How to detect concurrent updates from MS Access database

Hi...
I would like to know how can LV detect the MS Access database if there is any updates data from others application such as VB6 through the same database.. I do not want the LV to check from the database so oftenly. It will only do the checking / refreshing of data when there is a new data updated by other software (like VB) into the same database. THANKS!!......

222,
It sounds like you want MS Access to send an event or callback to your Labview program whenever it receives an update. I'm definitely no Access expert, and I'm not sure if the program can generate events like that (I've done some searches at Microsoft.com, with no luck so far). I would suggest going to Microsoft's website to either contact technical support with the question, or post to their forums. The first step would be figuring out if it's possible to generate such an event, and if so, we can go from there. If not, the polling method might be the only option. Here are some links that will help get you started:
Microsoft Access Home
Microsoft Office Access 2003 Help and Support
-Justin

Similar Messages

How can I remove updates from my I-pad

How can I remove updates from my I pad

What updates ?
If you mean from the Updates tab in the App Store app then you can't - any updates that you've downloaded will disappear off that last in 30 days. If you don't want to install an app update then as far as I know they can't be removed from the Updates tab.
If you want to got back to a previous version of an app then do you have a copy of that previous version anywhere ? If you do then you can delete the app from your iPad (which will also delete its content) and sync back the previous version.
If you mean an iOS update that you've installed then you can't, downgrading the iOS version isn't supported by Apple.

How to stop adobe updater from wanting to update

hi i have adobe reader and it keeps poping up i don't need updates for it what i have is fine to open my pdf files can anyone help with how to disable the updater from ever poping up in my tray

If you are on a Mac I have a solution for you. If you have a Mac you don't need Acrobat, it's just slow extra weight trash. But sometime uninstalling can leave behind updater crap thats no better than a virus, shame on you Adobe.
Launch Terminal.app (you can use spotlight and type terminal)
Type: sudo nano /etc/hosts
Enter your OSX password when promoted
add a line in this file: 127.0.0.1 armmf.adobe.com
press <control + x> and save the file
What's this do?
Adobe some how has some weekly background installer that contacts the URL armmf.adobe.com and downloads update software and then prompts you to install it or cancel, never a "don't remind me" option. So this just simply blocks any request from your computer to this one URL. If the updater can't call home then it can't bother you with a useless update it couldn't find. Simple.
The hidden updater will still run and try to call home from time to time and I think someday Adobe should be sued with anti trust violations, but thats another day.

Dynamic Drop Down Menu from an Access Database

Hello Everyone,
I am user Adobe Designer 7 to create a fillable PDF, and I would like to get the options for a drop down menu from my MS Access database. Basically I would like to populate the drop down menu with the names in the Access database. There i Have a table called PhoneNumbers and it contains the names of all the people I want to appear in the drop down menu that I just created.
This is what I did:
I created a drop down menu and then I clicked on Object > Binding > under "Default Binding (Open, Save, Submit)" choose "New Data Connection"
then connect to the database using a fileDSN. I opened the table where with the "names" column (PhoneNumbers)
and under the "Query," option, I wrote:
select * from PhoneNumbers
Then it gave me all the fields from the table and I dragged the "Last name" field over the drop down menu. I will need to find a way to get the "First Name" field to join the Last Name field to create one name that looks like this: Hill, Angie
The problem is that even though it shows the name from the Access database, it does not give me a list of all the names when I open the form in Reader 7...
No matter how much I click that drop down arrow, the name does not change...
It's almost as if it gets to the databse and gets the data from the database, but it cannot loop through it...
It's almost as if it's missing the code to loop through it...
Why is this? Any ideas how to fix it so it gives me a list of ALL the names, when I click on the drop down button?
After that, how can I add the first name to it?
The form would look like this:
Angie H. 202 641 2055
Right now it does look like that, but I cannot change to another name when I click the drop down menu. For the code to be working when I change to another name, the phone number also changes to the phone number of that person:
Barry S. 703 555 1258
The name is in a drop down menu, the phone number is in a textbox.
Can you help me with this?

ANGELA, Well, the good new is that you are not far off...What you need is to insert the following code using Java Script under the Initialize function. Just replace the Connection name, The Hidden Value, and the Display Text with your information. This is a function is 8.0 but will work with 7.0 /* This dropdown list object will populate two columns with data from a data connection. sDataConnectionName - name of the data connection to get the data from. Note the data connection will appear in the Data View. sColHiddenValue - this is the hidden value column of the dropdown. Specify the table column name used for populating. sColDisplayText - this is the display text column of the dropdown. Specify the table column name used for populating. These variables must be assigned for this script to run correctly. Replace <value> with the correct value. */ var sDataConnectionName = "DataConnection"; // example - var sDataConnectionName = "MyDataConnection"; var sColHiddenValue = "CAT_Corp_SeqNo"; // example - var sColHiddenValue = "MyIndexValue"; var sColDisplayText = "CAT_Corporate"; // example - var sColDisplayText = "MyDescription" // Search for sourceSet node which matchs the DataConnection name var nIndex = 0; while(xfa.sourceSet.nodes.item(nIndex).name != sDataConnectionName) { nIndex++; } var oDB = xfa.sourceSet.nodes.item(nIndex); oDB.open(); oDB.first(); // Search node with the class name "command" var nDBIndex = 0; while(oDB.nodes.item(nDBIndex).className != "command") { nDBIndex++; } // Backup the original settings before assigning BOF and EOF to stay var sBOFBackup = oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("bofAction"); var sEOFBackup = oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("eofAction"); oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayBOF", "bofAction"); oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayEOF", "eofAction"); // Clear the list this.clearItems(); // Search for the record node with the matching Data Connection name nIndex = 0; while(xfa.record.nodes.item(nIndex).name != sDataConnectionName) { nIndex++; } var oRecord = xfa.record.nodes.item(nIndex); // Find the value node var oValueNode = null; var oTextNode = null; for(var nColIndex = 0; nColIndex < oRecord.nodes.length; nColIndex++) { if(oRecord.nodes.item(nColIndex).name == sColHiddenValue) { oValueNode = oRecord.nodes.item(nColIndex); } else if(oRecord.nodes.item(nColIndex).name == sColDisplayText) { oTextNode = oRecord.nodes.item(nColIndex); } } while(!oDB.isEOF()) { this.addItem(oTextNode.value, oValueNode.value); oDB.next(); } // Restore the original settings oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sBOFBackup, "bofAction"); oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sEOFBackup, "eofAction"); // Close connection oDB.close();

Data type structure while picking data from MS Access database

Dear All,
I have to start on new interface in which data from MS Access database will be updated in the z-table in SAP. Is there any blog available which gives step by step process for MS Access-XI-RFC interface. Or please guide me on what should be the structure of the Data Type for picking the data from the MS Access database.
Regards,
NJ

Hi Nishu,
Sender side the structure is as follows
db_sen_dt
..... emp_row
.......... f1
.......... f2
Structure is complex then check this blog
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC to RFC Scenario, but it is synchronous
SYNCHRONOUS SOAP TO JDBC - END TO END WALKTHROUGH
Also check this link
Regards
Ramesh

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

Help needed with populating a drop-down list from an Access Database

Topic
data drop-down list
Jason Murthy - 11:39am Feb 14, 2005 Pacific
Hello,
I am trying to use the data drop-down list from the custom library. I enter the name of my data connection and the other 2 variables in quotes when they are initialized, just like the example says to, but it still doesn't work. Anyone have any thoughts?
Thanks,
Jason
Reply To This Discussion | Back to Topic List | Bookmark | Change Subscription
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages 11 messages. Displaying 10 through 11.
First Previous Next Last Show All Messages
Denzil White - 5:46am Jul 28, 05 PST (#10 of 11)
Oh and before you say anything more I have also tried changing it from Javascript to the FormCalc, and no diff, maybe I am more stupid than I realised, heh,heh
Post Reply | Bookmark
Henk Pisuisse - 12:06am Aug 9, 05 PST (#11 of 11)
I am having trouble (sleepless nights) with populating a drop-down list from an Access Database. The result is: I only get the first record from the data connection. So the connection works but I cannot go through the other records. Maybe there is an other way to do this.
I am trying to selectively fill a form with data from an MS-access database.
I hope someone can help me.
[email protected]
The Netherlands (small country in Europe)

If you email the access DB and the form to [email protected], I will try to take a look at it for you.

Oracle select data from ms access database

please dear sirs,
exactly what i need is when i make select statment from oracle sql, i can select data from ms access database
please help me
thanks in advance
Yasser
Edited by: user4490340 on 27-Oct-2010 01:09

You will need to use ODBC. Pl post details of OS and database versions.
http://download.oracle.com/docs/cd/E11882_01/gateways.112/e12070/intro.htm
HTH
Srini

Anyone knows about using java to get data from MS Access database.

hi there
anyone knows about using java to get data from MS Access database? thank you

there is a list of jdbc drivers at:
http://industry.java.sun.com/products/jdbc/drivers
they have several ms access drivers listed.
also, you can use a jdbc-odbc bridge which allows you to use jdbc to connect to any odbc data source:
http://java.sun.com/j2se/1.3/docs/guide/jdbc/getstart/bridge.doc.html

Retrieve data from MS Access database.

Hi all,
The following is part of my coding. Once I have clicked the jButton1, the jTextField1 will get the input of user and store into a variable named "bbb". After that the variable will be passed to a function as a parameter to retrieve data from MS Access database using the ResultSet method. Next, the ResultSet will be splited into many part and just the student ic will be displayed.
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        String bbb = jTextField1.getText(); //get input from user and store into a variable named bbb
        ResultSet codes = getCodes(bbb); //Retrieve data from database
        Code c = getCode (codes); //split the retireved date to many part
         jLabel2.setText(c.ic); //display the student ic only
   private static ResultSet getCodes(String bbb)
        Connection con = getConnection();
        try
        Statement s = con.createStatement();
        String select = "SELECT [Student-File].* " + "FROM [Student-File] WHERE (([Student-File].[student-code])=bbb); " ;
        ResultSet rows;
        rows = s.executeQuery(select);
        return rows;
        catch (SQLException e)
            System.out.println(e.getMessage());
        return null;
private static Code getCode (ResultSet codes)
        try
            String name = codes.getString("student-name");
            String scode = codes.getString("student-code");
            String ic = codes.getString ("student-ic");
            String add = codes.getString ("student-address");
            String phone = codes.getString ("student-phone");
          return new Code (name,scode,ic,add,phone);
        catch (SQLException e)
            System.out.println(e.getMessage());
        return null;
    private static class Code
        public String name ;
        public String scode ;
        public String ic ;
        public String add;
        public String phone;
        public Code (String name, String scode, String ic,String add,String phone)
            this.name = name;
            this.scode = scode;
            this.ic = ic;
            this.add = add;
            this.phone = phone;
}But after I have compiled the coding above, the following error existed.
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
at testing3.getCode(testing3.java:137)
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
at testing3.jButton1ActionPerformed(testing3.java:71)
at testing3.access$000(testing3.java:17)
at testing3$1.actionPerformed(testing3.java:45)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at testing3.getCode(testing3.java:137)
at testing3.jButton1ActionPerformed(testing3.java:71)
at testing3.access$000(testing3.java:17)
at testing3$1.actionPerformed(testing3.java:45)
My questions here are:
1) Will my idea above work?
2) Is it correct of my query statement that send to MS Access database?
Can anyone help me?
Thanks in advance,
ning.

you may try this:
String select = "SELECT * FROM your_table_name WHERE your_column_name = '" + bbb + "'";or another approach using PreparedStatement:
String select = "SELECT * FROM your_table_name WHERE your_column_name = ?";
PreparedStatement ps = con.prepareStatement(select);
ps.setString(1, "bbb");
ResultSet rs = ps.executeQuery();hth.

How to Get Current Date from MS Access in a Select Statement

From a java method, I want to use JDBC to get the current date from MS Access. In Oracle I would do "select sysdate from dual", but I can't figure out how to do it in MS Access. Here are some of my attempts. I have a table in my Access db called PARM.
//        String sql = "SELECT '0', NOW() FROM PARM";
//rs.next() is false
//        String sql = "SELECT NOW() AS CURR_DT FROM PARM";
//rs.next() is false
//        String sql = "SELECT DATE() AS CURR_DT FROM PARM";
//rs.next() is false
//        String sql = "SELECT NOW()";
//StringIndexOutOfBoundsException: String index out of range: -1
//        String sql = "select { fn now() } from parm";
        String sql = "SELECT Date()";
//java.lang.StringIndexOutOfBoundsException: String index out of range: -1
        ResultSet rs = stmt.executeQuery(sql);
        if (rs.next()) {
            return rs.getString(1);
        } else {
               return null;
          }

Why are you getting it as a String? You should be getting it as a timestamp.
Although getString works for me too. There is something else wrong that you haven't shown.
Here is some shoddy, but simple, test code that demonstrates it working.
import java.sql.*;
public class Test{
public static void main(String args[])throws Exception{
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection c = DriverManager.getConnection("jdbc:odbc:stats");
    Statement s = c.createStatement();
    ResultSet rs = s.executeQuery("SELECT NOW()");
    while(rs.next()){
      System.out.println(rs.getTimestamp(1));
    rs.close();
    s.close();
    c.close();
}

How do I install updates from another computer?

Got a macbook, and a windows.
How do I install updates for my macbook (software update.app updates) from my windows computer? Can i somehow download.. example, if i have snow leopard 10.6.1, can i then download an update on windows that updates my mac to 10.6.8?

Okay, cool. Is it always "Combo updater" or "Update Combined" that i should download?
I downloaded one of the 10.6.8 updates from apple.com, and it said that i needed 10.6.7 before i installed 10.6.8.
But I got paritioned HD's, one lion and one snow leopard, When lion 10.7.1 or 10.7.2 comes out, can I then download the updates on windows and transfer that update to mac and update just cool?
And how do i stay up-to-date with this?
And other software updates, such as fixes in the trackpad, and such random stuff (not itunes, mail, automator, etc updates, only Main OS updates..) How do i stay up to date with that?

ANSWER: HOW TO DETECT Java Plugin from JavaScript

I created a new topic because the questions about
how to detect Java Plugin in browsers are scattered
thoughout this forum.
Basically you need to employ two approaches for IE and NS.
In IE you need to try to instantiate a small applet
(not your production applet) in order to see if browser
can do it. if the browser can do it, you can make a
call applet from JavaScript in order to find version of
JRE (as well as a host of other things).
In NS you can write a simple JavaScript which will
interrogate the browser for all plugins installed. Then
ypu can make a desicion whether to pass execution to
the next(or generated) page which hosts your applet,
or ask the user to download/install a plugin.
I ecourage everybody to host a plugin on your site
rather leave default link to it which is generated by
html converter.
In order to run sample,
Prerequisites:
Java Plugin 1.3.
If you have a different version of plugin,
substitute hardcoded plugin version in JavaScript for
value that you have.
1. compile java file
2. put class file in the same directory with html file
3. load html file into the browser.
4. press "Check Java Plugin.." button
5. see it work
6. examine code
7. uninstall plugin
8. repeat steps 1 - 4
9. see it work
10. install plugin.
Sample code follows:
**********************HTML FILE BEGIN***********
<HTML>
<HEAD>

<TITLE>Detect Java Runtime</TITLE>
</HEAD>
<SCRIPT LANGUAGE="JavaScript">
var browsername;
function doNetscape()
for (i=0; i < navigator.plugins.length; i++)
for (j = 0; j < navigator.plugins.length; j++)
if(navigator.plugins[i][j].type == "application/x-java-applet;version=1.3")
alert("You are running Netscape with Java Plugin 1.3.0 - OK");
return;
alert("You are running Netscape\nPlease, install Java Runtime Environment 1.3.0");
function doMicrosoft()
var applet = document.myApplet;
if(applet == null)
alert("You are running Microsoft Browser.\nPlease, install Java Runtime Environment 1.3.0");
return;
var version = applet.getJavaVersion();
if(version == "1.3.0")
alert("You are running IE, Java Plugin 1.3.0 installed - OK");
else
alert("You are running IE, other plugin installed - mybe OK if later that 1.3.0\nYour version: " + version);
function getJava()
var applet = document.myApplet;
if(applet == null)
alert("Please, install Java Runtime Environment");
return;
 alert("JRE Version: " + document.myApplet.getJavaVersion());
function checkJavaPlugin()
 browsername = navigator.appName;
 if(browsername.indexOf("Netscape")!= -1)
 browsername="NS";
 doNetscape();
 else
 if(browsername.indexOf("Microsoft")!=-1)
 browsername="MSIE";
 doMicrosoft();
 else
 browsername="N/A";
 alert("Unknown browser: " + browsername);
</SCRIPT>
<body>
Check Java Plugin
<OBJECT id="myApplet" classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
 WIDTH = 1
 HEIGHT = 1 >
 <PARAM NAME = CODE VALUE = "DetectPluginApplet.class" >
 <PARAM NAME="scriptable" VALUE="true" >
 <embed type="application/x-java-applet;version=1.3"
 code = DetectPluginApplet width = 2 height = 2 MAYSCRIPT = "true" >
 </embed>
 </EMBED>
</object>
<FORM>
 <INPUT TYPE="button" value="Get Plugin Version in IE" onClick="getJava()">
 <INPUT TYPE="button" value="Check Java Plugin in NS and IE" onClick="javascript:checkJavaPlugin()">
</FORM>
</BODY>
</HTML>
**********************HTML FILE END***********
***************APPLET FILE BEGIN***********
import java.awt.*;
public class DetectPluginApplet extends java.applet.Applet
 public void init()
 add(new Label("DetectPluginApplet"));
public String getJavaVersion()
return System.getProperty("java.version");
**************APPLLET FILE END************

Try following java script, it works on new browsers (NS 4+, IE5+). For IE you have to enable 'ActiveX objects creation' in security options.
var agt=navigator.userAgent.toLowerCase();
var is_major = parseInt(navigator.appVersion);
var is_nav = ((agt.indexOf('mozilla')!=-1) && (agt.indexOf('spoofer')==-1)
&& (agt.indexOf('compatible') == -1) && (agt.indexOf('opera')==-1)
&& (agt.indexOf('webtv')==-1) && (agt.indexOf('hotjava')==-1));
var is_nav4up = (is_nav && (is_major >= 4));
var is_ie = ((agt.indexOf("msie") != -1) && (agt.indexOf("opera") == -1));
var is_ie5 = (is_ie && (is_major == 4) && (agt.indexOf("msie 5.0")!=-1) );
var is_ie5_5 = (is_ie && (is_major == 4) && (agt.indexOf("msie 5.5") !=-1));
var is_ie6 = (is_ie && (is_major == 4) && (agt.indexOf("msie 6.0") !=-1));
var is_ie5up = (is_ie && (is_major == 4)
&& ( (agt.indexOf("msie 5.0")!=-1)
|| (agt.indexOf("msie 5.5")!=-1)
|| (agt.indexOf("msie 6.0")!=-1) ) );
var pluginDetected = false;
var activeXDisabled = false;
// we can check for plugin existence only when browser is 'is_ie5up' or 'is_nav4up'
if(is_nav4up) {
// Refresh 'navigator.plugins' to get newly installed plugins.
// Use 'navigator.plugins.refresh(false)' to refresh plugins
// without refreshing open documents (browser windows)
if(navigator.plugins) {
navigator.plugins.refresh(false);
// check for Java plugin in installed plugins
if(navigator.mimeTypes) {
for (i=0; i < navigator.mimeTypes.length; i++) {
if( (navigator.mimeTypes[ i].type != null)
&& (navigator.mimeTypes[ i].type.indexOf(
"application/x-java-applet;jpi-version=1.3") != -1) ) {
pluginDetected = true;
break;
} else if (is_ie5up) {
var javaVersion;
var shell;
try {
// Create WSH(WindowsScriptHost) shell, available on Windows only
shell = new ActiveXObject("WScript.Shell");
if (shell != null) {
// Read JRE version from Window Registry
try {
javaVersion = shell.regRead("HKEY_LOCAL_MACHINE\\Software\\JavaSoft\\Java Runtime Environment\\CurrentVersion");
} catch(e) {
// handle exceptions raised by 'shell.regRead(...)' here
// so that the outer try-catch block would receive only
// exceptions raised by 'shell = new ActiveXObject(...)'
} catch(e) {
// Creating ActiveX controls thru script is disabled
// in InternetExplorer security options
// To enable it:
// a. Go to the 'Tools --> Internet Options' menu
// b. Select the 'Security' tab
// c. Select zone (Internet/Intranet)
// d. Click the 'Custom Level..' button which will display the
// 'Security Settings' window.
// e. Enable the option 'Initialize and script ActiveX controls
// not marked as safe'
activeXDisabled = true;
// Check whether we got required (1.3+) Java Plugin
if ( (javaVersion != null) && (javaVersion.indexOf("1.3") != -1) ) {
pluginDetected = true;
if (pluginDetected) {
// show applet page
} else if (confirm("Java Plugin 1.3+ not found, Do you want to download it?")) {
// show install page
} else {
// show error page
}

HT203426 how to delete an update from update panel?

I keep getting an error trying to upgrade an app. How do I delete it from the update list? Thanks in advance for any information

I found the answer...Sorry!

How to revoke a user from having access to a table

Hi,
what is the syntax to revoke a user from having access to a certain table ??
I want to revoke SELECT, UPDATE, INSERT, and DELETE ?
thanks,

Hi,
Try this:
revoke select, update, delete, insert on your_table from some_user;You can find more info at the docs:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9020.htm

How to detect concurrent updates from MS Access database

Similar Messages

Maybe you are looking for