How to desighn a table for below logic

Hi all,
Could any body help me , how to design a table for below requirements
Ticketing Status
Departure Date/Time
Domestic Point of Sale
International Point of Sale
Yes
Outside of 24 hours
Immediate
Immediate
Yes
Inside of 24 hours
Immediate
Immediate
No
Outside of 24 hours
24 hours after Project review or 20 hours prior to departure, whichever is earlier
72 hours after Projectreview or 20 hours prior to departure, whichever is earlier
No
Inside of 24 hours
4 hours after Projectreview or 4 hours before departure, whichever is earlier; Immediate if within 4 hours
4 hours after Projectreview or 4 hours before departure, whichever is earlier; Immediate if within 4 hours

CREATE TABLE [dbo].[POS_Table](
[POSID] [int] IDENTITY(1,1) NOT NULL,
[Ticketing Status] [varchar](3) NULL,
[Departure Type] [varchar](7) NULL,
[Departure DateTime Hr] [int] NULL,
[POSType] [varchar](15) NULL,
[POSAfterProject Review Hr] [int] NULL,
[PriorToDeparture Hr] [int] NULL,
[Immediate Hr] [int] NULL,
CONSTRAINT [PK_POS_Table] PRIMARY KEY CLUSTERED
[POSID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
The rows will look like as below,
POSID
Ticketing Status
Departure Type
Departure DateTime Hr
POSType
POSAfterProject Review Hr
PriorToDeparture Hr
Immediate Hr
1
Yes
Outside
24
Domestic
0
0
0
2
Yes
Inside
24
Domestic
0
0
0
3
Yes
Outside
24
International
0
0
0
4
Yes
Inside
24
International
0
0
0
5
No
Outside
24
Domestic
24
20
0
6
No
Outside
24
International
72
20
0
7
No
Inside
24
Domestic
4
4
4
8
No
Inside
24
International
4
4
4
Regards, RSingh

Similar Messages

How to check with table for cursor..?

How to check with table for cursor..?
Here I have Table temp_final_plan
Here i want to update if already exit...below is the procedure....
CREATE OR REPLACE PROCEDURE spu_final_profit_plan
AS
-- Constant declarations
ln_errnum number := 0;
-- Variable declarations
   ls_errmsg app_errors.err_msg%TYPE;
   ls_appmsg app_errors.app_msg%TYPE;
   ls_appid app_errors.app_id%TYPE;
-- Cursor declaration for final_update_el
CURSOR cur_final_update_el IS
    select '910' ent,
           '9127316' center,
           post_acct,
           sum(avg_mtd_01) sum_avg_mtd_01,
           sum(avg_mtd_02) sum_avg_mtd_02,
           sum(avg_ytd_01) sum_avg_ytd_01,
           sum(avg_ytd_02) sum_avg_ytd_02
      from mon_act_cypy
     where rec_type = 'A'
       and sum_flag = 'D'
       and yr = '2008'
       and substr(ctr_or_hier, 1, 2) = 'el'
       and ent || sub_ent in
           (select ent || sub_ent
              from ent_ref
             where roll_ent || roll_sub_ent = '999100')
     group by post_acct
    having sum(avg_mtd_01) <> 0
        or sum(avg_mtd_02) <> 0
        or sum(avg_ytd_01) <> 0
        or sum(avg_ytd_02) <> 0;
-- Cursor declaration for final_update
CURSOR cur_final_update IS
    select b.plan_ent b_plan_ent,
           b.plan_ctr b_plan_ctr,
           a.post_acct a_post_acct,
           sum(a.avg_mtd_01) sum_avg_mtd_01,
           sum(a.avg_mtd_02) sum_avg_mtd_02,
           sum(a.avg_ytd_01) sum_ytd_mtd_01,
           sum(a.avg_ytd_02) sum_ytd_mtd_02
      from mon_act_cypy a,
           plan_unit_tbl b
     where a.ent || a.ctr_or_hier = b.ent || b.ctr_or_hier
       and a.rec_type = 'A'
       and a.sum_flag = 'D'
       and a.yr = '2008'
       and b.hier_tbl_num = '001'
       and a.ent || a.sub_ent in
           (select ent || sub_ent
              from ent_ref
             where roll_ent || roll_sub_ent = '999100')
     group by b.plan_ent, b.plan_ctr, a.post_acct
    having sum(a.avg_mtd_01) <> 0
        or sum(a.avg_mtd_02) <> 0
        or sum(a.avg_ytd_01) <> 0
        or sum(a.avg_ytd_02) <> 0;
-- Begin the procedure body
   BEGIN
-- Insert / Update final profit plan for final_update query using cursor
   FOR rec_final_update_el IN cur_final_update_el
   LOOP
   EXIT WHEN rec_final_update_el%NOTFOUND;
   IF rec_final_update_el. THEN
      UPDATE temp_final_plan
         SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
             sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,
             sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,
             sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,
       WHERE ent = rec_final_update_el.ent
         AND center = rec_final_update_el.center
         AND post_acct = rec_final_update_el.post_acct;
   ELSE
      INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
                                         rec_final_update_el.center,
                                         rec_final_update_el.post_acct,
                                         rec_final_update_el.sum_avg_mtd_01,
                                         rec_final_update_el.sum_avg_mtd_02,
                                         rec_final_update_el.sum_avg_ytd_01,
                                         rec_final_update_el.sum_avg_ytd_02);
   END IF;
   END LOOP;
-- Insert / Update final profit plan for final_update query using cursor
   FOR rec_final_update IN cur_final_update
   LOOP
   EXIT WHEN rec_final_update%NOTFOUND;
   IF rec_final_update. THEN
      UPDATE temp_final_plan
         SET sum_avg_mtd_01 = rec_final_update.sum_avg_mtd_01,
             sum_avg_mtd_02 = rec_final_update.sum_avg_mtd_02,
             sum_avg_ytd_01 = rec_final_update.sum_avg_ytd_01,
             sum_avg_ytd_02 = rec_final_update.sum_avg_ytd_02,
       WHERE ent = rec_final_update.b_plan_ent
         AND center = rec_final_update.b_plan_ctr
         AND post_acct = rec_final_update.a_post_acct;
   ELSE
      INSERT INTO temp_final_plan VALUES(rec_final_update.b_plan_ent,
                                         rec_final_update.b_plan_ctr,
                                         rec_final_update.a_post_acct,
                                         rec_final_update.sum_avg_mtd_01,
                                         rec_final_update.sum_avg_mtd_02,
                                         rec_final_update.sum_avg_ytd_01,
                                         rec_final_update.sum_avg_ytd_02);
   END IF;
   END LOOP;
-- EXCEPTION handling section
   EXCEPTION
-- Fire OTHERS Exception case by default
   WHEN OTHERS THEN
-- ROLL BACK Transaction, if any failure
   ROLLBACK;
   ln_errnum := SQLCODE;
   ls_errmsg := SUBSTR(SQLERRM, 1, 100);
-- Log the ERRORS into APP_ERRORS table using SPU_LOG_ERRORS procedure
   spu_log_errors(ln_errnum, ls_errmsg, ls_appid, ls_appmsg);
-- End of the stored procedure
END spu_final_profit_plan;
[\pre]

I'm not sure what you mean by, 'How to check with table for cursor..?' but I'll offer a comment on your Code Snippet. I think you want to know how to check if a record exists so you know if you need to perform an INSERT or an UPDATE.
Here is a snippet of your code. I'll put my comments in "Comment" style in your code.
-- Insert / Update final profit plan for final_update query using cursor
   FOR rec_final_update_el IN cur_final_update_el
   LOOP
/* There is no need to test for %NOTFOUND since you are using Cursor FOR Loop!
** This construct automatically exits when the last record is processed. */
   EXIT WHEN rec_final_update_el%NOTFOUND;
/* Is this where you would like to know how to Check if the record already exist??
** I asked this because, 'rec_final_update_el.' is not valid syntax. Are you looking for
** an Cursor Attribute or Method you can check here?
** I would suggest a Primary Key or Unique Index on ENT, CENTER, and POST_ACCT
** on the TEMP_FINAL_PLAN table. Then simply perform an INSERT and code an
** Exception to UPDATE when you get a DUP_VAL_ON_INDEX exception. Otherwise,
** you will need to simply run an Implicit or Explicit Cursor to test if the row exists and
** use this return value to determine if you should INSERT or UPDATE. */
   IF rec_final_update_el. THEN
      UPDATE temp_final_plan
         SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
             sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,
             sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,
             sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,
       WHERE ent = rec_final_update_el.ent
         AND center = rec_final_update_el.center
         AND post_acct = rec_final_update_el.post_acct;
   ELSE
      INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
                                         rec_final_update_el.center,
                                         rec_final_update_el.post_acct,
                                         rec_final_update_el.sum_avg_mtd_01,
                                         rec_final_update_el.sum_avg_mtd_02,
                                         rec_final_update_el.sum_avg_ytd_01,
                                         rec_final_update_el.sum_avg_ytd_02);
   END IF;
   END LOOP;I hope I've answered your question, but if I haven't please provide more details so we can better understand your request.
Craig...

How to create internal table for a structure in BSP

hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
                 include type zuvendstr.
                 data:end of itab_1.
                 data wa_str like line of itab_1.
                 loop at itab_1 into wa_str. %>
                <tr>
                 <td><%=wa_str-name%> </td>
                       <%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPS

Hi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy

CLIENTThe maintenance tables for the logical files; may we use any client

Please see this link http://help.sap.com/saphelp_47x200/helpdata/en/9f/db95e635c111d1829f0000e829fbfe/content.htm
See the import parameter
CLIENT The maintenance tables for the logical files and paths are client-dependent. Therefore, the desired client can be imported. The current client is stored in the system field SY-MANDT.
Does it mean that we may use any client even if our client number is different?

I put it back once more

How to know the tables for a datasource like 2lis_17_order

Hi,
How to know the tables for a data source like 2lis_17_order, i have checked in Extract structure of that data source, only fields are visible but how will i know that these fields are getting extracted from so and so tables?
pls respond. thanks in advance

Hi,
Go to RSO2 at source system, Enter data source and click on display.
if its table based then you can see table name there it self.
if its view based then notedown the view name and go to SE11, provide view and click on display. see joined table names there.
Thanks

How's this partition table for my server?

How's this partition table for my server? Web/DNS/DHCP/Mail Server.
hdd1: ~8gb total
/boot - 100mb
swap - 1gb
/ - rest of drive
hdd2: ~155gb total
/var - whole drive
This is a Compaq ProLiant 5500 server with 10 drives. Will most things be installed inside /var or what?

Zetsumei wrote:Web/DNS/DHCP/Mail Server.
Web = /srv
DNS = /var
DHCP = /var
Mail = Depends which package you use. I use postfix and told it to use /srv
I would half your swap, reduce /var and put the extra space into /srv
Also create a separate /tmp and /home to prevent accidental or deliberate DoS attacks by filling your / partition
Here's what I use on my Web / DNS / FTP server:
Filesystem Size Used Avail Use% Mounted on
/dev/xvda 493M 176M 317M 36% /
/dev/xvdc 31M 674K 29M 3% /boot
/dev/lvmData-home 62M 26M 34M 44% /home
/dev/lvmData-usr 2.0G 848M 1.1G 45% /usr
/dev/lvmData-tmp 496M 20M 451M 5% /tmp
/dev/lvmData-srv 1.5G 769M 667M 54% /srv
/dev/lvmData-var 496M 231M 241M 49% /var
/dev/lvmData-pacman 384M 303M 82M 79% /var/cache/pacman
/dev/lvmData-backup 5.5G 4.6G 565M 90% /mnt/backup

How to find an table for storing the employee salary

hi,
how to find an table for storing employee salary .. In which table those details are stored .. Please reply me.
regards,
kumar

Hi,
You can see the basic salary details from table -pa0008.If you can see the payroll data,then its not stored in transparent table.its in cluster.For viewing that,you can see through transaction code - pc_payresult.
Regards,
Manoj.

How to find Related Tables for the Tcode given.

How to find Related Tables for the Tcode given. (master data)
Thanks in advance.

Hi Sridhar,
Welcome to SDN.
The tables for a given transaction can be seen in the transaction SE80.
First goto SE93.
Give ur Tcode and find the program name.
Now goto SE80. select program in the first dropdown and give the program name in the second box. U can find the list of tables used.
One more way is : use ST05.
and One more is using FM 'get_tables'
Thanks,
Shailaja
Edited by: Shailaja on Jul 11, 2008 12:33 PM

How to Fill Setup tables for MAP (IS- Retail)

Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
Naresh

Hi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL --- MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208 these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh

How to set BDCDATA table for a SELECT-OPTIONS object?

Dear experts,
I have a transaction with PARAMETERS and SELECT-OPTIONS objects. This transaction will be called by another program by using CALL TRANSACTION 'mytransaction' USING mybdcdata statement. Below is some of the called transaction's source code:
DATA:
date TYPE sflight-fldate.
PARAMETERS:
p_carid TYPE sflight-carrid,
p_conid TYPE sflight-connid.
SELECT-OPTIONS:
so_date FOR date.
This is what I wrote in the calling program to define the values of the called transaction PARAMETERS fields:
DATA:
wa_bdcdata TYPE bdcdata,
it_bdcdata TYPE TABLE OF bdcdata.
wa_bdcdata-program = 'MYPROGRAM'.
wa_bdcdata-dynpro = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'P_CARID'.
wa_bdcdata-fval = 'AA'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'P_CONID'.
wa_bdcdata-fval = '017'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'MYTRANSACTION' USING it_bdcdata.
Unfortunately, I don't know how to set the values for the SELECT-OPTIONS screen fields. How to do this?
I've Googled this and tried several guesses but none was found or successful. Thanks in advance.
Regards,
Haris

Hi ,
Better go for SUBMIT report   instead of CALL transaction ...
find the name of report being called on that transaction which you will be calling . Use that report name in SUBMIT
Just take help from below code .
Before using do please read by pressing f1 on SUBMIT syntax .
data:seltab     type table of rsparams,
         seltab_wa like line of seltab.
    move: 'LANGU' to seltab_wa-selname,
          'S'      to seltab_wa-kind,
          'I'      to seltab_wa-sign,
          'BT'     to seltab_wa-option,
          'D'      to seltab_wa-low,
          'I'      to seltab_wa-high.
    append seltab_wa to seltab.
    clear seltab_wa.
    move: 'E'      to seltab_wa-sign,
          'EQ'     to seltab_wa-option,
          'F'      to seltab_wa-low,
          space    to seltab_wa-high.
    append seltab_wa to seltab.
    clear seltab_wa.
    move: 'AUFNR' to seltab_wa-selname,
          p_aufnr to seltab_wa-low.
    append seltab_wa to seltab.
    clear seltab_wa.
    submit rkaep000 using selection-set 'VARIANT1'
                      with aufnr = p_aufnr
                      with selection-table seltab
                      exporting list to memory
                      and return .
regards
Deepak.

How to write sql query for below mentioned eaxmple.

Hi,
I have requirement.
There are number of rows and I need the result through query as follows.Please help me to proved sql query for below mentioned requirement.
example: table TEST.
COLA COLB COLC COLD COLE COLF MANAGER 5 NULL NULL 3 NULL
SR.MANAGER 6 3 NULL NULL NULL
VP 5 5 4 5 5
I have to write the sql query if COLA IS MANAGER THEN CONSIDER MANGER RECORD,AND IF ANY COLUMN FILED IS NULL FOR MANGER THEN CONSIDER COLA IS SR.MANGER, AND IF ANY COLUMN FILED IS NULL FOR SR,MANGER THEN CONSIDER VP records.
I need output as below.
COLB COLC COLD COLE COLF
5(manager) 3(sr.manger) 4(vp) 3(manger) 3(vp)
Please provide the for above mentioned output.
Thanks

Duplicate thread. please view the answer posted in your first thread.
how to write sql query.
And, please don't post any duplicate thread.
Regards.
Satyaki De.

A question about the multiple source table for the logical table

Hi All,
I am to test, having two physical sources for an logical table, but it is failing as it is always getting data from only one table rather than two tables.
!http://picasaweb.google.com/KSivaUS/OracleForumQuestions#5433761212378087346!
Any suggestion or inputs would be appreciated.
Thanks
Siva

your 2 measure columns are in the same unique - low level??
your connections look good.
which is the result if you bring only the sales column at your report??is it the sum of the 2 datasources??
try to repass again all your bussiness model.or make an other one.
fisrt pass your fact with 2 sources and then your dimensions....
as i can see you have customer_dim,do both of your columns have the appropriate key to this dimension??try to make a physical connection from both fact sources to this dimension as well as for time...
if you do it in this way ,there is no possibility not to work
hope i helped...
http://greekoraclebi.blogspot.com/

How can create color table for "write bmp file.vi"?

i want to create a color table for a 8 bit bitmap.The color table is the input of "write bmp file.vi". how can i make it?
thanks!

> i want to create a color table for a 8 bit bitmap.The color table is
> the input of "write bmp file.vi". how can i make it?
> thanks!
>
There is a color control on the front panel numerics palette. A color
in LV is a four byte xRGB formatted number. So you can make an array of
the color numerics and set them by hand or format the numbers however
you like. If unwired it will use the LV color palette which is pretty
much the HTML palette.
Greg McKaskle

How maintaining the connection table for sticky/persistent/non-persistent?

Question about how to maintain the connection table for the source(client) and destination(server) in the CSM(or CSS).
I know the sticky has the table and max size such as 128K(css11501)as per CCO but not clear how works the persistant and non-persistant case.
Q1) persistant. does it maintain the conntion table to tracking the session? then, any information the table size?
Q2) non-persistant. is this also have connection table? then, how it works?
why I'm asking is want to understand how the session keep tracking. for example, the router based on the routing table(stateless) versus PIX firewall has stateful table. As analogue, is the non-persistnet stateless and statefull for the persistent and sticky?
Thnaks in advance,

The CSS uses FCB to maintain information about active connections.
Each connections requires 2 FCB - one for client to vip and one for server to client.
When you boot the CSS it will immediately reserver a good amount of memory to create a list of FCB.
Each connection will then take 2 FCB from the list.
You can do a 'flow stat' from llama mode to verify how much free/used FCB you have.
When running low on FCB, the CSS will try to allocate more memory.
Gilles.

How to create PLD_Items table for Crystal Reports

Hi experts,
Im trying to use the variable 130 for a report but in crystal reports, in some SAP Standard Reports the table PLD_Items appears, my question is how to create this structure for my report, i know that is an ADO.NET connection based on an XML file, but i dont know from where i can take this value can any one help me please?
Best Regards
Dave

If this is CR for B1, please post to SAP Business One Application
Alternatively see the SCN Site Index for the correct SCN Space for your product / component.
- Ludek
SCN Moderator

How to desighn a table for below logic

Similar Messages

Maybe you are looking for