FBCJ check withdrawal line item
I have a problem in fbcj
I have posted check receipt entry in fbcj check receipts tab successfully.
while present check it was not generated ceck withdrawel line item and lot status is check withdrawal line item saved.
I have to change this status.
is there any solution to change this otherwise any other procedure.
HI,
To trigger user exit form pool (ZRGGBR000) you need to do setting in OB28 and activate it.
Regards,
Sri
Similar Messages
-
Check/Validate Line item Amount against Credit Balance of Customer in FBL5N
Hi ,
I need to Check/Validate Line item Amount BSEG -WRBTR (Screen 301, Prg. SAPMF05A ) in F-02 against Credit Balance of Customer in FBL5N.If amount entered in F-02 with posting key 01 and same company code is greater than total credit balance with customer ,then i need to pop up error message.
I have tried this with GGB0 using my own exit incl & including ZRGGBR000 in neccesay customization.Still not working.
Pls suggest a solutiion for this
Regds,
abhee
Edited by: abheesawant on Jul 29, 2010 6:59 AMHI,
To trigger user exit form pool (ZRGGBR000) you need to do setting in OB28 and activate it.
Regards,
Sri -
How to check plan line items for plan cost at network activity level?
Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
JessieHi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit -
To check maximum line items in P/o
Dear friends,
I hv a p/o of 5000+ line items but while updating, the system is accepting only 999 items & not saving data more than this.
The p/o item number series starts with 1 so ideally the system should accept 99999 or atleast 9999 line items.
Can u pls advise where to check these settings and how to amend it ?
Thank you
Prashant BijutkarDear Prashant,
Ideally it will update only 333 as because once you do the GR for the corresponding PO accounting document is restricted upto 999
for everyline in accounting document it creates 3 line items in accounting as below.
Dr : stk
Cr : POR
CR: PO Var
Because of this you can update only 333 line. If you want to increase the number of lines then you have to amend the Standard SAP table for which SAP won't support.
Solution : Create multiple PO's breaking the number of line items to 333.
Hope this helps.
Regards,
Sreekanth -
Credit Check at Line Item Level
We are trying to carry out credit checking at the line item level. So that user can release each line item from VKM1 or VKM3. Need to know how to achive this does any boday know any enhancements or notes we can apply to achieve this as Standard SD only has credit checking at the document level.
Hi,
This is a requirement user wants each line item should be released by VKM1 and VKM3.
I am looking for any user exit or enhancement which does this
Thanks
Krushnakumar -
Restrict Availability check for Line item in sales order
Hi Folks,
My requirement is some what different than the usual,I want to stop availability check for a particular line item,while creating sales order on a particular condition (example when quantity is changed for that line item),please suggest if there is any way to do so.
Thanks for your valuable support.Hi
we need to maintain the username of the person who has triggered this process through XI .
I BAPI we cannot instruct the BAPI to maintain a specific username.
that is why i am using this FM because this will allow us to maintain the change history with the username we want
Regards
Nikhil -
Is Credit Check Per Line Item in Sales Order Possible?
Dear All,
Hope you all are doing well !!!
Infact i am currently implementing OPM and SCM modules for a CSD (carbonated soft drinks) industry. They have a specific requirement on Credit Management. Please look at the Requirement Below.
Credit Management Per Line on SO
Client Charges Distributors for both Liquids (Finished Product) + [Return Glass Bottles and Shells) for the First Time.
Subsequently while returning RGB(Return Glass Bottles)'s and Shell's are being given Credit memos.
CBL gives credit only on Bottles & shells but not on Liquids.
For Liquids CBL takes the Prepayment & Its Compulsory.
So the Credit limit needs to be check on the bottles and shells only.
Oracle E-Business Suite Credit Management does not work per line item for a
Particular Sales Order. It works on total Sales Order. as this is not a standard Process in Oracle how we can achieve this without customization.
Please suggest me through any workaround we can achieve this and its a show stopper for us and business critical for my client.Please help me on this regard.
Thanks & Regards,
AdityaI'd suggest writing your own might be easier. Oracle buckets the exposure as per the list below whereas you are probably only interested in seeing a total order exposure (by line item for bottles/shells) and total AR exposure summary.
Also the standard report will look at the unit sell * the ordered quantity in calculating transaction amounts on open orders which is your problem. If I've understood your requirement correctly, you only want to consider the shells and bottles in the credit check because you enforce prepayment for liquids so presumably your AR o/s balances are only for money owing on shells and bottles.
In that case, your only real issue is at the order entry stage (again because Oracle will be considering the total transaction value if you're using the standard automated credit check) which is why I suggested the manual workaround there.
1 Header uninvoiced orders
2 Header uninvoiced orders tax
3 Line uninvoiced orders
4 Line uninvoiced orders tax
5 Line uninvoiced freight
6 Header uninvoiced freight
7 Header and line freight
8 Invoices
9 Payments at risk
10 Order holds
11 Line holds
13 Order tax holds
14 Line tax holds
15 Order freight holds
16 Line freight holds
17 Header and line freight holds
18 External exposure
21 G_BR_INVOICES
22 G_BR_PAYMENTS_AT_RISK
23 G_HEAD_RETURN_UNINV_ORDERS
24 G_LINE_RETURN_UNINV_ORDERS
25 G_ORDER_RETURN_HOLDS
30 G_ORDER_RETURN_HOLDS
31 G_LINE_RETURN_HOLDS -
Credit Check Per Line Item in Sales Order is Possible?
Dear All,
Hope you all are doing well !!!
Infact i am currently implementing OPM and SCM modules for a CSD (carbonated soft drinks) industry. They have a specific requirement on Credit Management. Please look at the Requirement Below.
Credit Management Per Line on SO
Client Charges Distributors for both Liquids (Finished Product) + [Return Glass Bottles and Shells) for the First Time.
Subsequently while returning RGB(Return Glass Bottles)'s and Shell's are being given Credit memos.
CBL gives credit only on Bottles & shells but not on Liquids.
For Liquids CBL takes the Prepayment & Its Compulsory.
So the Credit limit needs to be check on the bottles and shells only.
Oracle E-Business Suite Credit Management does not work per line item for a
Particular Sales Order. It works on total Sales Order. as this is not a standard Process in Oracle how we can achieve this without customization.
Please suggest me through any workaround we can achieve this and its a show stopper for us and business critical for my client.Please help me on this regard.
Thanks & Regards,
AdityaI'd suggest writing your own might be easier. Oracle buckets the exposure as per the list below whereas you are probably only interested in seeing a total order exposure (by line item for bottles/shells) and total AR exposure summary.
Also the standard report will look at the unit sell * the ordered quantity in calculating transaction amounts on open orders which is your problem. If I've understood your requirement correctly, you only want to consider the shells and bottles in the credit check because you enforce prepayment for liquids so presumably your AR o/s balances are only for money owing on shells and bottles.
In that case, your only real issue is at the order entry stage (again because Oracle will be considering the total transaction value if you're using the standard automated credit check) which is why I suggested the manual workaround there.
1 Header uninvoiced orders
2 Header uninvoiced orders tax
3 Line uninvoiced orders
4 Line uninvoiced orders tax
5 Line uninvoiced freight
6 Header uninvoiced freight
7 Header and line freight
8 Invoices
9 Payments at risk
10 Order holds
11 Line holds
13 Order tax holds
14 Line tax holds
15 Order freight holds
16 Line freight holds
17 Header and line freight holds
18 External exposure
21 G_BR_INVOICES
22 G_BR_PAYMENTS_AT_RISK
23 G_HEAD_RETURN_UNINV_ORDERS
24 G_LINE_RETURN_UNINV_ORDERS
25 G_ORDER_RETURN_HOLDS
30 G_ORDER_RETURN_HOLDS
31 G_LINE_RETURN_HOLDS -
Check different line items supplying plant in stock transfer order
Dear All,
I want to apply a check with error message if the line itmes in a stock transfer order is not belonging to same supplying plant.
i.e. a str is created with various line items having receiving plant same but supplying plant is different. Now when i m creating a stock transfer order with reference to same stock tranfer requisition the system allows to create the stock trsfer order.
But i want to check that only line items having same supplying plant will allow to create the stock transfer order else dipaly an error message.
Plz suggest.
Edited by: sdrakesh84 on Jun 11, 2011 8:18 AMHi,
this is one of the problems caused by an organisation structure that is not quite matching the "real world".
In SAP each Plant should have a unique address and the storage locations are thought of as areas within that address.
If you have two sites that have different addresses, they should <u>ideally</u> be separate plants. You can then use all of the available functionality within SAP that you would expect.
If you want to set up a route that goes from one address to another than this is possible, but in your case you are actually saying that you want a route for s delivery from and too the same address, not really a real world scenario.
So if you really want to do this then each site should be a plant. I expect that it is too late to change your design but it is important for others reading this to understand the problems that are caused when Storage locations are used instead of Plants for physically separate addresses.
Sorry if this is not much help to you but it should help you to understand why you are having a problem.
Steve B -
Balance(total) and line items balance difference in FS10N
Dear All,
We are facing an eccentric issue. When we execute transaction FS10N for a particular account,(outgoing cheque account) the balance it is showing is 497,241,737.46. But when we drill down to see the line items balance, it shows a different balance 497,248,376.46. The line items balance is matching with the FBL3N report.
Can anyone help me for the issue why we are getting different balances in FS10N.
Regards
VinuHello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi -
AP Line-Item Report for State Auditors
Dear Members,
I am preparing one Report named AP Line-Item Report for State Auditors and i need the following fields in my report.
Check Number PAYR-CHECT
Voucher Number BSEG-BELNR
Check Date PAYR-ZALDT
Voucher Date BKPF-BUDAT
Vendor Number LFA1-LIFNR
Vendor Name ADRC-NAME1
Vendor Street Address ADRC-STREET
Vendor City ADRC-CITY1
Vendor State ADRC-REGIO
Vendor Zip Code ADRC-POST_CODE1
General Ledger Acct No BSEG-HKONT
Purchase Order Number BSEG-EBELN
Tax Status Code BSEG-MWSKZ
Taxable Amount BSEG-HWBAS
Exempt Amount BSEG-MWSTS
Tax BSEG-MWSTS
Tax Accrued BSEG-MWSTS
Total Invoice BSEG-DMBTR
I am new to FI.So I request some one please let me know which datasources contain the above fields and which CUBE is best suited for this.
Thanks in Advance for help and quick reply is much much appreciated.
Best Regards
RC0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table. -
Few line items are not coming at the time of creation of delivery
Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan SHi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa -
Line items are not coming on next page in Bill of Lading
When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
Kindly help me to resolve the issue as it is very critical.Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa -
Designing the consolidated and line item report for specific material
Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table. -
KR doc type posted without vendor line item a mandatory item category
Hello Gurus,
We have SPL document splitter activated in our ECC system. We have the business transaction variant 0300 / Z001 assigned to doc type KR. The vendor line is obligatory in the above business transaction variant (BTV). THe splitting rule is also assigned for this BTV.
THe problem is that despite having the vendor as obligatory for this BTV, we are able to post the doc type KR (vendor invoice) without the vendor line item e.g.. doc with doc type KR and debit and credit to expense a/c.
Please share your experience if anyone has come across this issue,
PrakashHi,
To make the vendor line mandatory for KR document type, you can write the validation as below:-
Step 1:-
Create a message ID via transaction code SE91 for message class /EACC/MSG/ACC_COMP as you want to display to user.
Step 2:-
Go to transaction GGB0 and create the validation step at complete document level in Financial Accounting as below:-
Pre Requisits:-
BKPF-BLART = 'KR'.
Check:-
Create a exit code using user exit and check that line items have at least one vendor line item.
For this take the help of ABAPer and create a copy of the program RGGBR000 and code your check here and assign to the application area GBLR in view V_T80D via transaction code SM30.
Message:-
Message created in step 1 as error message.
Step 3:-
Please also check that this validation has active status (Status=1) at line complete document level (level 3) for your company code in transaction OB28.
Regards,
Gaurav
Maybe you are looking for
-
Something weird happening with View Options....
Hi!, OK, so I go into my hard drive root (where the library, users, system folders are). I go to the View menu and choose Show View Options. In that small panel, I check the Show Item info checkbox so that it shows me all the info about folders. I en
-
Cannot start services in Mewdia Center (errors 0x80070005 and 70006)
I have an HP Touchsmart IQ506 desktop with integral TV tuner. I recently did a system recovery (not restore) to Vista and upgraded to Win7 with my disc, then to SP1. The computer searched for the tuner, but no luck. I looked to the services, and they
-
Wifi and iphone (standard behavior or not)
hi, each time that my iphone is paused wifi conection is closed. Is that a standard behavior ??
-
I can't find the "store menu" on iTunes to authorize my computer
I can't fine the "store menu" on my Windows iTunes in order to authorize my computer.
-
cambiar a 64 bit para trabajar autocad 2013