How to determine the real (effective) Service Level ov a material?

Hello Experts,
I have Service Levels of for example 92% or 98% for a material set up in the material master data ( MARC-LGRAD ). This shall mean in reality, that I can deliver in 92% or 98% of the cases the needed goods in the right quantity. Only in 8% or 2% of the cases I can not do that. Maybe I have nothing of that material in stock to deliver or I only have not enough of it.
The Service Level is one of the aspects affecting the reorder point and safety stock.
No I want determine for my materials what the "real" Service Level is based on maybe the deliveries?
Is there a standard report of SAP to check this? If not: does anyone has some hints for me how to code it myself?
Best Regards
Manfred

Hi Manfred,
This information is a bit tricky, becuase you don't always have it in the business process.
One of easy sources, is if you plan for sales, then you can see both what was ordered versus what was actually delivered.
But if you plan for internal consumption, lets say somebody goes to the store, and if the material is not there nothing is recorded in the system to testify for that.
Regards,
Mario

Similar Messages

How to determine the level Of FRBs

Hi All
Can anybody tell me how to determine the level of profit center ( FRBs)
in SAP. I mean for example that how will i find out the level the level of
FRBs in the table BSIS.

Below query will help
select Serverproperty('productlevel'),
Serverproperty('productversion'),
Serverproperty('edition')
The last column will show you edition which will confirm whether it is enterprise ,standard,evaluation or express
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to determine the support team in service ticket

Hi all,
can u guide me how to determine the support team in service ticket,
when ticket is created from customer system.is there any another way other than organizational structurel settings.
Thanks and regards,

Hi Venu,
You can get it done by development to determnie the support team , other tan org model settings
1.Develop the z table which will allow to maintain Sold to Party, Component, Support team
2. Implement the Badi for which will read the sold to party and component from the ticket and look in to ztable and fetch the corresponding support team and audate the support team feald in ticket.For this to take help of ur Abaper
3. For this to call the BADI have to confgure the actions with method call.
If u have any query revert
Regards,
Basha.

How do I Add the Real Time Service option to our Informatica Cloud partner account

Logging in a support request through MySupport works best.

We need to add the Real Time Service option to our Informatica Cloud partner account. What is the best way to do this? Should I contact the Informatica Cloud Global Customer Support team at: http://now.informatica.com/Cloud-ContactUs.html Or should I log a support request through: https://mysupport.informatica.com/ .

How to determine the IPS throughput using Cisco ASA 5500 IPS Solution?

Hello there!
I´ve been desinging a solution to protect de Server Farm and I intend to use the ASA 5500 series with AIP-SSM module. There´s any tool to determine the real throughput that I need? I mean, how to determine the performance (Firewall + IPS throughput), what main points I should consinder?

If the server farm is running production levels of traffic today you can get statistics off a variety of networking devices passing the existing traffic. Switches, routers and firewalls all count every byte of traffic they pass. There are plenty of tools that can gather this traffic into tables via SNMP too, such as MRTG.
Do not average your traffic over too great a time peroid, you will miss busy hour peaks. At most, use 5 min averages.
- Bob

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to determine the timeout setting?

I read all the items about the time out. I created a javascript function which informs you that you only have 5 (after that 1) minutes before logout. But in the profile file the setting for http timeout 180 and the rz11 setting icm/keep_alive_timeout is set to 60. But when waitng for 180 seconds I can still go on with the application. No timeout occur.
How can I determine the real timeout so I can use this in the setting for the Javascript (reading it for the system and concatenate into the javascript statement)!
With regards,
Frank Roels

Hai Frank,
You can follow the methodology described by thomas in this blog.
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1063. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
When I have opened this blog now it was not opened properly(Formating lost),Make sure that u read it properly.
Regard,
venkatesh.

How to determine the contract header's valid period...

1. How to determine the service contract header's start date, end date, when related muliple items with different start date and end date?
i.e., what is the different between the header's valid period and item valid period?
For example:
Sold to A has 5 items, which has different contract line item start date and end date, e.g.,
item 2: 2010.9-2011.9
item 3: 2011.4-2012.4
As for combined the all item bolonged to sold to A to one contract, so the item should have different contract start date and end date.
However, how to determine the contract header's start date and end date?
2. Another question is: When process service contract data migration from legance to CRM, how to design the above scenario logic?
Thanks in advance,

Sent again, to wait the answer....

How to improve the performance in AM level

Hi,
I am using Jdeveloper 11.1.1.2.0 and weblogic server 10.3.2.
How to improve the performance in AM level.
Actually i have approx 10 lacs Data but when search the record then it is taking more time.
I have following the link..
http://www.gebs.ro/blog/oracle/adf-view-object-performance-tuning-analysis/
but there is no effect in the performance level for seaching.
So please help me ..
Thanks
Anup

Hi Timo,
In search page,i m giving empId and click on search button then to execute query it is taking more time.I have override the VOImpl executeQuery(). then it is taking more time
@Override
public void executeQuery() {
setNamedWhereClauseParam("bind_draft", "D");
setNamedWhereClauseParam("bind_complete","%");
setNamedWhereClauseParam("bind_reject","%");
setNamedWhereClauseParam("bind_approve","A");
setNamedWhereClauseParam("bind_review","R");
super.executeQuery();
this method super.executeQuery() is calling and after 5 minutes heap space is comming on cosole as well as page also.
Thanks
Anup

How to find the header and item level status of a CRM contract ?

Hi,
Few questions
A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
B. How to get the BPs associated with a contract ?
Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
Note:
1.     It doesnt store the Business Partner
       responsible for the transaction. To
       get the Partner No, link it with
       CRM_ORDER_INDEX.
2.     This table can be used for search
       based on the Object Id(Business
       Transaction No).
CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
CRMD_LINK     Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
Note:
1.     It doesnt store the Business
      Transaction No (Object ID).
      To get the Business Transaction No
      link the table with
      CRMD_ORDERADM_H
2.   This table can be used for search
      based on the Partner No
CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
Pl.reward points.......

EEWB : how to determine the business object and the extension type ?

Hi,
I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
I need to add a new tab in the BaMI business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
Thanks for your help,
Marie

Marie,
In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
In the IMG:
Goto:
Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
You will then choose the transaction defined that you want to extend. If you display the details of the transaction you will find an attribute called:
"Leading Transaction Category". This tells you the general context in which the transaction is used. The other item to view is the assignment of business transaction categories found in the maintenance screen.
This information general corresponds to one of the options that the EEWB will give you on the transaction type.
As far as extensions go, my recommendation is the following:
- Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
- Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments. The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures.
Let me know if you have any further questions.
Good luck,
Stephen

Tablespace allocation type system how oracle determines the extent size

HI
It may be silly question but the I have to ask and get some knowdge
Suppose tablespace allocation_type is system then how oracle determins the inital extent and max extent size?

Was this tablespace converted to locally managed from an existing tablespace? If so, the existing extents still exist after the conversion. Also depending on the Oracle version and maybe platform the pct_increase parameter is still honored after the conversion which can lead to odd sizes. The current value of this parameter may not be the value that was in effect when extents were allocated.
Also Oracle enhanced the logic to not leave odd sized extents unused so that if by rights the system should take a 64K extent but there is a 56K extent available (perhaps at the end of a file) it can be used to fill the extent request.
HTH -- Mark D Powell --

I got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

Under Network Preferences, select the WiFi
click on "Advanced..." button
Select the network you want to delete from the list and click on "-"
Click "Ok"
Click "Apply"
Well done ;-)
You may also want to delete the wireless key from Keychain.
Open Keychain, seach for the old wifi network name, slect it and click delete

How to check the current EHP stack level? in SAP

Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA     701     0007
SAP_BASIS     701     0007
PI_BASIS     701     0007
ST-PI     2008_1_700     0003
SAP_BS_FND     701     0008
SAP_BW     701     0007
SAP_AP     700     0021
WEBCUIF     700     0008
SAP_APPL     604     0008
SAP_HR     604     0029
SAP_HRCAR     604     0029
SAP_HRCAT     604     0029
SAP_HRCAU     604     0029
SAP_HRCBE     604     0029
SAP_HRCBR     604     0029
SAP_HRCCA     604     0029
SAP_HRCCH     604     0029
SAP_HRCCL     604     0029
SAP_HRCCN     604     0029
SAP_HRCDE     604     0029
SAP_HRCDK     604     0029
SAP_HRCES     604     0029
SAP_HRCFI     604     0029
SAP_HRCFR     604     0029
SAP_HRCGB     604     0031
SAP_HRCHK     604     0029
SAP_HRCID     604     0029
SAP_HRCIE     604     0029
SAP_HRCIN     604     0029
SAP_HRCIT     604     0029
SAP_HRCJP     604     0029
SAP_HRCKR     604     0029
SAP_HRCMX     604     0029
SAP_HRCMY     604     0029
SAP_HRCNL     604     0029
SAP_HRCNO     604     0029
SAP_HRCNZ     604     0029
SAP_HRCPH     604     0029
SAP_HRCPT     604     0029
SAP_HRCRU     604     0029
SAP_HRCSE     604     0029
SAP_HRCSG     604     0029
SAP_HRCTH     604     0029
SAP_HRCTW     604     0029
SAP_HRCUN     604     0029
SAP_HRCUS     604     0029
SAP_HRCVE     604     0029
SAP_HRCZA     604     0029
SAP_HRGXX     604     0029
SAP_HRRXX     604     0029
EA-IPPE     400     0018
EA-APPL     604     0008
EA-DFPS     600     0018
EA-FINSERV     604     0007
EA-GLTRADE     604     0008
EA-HR     604     0029
EA-HRCAR     604     0029
EA-HRCAT     604     0029
EA-HRCAU     604     0029
EA-HRCBE     604     0029
EA-HRCBR     604     0029
EA-HRCCA     604     0029
EA-HRCCH     604     0029
EA-HRCCN     604     0029
EA-HRCDE     604     0029
EA-HRCDK     604     0029
EA-HRCES     604     0029
EA-HRCFI     604     0029
EA-HRCFR     604     0029
EA-HRCGB     604     0029
EA-HRCHK     604     0029
EA-HRCID     604     0029
EA-HRCIE     604     0029
EA-HRCIN     604     0029
EA-HRCIT     604     0029
EA-HRCJP     604     0029
EA-HRCKR     604     0029
EA-HRCMX     604     0029
EA-HRCMY     604     0029
EA-HRCNL     604     0029
EA-HRCNO     604     0029
EA-HRCNZ     604     0029
EA-HRCPH     604     0029
EA-HRCPT     604     0029
EA-HRCRU     604     0029
EA-HRCSE     604     0029
EA-HRCSG     604     0029
EA-HRCTH     604     0029
EA-HRCTW     604     0029
EA-HRCUN     604     0029
EA-HRCUS     604     0029
EA-HRCVE     604     0029
EA-HRCZA     604     0029
EA-HRGXX     604     0029
EA-HRRXX     604     0029
EA-PS     604     0007
EA-RETAIL     604     0007
FINBASIS     604     0008
ECC-DIMP     600     0018
ERECRUIT     604     0008
FI-CA     604     0008
FI-CAX     604     0007
INSURANCE     600     0018
IS-CWM     600     0018
IS-H     600     0024
IS-M     600     0018
IS-OIL     600     0018
IS-PS-CA     604     0007
IS-UT     600     0018
LSOFE     600     0018
SEM-BW     604     0008
ST-A/PI     01M_ECC600     0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AM

Hi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

How to determine the real (effective) Service Level ov a material?

Similar Messages

Maybe you are looking for