How to deploy Photoshop/Premiere Elements 13 with SCCM 2012 r2?

Hi there
I want to create a .msi package of Photoshop/Premiere Elements 13 for SCCM 2012 r2. Can me anyone give a tutorial or a tip?
thx

If you want to deploy lync by SCCM, you may utilize config.xml to do that. All the things you want to configure, you may find it can be achieved in config.xml
Run the install by using the following command line:
<path>\setup.exe /config <path>\config.xml
http://technet.microsoft.com/en-us/library/jj204651.aspx
How to deploy application by SCCM.
http://technet.microsoft.com/en-us/library/gg682082.aspx
Juke Chou
TechNet Community Support

Similar Messages

Deploying CC Enterprise Applications With SCCM 2012

Hi all,
We are using CC Packager to package up individual applications (Photoshop, InDesign etc) and are having trouble deploying the applications once packaged. To deploy, we are using SCCM 2012 and are deploying to Windows 7 x64 clients. It appears that the install begins on the client, then hangs, never to finish.
We are running the MSI with the REBOOT=ReallySuppress and MSIRESTARTMANAGERCONTROL=Disable commands, but with no luck.
This has us really stumped. The applications seem to package fine, yet just won't install. If we manually run the installer, we can see it begin installing, then the progress bar goes backwards and the installation ends without displaying any sort of message.
Also, as an FYI, we have followed this guide closely in our attempts: http://helpx.adobe.com/creative-cloud/packager/deploying-packages-sccm.html
Has anyone experienced a similar problem? Any ideas?
Thank you in advance.
Ryan

Windows 7 x64 Clients
Deploying with SCCM 2012
I have called Adobe before and was told that the application package needs to be on a local drive on the computer. The package cannot be installed if the package is sitting on the network. My installation for a adobe creative cloud package fails to install when I try to install the application from the software center. At some moment the installation searches to ensure it is on a local disk. Not sure how this happends. If you place the installation package on a drive on your computer the package will install, although it will take time depending on how many applications you have packaged.
Another problem that you might have is having users log out of the applications without admin previlages.
I have yet to find a solution for these two problems, I could really use some help from someone who has sucessfully deployed a creative cloud package to a user.
Thank you

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

I bought the pkg. of Photoshop & Premiere Elements 10 in 2012. I now want to update to Premiere Elements 13 without updating Photoshop. Can I do this? Will you please tell me the steps I need to take?

I purchased Photoshop and Premiere Elements 10 as a package in 2012. I now want to update the Premiere to the 13 edition, without updating Photoshop. Can I do this? Will you please tell me the steps I need to take?

Just buy version Premiere Elements 13.
Even if you don't get the "upgrade" price, you can probably find it for about that cost on sites like Amazon.com.
You can keep Photo Elements 13 if you'd like. The only downside is that Premiere Elements 13 and Photo Elements 10 won't share the same Organizer catalog. Otherwise, they'll get along just fine.

How to deploy Cisco ISE agents through SCCM 2012 R2

Hi,
We are deploying Cisco ISE in our setup. we need to deploy following 3 .msi & 1 .xml files to 3000 PCs through System Center 2012 R2 Configuration Manager.
The configuration.xml file must be deployed in specified (%ProgramData%\Cisco\Cisco AnyConnect Secure Mobility Client\NetworkAccessManager\newConfigFiles) location.
anyconnect-nam-win-4.0.02052-k9.msi
anyconnect-win-4.0.02052-pre-deploy-k9.msi
nacagentsetup-win-4.9.0.42.msi
configuration.xml
The above 3 .msi files should be installed silently and configuration.xml file to be copied to said location.
I want to create one package to deploy 3.msi files at once and another package for .xml file.
or
Is there anyway to create in one package to install the .msi files first and copy the .xml file as well.
Any idea please.
Regards,Ali

Hi,
Have you tried to create a script.
You can easily test this by running your script manually with psexec -s
to emulate running as SYSTEM account.
Reference:
Robocopy
https://technet.microsoft.com/en-us/library/cc733145.aspx
Windows Installer : MSIEXEC Silent Install End to END
http://sccm2o12.blogspot.com/2010/04/windows-installer-msiexec-silent.html
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Trying to get a redownload of Photoshop Premiere Elements 11 which I purchased and then lost with a hard drive. Give me a clue how to get a download!!

Need download of Photoshop Premiere Elements 11. Have serial number all I need is a place to go to let me give them it and downlaod

succi
If you purchased from Adobe direct, then just go to Adobe web site http://www.adobe.com and sign in. In the Search field at the top of the Adobe home page, type in My Orders. Then follow the link to My Orders and find your order and the download files associated with it.
If there are problems in that regard, go to the following web site and download and install the free tryouts for Photoshop Elements 11 and Premiere Elements 11 (whichever one you want) and insert your purchased serial number into those installation files to make it your working copy.
Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
The key to success to read and care out to the word the "Note: Very Important Instructions" on the web page, starting with when to click the "here" otherwise you will get an Access Denied.
Please let us know if that worked for you.
Thank you.
ATR

How do i download my adobe photoshop & premiere elements 7 onto laptop that doesnt have disc drive?

so basically years ago my family bought me the duo pack of adobe photoshop & premiere elements 7 for christmas.
i downloaded it onto the family computer back in the day.
i finally got my own laptop.
but of course it doesnt have a disc drive.
i still have everything adobe, including the discs and serial numbers.
how can i download my favourite thing in the whole entire world onto my laptop?????

you could use a computer with a disk drive to copy the installation files to a usb stick and transfer the usb stick to your new computer.
or if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml/comment-page-1#comment-2174
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13 AND Photoshop Premiere Elements 13? What would be the price?

How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13 AND Photoshop Premiere Elements 13? What would be the price?

Hi Raymond,
I would advise you to buy the bundle package of Premiere and Photoshop Elements 13 which cost 149 $ but due to online promotions the price right now is 119 $.
Thank you for posting on Adobe Forums.

How do I get a .CPI file into Photoshop Premiere Elements 12? Camera is a Cannon Vixia HF 20

How do I get footage from Cannon Vixia HF 20 into Photoshop Premiere Elements 12?

How do I get footage from Cannon Vixia HF 20 into Photoshop Premiere Elements 12?

How can I download Premiere Elements 11 on my new computer, since my previous computer broke down?

This summer I bought and downloaded Premiere Elements 11 to my previous computer, which a few months later broke down.
How can I download Premiere Elements 11 to my new computer?
In my Adobe account, I see the product listed with the serial number - but the specific download is "not applicable"...

Klavs Hansen
Did you download and purchase the original installation files from Adobe? Did your old computer have a Windows operating system? Does your new computer have a Windows operating system?
I suggest that you contact Adobe via its Adobe Chat
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=downloading-installing -and-setting-up
When the link opens, click on "I still need help." to bring up the Adobe Chat.
Alternatively, you could download the files from the following and then insert your purchased serial number.
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
Read the instructions carefully. In such a try, I am assuming that both old and new computers involve the Windows.
ATR

Re-installation Photoshop & Premiere Elements

I have to re-install Photoshop & Premiere Elements, but people tell me I shouldn't de-activate the program because it might not let me re-install it on the same computer. They have had issues with other programs.
How do I do it?

You do not need to deactivate if you are reinstalling on the same machine.

I lost all my Adobe programs Master Collection 4 & 5 plus Photoshop/Premiere Elements

I have lost all my registered Adobe programs including Photoshop/Premiere Elements and The Master Collection 4 bundle plus and upgrade of Master Collection 5. Can some one explain to me how I can get a copy of all of them?, I try Adobe but I can’t get a telephone number to contact costume service.
A will enormously appreciate any information to the regard.

ProDesign keeps back downloads of CS4 and CS5 as well as Photoshop/Premier Elements.
http://prodesigntools.com/tag/ddl
You must follow the instructions carefully in order for the downloads to work.
When you do download and install you will need the serial numbers for your software.
Hopefully you registered your purchases with Adobe, because your serial numbers are stored under your account.
If you have not, then you have to find them in the packages you bought your Adobe software in.

Unable to Install Photoshop & Premiere Elements 13 on MAC 10.9.5

Hello. I received Photoshop & Premiere Elements 13 for Christmas. It was purchased from Amazon (Amazon inc., not a third-party vendor). I have a MAC, running OS 10.9.5, which aligns with system requirements. I have been unable to install the software at all. One time I received a message that the software was not legitimately Adobe software. Otherwise, the disc is ejected automatically. Everything indicates it is Adobe software (serial number, packaging, etc.) Any ideas? Thank you, Melissa
Correcting Title

Thanks. I downloaded Elements, and started to install, but can't get past the serial number screen.
There are several numbers on the back of the DVD box. I assumed the serial number was the long number above the bar code on the right - < removed > - but that doesn't fill the spaces and I don't get the 'NEXT' button.
The instructions say that the serial number will start with 1057 - so I tried added that to the beginning of the number above. Didn't work.
There is also a PN number on the back of the box, and a shorter number under a bar code on the left - < removed >
Can you tell me what I need to enter to install?
I haven't downloaded Premiere yet...
Thanks,
Melissa

How to deploy Photoshop/Premiere Elements 13 with SCCM 2012 r2?

Similar Messages

Maybe you are looking for