message: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool
Regards
Roberto

How do I send a raw (push) notification from the server side using an Azure mobile service?

Hi there!
Currently I'm able to send toast notifications to my user from my Azure mobile service using the following line of code in one of my server side scripts:
push.wns.send(opponent_id, payload, 'wns/toast', {
success: function(pushResponse) {
console.log("Sent push:", pushResponse);
request.respond(statusCodes.OK, {});
error: function(pushResponse) {
console.log("Error Sending push:", pushResponse);
request.respond(500, { error: pushResponse });
But I would like to send a raw notification to my user now, not a toast notification. I've set up a background tasks which runs as soon as a raw notification arrives(I've tested this through the diagnose option of my mobileservicehub and it works).
I want to send a raw notification now from the server side and I'm kind off lost on how to do that. I've looked for it but can't seem to find an answer to that question, I might be looking for the wrong stuff though.
I'm looking for a solution that looks the same as the one for a toast notification(as demonstrated in the code above).
Your help would be greatly appreciated!
Thanks in advance!
Jan

I found the solution to this it was in fact really really easy, I should have read the documentation more properly since it clearly said that the payload for raw notifications could be literally anything but the client has to take care of it.
So I figured that out!

[ASK] Duplicated Error Message on server side validation

I want to use server-side validation instead of client-side validation for my input form as suggested by John Stageman, by:
1). set required=false
2). set showRequired=true
3). Ensure that the attribute is mandatory in the model layer
It seems to work, except that the error message displayed by <af:messages> is kinda weird bcause they are repeated, for example;
Attribute Attr1 in MyAM.MyView is required
Attribute Attr2 in MyAM.MyView is required
- Attribute Attr1 in MyAM.MyView is required
- Attribute Attr2 in MyAM.MyView is required
Attribute Attr1 in MyAM.MyView is required
Attribute Attr2 in MyAM.MyView is requiredand the number of reduplication seems growing each time I click the Save button.
besides, for "value required" validation, the component related error message is not displayed (the red message under the component).
Any clues?
Thanks..
@John : I decide to open it as new thread bcause it seems to be different question..

Hi, thanks for your fast response Frank,
My page has several iterator binding and I have tried to set all of their refresh options as you suggested, but the problem still remains the same T_T
Maybe somewhere, someone has put some additional manual validation, bcause it is a team project, I still dont know where to find those phantom codes..
Regards,
from island of gods

How to Get the excel sheet formula from the server side into the j2me app?

How to Get the excel sheet formula from the server side into the j2me application?
Here the excel sheet is in server side.i want to do get the excel sheet values (only some part of the excel sheet based on some conditions) from server side into j2me.In j2me I want to done some client side validation based on the formula of excel sheet.Then i resend the new updated data to the server.
But here deosn't know any mehtod to get the excel sheet formula from server side.So kindly help me to get the excel sheet formula from the server.
So how to get the excel sheet formula frome the server side into j2me Application...
Plz guide me to solve this issue...
thanks & regards, Sivakumar.J

You should not post a thread more than once. You've crossposted this question to another forum. I have deleted that one.

How can I disable excel addin on the Server side?

Hi, is there any way to disable excel addin on the server side?
We want to disable it so that no one can modify or read data in the cube in the production environment, even if he or she had installed the add in. Instead, we provide the Planning data forms as the only interface for end-users to read and write. we do this because the add in is very easy to install and users can read and write data in the cube at their will.
As we designed to keep the security filters simple, it is not a good idea to controll data access through security filters.
so, what i'm asking is how to disable excel addin on the server side?
Thank you for replying.
Edited by: user4592285 on 2012-10-18 上午6:48

Hi,
As Gurus suggested, you will have to restrict viewing of data through dimension level security.
Give access of members to users, only which are relevant to users so that they can't view other user's data/members.
Like give access of members belonging to HR dept only to HR users and give access of Finance dept related members to finance users only.
Hence HR users will view only HR relevant data and won't be able to view (read or write) finance related data and vice-sa-versa.
Hope this helps
Regards
-SM
Edited by: 918547 on Oct 18, 2012 8:40 PM

How to access a JS changed attribute on the server side?

hi all;
if i change an attribute on a custom component via java script on the client side.
how can i access the changed value on the server side?
in what method will i have the access to this changed field?
thanks in advance.

You can hardcode the ID of the component in the backingbean (or some propertiesfile) and use ViewRoot.findComponent(componentId). Using the binding is (much!) more elegant anyway.

How to overwrite the server side validation error message generated by OAF

Similar Messages

Maybe you are looking for