How to deploy a MDBean into cluster with only one JMS server instance running on one of the cluster servers

          I am trying to deploy a MDBean in my cluster ( two servers). The MDBean requires
          the destinestion has to each cluster server. It means that I have to deploy my
          JMS server over the cluster. This will result multiple destinations (queue or
          topic) are created.
          Is there a way to run one JMS server with a clustered MDBean?
          Thanks,
          Taohe

Check out my posting from 4-3 in this thread.
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=5&jump=true
I think I may have answered your question before you asked it.
In that example I use the picture control to manipulate a bunch of rectangular images of booleans.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

How do i make a slideshow lightbox with only one main image

Hi all,
i was wondering How do i make a slideshow lightbox with only one main image being seen on the page and once clicked the lightbox will open and have multiple images viewable from prev/next buttons with comments.
Reason being is i want have a portfolio page with my work all viewable from that one page so i will have say 10 lightboxes on the page but all with one master image.
Cheers,
Chris

hello
I have the same problem... Its so basic thing and is it really missed in muse ?

Importing m2t into iMovie with only one conversion

Ok, so m2t files have been beaten to death in these forums, but I'm still puzzled. Here's my situation. I have a Canon HV20 and only replay the tape once to avoid wear and save time (really?). So I capture to m2ts. Fine. Now I'd like to be able to use these in iMovie with only one conversion. I can convert the stream to a framed (QT) format like AIC. But I'd like to do this just once. Meaning, when I convert clip.m2t to clip.mov I'd like to drag this to iMovie and have iMovie just "copy" an not import/convert. Can I convert to a format where I can just drag to the media folder in the given iMovie project?
For those watching. My toolchain is
1. rewind the tape
2. capture with HDVsplit (win), DVHScap (mac), or whatever
3. split/clip the m2t files with HDVsplit (win) or MPEGstremclip (mac/win), or HDVxDV (mac) and leave as m2t
4. convert the m2t clips I want in my movie to QT+AIC
5. import these QT+AIC .mov clips into iMovie
6. edit
I'd like to optimize 4 and 5. (And by the way, someone should port HDVsplit to mac.)
Thanks,
WL

Matti Haveri wrote:
MPEG Streamclip allows you to export as QuickTime with Apple Intermediate Codec (also QT Player can do this but I prefer MPEG Streamclip for these tasks). I think you should set the resolution to 1440x1080 because that's what iMovie uses internally for 1080i.
I did a quick test and iMovie seems to accept such AIC-encoded .mov files directly to its Media folder. But run some tests through your complete workflow before trusting this will work!
Ok this was helpful. If I take 1440x1080 QT/AIC output from MPEGstreamclip, I can efficiently copy the file in the project. Works like a charm and looks great in iMovie. (I can also now take the 1920x1080 QT/AIC output from streamclip and do the same; not sure what change there. I did a test on a 1:24 length mpeg-2 stream. The 1440x1080 with and without deinterlacing were 700MB and 600MB respectively, while the 1920x1080 is at 800MB. So it makes sense to do 1440x1080 since iMovie handles it fine.)
In summary (hope this helps someone), here's what I do:
0a. Macbook with iMovie HD
0b. LaCie macos formated external drive drive (hfs+)
0c. Canon HV20 filmed at 1080i (not sure what do with the 24p cinemode)
1. use DVHScap (mac) to capture the stream from the HV20. This gives file.m2t, for example. This can be viewed with VLC, for example. (on windows use HDVsplit to capture). Copy the m2t file to the external drive.
2. now use MPEGstreamclip to disect the m2t file. use the 'i' and 'o' to mark inputs and outputs and then "save as". Save this as file_clip.ts for example. The .ts is the same as an .m2t file, so save it as either.
3. now you should have 1 or more file_clip.ts depending on how many times you do step 1 and 2.
4. use MPEGstreamclip in batch mode to take the file_clip.ts or m2t files and "export to Quicktime". Select Apple Intermediate Codec as the type compression type. Yank the quality up to 100%. Select 1400x1080 (4:3) as the frame size and click "deinterlace video" (my opinion on the deinterlacing). Save the movie on the external drive as file_clip.mov.
5. now start a new iMovie HD project and save the project to the external drive. Quit iMovie. open-apple-click on the myproject.iMovieProject to "show package contents". After this you can move your file_clip.mov files to the media directory under this package. A move is best since copy does an actual copy. Move just moves a pointer.
6. start up iMovie and view the trash can when prompted ("Some stray files were found in the project...."). Now drag the trash files to the clips area in iMovie.
7. now edit.
This is a nice approach for a couple of reasons. The .m2t files are great storage formats. The conversion from mpeg-2 stream (m2t) to a framed format like QT+AIC (mov) is done +only once+. And the quality is maintained. Also, I can do this all to an external harddrive, which is nice since I'm limited on my macbook.
I don't have HD gear. Currently I archive SD DV to tape and to big harddisks. In the future I would like to continue to archive HD content in its native compressed (non-AIC) form. Obviously this works via DVHScap, right?
Yes. The m2t files are a great archival format. The 1:25 long clip above was only 275MB while the framed formats were 3 times that. The stream saves differences so it's a lot more efficient (but you don't have frames for editing). VLC is also quick as quick for viewing these. DVHScap never drops any packets (mpeg-2) when capture (for me at least). HDVsplit is also great, but only for windows. HDVxDX also worked like a charm.
Well anyway, thanks for the chatter.
Nate

Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="staging.local"/>
    <Domain Name="staging.local"/>
    <IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to compare sales of 2 dates with only one date is given?

I am having a requirement such that the user wants to see the particular company Y2D sales of this year and previous year, and only one variable selection is given (today's date). How can i design the report to see this year sales and last year sales in separate columns?

Hi ,
You have to create two RKFs.
In the first RKF , you have to create a customer exit variable on your date and that too it should be interval . Using the CMOD code , populate this interval from the 1st day of this year till the date user is entering .
In the second RKF , you have to create a customer exit variable on your date and that too it should be interval . Using the CMOD code, you have to populate the interval from the 1st day of the previous year till the same date as entered by user but it should be of last year .
You have to write the above 2 codes in I_STEP = 2 mode .
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

How many laptops can I install on with only one lightroom 6 license? (not cc version)

I read from somewhere that one creative cloud account can be used on two different devices, but what about the lightroom 6 version?
If I pay $149 for lightroom 6, how many laptops can I install on? I now have one windows laptop and one mac.
Thanks for helping.

I selected yours as the correct answer because of the webpage you provided, but I cannot understand that what "only use it on one computer at a time".
If the software is for offline use, how does it know if I'm running it on another computer?

How do I get firefox to open with only one tab I accidentally saved when I had more than 1 tab open now it opens too slowly and I want to change it back

when I first installed and used firefox I went to close and did not realize that I had an additional tab open and it asked me if I wanted to save I clicked the yes when I meant to not save. Now I can not find anywhere that will let me unsave the extra tab so that it will not open everytime I open firefox

If you only have the Firefox button then press F10 to get the Menu Bar or go to Firefox > Options > Options > General > Startup
See also [[How to set the home page]]

How to visually (!) remove "sequence" frame with only one activity inside?

Due to previous manipulations it could happen, that there are sequences (=visual sequences frame)
which contain only one activity.
These sequence frames are needless.
Ok, I could remove them directly in source code.
But is there a way to remove them visually WITHOUT removing then inner activity as well?
Peter

If I would have to do that, I will drag the activity outside the sequence and delete the sequence.

How to read a CLOB file and select only one of the node

i have table with one of it's datatyp as CLOB, i need to read one particular node alone,
Ex
Table tesxml has two columnd id,xml and the xml field is a CLOB which has data as shown below.
<?xml version="1.0" encoding="UTF-8"?>
<alert>
     <type0 comment="section in XSL component" name="Initial Information">
          <details>
               <Priority>0001</Priority>
               <Date>2010-06-29</Date>
               <Initial_Information></Initial_Information>
          </details>
                  </type0>
</alert>now i need to select id,<Date value(from xml)>,<comment value>
o/p should look like
0000,2010-06-29,section in XSL componenti tried these queries but i am doing something wrong with the syntax..
SELECT alert_internal_id,EXTRACTVALUE(VALUE(c), '/Date') datee
FROM (SELECT id,xmltype(xml) xml FROM tesxml),
       table(XMLSEQUENCE(EXTRACT(xml, '/alert/type0/details/'))) c;
select dbms_lob.read(HTML_FILE_KEY,alert,type0,details,Date) from alerts

Depakjan wrote:
No that is not the case if i just remove the where statement it's workingWell, based on your query, you don't seem to have a repeating group, so I'm guessing your XML looks something like the following:
SQL> ed
Wrote file afiedt.buf
1 with alerts as (select 1 as alert_internal_id,
2 '<alert>
3    <tab0 comment="bob">
4      <details>
5        <Priority>1234</Priority>
6      </details>
7    </tab0>
8    <type0>
9      <details>
10        <DateVRUClaimInitiated>01/02/2010</DateVRUClaimInitiated>
11      </details>
12    </type0>
13 </alert>' as xml from dual)
14 --
15 select alert_internal_id,x.* from alerts, xmltable ('.' passing XMLTYPE(xml)
16               columns prio varchar2 (5) path '/alert/tab0/details/Priority',
17                       dt varchar2 (15) path '/alert/type0/details/DateVRUClaimInitiated',
18                       type_comment varchar2 (25) path '/alert/tab0/@comment') x
19* where x.dt is not null
SQL> /
ALERT_INTERNAL_ID PRIO DT              TYPE_COMMENT
                1 1234 01/02/2010      bobHowever, let's assume you do have a repeating group of alerts (I'll achieve that by putting them inside a "root" element), and I'll set one of them so there is no dt returned...
SQL> ed
Wrote file afiedt.buf
1 with alerts as (select 1 as alert_internal_id,
2 '<root>
3    <alert>
4      <tab0 comment="bob">
5        <details>
6          <Priority>1234</Priority>
7        </details>
8      </tab0>
9      <type0>
10        <details>
11          <DateVRUClaimInitiated>01/02/2010</DateVRUClaimInitiated>
12        </details>
13      </type0>
14    </alert>
15    <alert>
16      <tab0 comment="jim">
17        <details>
18          <Priority>2222</Priority>
19        </details>
20      </tab0>
21      <type0>
22        <details>
23          <DateVRUClaimInitiated />
24        </details>
25      </type0>
26    </alert>
27 </root>' as xml from dual)
28 --
29 select alert_internal_id,x.* from alerts, xmltable ('root/alert' passing XMLTYPE(xml)
30               columns prio varchar2 (5) path '/alert/tab0/details/Priority',
31                       dt varchar2 (15) path '/alert/type0/details/DateVRUClaimInitiated',
32                       type_comment varchar2 (25) path '/alert/tab0/@comment') x
33* where x.dt is not null
SQL> /
ALERT_INTERNAL_ID PRIO DT              TYPE_COMMENT
                1 1234 01/02/2010      bob
SQL>That works ok for me. Database = 10.2.0.1
What version are you on?

Rescue and Recovery with only one partition, what will happen? Thanks!

Hello, everyone! This is my question: If I do a clean installing of Windows 7 with only one partition(the C and I install the Rescue and Recovery tool, when I make a backup of the system by using the Rescue and Recovery then the backup file will be stored in the partition C:. So when I restore the system with the backup file later, if I can succeed and what will happen? Thanks.
Solved!
Go to Solution.

Backups and restores will still work. The risk is if something happens to your hard drive, then you would lose the backups as well. For this reason it's a much better idea to store your backups somewhere else, such as USB hard drive or network.

Design Problem : How to design/code a java client which is deployed to all the machines in a cluster and make sure that only one of the java client is active

          hi ,
          I have to design a java client (which is basically a JMS message listener)which
          is deplloyed to all the servers in the cluster. But as these are message listeners,
          i want only one of the instance to be active at a time.
          If the server on which the client is active goes down , I want the second server
          to start listening to messages.
          How do i design this ? Also is there a public api for multicasting that we can
          use ?
          Anybody has an idea on how to go about this..
          Thanks
          nisha


Hi Nisha,
          Failover message listeners? Sounds like you want MDBs, which are deployed on all nodes in a
          cluster. If your JMS destination is a queue, then only one MDB will pick up the message. And just
          like any other ejb service, MDBs failover.
          Gene
          "Nisha" <[email protected]> wrote in message news:[email protected]..
          hi ,
          I have to design a java client (which is basically a JMS message listener)which
          is deplloyed to all the servers in the cluster. But as these are message listeners,
          i want only one of the instance to be active at a time.
          If the server on which the client is active goes down , I want the second server
          to start listening to messages.
          How do i design this ? Also is there a public api for multicasting that we can
          use ?
          Anybody has an idea on how to go about this..
          Thanks
          nisha

How can I load data into table with SQL*LOADER

how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)

Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961

How to make 1D Array but with only one element filled in Real Time

Hi folks,
here I am with another question. I want to implement an prediction discrete state space observer which is going to run on a CRIO real time target. I am going to do it just like in the example which comes with LV.
I have some questions regarding the input and outputs which in the example those are "dummy".
My model is a SISO model, but the function "Construct SS model" returns parameters (A,B,C,D Matrices) as 2D arrays, so once you connect the cluster model into the Discrete Observer model, it takes y and u as 1D arrays despite of the fact that there is a SISO model.
I realized that the function I am using in the simulations, uses 1D arrays but with only one element filled:
Does anyone knows how to implement such 1D arrays in Real Time? I guess the way to do it is preallocating one array of zeros of size 1, and then recirculating it through some SR, and replacing the element with my real input and output, but at the dummy.vi, they are using a simple "build array"
function.

Ok, I did it that way. But I am facing another problem right now...
At some point the Discrete Observer return a NAN array, you will see the code in the code snippet?
I get rid of that component by component, but the observer gets "stuck" in it. So my Control law is zero... but the state stimate is NAN.
Also I am attaching the VI.
I do not know why, since in the simulation program all runs well. any thoughts? Maybe the internal numeric precision of the State Space Model?
Attachments:
RT - Pole Placement + Complete Observer.vi ‏40 KB

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Working in Logic 9, how do I use a drum loop WITH ITS PRESET EFFECTS? I can drag and drop the loop but it plays dry in timeline. thanks

Here's the short-cut solution:
Green Apple tracks are MIDI files (so to speak). If you drag one from the loop browser (Capitol C Orchestral hit, as you mentioned in this exable) directly into the arrange page it creates the MIDI file and the instrument to play it back on.
HOWEVER.If you create and audio track first, THEN drag the green Apple loop onto that track, the loop will get "bounced" with the reverb in tact and you'll have the exact sound that you heard in the preview.
Make sense?

How can i create a new user with only read rights ?

How can i create a new user with only read rights ?

You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null

How to deploy a MDBean into cluster with only one JMS server instance running on one of the cluster servers

Similar Messages

Maybe you are looking for