How to determine the u2018equivalent position of the same organizationu2019?

Hi,
"Position change is a transfer from one position to an equivalent position within the same org reporting structure and under the same chief position"
How to determine the u2018equivalent position of the same organizationu2019?
Cheers.

u can identity the position with help of the Holder
say for ex: A is the holder of the Position for Executive now the user performent an event called change of position so he changed to Manager (here we can find the chageing on the basis of some parameter so i have taken holder as Parameter as we dont know which has changed or wht has changed)
in this case we can use the report   RHDESC20  se38
not an exact solution for ur question
will try to find some other way

Similar Messages

  • How to get the Useru2019s position when the user doesnu2019t have CP relation

    We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
    Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
    Regards
    Paul

    Hi Paul,
    Have a look at these tables.
    Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
    Central business partner address data
    The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
    Relationships between business partners
    Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
    Hope this helps,
    Kind Regards,
    Matthew

  • How to get the cursor position in the text edit box?

    Hi, all.
    I want to get the cursor position in the text edit box
    to insert some data.
    But I don't know how to get.
    Can someone give me some advice?
    BestRegard.
    Miya.

    Hi Miya,
    Write your own textSelectionSuite for this.
    and use ITextTarget->GetRange() function.
    Thanks and Regards,
    Yopangjo.

  • How do i get an externally loaded movie clip to inherit the playhead position of the main timeline?

    Hi Flash experts, i'm hoping that someone can help me with this annoying problem.....
    I have been approached to design a configurator for a new television product. The Application will let users specify the colours of certain parts of the product and also attach addons, which then updates a cost total.
    In the main interface i have a looping animation of the product slowly rotating around 360 degrees that i rendered in 3ds max. When a user clicks a button on the interface i need to load an external movieclip on top of the main animation so it looks as though a certain part has changed colour, this i have acheived. The problem is that when i load the external clip over the original, the loaded clip starts playing from frame 1 and i need it to inherit the playhead position of the main animation so the two layered pieces look as though they are rotating as one. I'm sure this must be possible, unless i need to approach the problem in a different way?
    I hope this makes sense,
    Any help on this subject would be hugely appreciated.
    Many Thanks
    Matt

    Hi again Ned,
    I've almost got it i think, my code now looks like this....
    on (release) {
             var loader:MovieClipLoader = new MovieClipLoader();
             loader.loadClip("Bezel/Bezel_Red/Bezel_Red.swf",Empty_MC);
             var loadListener:Object = new Object();
             loader.addListener(loadListener);
             loadListener.onLoadComplete = function() {
             Empty_MC.gotoAndPlay(_root._currentframe);
    This code loads the external clip fine and i know the onLoadComplete listener is working because if i change the last line to: Empty_MC.gotoAndStop(1);
    it works. I think its just that last line: Empty_MC.gotoAndPlay(_root._currentframe); that is causing the problem?
    Many Thanks for all your help, it is greatly appreciated
    Matt

  • Get the current position within the PBEL Prozess

    Hi,
    In the BPELConsole I can see the the flow of every PBEL process
    instance and thus I see the current position within the process.
    How would you get the current position programatically, via SOAP e.g.?
    Kind regards,
    Martin

    Hi,
    there is a JAVA API provided by Oracle
    http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/toc.htm
    If you really need SOAP, you can build your own Java webservices with this API

  • Apple mail incorrectly promotes my name to the first position in the To: field

    I'm not sure how long this has been happening, but I recently noticed that my email address is always promoted to the first position of the "To:" field on messages that I receive. This is NOT a welcome feature. Why? Because the order of recipients that the sender addressed the message to is relevant context to understanding, and properly handling the message. Promoting my name to the first position in the To: field eliminates this context, making it seem as if I am the primary person that the sender expects a response from (one possible reason for addressing it to me first).
    Apple, you need to respect the content formatting choices of email messages. Maybe your interaction designers thought this would make me feel more special? More important? Not sure, but what it actually does, is it makes me have to look at the raw message source in order to find out whether or not I'm at the top of the list. This is a mis-step in the way you present email messages. I hope you will reconsider the design and go back to showing my name in the order entered by the sender.

    I have this problem too with my Macbook Air. Mail opens automatically every time my laptop sleeps. I actually just asked about this in my own thread. However, it is not causing my apps to freeze.

  • I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

    I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

    you can suggest it here - http://www.apple.com/feedback/iphone.html
    And it is only a problem if you want a blank first screen.  Personally, it would drive me nuts always having to swipe over one page to get to my apps - the only time I unlock my iPhone is to use it or run an app, so no, I have no need nor desire to have a first screen with no icons at all.
    But, if they'd put it in as an option so people like yourself can also have what they want, that's fine too    So send them your feedback (they actually do listen - iOS 5 includes a number of things people have been asking for on these forums, like being able to delete individual entries from the call history, inproved alerts/notifications, being able to opt out of all the location based data they collect,...).

  • Align TransparentContainer  to the center position of the browser

    Hi there,
    i would like to align my TransparentContainer to the center position of the horizontal point of view and to the the middle poition of the vertical point of view. I tried everything but nothing really worked. Maybe anybody of you has a good advice for me.
    Thanks,
    Albert

    Albert,
    There is a button on the toolbar using which you can center the entire BPM config.
    I don't remeber the icon and I am not infront of the system. But you should be able figure that out.
    I think its the 5th one from the left hand side, the one on the left hand side of 1:1 icon.
    Regards,
    Ravi
    Message was edited by: Ravikumar Allampallam

  • My iPhone 4 is locked in the horizontal position and the keypad. unable to send text messages

    uanble to send text messages. phone is locked in the horizontal position with the keypad. cannot type on the keypad,

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • How to determine most recent date from the date column of internal table

    Dear friends
    would you like to tell me. how i determine the most recently changed record by looking at date and time from internal table i am not supposed to sort the table by date and time... I must check date and time with other records date and time to determine which record is most recently changed...
    here the scenario is.
    id idnumber chdate chtime
    1 123456 20060606 135312
    2 123456 20060606 135900
    3 123456 20060606 132300
    4 123457 20060606 140000
    5 123457 20060606 142500
    in the above scenario i must keep in my mind that the most recently changed record is identical to its idnumber i can say that:
    the record should be fetched this way
    id idnumber chdate chtime
    3 123456 20060606 132300
    5 123457 20060606 142500
    because here the id 3 is the most recently changed in the idnumber 123456
    where id 5 is the most recently changed in the idnumber 123457
    please help me to determin how i am supposed to carry out this task any suggestion, code will be great help of mine.
    regards
    Naim

    After testing my suggestion above, I realized that it doesn't work because the delete adjacent actually will keep the first one and delete the rest.  I'm working with Srinivas's code a bit now,  I think it is almost what you want.  I am under the impression that you dont' want to HIGHest date/time, but just the last record of the sequence, if this is the case, then this code will help.  Here we will assign an index to each record per the idnumber, that way we can sort it and get the lastest record.
    report zrich_0001.
    types: begin of itab_type,
            id       type i,
            idnumber type i,
            chdate   like sy-datum,
            chtime   like sy-uzeit.
    types: end of itab_type.
    types: begin of itab_type2,
            id       type i,
            idnumber type i,
            index    type i,
            chdate   like sy-datum,
            chtime   like sy-uzeit.
    types: end of itab_type2.
    data: itab     type table of itab_type with header line,
          itab2    type table of itab_type2 with header line,
          prev_rec type itab_type.
    data: v_id type i.
    start-of-selection.
      itab-id       = 1.
      itab-idnumber = 123456.
      itab-chdate   = '20060606'.
      itab-chtime   = '135312'.
      append itab. clear itab.
      itab-id       = 2.
      itab-idnumber = 123456.
      itab-chdate   = '20060606'.
      itab-chtime   = '135900'.
      append itab. clear itab.
      itab-id       = 3.
      itab-idnumber = 123456.
      itab-chdate   = '20060606'.
      itab-chtime   = '142500'.
      append itab. clear itab.
      itab-id       = 4.
      itab-idnumber = 123457.
      itab-chdate   = '20060606'.
      itab-chtime   = '140000'.
      append itab. clear itab.
      itab-id       = 5.
      itab-idnumber = 123457.
      itab-chdate   = '20060606'.
      itab-chtime   = '120000'.
      append itab.
      clear itab.
    <b>  data: counter type i.
    * Assign an index to each row per idnumber
      loop at itab.
        on change of itab-idnumber.
        if sy-tabix > 1.
          clear counter.
          endif.
        endon.
        clear itab2.
        move-corresponding itab to itab2.
        counter = counter + 1.
        itab2-index = counter.
        append itab2.
      endloop.
    * Sort it and get rid of older records.
      sort itab2  by idnumber ascending
                     index descending.
      delete adjacent duplicates from itab2 comparing idnumber.</b>
      read table itab2 with key idnumber = '123456'.
      write:/ itab2-chdate, itab2-chtime.
      read table itab2 with key idnumber = '123457'.
      write:/ itab2-chdate, itab2-chtime.
    Regards,
    Rich Heilman

  • How to control the cursor position in the Table control in Module pool

    Hi,
    Can any body tell me how to change the cursor positon from last field of the first record to the
    first field of the second record , when user presses enter in the last field in the module pool
    programming.
    Thanks

    Hi,
    Please avoid posting duplicate posts.
    Re: how to get the cursor position from screen in module pool program
    Nag

  • Stepper motor 8SMC1-USBhF and power meter PM100D: how to merge the two VIs into one and make a XY graph of the current position and the power

    Hi there,
    I have a stepper motor (8SMC1-USBhF) and a power meter (PM100D). I want to measure the power while the stepper motor is moving, and obtain an XY graph with the current position on x axis and the power on y axis. So I just merged the two VIs together by copying and pasting, and created local variables for current position and readout value, and changed them to read, and then linked them to the XY graph, but apparently it doesnt work.
    So could you please instruct me how to merge them and obtain an XY graph appropriately?
    Attached are the two VIs.
    Thank you!
    Attachments:
    PM100D Simple Example.vi ‏42 KB
    StepperMotor.vi ‏97 KB

    Hello,
    The XY graph requires that each datapoint on the X axis corresponds to a datapoint on the Y axis.  To create XY data you will need to creat two arrays of X data and Y data with the same amount of elements then cluster the two arrays together to wire into the XY graph.  As an example take a look at the VI snippet below.  Is there a specific error being thrown?
    Regards,
    Isaac S.
    Applications Engineer
    National Instruments

  • How do you read the camera position in the 3d picture control?

    Hello,
    There is a method to setup the camera position, but how do you read the current camera position?  e.g. the user uses the mouse, ctrl, and shift, to change the camera position.  How do you read this new camera position?  There don't seem to be any properties to do this.
    I've read this thread:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=214629&requireLogin=False
    but the question was never answered....
    From the comments in that thread, even if you had the proper documentation for the "Model Matrix" property, you couldn't get the information necessary to calculation the camera position.

    Lorielle,
    Thanks for the VI.
    Could you point me towards a more detailed description of the "Modelview Matrix" property?  I've attached a screenshot from the online help.  It is not very helpful.
    Attachments:
    Modelview Matrix.jpg ‏71 KB
    Modelview Matrix1.jpg ‏71 KB

  • How to determine via SQL who created the sales order

    Hello I am trying to determine via SQL who created the Sales Order.  I'm looking at the ADOC table but having a hard time determining which record points to the sales order creation.

    Hi Jimmy,
    Try this:
    select
         T0.[DocNum], T2.[DocDate], T2.[CardCode], T2.[CardName],
         T1.U_NAME as [User Name], T2.UpdateDate as [Cancelled Date]
    from
         ORDR T0
         inner join OUSR T1 on T0.UserSign = T1.UserID
         inner join ADOC T2 on T0.DocNum = T2.DocNum
    where
         T2.LogInstanc = (select min(LogInstanc) from ADOC T3 where T3.ObjType = 17 and T3.DocNum = T0.DocNum and T3.CANCELED = 'Y')
         and T2.CANCELED = 'Y'
         and T2.ObjType = 17
    group by
         T0.DocNum, T2.DocDate, T2.CardCode, T2.CardName, T1.U_NAME, T2.UpdateDate
    Kind Regards,
    Owen

  • How to determine where Music Manager stores the fi...

    Hi!
    Is there any way to tell to Music Manager how I want my mp3 files to be stored in my 9300i phone?
    I have created one folder in my laptop where I have copied music files from different artists and different albums. I try to use the random transfer from this folder and I want the files to be copied to my phone similarly (that is all files in the same folder). All I get is a separate folder for each and every artist and below that a folder for each and every album.
    I could use the File Manager to move the files to my phone, but I'd like to use the random transfer in Music Manager...

    That's the way Nokia Music Manager works. Artist -> Album -> Song. It's the whole idea of the manager.
    Previous phones: 3330, 3410, 3510i, 3200, 6230, Nokia N70, Nokia N73, Nokia N82, Nokia 5500 Sport & Nokia N97
    Current: Nokia N900

Maybe you are looking for