How to detect the Collission for duplicated movieclps
Hey guys .. i am back with set of query..till now .. key
press movement a rocket (mc) is moving left right up down in a
defined stage area. and i am able to generate some fire balls
randomize falling from top. this is just i am duplicating the movie
clip(fireball_mc) .... now i want incase or when the rocket (mc)
touch the fire ball programm shold detect the collsion and generate
a score board. well for this i have tried a script for two movie
clips ... wchich is working but ..i don know or i m not gettng the
logic how to detect the collission for duplicated movie clips...
well i m just giving the script for oinly 2 movie clips
coliding...can any one tell me how to do it with randmize or
duplkicated mcs??
for 2 movie clip ...
_root.mc1.onEnterFrame = function() {
if(this.hitTest(_root.egg)) {
_root.result="Oh no..... we are dead";
} else {
_root.result="we are going fine";
(this is happening ..but let me know how can i get the same
result for ranndom mcs)
hope someone can help me out ...
i appriciate ur valuable time to read this..
thanking you
Hey thx for ur suggestion...but as i said m very much new to
actionscript (more designer) so i don have much idea... most of the
things i m doing for this game i m going through lots of references
then i tried to understand te codes m implmenting them to my
need..can u explain me little more about arrays u haves asked for
loops u asked me to use the hittest function..please /.. i will be
greatfull to u... thx
Similar Messages
-
How to detect the *Acrobat Browser Plug-in version* installed on a users system, on Firefox, Safari, Opera, etc?
Or one script for detecting Plug-in version for major browsers. Need full example code.Wrote an article on this with code samples (Javascript + HTML) - basically there are differences between IE and other browsers. Chrome natively comes with the Chrome PDF Viewer so I've incorporated that in my detection script.
The script detects the browser type, and the installed acrobat version...
Have a look here:
Detect the Adobe Reader Plugin -
How to increase the time for detect a device down on Prime 2.0
Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your helpGo to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager> -
How to detect the HTML extension window close in In-design? Does the In-design throws any event on opening/closing of extensions?
I have a HTML extension running in In-design CC 2014 version.
I want to perform some required set of actions before my extension window is closed(by clicking on the cross button on top right corner).
Does In-design throws any event for it? Or can we capture it using C++ plugin in some way?Naah.......haven't got any event for that yet.
Although, since HTML extensions are using chromium browser, as a workaround, u can attach listener to HTML onClose event, but it won't solve any purpose if you
are looking to logout session or do some business login in your code. -
How to detect the final loop iteration of a step in a PostStep Engine Callback?
I see the need to use a PostStep Engine Callback and look at the Step.Result container of the caller.
My issue: If the caller is configured to loop, the PostStep Engine CB executes with each iteration and I do not see how to detect the final iteration (which is the only iteration I am interested in).
Ideas are welcome. Thanks in advance,
GuenterGuenter,
well, the way i discripted IS the generic way. The reason for this is the following:
You can compare TestStand very well with procedural programming languages. So you have variables with different lifetimes and scope. RunState is one variable, which is available in every scope, but it may have different content.
So you leaving the execution of your clientsequence in order to call the callback, you leave the scope of the RunState from your clientsequence. But only there the information is stored on how many iterations are left. It does not make sense to pass this anywhere, since the execution of your clientsequence has to decide if to loop further or not.
But, please note that there are different scopes for the "disable result recording" as well. You have found the most global one, the station option. But you can as well set this in the sequence settings (Edit >> Sequence Properties >> Disable Result Recording for All Steps) and at step-level (Run Options >> Record Result {uncheck it}).
Looping on a single step using the step settings, you can additionally choose not to record results for each iteration. This will lead to only a single entry in the ResultList, the overall result of the looped step (if resultcollection is enabled of course!).
hope this helps,
Norbert
Message Edited by Norbert B on 08-22-2008 02:10 AM
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
How to detect the sign of a number?
I have output which gives either negative number or positive number. My problems is how to detect the sign of the number and output boolean value? For example if input number is negative like -23.11 I want to output false and if the number is positive like 17.99 I want to output true.
T H A N K S!
Solved!
Go to Solution.Message Edited by Phillip Brooks on 07-16-2009 11:08 AM
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness -
Does any body knows how to detect the resolution of an inserted image in word?
Does any body knows how to detect the resolution of an inserted image in word?
I'm not sure I understand your reply but when you insert images into Word that are larger than will fit on the page, they are automatically compressed. If you right click and select Size and Position you can restore it to 100% but you will not see all the image.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
In VB Programming code -- How to access the formula for suppressing a field
In VB Programming code -- How to access the formula for suppressing a field
I am using Crystal Reports 2008 v1
Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
My problem is that I am unable to access the formula used to dynamically suppress a field.
The following code is working:
mySections = rd.ReportDefinition.Sections
For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
iloop = 0
For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
myTextObject.Text = "new field text goes here"
mySection.SectionFormat.EnableSuppress = True
' Here is where I want to change the formula for the Suppression
End if
iloop = iloop + 1
Next
Next
I can not find any reference to the actual suppression formula in the SDK help file.
Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten. The results of the formula determine the suppression.
Is there a way to reference this formula. I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.Hello, Mark;
If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
Elaine -
How to obtain the license for the mentioned products.
Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
SivaThanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva. -
A^b = n ,How to get the value for a ?
a^b = n ===> n = Math.pow(a,b)
How to get the value for a ?
dose Java have API to get the value for a ?
Thanks for help~~~a^b = n
=>
a = n^(1/b)
So,
a = Math.pow(n,1.0/b) -
How to get the date for the first monday of each month
Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AMUse IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
select add_months(date '2013-1-1',level-1) dt
from dual
connect by level <= 12
select dt first_of_the_month,
trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY. -
I have the code to read from a file but my problem is how to prompt the user for the file name at run time.
import java.io.File;
import java.io.FileNotFoundException;
import java.util.InputMismatchException;
import java.util.Scanner;
public class FileRead {
public static void main(String args[]) {
Scanner scan = null;
File file = new File("Results.txt");
String number;
try {
scan = new Scanner(file);
while (scan.hasNext()){
number = scan.next();
System.out.println(number);}
catch (FileNotFoundException ex1){
System.out.println("No such file");
catch (IllegalStateException ex2){
System.out.println("Did you close the read by mistake");
catch (InputMismatchException ex){
System.out.println("File structure incorrect");
finally{
scan.close();}
}Any hints would be greatly appreciated. Thank you in advanceI have read through some of the tutorials that you have directed me too and they are very useful, thank you. however there are still a few things that i am not clear about. I am using net beans 5.0 I have placed a text file named Results.txt into the project at the root so the program can view it.
When I use the code that you provided me with, does it matter where the file is, or will it look through everywhere on the hard drive to find a match?
This code compiles but at run time it comes up with this error
run-single:
java.lang.NoClassDefFoundError: NamedFile
Exception in thread "main"
Java Result: 1
BUILD SUCCESSFUL (total time: 3 seconds)
import java.util.Scanner;
import java.io.*;
class NamedFileInput
public static void main (String[] args) throws IOException
int num, square;
// this Scanner is used to read what the user enters
Scanner user = new Scanner( System.in );
String fileName;
System.out.print("File Name: ");
fileName = user.nextLine().trim();
File file = new File( fileName ); // create a File object
// this Scanner is used to read from the file
Scanner scan = new Scanner( file );
while( scan.hasNextInt() ) // is there more data to process?
num = scan.nextInt();
square = num * num ;
System.out.println("The square of " + num + " is " + square);
}his is the code that i used. It is the same as the code you posted for me (on chapter 23 I/O using Scanner and PrintStream) Sorry im just really stuck on this!! -
How to restrict the GR for Production Order when Goods Issue is not done
Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva -
How to get the ItemKey for a Workflow triggered by an event in Oracle Apps
Hello,
I have added a custom sub process to the seeded "OM Order Header" workflow. The process sends a notification. There are a few attributes in the body of the message tied to this notification, to which I am trying to assign values to using the syntax:
SetItemAttrText (itemtype, itemkey, attrname, attrvalue).
I have the internal names for the item type and attribute name, but don't know how to get the value for the item key. I understand the item key is supposed to be unique for each item type and is automatically generated by the workflow engine when the work flow fires. Is there a built-in function or some means to get this value?
Regards,
SmitaHave you tried to query WF_ITEMS? -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_ITEMS&c_owner=APPLSYS&c_type=TABLE
bde_wf_item.sql - Runtime Data of a Single Workflow Item [ID 187071.1]
Thanks,
Hussein -
How to setup the RV120W for quickvpn
Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any helpUser Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/
Maybe you are looking for
-
How can I get an older iTunes U account enrolled in newer version of iTunes U?
My institution originally signed up for iTunes U in 2010, but due to various reasons, we never went live with our site. We are now ready to proceed, but we need to get enrolled in the newer version of iTunes U. I was directed to go to https://eduap
-
I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id
-
I am trying to setup a new site for DW8. Looks easy enough but I keep getting this one error message. Dreamweaver cannot use the prefix you entered to display live data. (error 12029) this is the data that I have entered to setup the site on the basi
-
Hi, we have a cache instance on Azure and we are trying to create an additional cache. But the create always ends with a generic failure: Creation of Cache '...' has failed. Please contact support. The operation failed. Please contact support for hel
-
How can I center a frame ?
I created a 820x480 frame and want to center it in my screen. Is there an easy option or do I have to retrieve the screen's x and y coordinates first ??? cheers, Anne