Same udf distribution to all user

hi,
I have around 200 udf's in item master data which i arranged according to category in right side of item master(Table CUDC) like general,others,accessories etc for manger user.Now i creating new user is it possible that all the udf setting automatically copied to new user, doing manually will take long time as i have around 60 user's.I tried copy form setting from user master. Please advice me.
thanks
Rahul

Hi Rahul,
try coping form settings from one user to another using stored procedure mentioned in below thread:
Form Settings
Thanks,
Neetu

Similar Messages

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

ME2N Same variant availble for all users

Hello, its my first post,
Please, somebody knows how can i avail one same variant for all users at Tcode ME2N?
Thanx a lot for your contribute,
Jean Baena

Hello,
Please see information in note 383464
     You can deactivate the 'field-by-field' SPA/GPA attribute by using
     selection variants. Create a new variant for this. When you save this
     variant, you can control the SPA/GPA attribute in the field attributes.
     If a user chooses this variant, then the system also only uses the
     values that are stored in the variant.
     To use a variant already when starting the transaction, create a new
     transaction and start the list display report (for example, RM06EN00)
     using a user-defined variant.
     From Release 4.6B the variant used last is saved as inital variant. If
     you execute the transaction with a selection variant, then the system
     stores this variant for the specific user and for the specific
     transaction. If you execute the respective transaction again, the system
     automatically chooses the selection variant which you used the last time
     again (see Note 326221).
     For the document overview, you have the option to use customer
     enhancement MEQUERY1 to execute own standard variants (see Note 377180).
Regards,

How to send email distribution to all users from report ?

Hi all,
I got the following report output :-
Item_______Qty_On_hand_________Min_qty____Email
[email protected]
[email protected]
[email protected]
Once the reporis being generated, it will distirbute to all the email id list. Will this possible ? or any other better way to handle this ?
Thanks.
Rgds
Lim

hello,
you need to use 9i or 10g for that. there you would set the "repeat on" property of you report to the group your report is based on. this will create one instance of your report for each person.
then you need to use advanced distribution, create a distribution XML file that defines your desired email distribution with dynamic TO value.
for further info about advanced distribution, consult the publisching reports manual.
thanks,
ph.

ADE suddenly quit working for all users on my Vista computer. What should I do?

Please help.
Adobe Digital Editions quit working for all users on my Wndows Vista computer after I tried several times to install a book that wouldn't install. The book is one of three I recently purchased even though the other two installed with no problem. Other books were already installed.
I uninstalled and re-installed ADE with the latest version and tried again after clearing out the "My Digital Editions" folders by moving the contents elsewhere. The same problem occurs with all users on my computer.
The program runs showing no books or bookshelves despite contents in the "My Digital Editions" folder. If I try to "Add to Library," the program shuts down and shows nothing- not even an error message when re-run. Even though I'm only able to create a bookshelf, no bookshelf appers when the program is re-run.
I even tried de-authorizing and re-authorizing my computer.
What should I do?

HI
Whilst your Apple ID (presumably the @mac.com) may have been the original and been linked to @me.com at the MobileMe period and then to iCloud (@icloud.com) you need to keep to the same Apple ID through out (the iMessages server seems to treat them as different IDs to some extent).
In the Finder use the Go Menu > Go to Folder and enter ~/Library/Preferences
Find and Drag to the Trash com.apple.ids.service.com.apple.madrid.plist
On the iPhone remove those emails that are not the Apple ID in use.
On Restarting the Mac version you will have to re-enter the Apple ID.
If you then restart again you should get the pop ups to say what the iPhone is using (linking the iPhone number to the Apple ID)
Once you enable Text Forwarding on the iPhone then the Mac Version should generate and show you the Code to then enter in the iPhone's dialogue box to pair the devices.
If each Contact is turning red as you try to Send and reporting that the Contact is "Not Registered with iMessages" then you have a different issue.
This is caused by a partial login to the iMessages server and it seems it is one of those that only contacting Apple Support and saying you have an Account issue with the iMessages server from your Mac can it get sorted. (make sure you say it is an Account issue)
Of course it is the iPhone that is actually sending the SMS messages so it does need to have Carrier service at this point.
8:56 pm Monday; October 27, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Problem with "Group By" in Views - Not Displaying the Same for All Users

We have an Announcements List with its only View being set up to group by a metadata category field. We've done this many times on other kinds of lists and never had a problem. But with this list, about half the users can see only the ungrouped
set of announcements, whereas others actually see the items within their groups.
Those with "View" rights only can't see the grouped items - but that appears to be a coincidence as I promoted them to the same rights as others who can see them correctly, and that did NOT solve the problem. Everyone is using the exact same browser.
Note: the users who do NOT see the groupings see only a single category entry that displays only the name of the category list (but not the names of the actual categories within the category list). All the announcements are grouped under that one
entry for those users. This display looks exactly like it would if the categories had been left blank when the original announcements were created. But the categories are NOT blank, and the rest of the users can see them just fine, and the announcements display
within their appropriate groups.
I can't find anything in the View, the List Settings, or the User Permissions to explain this. What could be causing it, and how can I fix it?

Browser settings are controlled by central IT and are all identical.
The only difference I can detect is the second set of users (that don't see the category options) have only Read rights, whereas those with Contribute (or above) rights can see the categories. It doesn't make
sense that permissions would affect this, but I can't come up with any other differences.
Microsoft will not allow me to upload images. it says I can't upload images until they have verified my account, but there is no clue as to how, if or when that might happen. If you can tell me how to fix that, I can provide samples.

How can I configure FireFox security setting globally for all users on a PC? Is there something I can do in group policies or throught the registry to insure all users have the same settings?

Our Bank's core processor has rewritten their product to run in a web browser. Their browser of choice is Firefox 3.6. The specifications from our core processor specify specific security and settings parameters that must be adhered to by all users for their product to run properly. Is there a way to globally configure these settings via the registry or group policies to insure everyone who logs in to a given workstation opens Firefox with the same settings? Thank you for any assistance you can provide - Steve Gish, First Bank Kansas.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You can try:
*http://kb.mozillazine.org/Locking_preferences

How to make all users have the same working environment?

Hi guys,
thanks for helping out on this issue.
Is there a way to set all users on your system to have the same working environment? I believe, as root you can edit the /etc/profile. But when I looked at the file, I was confused. I had no idea where to add stuff because it was a script.
Please if anyone can help me explain how to customize system wide working environments, I will be very grateful .
Thank you
Arrey

Hi.
It's not clear what you understand under system wide working environments ?
/etc/profile it's one possible solution.
Another way - put custimozed .profile to all users and use customezed */etc/skel* for new users.
Regards.

2 iphones 1 computer. updated my wifes phone to ios 5 her phone got wiped of all apps and all my contacts are on her phone. we had been using the same apple id but different user accounts on our laptop. How do i get her phone back to normal?

2 iphone 4, 1 computer. i upgraded to ios 5 and just updated my wifes phone as well. her phone got wiped of all apps and all my contacts were put on her phone. we had been using the same apple id but different user acct on our laptop. How do i get her phone back to normal??

Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

PL/SQL web service--all users share the same database session

Hi, Is anyone else running into this? If I set a package variable in a pl/sql package through the web service from one client and then connect with another client, I can see the value of the package variable set by the first client. So it appears that instead of being 'stateless', as the documentation claims, that all users are actually connecting to the very same session--and sharing the same memory and variable values.
When I test my application by myself, I don't run into any problems. But the application I'm working on allows over 1000 students to select dorm rooms concurrently. The timing for that large a group is fine enough that I do have more than one person executing the same section of code simultaneously. This is a serious problem! I'm going to try using pragma serially reuseable on my packages to see if that will take care of it.
Has anyone else run into this problem? What do you do about it? Is this an issue with the web service? Or the application server?

Hello!
I have a question. You seem to be getting somewhere. In the reference (in your post) there is no mention of web.xml Is it a generated file or a file created by you? I am getting IOException error when generating EAR file. What could be wrong? Please help
TAI
habeeb

All users share the same iCal

I want all the users on my iMac to share the same Calendar. How do I do it?

Here's how to share iCal calendars among multiple users on a single Mac.
What you need to do is to move the iCal folder to a shared folder that is accessible to all users and then replace the iCal folder in each user's library folder with a "symbolic link' to the shared iCal folder. The symbolic link looks like an "alias", but if you try this using "aliases" to the shared iCal folder it will not work (trust me). You can create symbolic links using the Terminal, but I have no idea how, and the idea of using the Terminal scares me. The easiest way that I know of to create a symbolic link is with a shareware application called Cocktail. It allows you to do a number of different things including System Maintenance, Network Optimization, etc. It took me a while to remember how to do this; I originally found the information in the Discussions when iCal was first released, but apparently none of those original postings are listed in the forums anymore.
Here's how to do it (you must have Administrator privileges):
First locate your iCal folder (your user name > Library > Application Support > iCal) and make a copy of it (Finder > File > Duplicate). Drag the copy to your Desktop until you're sure iCal is being shared between users.
Next move the original iCal folder into a Shared folder in the Users folder (Hard Disk > Users > Shared > iCal). To make sure all users can access the information, select the Shared folder, choose File > Get Info, click the little Lock icon, then under "Ownership & Permissions -> Details" make sure that the "Owner" is "System", "Group" is "Wheel" and "Access" for Owner, Group and Others is "Read & Write". Do the same with the iCal folder within the Shared folder, but this time, under "Ownership & Permissions -> Details" make sure that the "Owner" is "your user name", "Group" is "Staff" and "Access" for Owner, Group and Others is "Read & Write" and click the "Apply to Enclosed Items" button. I basing this information on what the Ownership & Permissions are for each of the folders in my system.
Open Cocktail (I'm using version 3.6.5). Once the app is open (you must enter an administrator's user name and password) click on the "Files" button, then click on the "Links" button. Where it says "Create Symbolic Link" click on the "Choose" button. Navigate to the iCal folder (Hard Disk > Users > Shared > iCal) and click "Choose" again. In the "Save As" box that appears enter "iCal", then navigate to the Application Support folder in your Home folder (your user name > Library > Application Support) and click "Save". Quit Cocktail and open iCal. You should see all of your calendars as you did before.
Log in under each additional User, move that User's iCal folder (user name > Library > Application Support > iCal) onto the Desktop, then create another Symbolic Link to replace it, using Cocktail as described above. In each case you should see the same calendar information as when you were logged in under your user name. As a test, add a New Event or To Do in iCal under one user, log out and back in under another user and you should see the changes when you open iCal.
Once everything appears to be working, you can delete the iCal folders from each User's Desktop.
As an additional maintenance measure, use Disk Utility to repair Disk Permissions.
Unfortunately, if each User has his/her own calendars in iCal they will not be in the shared calendars. Only the calendars in the first iCal folder used to set up the shared folder will be available and I don't know of any way to merge or combine the other user's calendars into one.
Hope this helps and good luck!

Audio output device same for all users Yosemite

I use more then one account on my recent Macbook Pro. For the first account I like to have the audio output set to the speakers but for the other account I want the audio output set to the headphones.
With Mavericks the Macbook remembered the last audio settings for each user account.
With Yosemite any changes to the audio settings (input, output,system sound, etc.) on one account affects the audio setting on other the user account.
I tried various audio settings to see if it affected them all. It seems to.
I tried seeing if it happened only when the users accounts were logged in or it was different on boot etc. It seems to always change the settings for all users no matter what.
I tried resetting the PRAM but that did not solve it.
I tried a 3rd party program called AudiSwitcher from the App store to see if this could help but no luck.
I searched here and more widely to see if anyone else was reporting this and found one other person who seemed to mention the same problem and they concluded "I did some tests and came to the conclusion that the system now does not remember settings for each user, and applies the current setting of audio output for all accounts."
Curious to know:
     a) Does this affect other people? If not, I'll look for conflicting apps on my computer.
     b) Is this intended behavior or should I look for a way to report it as a bug?
     c) And most importantly if there is a way around it?
Thanks!

I'm also have the same problem. I tested it on fresh Yosemite installation without any additional software. Your mentioned my conclusion about tests.

Does all user accounts load the same drivers, plugins etc?

Hi
Most of what I do on my Mac can be divided into "Music" and "Office-stuff".
1. I want to create two user accounts so my system loads faster and is more stable because it only loads what it needs for the specific task. (And to avoid conflicts with drivers, plugins, settings etc. for the audio software with the drivers etc. for the officephotoshop+wirelessmenu bar stuff.) My question is: will creating two users help me? Or will both user accounts still load all the same stuff in the background?
2. And how do I even install programs that only run on one user? It seems that all my programs are available for all users. And moving them around after installation as someone suggested to me sounds a little unsafe.
I wish for the two user accounts to share Firefox and bookmarks and I can't do that if I create disk partitions, right?
Thanks a lot guys. I hope you have some thoughts on this.
Jakob

From your description and configuration you posted of having a single iMac TM backs up all of the accounts.

Sharing itunes library with all users on the same computer

I am trying to share the itunes library with 4 users on the same computer. Please tell me how.

I've been trying to find a way to do this easily as well. It would be good if you could set iTunes to use the "All User" documents folder instead of the My Documents folder for the storing the main library and just use the My Documents Folder for individual playlists.
Follow the instructions in the link provided by Mimico Kid.
** It is not important that the shared folder is C:\Documents and Settings\All Users\Documents\My Music. It can be any shared folder on the PC. On mine it's H:\iTunes as I don't have the space on the C: drive.
When you've done that make sure that your Adminstrator account's copy of iTunes shows the Library, Playlists and Album art as you want the all the users to see them.
Then copy all of the remaining files from the Administrator Accounts iTunes folder into every other users iTunes folder.
** C:\Documents and Settings\USERNAME\Documents\My Music\iTunes
If any user adds songs or modifies playlists the administrator will need to log on and copy the files from that users iTunes folder to everyone elses.
This might be a slightly cumbersome way around the problem but it works for me. It has the disadvantage or advantage whichever way you look at it that every User will see an identical view with identical playlists.

Same udf distribution to all user

Similar Messages

Maybe you are looking for