How to deploy and test J2ME application on handset???

Hi all,
I write an application using j2mewkt toolkit and generated all jad and jars.It's working fine on test models but want to test it on handset.Can naybody tell me how to deploy and test it on Handset,what basics i required,kindly tell me step-by-step as i m novice in J2ME.
thanx

STEP-1
Create the package - In the J2ME Wireless Toolkit Menu Select "Project"-"Package"-"Create Package". It creates jar and jad file in the bin directory.
STEP-2
Converting this file from m/c to device : There are many tools to transfer your midlet suites to your device. for example MIDWay Tool
The MIDWay tool allows you to download MIDlet suites to your developer-enabled device via SERIAL CABLE. Please note this is a preview of the tool included in the upcoming Motorola SDK for J2ME v3.1. The MIDWay v2.6 preview only supports the following devices : V60i, V66i, T280i, T720, T720i, A830
For this tool to work properly your device must be enabled for development and the "Java
STEP : 3
Open the jad file from Midway Appplication in which it imports the jad file and export it to the device. This is done by jam (Java Application Manager) takes responsibilities for this function i.e., the jad file is installed to the device. After installing it u can test as same as in emulator.

Similar Messages

  • How to deploy and remove one application from WebLogic server

    Dear Friend:
    Do you know anyway that I can deploy or remove an application using
    command line intead of administration console when the WebLogic
    server is running?
    Thanks in advance,
    Damon

    I think we have to clean ( already scheduled for next release) list of some of the
    supported API on various MBeans. However just FYI , there is an "void
    setURI(java.lang.String)" method in Component MBean that you could use.
    Viresh Garg
    Pamela Minthorn wrote:
    I am also trying to automate application deployment process. I have looked at
    the docs you suggested below and am wondering why the ComponentMBean has a getURI()
    but not a setURI().
    Here's a snippet from my config.xml that I want to automate:
    <Application
    Deployed="true"
    Name="TestApp1"
    Path="E:\WebApps\version1">
    <WebAppComponent
    Name="TestApp1"
    URI="TestApp"
    Targets="myserver"
    />
    </Application>
    I haven't figured out how to set the URI.
    Also, it looks like this should also be possible using weblogic.Admin. Is that
    true?
    Thanks,
    Pam
    Viresh Garg <[email protected]> wrote:
    You can write a JMX java client and create an Application Admin Mbean
    and then use the application MBean and component MBean interface to set
    the targets for components and deploy them . For more information look
    at the JAVAdoc for:
    weblogic.management.MBeanHome
    weblogic.management.configuration.ApplicationMBean
    weblogic.management.configuration.ComponentMBean
    Let me know if you have addional questions.
    Viresh Garg
    Principal Developer Relations Engineer
    BEA Systems
    Damon wrote:
    Dear Friend:
    Do you know anyway that I can deploy or remove an application using
    command line intead of administration console when the WebLogic
    server is running?
    Thanks in advance,
    Damon
    [att1.html]

  • How to create, deploy and test JSP program in Netweaver developer studio?

    Hi Experts,
       I am trying to integrate a JSP program with SAP function module (RFC) via XI using Java proxy. I am using Netweaver Developer studio for Java programming.
      Can somebody send me the steps or user guide on how to create, deploy and test JSP program in Netweaver developer studio?
      I will be greatful to you.
    Please help!
    Thanks
    Gopal

    Hi Gopal,
    Which version of NetWeaver are you using?
    Here the links for --
    SAP NetWeaver CE 7.1
    [Developing JSP Pages|http://help.sap.com/saphelp_nwce10/helpdata/en/f7/f7bc3d8af79633e10000000a11405a/frameset.htm]
    [Deploying Applications|http://help.sap.com/saphelp_nwce10/helpdata/en/3c/52413e7bcd561ee10000000a114084/frameset.htm]
    NetWeaver 7.0 (2004s) and 2004
    [Developing JSP Pages|http://help.sap.com/saphelp_nw70/helpdata/en/f7/f7bc3d8af79633e10000000a11405a/frameset.htm]
    [Deploying EARs|http://help.sap.com/saphelp_nw70/helpdata/en/f0/122abf61d4974eaea6b5d9c314cff1/frameset.htm]
    Testing is very straightforward - just access the web application by its alias,
    e.g. http://<host>:<post>/<context-root>/myJSP.jsp
    HTH!
    \-- Vladimir

  • How to deploy and debug Central Office 13.0.1 Application in Oracle AS

    Hi,
    Can anybody please explain me how to deploy and debug Central Office 13.0.1 / 13.1.1 Application in Oracle Application Server via Ecllipse IDE.
    Please explain this:
    1. Run the Oracle Application Server in debug mode from Ecllipse IDE.
    2. Deploy the Central Office 13.0.1 into Application Server from Ecllipse IDE and able to debug the code.
    3. Restart the Oracle Application Server in debug mode from Ecllipse IDE.
    Thanks
    SRR

    I got the solution

  • How to deploy and configure custom JAAS login module

    Dear Experts,
    I have created a custom jaas login module, In my .jar I am having
    1. MyLoginModule.class
    2. Handler.class
    3. MyPrincipal.class
    I want to know how to deploy the custom jaas module to oc4j. And make available to all
    other application to use the same for authentication & authorization. Please suggest me.
    Thanks,
    Rajesh A

    This article does not mention that you can put the <jazn-loginconfig> tag into the orion-application.xml as well.
    Much easier to deploy and test.
    --olaf                                                                                                                                                                                                                                                                                                                       

  • How to Create and Test a Zone of Type F1-APP-URL

    Hi,
    I would like to how to create and test a Zone of Type F1-APP-URL?
    What all is required to setup an ADF application based URL in F1-APP-URL, what to configure and what are the basics or definite steps required to have a Zone of Type F1-APP-URL up and running in the application? Any Sample ADF components to be created?
    Please kindly let me know. Any test or dummy URL existing already which is based on ADF?

    Refer to Doc. Id 1515146.1 on the support site. Although for the moment it refers to a MWM example and may not be much of a help but it'd give a basic idea as to how it should be done.

  • How to deploy CE7.1.1 applications in EP7.0.

    Hi All,
    how to deploy CE7.1.1 applications in EP7.0.,is it possible to deploy or not.
    any one help me
    regards,
    jasmine

    Hi Jasmine,
       It's not possible deploy a Java EE aplication developed in SAP CE 7.1 into EP 7.0 because the XML descriptors have differents formats. Try to use the export options over your applications and maybe you will found some options to help you.
    Best Regards
    Ivá

  • Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise

    Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise

    Moving this discussion to the Enterprise Deployment for Creative Cloud, Creative Suite forum.

  • How to deploy and run  EJB in eclipse without XDoclet

    Hi Friends
    I am new in j2ee.In my academic project i want to do some ejb programming.
    For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
    I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
    If u have saple code or useful link regarding this please send it as soon as possible.
    Thanks in advance
    How to deploy and run EJB in eclipse without XDoclet

    HI Welcome to J2ee...
    I am also new to this...But i ll share my ideas with you...
    In EJB 3.0 No need of any Deployment Descriptors....
    And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
    XDoclet is not mandatory...
    Gopal V

  • Crawl issue - warning: "This URL is part of a host header SharePoint deployment and the search application is not configured to crawl individual host header sites. This will be crawled as a part of ....a start address"

    Hello all,
    I have a multi-tenant environment in SharePoint 2010 server. Different tenants are hosted by one web app.
    One content source has been created to crawl the all shared environment. (the only URL added in the content source settings = URL of the
     web app)
    Crawl everything under the hostname for each start address has been selected when creating this content source.
    Now I have created a new tenant hosted by the same web app. For this new tenant I want to have a different crawl schedule. Simple , I just create a new content source and add the host URL of this tenant. With the same settings has the other content source.
    After having started a full crawl I get 0 success and 1 warning : “This URL is part of a host header SharePoint deployment and the search application is not configured to crawl
    individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.”
    The first content source is well crawling the new tenant freshly created. Could you tell me where I’m wrong?
    Thanks in advance
    Regards
    Baldo

    Baldo,
    In the configuration that you described you now have 2 content sources set to crawl the same content. If you have a content source with a start address of http://servername/ then it is going to crawl everything past that address. If you are now changing
    the crawl schedule based on the individual site collections, you will need to move your start addresses further down the URL.
    For Example:
    1st Content Source:
    http://servername/ as a start address would now become
    http://servername/site1
    http://servername/site2
    2nd Content Source:
    http://servername/site3
    Also remember that all crawling must happen on the default zone. If you are trying to crawl a zone that the web application has been extended into, that will not work.
    ScottC - Microsoft SharePoint Support

  • How to design and implement an application that reads a string from the ...

    How to design and implement an application that reads a string from the user and prints it one character per line???

    This is so trivial that it barely deserves the words "design" or "application".
    You can use java.util.Scanner to get user input from the command line.
    You can use String.getChars to convert a String into an array of characters.
    You can use a loop to get all the characters individually.
    You can use System.out.println to print data on its own line.
    Good luck on your homework.

  • While Deploying and running the application

    Dear all,
    While deploying and running the application, after importing the relevant files into my local amchine workspace from another machine, i am facinf exception/error message as below:
    'Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found'.
    Would someone suggest for the same.
    With Regards,
    Lux.

    Hi,
    This is the message i am receving during runtime
    Web Dynpro client:
    HTML Client
    Web Dynpro client capabilities:
    User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
    Web Dynpro runtime:
    Vendor: SAP, Build ID: 6.4013.00.0000.20050607163945.0000 (release=630_SP_REL, buildtime=2005-06-07:21:12:54[UTC], changelist=351986, host=PWDFM067)
    Web Dynpro code generators of DC local/SurveysOverview:
    SapDictionaryGenerationCore: 6.4013.00.0000.20050606171348.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:02:28[UTC], changelist=351717, host=PWDFM026.wdf.sap.corp)
    SapMetamodelWebDynpro: 6.4013.00.0000.20050609113138.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:05:41[UTC], changelist=352442, host=PWDFM026.wdf.sap.corp)
    SapMetamodelCore: 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:56:40[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
    SapWebDynproGenerationTemplates: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:21:22[UTC], changelist=356134, host=PWDFM026)
    SapWebDynproGenerationCTemplates: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:21:22[UTC], changelist=356134, host=PWDFM026)
    SapGenerationFrameworkCore: 6.4013.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:55:55[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
    SapIdeWebDynproCheckLayer: 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:09:17[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
    SapMetamodelDictionary: 6.4013.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:59:56[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
    SapMetamodelCommon: 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:56:48[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
    SapWebDynproGenerationCore: 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:09:46[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
    SapDictionaryGenerationTemplates: (unknown)
    Web Dynpro code generators of DC sap.com/tcwddispwda:
    No information available
    Web Dynpro code generators of DC sap.com/tcwdcorecomp:
    No information available
    J2EE Engine:
    No information available
    Java VM:
    Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
    Operating system:
    Windows XP, version: 5.1, architecture: x86
    Error stacktrace:
    java.lang.NullPointerException
         at com.sap.survey.NewSurveyView.onActionCreateSurvey(NewSurveyView.java:180)
         at com.sap.survey.wdp.InternalNewSurveyView.wdInvokeEventHandler(InternalNewSurveyView.java:198)

  • How to deploy and debug java web service in eclipes or using any other soft

    Hai,
    can any one tell me how to deploy and debug java web service in eclipes or using any other software.
    i have used tomcat web server and jdk1.4.0 to develop web service.
    we have used web service to interact with MS outlook .
    bye
    sudhakar.m

    Hi Sudhakar,
    If you are used to working with ant then you can very well use eclipse to deploy your web service.
    You would usually have the ant script in the source root working directory. From eclipse if you select the build file from the navigator view and right click you will see a run ant option in the pop up menu.
    Select that option and you would be able to see each targets with a checkbox select option. So define each target maybe one for wsdl2java conversion, one for compilation and one for deploying your web services. You can either make all of them run by having depends option on or you can run them individually as it takes your fancy.
    I am not sure about debugging a web service yet.
    Hope this helps
    Aviroop
    The truth is out there? Does anyone know the URL?

  • How to start and stop Oracle Application Server from ANT

    How to start and stop Oracle Application Server and Web application from ANT
    Thanks in Advance.
    Mani

    Hi,
    You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
    ./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
    For instance, in my case I use:
    unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
    You have to run it on the machine where the managed server was installed.
    Best regards,
    Raúl

  • How to deploy and run application in user created OC4J instance

    Hello friends,
    I have created my own OC4J instance in Application Server Control.Now,how can I deploy and run application in this newly created OC4J instance.I need your help,it's
    urgent.
    Regards
    Prasenjit

    Hi Andreas,
    Thanx for your prompt reply.Yes,I had deployed the '.ear'in that.But I am not able to run the program in
    browser.Could you please elaborate more precisely.I wouuld be obliged.
    Regards
    Prasenjit

Maybe you are looking for

  • Elements Organizer does not install when reinstalling PSE10

    I have a problem that I cannot seem to resolve. Previously Adobe Photoshop Elements 10 had been running flawlessly on my computer and was easily opened by clicking the desktop icon which had a "C:\Program Files (x86)\Adobe\Elements 10 Organizer\Photo

  • Touch screen froze on 3 consecutive palm pre's within about a 5 month span

    My wife has a palm pre through sprint nextel. The first one lasted 4 days and screen froze up.  Sprint tech personnel at store could not fix phone or determine cause of the frozen screen. The sprint retail store replaced the phone. We took this phone

  • How can I copy my bookmarks without using Firefox Sync?

    I am just not comfortable putting my personal data onto an online server, which is what I'm doing with Firefox Sync. Is there a way to copy my bookmarks onto a flash drive, like we used to be able to do?

  • How many discs should I have for OX 10.3.7?

    How many install discs come with OX 10.3.7? I'm wondering if I am missing one because I can't seem to find Safari on my disc and I need to reinstall it. I only have 2 discs Mac OS X Install Disc 1 and Apple Hardware Test AND 2. Mac OX 9 install disc.

  • Cancellation of 122 for Sub contracting PO

    Dear Sir/mam Child item send to vendor through 541and when Parent material is received we do migo 101 for Parent Material and stock is posted to quality,if accpeted it is in unrestricted but if rejected we post to return delivery and mvt type 122.Can