How to increase the time for detect a device down on Prime 2.0

Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your help

Go to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager>

Similar Messages

How to increase the time for threadstuck jdeveloper weblogic server

Hi,
This is a requirement for increasing the time for threastuck detection in jdeveloper weblogic server.
Few of my threads take a longer time than the default value for threastuck detection.
Could you please share the suggestions on how to do it?
i have tried by creating workmanager from the administration console but not aware of how to apply it to application(in web.xml).
Share inputs on this.
Thanks,
Devender

You are posting this on the wrong forum. All this in one of the server forums.
Timo

How to increase the memory for my weblogic server in Jdeveloper 12.1.2.0.0 ?

Hey everyone,
So as my title says, i'm trying to increase the memory for my weblogic server in my windows 7 64 bit machine, with 8GB ram.
The values appear to be: JAVA Memory arguments: -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
I've done some search from this forum and i've added this to my jdev.conf:
AddVMOption -XX:MaxPermSize=1536M (in this one i've only changed the value)
AddVMOption -Xmx1536M
AddVMOption -Xms1536M
And i've changed this: MEM_ARGS="-Xms1024m -Xmx1024m" in my startNodeManager.sh file
I'm still getting the same line in my server but i need to change the values since i'm not getting the server to run my application very well (it gets stucked in loading my databases and graphs) and i think it will continue untill i get a heap exception error.
Any ideas of how to change this?
Regards,
Frederico.

Thanks Alejandro .
I'm going to ask you another question and this one is quite important.
Whenever i run my project a couple of times, i'm not able to retrieve the page, it just gets stuck on loading.
It just stops the loading, like its a really really slow page. I'm not using a lot of rows in my database so i don't take to much memory but it doesn't load and i know everything is fine but i just added some graphs after testing it.
Do you know why?
In the console it says that everything is fine and shows the link for the page but it never loads completely until it gives a error because it does not respond in 600 seconds.
Strange right?

How to increase the time at the end of what aaa requeries the authentication of a client web

Hi All,
I configure ASA aaa to authentificate our internal web client to access to internet. It's check the username/password of client in our Active Directory.
When the client initiate the first connexion, the ASA request the login connexion and when it's correct, it authorise the access. But after 10 min for exemple, it's request again the login, and so one and so one. Approximativelly, after each ten minute, it requeste an username/password.
I want to know how can i increase the time between two authentifcation. Or increase the time of 10 min.
Thanks.

The authentication timeout is configurable via the "timeout uauth" command, and you can set either absolute or inactivity timeout.
Here is the command for your reference:
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/t.html#wp1569874

[login root user] - increase the time for authentification ROOT user in SH

Hello,
We have a server in production when OS version MACOSX 10.4.11 Tiger
The last week our monitorin system failed because the ssh session return time out.
I try login from Terminal and X11 and the time for autentification the ROOT sh session is betwen 40 and 80 seconds. (login to SSHD, login in sh shell, login in xterm, ......
Why root autentification in SSH an SH login have increased? Can you help me?
Marc

Hi Marc, and a warm welcome to the forums!
No expert here at all, but does this offer a clue...
http://search.cpan.org/~stevegt/IPC-Session-0.05/Session.pm

How to reduce the time for each clips up to 0,04 seconds?

Hi, I'm trying to realize my first time laps. I've need to reduce the time for each clips up to 0,04 seconds, but it seems that the minimum time is 0,1 second. There's a solution?

And use a zip file. Many people can't open RARs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to increase cpu time for a job

We have a application which submits a scheduler job. The job parses a blob and inserts rows into a table. It was running slow . On checking the scheduler tables I found out for actual time of 2 hours the job is taking cpu time of less than 2 minutes.
Can anybody help us with any idea to increase the CPU utilization by around 4 times so the job finishes in 30 minutes
Thanks
Saikat

Hi,
How long does it take when you run the same action that the job is running from sqlplus ?
This looks like more of an Oracle tuning question than a Scheduler question. You might get better answers if you gave more info about the pl/sql code being run and posted this to the general pl/sql forum here
PL/SQL
You can also try general PL/SQL profiling tools to see what statements in your code are taking the longest while to run e.g. AWR and ADDM if you have licenses for them.
Hope this helps,
Ravi.

How to increase the time of an introduction clip

Hi. I'm working on my first ever video. I have nearly completed everything, including the editing and
adding in a secondary sound track. I now need to add in voice over clips for each segment.
When recording the voice over for the lead-in segment (a fade from black segment with an illustrator heading/title), I realized that the voice-over required is significantly longer than the fade from black clip that I originally put into the video; the voice-over needed is 21.9 seconds long and the fade from black segment is only 5 seconds long.
I've tried simply moving the right edge of the lead-in segment to the right to extend the time, but nothing happens. I can't seem to get the entire video to extend its timeline. I must have obviously locked some or all of the segments, but I can't seem to figure out how to unlock them so I can extend the lead-in segment.
Can anyone tell me what I'm doing wrong, or what I need to do to fix this. Surely there is a simple way to extend the timeline of the lead-in segment, and I'm just missing it.
Thanks in advance to anyone that can offer suggestions.

Hi,
try moving everything to the "right" of the clip you want to extend...make longer ...to the right..out of the way....
If you have "handles" on that clip you can drag it out to the time you want...if you dont have handles you can drop a "new" instance of that clip in its place and make it as long as you want..

How to get the time for executing an SQL statement?

hi all...
How can I get the total execution time for a given SQL statement to a ViewObject which is created dynamically for this SQL so that the end user knows it before hand and try to stop it or go further..?
Please post any ideas if you have got..!!!
thanx in advance..
grÃ¼ss
KÂ°vi

This is not really a question for the JDeveloper forum, but rather for the DB forum.
Since Oracle9i there is a way to estimate how long a query will take, before executing it.
Check it out in the Oracle DB documentation or ask on the DB forum.
There is no built-in functionality for this in JDeveloper, but you should be able to call out to the DB from your Java code to get the estimate.

How to increase the time period in Debugger

Hi,
If we put Debugging screen Idle for some time,we will get timed out Status bar message.Can we increase that time period.

hi,
A work process which is processing your task is set into a DEBUG mode.
Debugging in general does requesting a huge memory consumption and system resources as well.
This means that system is moving data to its extended memory in PRIV mode.
In this mode normal request being processed by other work processes are located in local memory instead of extended. Extended memory is occupied by data for debugging user exclusively. However this cannot persist in system for a long time. So since you are not active in debugging session for some time system is canceling whole debugging with following messages:
1) Transaction from "PRIV" session reset after timeout (Message no. 14048)
2) Transaction from "DEBUG" mode (after timeout) reset (Message no. 14056)
From basis point of view for production system there should not be a necessity to adjust profile parameters in order to allow debugging for a long time and for a so much users. If you wish to avoid this message anyway or you want to make debugging more comfortable on development or test system you need to consider following profile parameters:
1)rdisp/max_priv_time # Standard value: 600
2)rdisp/wppriv_max_no # Standard value: MAX(1, Anzahl Dialog-WPs)
3)rdisp/max_debug_lazy_time # Standard value: 600
thanks and regards
chinnaiya

How to increase load time for mobile client platform on handhelds?

Hello Experts!
I have developed an application for my mobile client on handheld, but i have a problem with performance, my problem is on load of client, elapsed time to load this ambient is 25 seconds, somebody have a solution to increase a performance to load Mobile client on handhelds?
Regards
Ronaldo Rampelotti.

I was given this a long time ago back when I was developing on SP3
Not sure if they are all valid or more have been added.
I thought I posted this awhile ago, but can't find it maybe it got deleted.
These CSS properties are ALL or NONE, you cannot specify by View or by some class id.
I think there are suppose to be improvements in next version of MI client.
Name of the property
default
     stylesheet.default.backgroundcolor
     stylesheet.default.foreground
     stylesheet.default.font.name
     stylesheet.default.font.size
     stylesheet.default.height
     stylesheet.default.bordercolor
brandingarea
     stylesheet.brandingarea.backgroundcolor
     stylesheet.brandingarea.bordercolor
     stylesheet.brandingarea.font.size
     stylesheet.brandingarea.foreground
     stylesheet.brandingarea.height
     stylesheet.brandingarea.brandingtext
button
     stylesheet.button.backgroundcolor
     stylesheet.button.font.size
     stylesheet.button.foreground
     stylesheet.button.height
label
     stylesheet.label.backgroundcolor
     stylesheet.label.font.size
     stylesheet.label.foreground
     stylesheet.label.height
caption
     stylesheet.caption.backgroundcolor
     stylesheet.caption.font.size
     stylesheet.caption.foreground
     stylesheet.caption.height
inputfield
     stylesheet.inputfield.backgroundcolor
     stylesheet.inputfield.font.size
     stylesheet.inputfield.foreground
radionbutton
     stylesheet.radiobutton.radiobutton
linktoaction
     stylesheet.linktoaction.backgroundcolor
     stylesheet.linktoaction.font.size
     stylesheet.linktoaction.foreground
     stylesheet.linktoaction.height
statusbar
     stylesheet.status.backgroundcolor
     stylesheet.status.errorcolor
     stylesheet.status.messagecolor
     stylesheet.status.warningcolor
table
     header
     stylesheet.table.header.backgroundcol
     stylesheet.table.header.foreground
     stylesheet.table.header.height
     stylesheet.table.header.font.size
     content
     stylesheet.table.content.backgroundcolor
     stylesheet.table.content.foreground
     stylesheet.table.content.height
     stylesheet.table.content.font.size
     footer
     stylesheet.table.footer.backgroundcolor
     stylesheet.table.footer.foreground
     stylesheet.table.footer.height
     stylesheet.table.footer.font.size
imagebutton
     stylesheet.imagebutton.backgroundcolor
     stylesheet.imagebutton.font.size
     stylesheet.imagebutton.foreground
image
     stylesheet.image.backgroundcolor
I don't know about the client arguments, usually that was a guess\try and find out.

I am using my first apple product, mac book pro. somehow i FIGURED OUT HOW TO INCREASE THE FONT FOR SEARCHES AND WEB PAGES, BUT THE FONT IS TOO BIG AND FOR THE LIFE OF ME I CAN NOT FIND WHERE TO GET THE SCREEN BACK TO NORMAL, HELP ANYONE?

I am new to Apple, somehow I figured out how to make font of Web pages bigger, but it is too big and I can't use sites properly. for the life of me I can not how to get my font size reduced. Help anyone? thank you, sbb

Probably command-minus will do the trick.

How to increase the time of silde record.

Hi,guys!
sorry for my poor english.
I meet a problem.when i finished a full motion recording and
publish it.i found there so many swf files named *_Fullmotion*
under that folder.and all of them are necessary otherwise i can not
show my complete flash.how can i reduce the number of these swf
files?
Thank you.

Welcome to our community, Smileruner
This sounds like you have used Captivate and enabled the
"Full motion" recording option. Try using it differently. Use
Demonstration recording and you will still end up with many
different slides, but fewer actual files to distribute when you are
finished.
There are also issues you are probably unaware of with using
the Full Motion recording. If you create a recording that is long
enough, you end up seeing the "Red Screen Of Death" as playback
exhausts all available memory. Also keep in mind that it's quite
literally WYSIWYG. You cannot change aspects of Full Motion
recording after you are finished as you can with the other modes.
Cheers... Rick

How to increase the web session time out for FDM While data uploading.

I have very large data files of Balance Sheet and Profit & Loss. These are taking very long time while being loaded through FDM. Kindly let me know of the following:
1 - How can I increase the time for "web session time out" in FDM; and
2 - What is the standard data loading time, e.g. how much time should it ideally take for approximately 1,000 lines to be load in Hyperion.
Regards
Amjad
Edited by: ar_aff on Sep 12, 2011 8:30 AM

You supposedly feed it a (undocumented) parameter, -rxidletimeout, with the time in seconds, at startup.
app.serverSettings.sessionTimeout will report back whatever value you fed it. However, in my experience so far, the timeout is somewhere around 30 seconds no matter what value you feed it. I might be doing something wrong.
I currently have a ticket open with Adobe support about this very issue, but it's slow going. I'll try to update you with whatever I find out.
I'd love to hear whether anyone else has this working.
Jeff

How to increase the logout time

Hi Guys,
My PIA logs out for every 20 minutes. i do not want that happen. I want to increase the time for logout to 1 hour.
Can any suggest me how to do that?
Please help me.

Then you should be able to find under Peopletools menu, the webprofile configuration, choose the one you are using to start the webserver (if you don't know which one is using, check the configuration.properties file, it should be somewhere in that file), and modify the timeout on the next page.
Nicolas.

How to increase the time for detect a device down on Prime 2.0

Similar Messages

Maybe you are looking for