How to determine transaction for MIRO badi - invoice_update?
Dear All:
As subject. Because I want to print report when transaction is credit memo.
But i have not fine any parameter is for transaction, please help.
Thanks a lot!!
Best Regards,
Nicole
Hi,
This will help you out....
MIRO: BAPI_INCOMINGINVOICE_CREATE
Thanks,
Krishna...
Similar Messages
-
HOW TO DETERMINE MESSAGES FOR CHATTING IN SAP
HI,
sap gurus,
HOW TO DETERMINE MESSAGES FOR CHATTING IN SAP
LIKE YAHOO CHAT.
THIS IS 100% POSSIBLE IN STD. SAP
AND ONE YEAR BACK I DID IT BUE I HAVE FORGOTTEN THE PATH TO DO IT.
CAN ANY BODY SAY ABOUT THIS
how can i configure message determination in spro.
any clues plz
regards,
balaji.t
09990019711.hi,
a) SAPmail has functions to display system messages to broadcast all users.
b) Transaction sm02 will provide text boxes to submit a system-wide message.
c) This must be set up as a profile parameter (login/messagecreate=true). Once the value is set, users can send it with the options under menu path system->status.
d) Only users with SAP_ALL authorizations can broadcast from transaction sm03
regards
sadhu kishore -
How to create transaction for a maintenance view, Thank you.
How to create transaction for a maintenance view,
Thank you.
deniz...Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks -
How to find Transaction for a Known Table maintenance View
Hello Friends,
May I know how to find transaction for a known table maintenance View.
Thanks,
Best Regards,
Sudhanshu GargGoto SE16 Transaction and enter TSTCP Table
Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
enter table name in bold.
Thanks
Seshu -
How to create transaction for FM
Hi All,
Can anybody please let me know How to create transaction for FM which can direct run by passing value and return the result.
I want to create transaction code for my function module.Please let me know how we can achieve that. tahnsk in adavance.
Regards,
Kalpana
Message was edited by:
kalpana kHi,
You can create transaction code for your FM. First create a report program in SE38. and call you FM as shown in below example.
report Zxyz.
constants: gc_viewname like dd02v-tabname value 'YFIT_COST_RATE'.
start-of-selection.
call function 'TABLE_CUSTOMIZING_MAINTENANCE'
exporting
tabname = gc_viewname
exceptions
no_views = 1
others = 2.
if sy-subrc <> 0.
message a007(e2) with gc_viewname.
endif.
similar to this FM you can call your FM and you can write your processing logic after FM call.
thanks,
sksingh -
I am using BADI 'INVOICE_UPDATE' to update a flag 'ZLSPR' in header data on SAVE in MIRO transaction. but the method 'CHANGE_AT_SAVE' in this BADI only has import parameters. No export parameters. Can anyone advice:
1) if I can use this method to change values?
2) is there anyother badi available for this transaction.
Thank you.Hi,
Can you pls help me as my requirment is also same.I have to change the "Base Line Date" i.e. ZFBDT field of BSIK which is there in the Importing Parameters of method "CHANGE_AT_SAVE". Can i change the importing parameters..
If you get any alternate solution for the same, pls suggest me
Regards,
Rushikesh -
How to create transaction for table maintinance generator
what is the procedure(steps) to create transaction for a table maintinance generator
Hi,
The link will be useful for ur requirement.
allaboutsap.blogspot.com/2007/04/table-maintenance-in-sap-step-by-step.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8129f164-0a01-0010-2a8e-8765287250fc
REgards,
Sarosh -
How to determine target for links in search results
I've created an autoquery custom search portlet.
The search results are by default showed is this portlet.
The text items which are found display a link to their content.
When clicked, the content is showed in a style different from the page on which the portlet was placed, and at full screen.
How can I force the content to display on a page of which I can determine the style and layout?
Thanks,
TonUnfortunately there's no way to do this directly at the moment although this functionality is planned for a future release.
However, its possible to acheive the same effect by using procedures associated with the Text item type.
To learn more about this, navigate to the Shared Objects page group, click on "Item Types" and edit the "Text" item type. Click on the "Procedures" tab. The help on the screen has information about creating custom procedures to render information associated with the item.
Also see a Body text in custom search results to this forum. -
How system read transaction for movement type
Dear friends,
We are facing problem - in case of movement type 101 system is reading PRD transcation key for valaue of inventory with another transaction key WRX. I dont know the logic how system read transction key.
If I use 101 movemment type then how system reads transcation key ie. GBB, PRD etc..... I need to know that logic . Please let me know and give me transction code to same I can check for other movement types.
Thanks
raviTcode OBYC is where all these transactions keys and all the G/ls are assigned to them.
There are normal accounting entries at time of GR i.e.
Material - Debit
GR/IR - Credit
AT IR:
Vendor - Credit
GR/IR - Debit
Now on above entries, system looks for transaction key for material and post its entry and then key for Gr/IR and posts the credit
entry in case of GR and vice versa for IR.
Please check these answered links for further details:
obyc
OBYC
OBYC
OBYC transaction?
Edited by: Afshad Irani on Apr 20, 2010 4:04 PM
Edited by: Afshad Irani on Apr 20, 2010 4:05 PM -
How to determine reason for socket write failure
Hi,
I'm new to socket programming in general, so please bear with me. I've looked around on the forums quite a bit, and haven't found an answer to this question.
I'm working with server code which creates TCP connections over an air interface with a mobile phone client. Since the air interface is inherently unstable, we rely on the TCP buffering/retry mechanism to store up to its capacity of messages if the client is temporarily non-responsive. Since we are sending small amounts of data, this will actually last for quite a while (several minutes or more depending on how much data we are needing to send). As part of an audit mechanism to detect lost clients, I do a write of a "heartbeat" to the socket and if the write fails, I can assume that either the buffer is full (meaning the mobile "went away" either due to loss of battery power, driving through a very long tunnel, etc.), or the mobile actively disconnected the socket.
However, I'd like to know if there is a way to determine the reason for the write failure? I catch the exception, but as far as I can tell they are all IOExceptions. Is there any way to further delineate the reason for a socket failure?
Any help would be greatly appreciated.
Thanks,
-LisaIf you're in a hurry, I don't have an answer for you.
That said, it was an intriguing enough question that I did some poking around as well. There is a socket exception class, but generally speaking, the only methods that throw socket exceptions tend to deal with defining, creating and closing the socket.
Communicating through the socket is done through input and output streams, and like any other streams, those throw I/O exceptions. I suspect you're catching IOEs because you're using streams. Unfortunately, even Socket.sendUrgentData( int data ) also returns an IOException rather than an SException.
In the interests of covering all the bases, are the IOE messages unsufficient? That is, try...
} catch ( IOException ioe ) {
System.out.println( "IOException: " + ioe.getMessage() );
}...might give you enough information to make a guess at whether the buffer is full or if the foreign host has closed the connection. I would suspect this feature is architecture dependent - UNIX systems might have more detail than Wintel systems.
As a last resort, you could extend the InputStream class and do the appropriate testing when writing/sending your packet. I would think that the only cases you can test for are whether the buffer is full (by maintaining a copy of the buffer and updating as appropriate), the mobile is currently sending data, or if the mobile is just not available.
Conventional Java isn't really the best for this because I'm not sure the JVM security model really wants to allow you to directly analyze TCP packets (otherwise you could just check for ACK statements). JME might have an easy solution that we didn't know about and you should ask on the appropriate forum. Alternatively, you might want to think about using C to write a library that handles connections this way, and externally call the library from the rest of your Java program. -
How to determine count for the number of rows
Appreciate if any of you could think of a way of determining the count for the number of rows in the subquery without having to run another query.
SELECT *FROM
(SELECT rownum, rn, rlp_id, rlp_notes, cad_pid, status, jurisdiction_id, s.state_abbr, rlp_address, rlp_route_id, rlp_route_section, psma_version FROM ipod.relevant_land_parcels r, state s WHERE s.state_pid = r.state_pid(+) AND rlp_route_id = 'SM1' AND status = 'CURRENT')WHERE rn > 200 AND rn < 216
And I want to import this into.net and C# environment.Something like this,.....????
SQL> select * from emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17/12/1980 800,00 20
7499 ALLEN SALESMAN 7698 20/02/1981 1600,00 300,00 30
7521 WARD SALESMAN 7698 22/02/1981 1250,00 500,00 30
7566 JONES MANAGER 7839 02/04/1981 2975,00 20
7654 MARTIN SALESMAN 7698 28/09/1981 1250,00 1400,00 30
7698 BLAKE MANAGER 7839 01/05/1981 2850,00 30
7782 CLARK MANAGER 7839 09/06/1981 2450,00 10
7788 SCOTT ANALYST 7566 19/04/1987 3000,00 20
7839 KING PRESIDENT 17/11/1981 5000,00 10
7844 TURNER SALESMAN 7698 08/09/1981 1500,00 0,00 30
7876 ADAMS CLERK 7788 23/05/1987 1100,00 20
7900 JAMES CLERK 7698 03/12/1981 950,00 30
7902 FORD ANALYST 7566 03/12/1981 3000,00 20
7934 MILLER CLERK 7782 23/01/1982 1300,00 10
14 rows selected
SQL>
SQL> select max(rw) from
2 (
3 select empno , row_number () over (order by empno) rw from emp
4 where job='CLERK'
5 )
6 /
MAX(RW)
4Greetings...
Sim -
How to determine eligibility for applecare
I bought an used MacBook Air. I was told that it was purchased in Nov. 2011. How do I make sure of this before buying Applecare?
Apple - Support - Check Your Service and Support Coverage
-
AP1131 - how to determine "elevation" for location server?
I have some AP1131's. These have internal omni-directional antennas, so they are just square boxes with a plastic cover on the top and a mounting bracket on the bottom. I think they are supposed to be mounted upside-down on the ceiling (horizontally), but I'm not sure.
Mine are mounted in the ceiling, but vertically, so the top cover is pointing towards a certain area of the building instead of the floor.
So I'm trying to figure out how to set the "elevation" in the location server maps. I read that 0 degrees means the top cover of the AP points to the right (east), and 180 means it points to the left (west), and 90 degrees means it points down toward the floor. So I think I need to set mine up as 0 degrees or 180 degrees, but how do I tell it that it's pointing north or south?Check the two following documents:
http://www.cisco.com/en/US/docs/wireless/wcs/5.0/configuration/guide/wcsmaps.html#wpmkr1129876
- The antenna angle is relative to the map's X axis. Because the origin of the X (horizontal) and Y (vertical) axes is in the upper left corner of the map, 0 degrees points side A of the access point to the right, 90 degrees points side A down, 180 degrees points side A to the left, and so on.
- The antenna elevation is used to move the antenna vertically, up or down, to a maximum of 90 degrees.
AP configuration antennas
HTH -
How to determine reason for shutdown
Hi all,
My Mac Pro seems to shutdown unexpectedly on occasion and I'm at a loss to explain why. It happens late at night and though I'm not sure, perhaps only early morning on Thursdays. Now, I've checked to see if the Energy Saver settings have a scheduled shutdown, and there isn't anything checked there, so it's not something that I've intentionally set. I don't believe there was a power failure or any similar external cause. I assume I want to look in the system logs to find the reason for the shutdown, but I can't seem to find the event. Where exactly should I look and what keyword would I search for. Any thoughts?
PS This happened a few times while still running 10.6 as well, so I don't think it's a 10.7 specific issue, but that is what I'm running now.
DCI have never tried rebooting and leaving it alone for any length of time. It doesn't happen often enough for me to be able to test that reliably, though I could try it next Wed. night since that seems to be the preferred night. Thing is, I don't think it happens every week even. I guess what I should do is do a manual shutdown and then look in the logs for where that info is stored and the trace back over the last 24 hours to see if I can find where it happened.
Not sure what you're looking for in the top command, but here you are. Couldn't quite squeeze everything in, looks like there's a dozen and a half processes left at the bottom that were past the pagination.
Processes: 113 total, 7 running, 3 stuck, 103 sleeping, 565 threads 14:39:07
Load Avg: 2.98, 2.65, 2.53 CPU usage: 10.61% user, 3.65% sys, 85.72% idle
SharedLibs: 15M resident, 7768K data, 0B linkedit.
MemRegions: 22095 total, 1821M resident, 65M private, 575M shared.
PhysMem: 1077M wired, 2669M active, 1555M inactive, 5301M used, 6975M free.
VM: 274G vsize, 1120M framework vsize, 132510(0) pageins, 0(0) pageouts.
Networks: packets: 78838/37M in, 74872/19M out. Disks: 2646089/28G read, 2510875/19G written.
PID COMMAND %CPU TIME #TH #WQ #POR #MREG RPRVT RSHRD RSIZE VPRVT VSIZE PGRP
26916 sed 0.0 00:00.00 1 0 17+ 22+ 268K+ 240K+ 556K+ 17M+ 2378M+ 26913
26915 sed 0.0 00:00.00 1 0 17+ 22+ 268K+ 240K+ 556K+ 17M+ 2378M+ 26913
26914- icalBuddy 0.0 00:00.55 5/1 4 45+ 110+ 13M+ 9680K+ 17M+ 101M+ 687M+ 26913
26913 sh 0.0 00:00.00 1 0 17+ 22+ 332K+ 840K+ 856K+ 17M+ 2378M+ 26913
26865 SyncServer 0.0 00:00.17 4 3 49+ 89+ 8632K+ 9544K 14M+ 94M+ 2480M+ 26865
26719 ReportCrash 60.4 00:03.31 6/1 2 85+ 165+ 28M+ 8108K+ 63M+ 171M+ 2572M+ 26719
26683 top 5.5 00:02.70 1/1 0 34 29 2116K 216K 2824K 17M 2378M 26683
26676 ocspd 0.0 00:00.01 1 0 25 23 568K 268K 1876K 17M 2378M 26676
25931 bash 0.0 00:00.01 1 0 20 23 360K 840K 1088K 17M 2378M 25931
25926 xterm 0.0 00:00.18 1 0 32 72 1300K 2804K 2748K 18M 2382M 327
25609 cookied 0.0 00:00.06 2 1 38 73 2712K 224K 3420K 96M 2457M 25609
21154 ssh 0.0 00:01.11 1 0 25 28 1060K 240K 2600K 18M 2378M 21154
12993 ssh-agent 0.0 00:00.16 3 1 45 85 1684K 280K 3280K 151M 2511M 12993
7736 mdworker 0.0 00:00.82 4 1 54 111 3812K 14M 9532K 165M 2548M 7736
1481 Console 0.0 00:30.47 3 2 121+ 342+ 28M+ 27M 146M+ 246M+ 2712M+ 1481
856 Image Captur 0.0 00:00.22 2 1 88 98 4188K 10M 10M 139M 2534M 856
855 AppleMobileD 0.0 00:00.40 3 1 49 100 11M 8972K 16M 106M 2484M 321
842 PTPCamera 0.0 00:00.32 4 1 91 112 4032K 10M 9444K 159M 2563M 842
769- PluginProces 0.5 00:34.99 14 1 264 598 19M 23M 35M 191M 872M 325
741- Microsoft AU 0.0 00:00.07 2 1 73 102 1500K 10M 3740K 162M 765M 741
704- FNPLicensing 0.0 00:00.37 3 1 44 80 2460K 244K 3544K 118M 686M 704
677 Caffeine 0.0 00:00.14 2 1 80 123 2608K 11M 8608K 133M 2549M 677
676 GeekTool 1.7 01:06.85 10 7 156 180 6796K+ 19M 15M 176M 2584M 676
675- ChronoSyncBa 0.0 00:01.34 3 1 84 130 1980K 12M 5604K 156M 766M 675
672- AAM Updates 0.0 00:05.46 3 1 92 241 5648K 15M 11M 166M 811M 672
666- SymSecondary 0.0 00:00.06 2 1 67 102 1484K 10M 3544K 132M 735M 666
665- SAVDiskMount 0.0 00:00.04 2 1 29 60 708K 216K 1508K 74M 650M 665
664- ScanNotifica 0.0 00:00.06 2 1 70 104 1404K 10M 3496K 139M 742M 664
662 taskgated 0.0 00:03.43 3 1 37 83 1912K 7648K 3776K 157M 2533M 662
656- SymQuickMenu 0.0 00:00.14 3 1 86 166 2804K 12M 6784K 160M 766M 656
655 AirPort Base 0.0 00:00.01 3 1 37 70 968K 220K 2308K 98M 2467M 655
650 imagent 0.0 00:00.47 4 1 86 137 3840K 7756K 7336K 150M 2547M 650
645 warmd_agent 0.0 00:00.01 2 2 34 59 768K 220K 2020K 60M 2428M 645
624 bash 0.0 00:00.01 1 0 20 24 356K 840K 1088K 17M 2378M 624
621 AppleSpell 0.5 00:17.47 2 1 55 111 6192K 11M 13M 169M 2558M 621
603 quartz-wm 0.0 00:00.35 3 1 64 127 1936K 11M 6400K 153M 2548M 603
462 Xquartz 0.0 00:00.00 1 0 25 38 336K 220K 1592K 13M 2389M 462
461 xinit 0.0 00:00.00 1 0 21 35 272K 1004K 684K 9668K 2379M 402
402 sh 0.0 00:00.01 1 0 18 23 244K 836K 908K 9648K 2378M 402
401 xterm 0.0 00:00.50 1 0 32 73 1004K 2804K 2504K 9828K 2382M 327
397 aosnotifyd 0.0 00:00.42 3 1 54 314 5172K 8684K 10M 493M 19G 397
394 filecoordina 0.0 00:00.01 2 2 40 59 908K 216K 2128K 97M 2465M 394
381 hdiejectd 0.0 00:00.04 2 1 37 54 784K 248K 2064K 82M 2443M 381
372 diskimages-h 0.0 00:00.41 3 1 63 90 1892K 9540K 5964K 132M 2524M 372
370 WebProcess 0.0 00:47.53 5 1 139 1448 107M 33M 200M 341M 3872M 325
361 com.apple.do 0.0 00:00.16 2 1 95 138 4076K 12M 12M 158M 2562M 361
359 FileSyncAgen 0.0 00:05.27 11 3 141 182 12M 10M 21M 125M 2561M 359
356 fontd 0.2 00:12.28 3 2 91 218 5032K 8368K 7412K 136M 2552M 356
337 Finder 0.2 01:00.62 5 3 178- 434 25M- 39M 48M- 157M 2650M 337
336 SystemUIServ 0.1 01:04.66 3 1 335 307 17M 22M 31M 187M 2605M 336
335 talagent 0.0 00:00.24 2 1 93 113 3832K 10M 8824K 168M 2563M 335
334 Dock 0.0 00:09.68 3 1 217 1217 41M 29M 67M 87M 2629M 334
333- AdobeAcrobat 0.2 00:34.33 25 3 167 451 17M 21M 55M 114M 928M 333
332- Papers 0.0 00:04.37 11 1 174 562 32M 33M 51M 183M 863M 332
331 AppleScript 0.0 00:00.77 2 1 100 206 16M 29M 32M 148M 2597M 331
330- Microsoft Wo 0.2 00:14.72 5 3 286 619 36M 65M 97M 350M 1215M 330
329 iCal 0.0 00:16.02 5 1 172 391 46M 28M 88M 177M 2666M 329
328 Mail 0.0 02:28.45 8 1 334 1107 89M 63M 174M 319M 3875M 328
327 X11.bin 0.7 00:11.93 7 1 128 370 12M 34M 36M 130M 2614M 327
326- Aquamacs 0.3 00:20.21 2 1 92 294 18M 26M 32M 176M 852M 326
325 Safari 0.0 00:36.19 9 2 236 771 52M 74M 94M 198M 2733M 325
321 iTunes 0.7 01:14.70 17 2 442 650 112M 36M 158M 401M 3807M 321
320 pboard 0.0 00:00.00 1 0 27 43 536K 220K 1144K 20M 2380M 320
317 UserEventAge 0.0 00:00.46 3 1 224 178 5096K 9716K 10M 177M 2556M 317
279- navx 53.3 59:20.71 2/1 1 31 187 259M 4476K 268M 395M 969M 122
276- LiveUpdate 0.0 00:00.11 2 1 68 104 1600K 11M 4856K 90M 680M 122
272- scheduledSca 0.0 00:00.02 3 1 44 74 824K 2360K 1812K 78M 649M 122
207 distnoted 2.0 02:10.97 15 14 153 117 5044K 240K 5740K 169M 2537M 207
205 mdworker 0.1 00:17.16 4 1 59 172 23M 11M 42M 167M 2563M 205
203 distnoted 0.0 00:04.15 5 4 44 94 1272K 240K 1968K 140M 2508M 203
201 launchd 0.0 00:04.97 2 0 354 110 1388K 564K 1976K 156M 2517M 201
198 launchd 0.0 00:00.01 2 0 53 51 524K 416K 968K 57M 2418M 198
168 coreaudiod 0.0 00:00.64 4 2 351 123 3892K 880K 5868K 163M 2527M 168
158 logind 0.0 00:00.01 2 1 34 54 812K 216K 1988K 87M 2447M 158
146 CVMServer 0.0 00:00.01 1 0 66 49 576K 252K 1260K 30M 2390M 146
145 WindowServer 1.3 01:50.65 19 1 445 1617 39M 150M 184M 184M 3447M 145
122- NortonMissed 0.0 00:10.07 2 1 33 53 664K 216K 1444K 62M 630M 122
121- SymAutoProte 0.1 00:35.46 8 1 247 193 246M 4500K 250M 388M 970M 121
106 racoon 0.0 00:00.06 3 1 38 63 924K 240K 2552K 91M 2452M 106
82 applepushser 0.0 00:02.57 3 1 60 84 3304K 7936K 7684K 161M 2538M 82
80 autofsd 0.0 00:00.02 2 2 37 60 928K 220K 2184K 90M 2458M 80
75 dynamic_page 0.0 00:00.02 1 0 24 24 236K 212K 812K 9648K 2378M 75
73 hidd 0.8 00:08.22 6 4 72 93 1612K 240K 2596K 139M 2508M 73
71 kdc 0.0 00:00.15 2 2 48 89 1508K 484K 3236K 128M 2497M 71
70 KernelEventA 0.0 00:00.03 3 1 35 56 640K 220K 1288K 65M 2426M 70
68 loginwindow 0.0 00:00.68 2 1 273 212 8972K 23M 19M 150M 2575M 68
66 mds 1.8 04:22.48 9/2 7 162 696+ 299M+ 21M 159M+ 1177M+ 3654M+ 66
65 netbiosd 0.0 00:00.36 4 4 46 93 1964K 340K 3672K 127M 2496M 65
61 revisiond 0.0 00:00.04 4 2 39 71 1156K 216K 2576K 103M 2472M 61
59 stackshot 0.0 00:00.02 3 1 39 63 900K 220K 1608K 114M 2482M 59
58 rpc.statd 0.0 00:00.02 1 0 22 27 220K 216K 608K 49M 2410M 58
57 SystemStarte 0.0 00:00.03 2 1 37 68 864K 220K 1504K 113M 2481M 57
55 usbmuxd 0.0 00:00.97 3 1 54 98 1960K 1824K 4088K 146M 2508M 55
54 warmd 0.0 00:00.20 3 2 39 87 5508K 224K 6880K 153M 2521M 54
52 cron 0.0 00:00.01 1 0 24 32 368K 216K 964K 19M 2379M 52
51 ntpd 0.0 00:00.23 1 0 28 35 568K 220K 1560K 19M 2379M 51
49 awacsd 0.0 00:00.14 2 1 43 65 2196K 7936K 6644K 80M 2465M 49
34 securityd 0.0 00:03.29 4 1 103 84 6220K 7504K 7824K 159M 2536M 34
25 coreservices 0.0 00:07.73 4 1 377 446 6508K 18M 22M 155M 2558M 25
23 blued 0.0 00:00.58 3 1 118 75 3636K 7484K 5840K 120M 2497M 23
20 fseventsd 0.6 01:39.11 27/1 1 129 138 12M 216K 14M 1892M 4253M 20
19 distnoted 1.1 01:00.32 11 10 114- 99- 2424K- 236K 3080K- 166M- 2534M- 19
18 powerd 0.0 00:00.37 2 1 80 75 2320K 7416K 3340K 148M 2524M 18
17 syslogd 0.2 00:03.16 4 0 67 72 1604K 220K 1960K 165M 2526M 17 -
Hi experts,
Can anybody help how to create transaction for table maintenance generation?
Thanks in advance,
Zak.Hi
Check this:
Table maintennace generator is used to create screen to maintain values in a table. Once you create maint generator you can goto transaction SM30 and add data to table . In SAP it is more relevant to customizing data.
Create a table maintance program for a z table :
In transaction SE11, in the attribute tab of your z table check table maintenance check box. Go to SM30 transaction, enter the ztable name and click on maintain button. Here you can enter new entries into the ztable .
Or
You can create a PARAMETER TRANSACTION for the transaction for SM30 .
Follow these steps :
1. go to transaction SE93 , give your own transaction code say ztran_tab, for maintaining your ztable.
2. Click on create button and check the radio button Transaction with parameters (PARAMETER TRANSACTION) and click on the tick button.
3. In the next screen enter default values:
transaction : SM30
check the check box skip initial screen
4. Scroll down you will find a table control for default values
Name of the screen field | value
VIEWNAME | your ztable name
SHOW | X
Save your work.
Now as you have created a custom transaction for maintaining your ztable this transaction can be called from any program with CALL transaction 'XXX'.
Regards,
Vishwa.
Maybe you are looking for
-
Hi All, We are trying to send the data of F110 from R/3 to PI system by using 2 IDOC types EUPEXR and PAYTEXT. We are receiving the IDOC's in the PI system but, we would like to have the data of the IDOC type EUPEXR and PAYTEXT, where as we are getti
-
How do you fix the problem. Here's a suggestion. Let us access Adobe CC via the Apple App store. That works. Adobe CC doesn't
-
I HAVE IMAC BUT UNFORTUNATELY MY WIFI COANNECTION EVERY MINUTE DISCONNECT I USE VERIZON FIOS. WHAT SHOULD I DO?
-
Cant watching streaming video keep get error code 2048
I cant figure out how to watch the video every time i open the link it sends me to a new page which shows the video loading then this message show up - the operation couldnt be completed the file is not a movie file(-2048) the video works on my dads
-
Hi I have in my selection screen CONDITION TYPE (T685-kschl) as Select-options (mandatory) CONDITION TABLE (T682I-Kotabnr) as Select-options (mandatory) PLTGROUP (Tvk8-kvtr8) as Select-options BRANDCODE ( Tvm1-mvgr1) a