How to: Deleting a Exported Datasource

Hi Guys,
Does anyone know how I can delete an export datasource in BWdev. I have deleted the source system (BW system) and the trans rule, comms structures and infosource for exported data source. However the original source cube still shows the green 'maintain export datasource' icon next to it. How can this be reomoved?
Thanks
Depesh

Hi Depesh,
go to transaktion SBIW and delete the datasource.
Postprocessing of DataSources -> Edit DataSources and Application Compponent Hierarchy -> BW -> DM -> Find your datasource.
hope that helps,
Michael
Message was edited by: Michael S

Similar Messages

Function module names to delete the Export Datasource

Hi Experts,
Can anyone please let me know what function modules are while deleting the export datasource. So far in my research i have found only
RSB1_DELETE_EXPORT_DATASOURCE. -- This fm does not deletes the export datasource, I want to know which fm is used exactly to delete the datasources.
To delete the virtual infocubes, the fm used is RSDG_CUBE_DELETE. Similarly there must be a fm to delete the export datasource.
Please help.
Thanks,
Prashant.

Hi Reddy,
I hope there is no specific function module to delete the entries ( as of version 4.0). So you need to code a delete statement to perform the task.
Thanks,
Siva.

How to delete modified version datasource

I have a datasource in M version and A version. I am getting datasource activation error in BI 7.0
Please let me know how to delete Modified version.
Thanks
Liza

I removed a field from LO datasource 2LIS_11_VAITM , activated, tested successfully in R/3.
I replicated the datasource successfully in BW. But when activate the data source I am getting short dump ST22 ,the error message is " The ASSERT condition was violated". I am BI 7.0.
BW side in datasouece I found a not equal to sign ( which means M version is not equal to A version) and datasource is inactive.
ST22 -
Short text
    The ASSERT condition was violated.
Error analysis
    The following checkpoint group was used: "No checkpoint group specified"
    If in the ASSERT statement the addition FIELDS was used, you can find
    the content of the first 8 specified fields in the following overview:
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
    " (not used) "
Thanks
Liza

*How to Delete the Old Forecast Versions from Cube & DSO? *

Hi BI Gurus,
I am currently designing my BI Model to deliver the APO DP requirements.
It would be great if some one can give me an Idea how to achieve the below:
We have a requirement that needs to me maintained the Data as Versions.
1. We are extracting the Data form APO DP planning area and maintaining the Versions based on the Forecast Version in BI. The Forecast Version in BI will hold the Versions in Calmonth format (MMYYYY).
2. Load frequency-- Monthly load for (36 months worth of forecast data)
3. Need to maintain 12 Versions and once we reach the 13th Version (13th load) then we need to delete the 1st Version
4. Data Flow details:
Export DataSource(PSA)> W.O-DSO->CUBE
Your help will be much appreciated.
Thanks in advance
Group BI

Hi Shanthi,
Thanks very much for your reply. But I am not able to understand your reply.
My Requirement is: We load monthly once to Standard DSO and Cube form WO DSO.
|---> Standard DSO
WO-DSO-|
|---> Standard CUBE
We generate the Forecast Version based on the System Date (we take Month to Forecast Version Object).
Example: We started loading form March-2008. We loaded 12 Versions by Feb-2009. When we do the next load which is 13th load, we want to delete the data we loaded on March-2008 from both DSO and CUBE.
Hope this is more clear now.
Once again thanks very much for your help.
Regards,
Group BI

How to delete duplicate data that generated from csv file??

The thing i have done is that i red all the data in the csv file without removing the duplicate data and display it.. For where i should have a known number of index (about 13), my main file should have 13 records no duplicate values. and how can my Java program update the corresponding record in the main file each time an index is updated??
Hope somebody can assist me on this..it would be really helpful for me...
Thank you.
-Rao-
Edited by: reemarao on Apr 1, 2010 3:58 AM

Hi Sudhir,
In case you have edit access in your system carry out the following procedure:
1. Create an export datasource on your cube.
2. Now create the update rules to your cube using the datamart Infosource.
3. In the update rules multiply all the key figures by
-1.
4. Now create an infopackage and give the request id of the duplicate request as selection.
5. Load the datamart request and do the data validation.
If you do not ahve edit access there is no other alternative you would have to delete all the data and reconstruct the requests that you need.
Bye
Dinesh

How to delete the Sites in SAP IS RETAIL

hello ALL,
can any one explain me how to delete the Sites in Sap Retail.
thanks in advance

Hello All,
Delete the plant / Site complete details and put in one transport and do the import & export.
Thanks.
Edited by: krishna cherry on Jul 26, 2010 3:28 PM

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

How to Delete and Reset a Lost Root Password on a System With a Mirrored ??

hi All,
we are experiencing problem,lost root password on Solaris 10 Sparc T5120, with mirror root,
and we found the solution from Metalink.oracle.com, has anyone have try this??
here list capture the file system :
Filesystem size used avail capacity Mounted on
*/dev/md/dsk/d10 2.0G 349M 1.6G 18% /*
*/dev/md/dsk/d40 9.8G 563M 9.2G 6% /usr*
*/dev/md/dsk/d30 9.8G 1.4G 8.4G 15% /var*
*/dev/md/dsk/d50 7.9G 310M 7.5G 4% /opt*
*/dev/md/dsk/d600 3.8G 4.3M 3.8G 1% /home*
*/dev/md/dsk/d602 471M 20M 404M 5% /app/controlm*
*/dev/md/dsk/d601 471M 251M 173M 60% /app/ctsa*
*/dev/md/dsk/d604 4.9G 1.1G 3.8G 23% /app/oramon*
*/dev/md/dsk/d603 20G 11G 8.2G 58% /app/oracle*
*/dev/md/dsk/d606 39G 10.0G 29G 26% /proj/iprdb01/orafra/iprod01p*
here the step :
Solstice DiskSuite[TM] Software: How to Delete and Reset a Lost Root Password on a System With a Mirrored Root Disk [ID 1010755.1]
Solution
Steps to Follow
How to delete and reset a lost root password on a system with a mirrored root disk.
1) Insert the Solaris[TM] Operating System CD-ROM into the CD-ROM drive.
2) Once the CD-ROM is in the drive, perform a stop-a. This brings the system down to the "ok" prompt.
3) From the "ok" prompt, perform a single-user boot from the Solaris OS CD-ROM.
ok boot cdrom -s4) At the "#" prompt, determine which disk is the system's boot disk (containing the root file system). There are several Oracle architectures and various configurations of systems when it concerns a boot disk. As a general rule, most boot disks are attached to controller 0 (c0). Usually, their SCSI target is
either 3 (t3) or 0 (t0). However, Oracle machines are very flexible, and the boot disk could be at a different location. If you are not sure which disk is your boot disk, perform the following steps to determine the location of the boot device:
a) # eeprom boot-device
The output might appear to be simple, such as "disk" or "disk1" or more complicated, such as a pathname "/iommu/sbus/espdma@4,8400000/...../sd@3,0:a".
b) Make note of the boot-device. If the boot-device is a pathname, it is beyond the scope of this information to provide the location of the customized boot disk. However, for most configurations,
finding the customized boot disk is an easy task. The "Format" command shows all available disks:
#format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
(enter its number): c) Enter d to exit format.
Now, you will have an idea what disks are on the system. Therefore, if the boot-device is "disk" and format shows "c0t0d0" (on some systems "c0t3d0") then that is the boot device. If boot-device
shows "disk1" and format shows "c0t1d0," then that is the boot device. If format shows multiple disks, then based on what the "eeprom boot-device" command shows, the system's boot disk would be:
boot-device format
disk c0t0d0 or c0t3d0 (machine dependent)
disk1 c1t0d0
disk2 c0t2d0
disk3 c0t3d0 or c0t0d0 (machine dependent)
and so on ....
5) Because the system was not brought down gracefully (no root password means having to use the Stop-a keystroke to "crash" the system), you need to run "fsck" to clean the root partition (slice). The fsckalso confirms that you selected the proper slice.
# fsck /dev/rdsk/c1t0d0s0
where the X and Y are determined by the previous procedure. It is also possible to have a root partition which is not on slice 0 (s0), but, again, that is not a standard configuration.
The output of "fsck" looks like this:
** /dev/rdsk/c1t0d0s0
** last mounted on /
** Phase 1 .....
The second line in the output of "fsck" ("** Last mounted on /") confirms that this is the correct root filesystem partition. Answer "y" to any questions fsck asks. There shouldn't be too many items
needing repair. If there are, there is a possibility of a corrupted root filesystem. After fsck is finished, mount the root partition:
# mount /dev/dsk/c1t0d0s0 /a
Again, X and Y are the same as for the fsck command.
For example:
# mount /dev/dsk/c1t0d0s0 /a
6) From the root prompt, set the proper TERM type command (such as vt100, dtterm, sun, and so on)
by entering this command:
# TERM=sun; export TERM
7) Use the VI text editor to edit the /etc/shadow file:
# vi /a/etc/shadow
8) The first line of the /etc/shadow file is the one you want to modify.
It looks like this:
root:c3.yAVmYodWsc:6445::::::
9) Delete every character between the first and second colons in the first line of the file. When you finish deleting the characters, the line should look like this:
root::6445::::::
10) Press the Escape key, then enter the following to save the file and exit vi:
:wq!
11) Use the VI text editor to edit the /etc/system file andremove the "rootdev" line shown below:
# vi /a/etc/system
*rootdev:/pseudo/md@0:0,0,blk
Don't comment out the "rootdev" line. Actually remove it.
12) In the /a/etc/vfstab file, replace the lines for the system filesystem meta-devices with their underlying partitions. For example, change lines from
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
to
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
ONLY change the lines for root (/) and the filesystems that were affected by the actions you took in step 1 of this procedure. All other metadevices may stay as is in this file.
13) Unmount root, check the root filesystem, and then stop the system:
# cd /
# umount /a
# fsck /dev/rdsk/c1t0d0s0
# stop-a
14) Boot to single-user mode:
ok boot -swTHIS STEP IS VERY IMPORTANT; YOU MUST BOOT TO SINGLE-USER MODE TO AVOID FILESYSTEM CORRUPTION.
If the system does not boot to single user mode, you might have made a mistake in the previous steps.
15) Because the root password was cleared in an earlier step, press Return when prompted for the the root password. Once you are in single-user mode, you must clear the metamirrors and all the sub-mirrors for the root filesystem. For example, if root (/) is d0, run the following command:
# metaclear -f -r d0
Running the metaclear command not only clears the metamirror but also clears the submirrors that are part of this mirror.
16) When the metamirror is cleared, continue the boot up to multiuser mode by either pressing CTRL-D or by entering the following:
# exit
Now everything should be as it was, except that the system partition is on the underlying partition and isn't mirrored. You will simply need to re-create the metadevices for the root mirror as you had originally.
many thanks

Hi,
Halt your machine.
Boot with fail-safe mode.
format and list out the disks. (You can get the root & mirror disk (c#t#d#) details from /etc/lvm/md.tab of your root or mirror disk. Earlier explorer output may help)
Mount the root disk and remove the password entry in /etc/shadow
umount it.
Mount the mirror disk and remove the password entry in /etc/shadow
umount it.
reboot the server.
Hope this helps!

How to delete the record in the table without using lead selection?

hi,
I have added the separate column "delete" to the table uielement and so for each record or row of the table the appropriate "delete" link to action will be there................the code below works when the particular row is selected through lead selection only.......
help me how to delete without using lead selection.....
DATA:
NODE_MODULE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_MODULE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_MODULE TYPE IF_V_MODULE=>ELEMENT_MODULE .
 data itab TYPE TABLE OF zac_modules.
navigate from <CONTEXT> to <MODULE> via lead selection
NODE_MODULE = WD_CONTEXT->GET_CHILD_NODE( NAME = `MODULE` ).
get element via lead selection
ELEM_MODULE = NODE_MODULE->GET_ELEMENT( ).
get all declared attributes
ELEM_MODULE->GET_STATIC_ATTRIBUTES(
 IMPORTING
 STATIC_ATTRIBUTES = STRU_MODULE ).
NODE_MODULE->GET_STATIC_ATTRIBUTES_TABLE(
 IMPORTING
 TABLE = itab )
DELETE itab WHERE zmodule_id = STRU_MODULE-zmodule_id.
CALL METHOD NODE_MODULE->BIND_TABLE
 EXPORTING
 NEW_ITEMS = itab
 SET_INITIAL_ELEMENTS = ABAP_TRUE
 INDEX =
ENDMETHOD.

Hi ,
The onclick event provides you with a standard paramater "CONTEXT_ELEMENT" which has the element from which the event is triggered.
so you can declare this in the handler(if it is not there) and use it as follows.
CONTEXT_ELEMENT TYPE REF TO IF_WD_CONTEXT_ELEMENT an importing paramater.
DATA:
NODE_MODULE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_MODULE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_MODULE TYPE IF_V_MODULE=>ELEMENT_MODULE .
data itab TYPE TABLE OF zac_modules.
CONTEXT_ELEMENT->GET_STATIC_ATTRIBUTES(
IMPORTING
STATIC_ATTRIBUTES = STRU_MODULE ). "Using the context_element paramater to get the static attributes.
NODE_MODULE->GET_STATIC_ATTRIBUTES_TABLE(
IMPORTING
TABLE = itab ) "getting all the data.
DELETE itab WHERE zmodule_id = STRU_MODULE-zmodule_id. "deleting the particular row from the table and binding it.
CALL METHOD NODE_MODULE->BIND_TABLE
EXPORTING
NEW_ITEMS = itab
* SET_INITIAL_ELEMENTS = ABAP_TRUE
* INDEX =
thanks,
Aditya.

How to delete duplicate records in cube

Hi,
can u help me how to delete the duplicate records in my cube
and tell me some predifined cubes and data sourcess for MM and SD modules

Hi Anne,
about "duplicate records" could you be more precise?.
The must be at least one different Characteristic to distinguish one record from the other (at least Request ID). In order to delete Data from InfoCubes (selectively) use ABAP Report RSDRD_DELETE_FACTS (be carefull it does not request any confirmation as in RSA1 ...).
About MM and SD Cubes see RSA1 -> Business Content -> InfoProvider by InfoAreas. See also for MetadataRepository about the same InfoProviders.
About DataSources just execute TCode LBWE in you source sys: there you see all LO-Cockipt Extrators.
Hope it helps (and if so remember reward points)
GFV

How to delete a particular row in ALV table

Hi,
How to delete a particular row in ALV table based on some condition(by checking value for one of the columns in a row)
Thanks
Bala Duvvuri

Hello Bala,
Can you please be a bit more clear as to how you intend to delete the rows from your ALV? By the way deleting rows from an ALV is no different from deleting rows from a normal table. Suppose you have enabled selection property in ALV & then select multiple rows and click up on a button to delete the rows then below would be the coding: (Also keep in mind that you would have to maintain the Selection property of the context node that you are binding to your ALV to 0..n)
data : lr_table_settings TYPE REF TO if_salv_wd_table_settings,
             lr_config          TYPE REF TO cl_salv_wd_config_table.
lr_table_settings ?= lr_config.
** Setting the ALV selection to multiple selection with no lead selection
lr_table_settings->set_selection_mode( value = cl_wd_table=>e_selection_mode-multi_no_lead ).
Next delete the selected rows in the action triggered by the button:
METHOD onactiondelete_rows .
DATA: wd_node TYPE REF TO if_wd_context_node,
         lt_node1 TYPE ig_componentcontroller=>elements_node,
         wa_temp TYPE REF TO if_wd_context_element,
         lt_temp TYPE wdr_context_element_set,
         row_number TYPE i VALUE 0.
wd_node = wd_context->get_child_node( name = 'NODE' ).
CALL METHOD wd_node->get_selected_elements
    RECEIVING
      set = lt_temp.
LOOP AT lt_temp INTO wa_temp.
    wd_node->remove_element( EXPORTING element = wa_temp ).
ENDLOOP.
CALL METHOD wd_node->get_static_attributes_table
    EXPORTING
      from = 1
      to    = 2147483647
    IMPORTING
      table = lt_node1.
wd_node->bind_table( new_items = lt_node1 ).
ENDMETHOD.
If in case this isn't your requirement please do let me know so that I can try come up with another analysis.
Regards,
Uday

*HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*

HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
My archivelog files are not deleted on standby.
I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
J

Setting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
like to clean them off with RMAN.
I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
Example :
#!/bin/bash
# Name: db_rman_arch_standby.sh
# Purpose: Database rman backup
# Usage : db_rman_arch_standby <DBNAME>
if [ "$1" ]
then DBNAME=$1
else
echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
exit 1
fi
. /u01/app/oracle/dba_tool/env/${DBNAME}.env
echo ${DBNAME}
MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
exit
EOF
echo `date`
echo
echo 'End of archive cleanup on STANDBY'
mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
# End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
Example ( STANDBY.env )
ORACLE_BASE=/u01/app/oracle
ULIMIT=unlimited
ORACLE_SID=STANDBY
ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
LIBPATH=$LD_LIBRARY_PATH:/usr/lib
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
#export TERM=linux=80x25 wrong wrong wrong wrong wrong
export TERM=vt100
export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
export ORACLE_HOME
export LIBPATH LD_LIBRARY_PATH ORA_NLS33
export TNS_ADMIN
export PATH
export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
There are probably ten other/better ways to do this, but this works.
other options ( you decide )
Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
Best Regards
mseberg
Edited by: mseberg on May 8, 2012 11:53 AM
Edited by: mseberg on May 8, 2012 11:56 AM

How to delete a local file in the presentation server.

Hi All,
How to delete a local file in the presentation server. As we do using 'delete dataset dsn' in application server. How can i achieve this. My requirement is after uploading file using gui_upload, i want to delete that source file. Please let me know, how can i achieve this.
Thanks in advance.
Regards,
Vishal

data: l_rc type i.
data: f_name type string.
 move 'c:\YourFile.txt' to f_name.
 CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_DELETE
 EXPORTING
 FILENAME = f_name
 CHANGING
 RC = l_rc
 EXCEPTIONS
 FILE_DELETE_FAILED = 1
 CNTL_ERROR = 2
 ERROR_NO_GUI = 3
 FILE_NOT_FOUND = 4
 ACCESS_DENIED = 5
 UNKNOWN_ERROR = 6
 NOT_SUPPORTED_BY_GUI = 7
 WRONG_PARAMETER = 8
 others = 9
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.

Error while generating export datasource in Test and Prod system

Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
System setting does not allow changes to be made to object ISTD 80CRM_PRI.
while Prod system produces teh follwoing error msg
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DV

Hi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

How to: Deleting a Exported Datasource

Similar Messages

Maybe you are looking for