How to deploy and use TDMS for ECC
Hello All,
We have a requirement of doing the system refresh from our production database using TDMS.
Please suggest how to use and deploy this tool
I am very new to it
Rohit Goyal
Hi,
check SAP Note 1003051 - TDMS 3.0 corrections - Composite SAP Note
Also, check master and operation guide on https://websmp107.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000689101
For this you have to first decided which will be your receiver, sender and control/central system. Then you have to install TDMS add-on's on all participating system. Then you can execute transaction CNV_MBT_TDMS to start data transfer from central/control system.
This is very high level. I will suggest you to go through the guides.
Thanks
Sunny
Similar Messages
-
How to create and use scales for DAQ-6014 in Labview?
Hello,
In my application, I use the DAQmx-driver to read the 16 analog input terminals of my DAQ-Card. I create a task with all the 16 channels and define for each channels the input domain (from 0 to 10V) and configure them as NRSE. Then I configure my task to measure the waveforms during 10s with 1000 Hz each time I need it.
The waveform I measure are raw data and I need to scale them to get a mesurement with physical signification. This is actually done after each measure, which costs a lot of time (almost 5 seconds). Then I tried to use the DAQmx Create Scale.vi to create scales and attach them to the channels during my task creation. The creation of scale works fine and I can attach them to the channels. But when I do my measure, I get the raw data - unscaled.
I have no idea, what I am doing wrong. I look for some examples on how to use the DAQmx Create Scale.vi but I can't find none.
Does anybody already have some experiences with this VI?
Cheers,
OlivierHi,
May be I don't get exactly what you mean with:
"Right click On DAQmx read and check the options with DAQmx AI read (it is a polymorphic VI) ."
I set the DAQmx read polymorphic VI to the option "Analog 1D Wfm NChan NSamp".
Anyway, I send you 3 VI:
- NIDAQ_6014_CreateScales.vi: where I create my scales
- NIDAQ_6014_StartAIN_Scaled.vi: where I create my task and use the scales
- Measure.WaveFormReader.vi: where I read my data
May can you see what is wrong.
Cheers.
Attachments:
Measure.WaveFormReader.vi 39 KB
NIDAQ_6014_CreateScales.vi 22 KB
NIDAQ_6014_StartAIN_Scaled.vi 29 KB -
How to create and use tabs for WD views
Hi,
I have created two views. A button click from onw view leads to the second view and vice versa.
I would like to add tabs to the two views, in a way that when pressing the button on the first view - the second one will open, and the tabs of both views will be seen, in a way that will enable me to navigate between the views using the tabs.
Is this possible to do? or must I implement one view with a tab strips? (whcih means - rewriting the secod view into the first...)
Thanks,
Oren.Hi
There is no need to use inbound outbound plugs and navigation links when you use Tab Strip
You have a tab strip control in which you inserted two tabs
each tab contains transparent container which intern contains ViewContainerUIElement, so your Outline looks like this
TabStrip[TabStrip - Child]
--Tab[Tab - Child]
Tab_Content[TransparentContainer - Child]
viewContainerUIElement[ViewContainerUIElement - Child ]
Tab_header
--Tab1[Tab - Child]
Tab1_Content[TransaparentContainer - Child]
viewContainerUIElement[ViewContainerUIElement - Child]
Tab1_header
So you have two ViewContainerUIElements in Two Tabs, you need not write any code to navigate if you select second tab second view is displayed and if you select first tab first view is displayed.
Regards
Abhimanyu L -
How to deploy and debug java web service in eclipes or using any other soft
Hai,
can any one tell me how to deploy and debug java web service in eclipes or using any other software.
i have used tomcat web server and jdk1.4.0 to develop web service.
we have used web service to interact with MS outlook .
bye
sudhakar.mHi Sudhakar,
If you are used to working with ant then you can very well use eclipse to deploy your web service.
You would usually have the ant script in the source root working directory. From eclipse if you select the build file from the navigator view and right click you will see a run ant option in the pop up menu.
Select that option and you would be able to see each targets with a checkbox select option. So define each target maybe one for wsdl2java conversion, one for compilation and one for deploying your web services. You can either make all of them run by having depends option on or you can run them individually as it takes your fancy.
I am not sure about debugging a web service yet.
Hope this helps
Aviroop
The truth is out there? Does anyone know the URL? -
I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!
A simple text page like this:
Heading
sub heading
text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
<h2>sub heading</h2>
<p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users. -
I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?
If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you! -
Two questions: 1) How do Skype and iChat compare for group video? Quality, reliability, cost, etc are important. 2) Is my MobileMe ID what I need to input in the window in making an iChat buddy? It only says AIM above the window, online tutorial differs, saying MobileMe, AIM, GoogleTalk (Jabber) all work. Thnx
Hi,
IChat uses better Video Compression than Skype does.
On a top flight Mac you can send a 640 X 480 pixel frame up to 30 frames a sec.
Skype can't match this.
iChat in Video is Peer to Peer. (you can actually Log out of the Buddy list)
Skype seems to borrow something from everyone's bandwidth to make connections.
What do you mean by Business account Tracking ?
iChat Adds (or can add) the First Name, Last Name of your Buddies and create an Address Book Entry
Whether you mark those cards connected with a company is up to you.
(I have heard of issues with earlier version of iChat and the Address Book that "saw" the Company Name as the part of the Name and linking several Screen Names to the one name
Audio on a Mac using Skype tend to be the same as the streaming needs are less.
However you have to rely on any PCs audio abilities from PCs which may not be to the same standard.
Mac to PCs in iChat and AIM can be difficult though. (It should work but it rarely as simple as Plug and go)
Skype may suit your needs better on ocassions.
9:11 PM Thursday; May 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
How to add additional disks on vmware OEL4 and use it for Oracle 10gR2?
I created a virtual machine on vmware workstation 6 and installed OEL4.
during first install I created 20 GB disk but now I want to add more disks.
from vmware documentation I tried to add more 8 gb disk to the virtual host.
under devices I see two lines;
Hard Disk (SCSI 0:0) 20.0 GB
Hard Disk (SCSI 0:2) 8.0 GB
but I must be missing some step since I can not see 20 + 8 gb at df;
[root@antuhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 13G 9.7G 2.3G 82% /
none 506M 0 506M 0% /dev/shm
/dev/sda2 4.9G 851M 3.8G 19% /homeThank you.Oh the check the answer from Re: How to add additional disks on vmware OEL4 and use it for Oracle 10gR2?
-
How to Download and Use HP iPrint for Android, iPhone, and iPod Touch
Greetings iPrint users!
The following documents contain instructions for downloading the iPrint Application and use the app to print photos.
Included on each page are step-by-step instructions with screen shots, as well as a video walkthrough.
iPhone and iPod Touch Users
How to Download and Use HP iPrint for iPhone and iPod Touch
Android Users
How to Download and Use HP iPrint for Android
Happy Printing
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"Hi nstav,
I'm sorry that you are having problems finding the app to print from your iPad to your Photosmart Premium C309a.
The app you are looking for is HP's ePrint Mobile app. You can find it in the Apple App Store or iTunes. I have included a link to a document about getting started with the app. I have also included an FAQ document for the app.
Getting Started with HP ePrint Mobile Apps
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01616126
HP ePrint Mobile App FAQs
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
how do i simulate a DAQ device
in MAX and use it for testing applications without hardware???
If my application requires inputs
from external hardware to proceed how can I simulate a DAQ device in LabVEIW?
i need to simulate several Digital inputs and Outputs to test the software. currently i dont have the hardware and DAQ device here.
please reply with your valuable suggestions.
many thanks in advance
RENN
Kudos always welcome for helpful posts
Solved!
Go to Solution.Hi,
There is no option to simulate traditional device.You need hardware for that so i would suggest to simulate a PXI device which has similar configuration to PCI-6014 and to do a small modification to your application.. -
SAP Query-for Reporting how to create and use it
Hi SAP Gurus,
i need your help. in my project, client is asking to create queries to generate reports, i am not familiar with queries, so would appreciate it if any one can guide me and tell me the procedure for writing and creating queries soon.
also if you have any study material on steps on How to write and create queries for PP module
thank you very muchHi
Please refer below document
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Also refer below
How to Create Infoset Query (SAP Query)
Steps on how to proceed to create a Query:
ADHOC QUERY
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR PM Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset Create enter name of Infoset - Data source -- > Table join by basis table give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button - go out
TC SQ03 - Select user group - eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness..
For executing a query which is already created
1. Go to SQ01 transaction
2. Go to Environment menu->query areas->std areas
3. Then choose the user group where the query is created
4. It will display all the queries created for the group.choose the query you want to executeand click execute.
5. will take to the initial screen
6. Enter the required parameters and execute
Regards
Ranga
Message was edited by:
Ranganathan Srinivasamurthy -
How to deploy and run EJB in eclipse without XDoclet
Hi Friends
I am new in j2ee.In my academic project i want to do some ejb programming.
For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
If u have saple code or useful link regarding this please send it as soon as possible.
Thanks in advance
How to deploy and run EJB in eclipse without XDocletHI Welcome to J2ee...
I am also new to this...But i ll share my ideas with you...
In EJB 3.0 No need of any Deployment Descriptors....
And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
XDoclet is not mandatory...
Gopal V -
How to Configure and Use Oracle's JMS Connector with Tibco EMS
Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'foundHi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents. -
How to deploy and test J2ME application on handset???
Hi all,
I write an application using j2mewkt toolkit and generated all jad and jars.It's working fine on test models but want to test it on handset.Can naybody tell me how to deploy and test it on Handset,what basics i required,kindly tell me step-by-step as i m novice in J2ME.
thanxSTEP-1
Create the package - In the J2ME Wireless Toolkit Menu Select "Project"-"Package"-"Create Package". It creates jar and jad file in the bin directory.
STEP-2
Converting this file from m/c to device : There are many tools to transfer your midlet suites to your device. for example MIDWay Tool
The MIDWay tool allows you to download MIDlet suites to your developer-enabled device via SERIAL CABLE. Please note this is a preview of the tool included in the upcoming Motorola SDK for J2ME v3.1. The MIDWay v2.6 preview only supports the following devices : V60i, V66i, T280i, T720, T720i, A830
For this tool to work properly your device must be enabled for development and the "Java
STEP : 3
Open the jad file from Midway Appplication in which it imports the jad file and export it to the device. This is done by jam (Java Application Manager) takes responsibilities for this function i.e., the jad file is installed to the device. After installing it u can test as same as in emulator. -
How to install and use a plug-in downloaded from the apple site?
how to install and use a plug-in downloaded from the apple site?
Emelie,
which plug-in do you want to install?
some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
For others you move the plug-in into to System Library or your User Library:
Your Hard disk > Library > Application Support >Aperture > Plug-Ins > Edit
or
Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
You can tell by the extension, what kind of plug-in it is.
E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
Regards
Léonie
P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
Finder > Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
To show the System Library:
Finder > Go > Go to Folder
then enter / Library
Maybe you are looking for
-
How can i get icloud to use the same id as my iphone
how do I change the the icloud id to the id on my iphone
-
Problems appending email pdfs to existing portfolios using Outlook plugin.
I'm trying to use the outlook pdfmaker plugin that comes with Acrobat X Pro to append Outlook 2010 emails to an existing portfolio. I'm getting this error: "PDFMaker cannot append to the selected Adobe PDF archive because it was not created in Outlo
-
Not showing replies on my devices
Ever since yesterday there has been a lag or not showing replies from other people. Even the ims I received while in a call are no longer showing. It says a contact is away when they are not. Just very annoying and frustrating that the replies do no
-
Same udf distribution to all user
hi, I have around 200 udf's in item master data which i arranged according to category in right side of item master(Table CUDC) like general,others,accessories etc for manger user.Now i creating new user is it possible that all the udf setting a
-
Program title in SE38 got deleted while activation
Hi, I am facing a strange issue. I have maintained program title in the attributes section of the executable report in SE38. This title some times got deleted by itself while activation. This happens only some times not all the time I activated the p