How to dial phone # from calendar

I am very frustrated that I can't seem to dial a phone number I entered as an event in my calendar with just a tap. Yet, lo and behold, I go onto the Apple site and I see this:
"Using Multi-Touch on iPhone makes the Calendar application intuitive and simple to use. Tap to create and send out meeting invites, accept or decline a meeting invitation, or dial a phone number from meeting notes."
What does this mean? Where? I regularly set up the phone numbers of people I need to call in Calendar and, so far, I can do this on any phone but can't figure out how to do this from the iPhone. Is this feature only available in "meeting notes?" Where is that? Is it visible on your calendar? If it isn't, who cares?

thelaw wrote:
"Using Multi-Touch on iPhone makes the Calendar application intuitive and simple to use. Tap to create and send out meeting invites, accept or decline a meeting invitation, or dial a phone number from meeting notes."...Is this feature only available in "meeting notes?"
Yes, only in the Notes. Meaning, if you or whoever organized the meeting enters a phone number in the Notes field, you can tap the number to dial it. The field is only present if notes were entered - for example, you can enter notes when creating a new event on the iPhone; for Outlook invitations sent via Exchange, text entered into the 'body' of the calendar event are Notes. It +does not+ work for numbers entered the location field (which is how most of my invites are, unfortunately).
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Similar Messages

  • How to move phones from one CUCM server to another?

    How easy is it to migrate IP phones from one CUCM server to another?
    The situation is this:
    A vessel currently sitting in dry dock has 14 IP phones onboard which currently register with a CUCM server half way round the world (literally). As you can imagine there is quite a fair amount of delay for the signal processing, not to mention the connectivity being over a VSAT link. This being a temporary solution.
    A CUCM server has been configured and installed on the vessel with all the relevant partitions, route patterns, trunks etc. The phones have also been added to the new server ready for migration. The only real thing that will be different when the phones are migrated is the Directory Number on each phone. Both CUCM servers are running software version 7.1.3
    The phones currently pick up their local IP addresses via a local DHCP server which assigns 150 TFTP Server IP Address for the remote CUCM server. Is changing the the TFTP Server IP address to the local CUCM server enough to have the phones register with the local server.
    This is not something I've tried before so would appreciate feedback or any comments that may indicate anything I missed along the way.
    Thanks,
    Ric

    Hi Ricardo,
    On the DHCP scope created for the voice vlan change the Option 150(TFTP Server IP address) to the new CUCM and remove/delete the remote CUCM IP address just to ensure that phones once after registering to the new CUCM will not fetch any config from the remote CUCM as the DN's of the phones are changed on the new CUCM please ensure this.
    Apart from this i dont see any challenges as the firmware of the IP Phones will also remain same as CUCM version is same.
    Hope that helps.
    Regards
    Najaf

  • How can I print from Calendar and only show days with events?

    There were several threads under iCal asking this question but never an answer. Basically, how can I print a list of selected events without getting all days with NO EVENT?
    In my case, what I want is in one Calendar - so I just want to print that one.
    Thanks!

    I see how to do this for a given month.  Sorry I thought incorrectly the solution above would work.
    Open the month you would like to priint.  Do "Edit > Select All" from Calendar's menu (or command-A, which does the same thing).
    Do File > Print > <Change view to Selected Events>.

  • Don't know how to stop phone from talking

    How do I disable the phone from talking ???

    I figured it out myself, please ignore my question.  Don't know how to cancel my question.

  • How to - Dial ext from AA, xfer to overhead page, play recording; then DirCallPark

    I have a customer who is replacing a Toshiba system with UCM-BE / Unity Connection.  Toshiba has the following functionality:
    External caller dials extension from AA, a pre-recorded annoucement is played on the overhead paging system, then caller is parked at a specific extension.
    Is there a way to duplicate this with Unity Connection (7.1.3)?  No problem transferring to a Directed Call Park number, but what about the additional step of dialing the paging DN and playing a recording?

    If I follow your scenario, this is not possible with CUCM/CUC.  You may be able to do something like this with UCCX but that may be a little overkill.
    Regards,
    Bill

  • How to dial phone number with extension using phoneCallTask ?

    Hi,
    Can we dial phone number with extension ?
    I mean suppose if there is auto answering machine where we need to dial some extension number after the beep, can we provide it with phoneCallTask.PhoneNumber
    property like we can do it in iphone ?
    Thanks & Regards,
    Anurag

    Hi Anurag:
    Unfortunately Window Phone doesnt provide the option to dial extension. But you can do it manually. After the call is made by clicking on Dial-er and manually inputting the extension.

  • How to stop phone from dialing other numbers while I am on the phone

    Hello everyone one out there!! I have had the iphone for over a month now and I am very happy with it so far. I was somewhat hesitate from buying after reading all the horror post that users have been leaving, but with anything I must try it out myself to make my own opinion. I am very impress with my purchase. The only problem that I am having is, when I am making a call and having conversation with someone my cheek will touch the touch screen and start either instant messaging someone or calling someone. Is there a way that after I dial a number I can turn off the touch screen so that my cheek will not interfer. Any advise?

    As has been mentioned, there is a proximity sensor which is supposed to inactivate the touch screen when it is up against your face.
    By any chance, are you using a case with your iPhone? Some cases may partially or completely block the proximity sensor and prevent it from working. Try removing your case and see if things start to work normally.
    If the problem persists, you may have a broken sensor and need to get it repaired by Apple.

  • HOW TO DELETE EVENTS FROM CALENDARS

    I use my iPod rarely and only for music.  I want to delete events, (birthdays, meetings etc.), from my iPod that were synced from my Outlook calendar.  The iPod is a 2009 model MB598ll version 1.0.4 PC.  How can I delete these events from the iPod.  Also, how do I avoid future syncing to my Outlook calendar?
    Thanks

    Look like you have duplicate calendars. Find the name of the calendar on your iPhone and the color of the event labels. Then look at your computer. Find the one with the different label/name/color. You can delete that calendar.

  • How to stop phone from storing surfed web images t...

    Whenever I visit any web page from my phone, it stores all the images in the page to my phone gallery ?
    How can I change this setting? 
    I am using 5800 xpress 
    Message Edited by pahup2002 on 30-Dec-2009 09:48 AM

    try going here:
    http://forums.adobe.com/message/5124955#5124955
    Basically all you need is to disable the autoplay.
    Or possibly just add a stop trigger to the begining of the timeline. I hope that helps.

  • How to deactivate phone from iCloud account

    I recently sold my old iPhone 4s and wiped it's contents prior to selling it.  The buyer just contacted me and said my iCloud account is still attached to the phone.  When I erased all of the data and settings, shouldn't that have removed my iCloud account from my phone?  How can I remove my iCloud account from this phone since it's no longer in my possession?
    Thanks!

    See the "If you no longer have your iOS device" section near the bottom of What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support

  • How can you print from Calendar on iPad ?

    Surely there is a way?

    Unjay wrote:
    Surely there is a way?
    Yes, but you need a third party app, believe it or not. Something like this.
    CalPrint on the App Store on iTunes
    the only built in option would be to take a screenshot of the calendar and print it from the photos app.

  • Does any one know how to unlock phone from landscape mode

    my iphone 4 for some reason locked its rotation from landscape to normal how can i fix this

    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • How to stop phone from announcing calls?

    I pretty much have the same opinion as others about the kitkat update.  NOT happy with it at all.  How do you get the phone to quit announcing calls?  I've gone to phone/settings/caller ID readout is set to 'ring only'.  HELP!  I AM FRUSTRATED!

        Hello bronaud!
    I'm sorry you're having issues with the Call announcement. Please make sure your device is not in driving mode, as this will announce calls as well.
    When it comes to your battery, here's a link to extend battery life for your device: http://vz.to/1nGqghy
    Thank you,
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • How to delete event from calendar

    I am trying to delete events from the calendar. 
    Thank you in advance

    Hello,
    Open Calender > Click on the event > Click on backspace key on your keyboard
    Cedric

  • TS3988 how to change phone from icloud?

    i am getting text from my other phone and would like to remove that phone no. from icloud

    http://support.apple.com/kb/PH12521

Maybe you are looking for

  • Conversion of string into XML object

    Hi I am having some problems with conversion of string (containing XML data) into Flex XML object and binding it later to UI elements to output/maintain this data. Binding of XML structure to UI elements works perfectly fine if I will do following: 1

  • Maintaining formats(layouts) on Crystal report with different database

    I was just needing some help maintaining the layout of a report but using a different database. The databases are very similar for example, a field for the database in use is line1xxxx what I wish to do is keep all the formating & point it line2xxxx

  • Validation widget don't work in regions?

    Is it true, Validation Widget don't work in regions? If I create a text validation widget, then wrap it in a region for xml data, the validation no longer functions for the widget. Is there something I'm missing here, or does it simply not work in th

  • Using searchlight to search the web

    Can "Searchilght" be used to seach anything else than the iPhone? Web? Wikipedia?

  • Applying validation checks and generating error

    Hi All, I am new to Informatica project . I have a client requirement of loading the source data to prestage table after removing header and footer (storing to separate table) , then load pre stage table to stage after validating few checks and after