How to disable an original statement without making repair via enchancement

Hello,
My problem is I want to change a Form in SAP original codes. I wrote my code in an enhancement at the end of the form. But the origianl form contains an "exit" statement. so my enchancement cannot be executed. As far as I know I can only insert an echancement to the beginning or end of a form. I cannot insert it at the begining becouse it would not work proper. How can I disable that "exit" statement to make my code accessible.
for example:
*Original code starts here:
-   statement A
-   statement B
-   statement C
-   if sy-subrc ne 0.
-       exit.
-   endif.
-   statement D
-   statement E
*My enchancement goes here:
-   statement F
-   statement G
-   statement H
what I want is: if sy-subrc is not equal 0 at that condition
continue execution from "F" statement.
One could say that move statement "D" and "E" to else block of the condition. but I am not allowed to make repairs to the original code.
thanks in advance.

Hi,
U can make 'EXIT' disable if it won't affect the other functionalty then
Write a OSS request to SAP clearly saying ur requirement and wat u want in the std code to make accessible ur code.

Similar Messages

How to add events into folders without making albums?

All my events created in iPhoto are exactly the way I want to organise my photos, but I hate the fact that I can't organise them into different folders without making an album out of the event. I don't want 'pointers' of photos in the album, I want the original file that I can delete forever as well. I have organised my photos in continents, like Oceania, Europe, South America etc... Into those folders I just want the events of the different countries, so when I click on a continent I can see the event view of those countries and not see all the 4000 photos at once of all the countries in that continent. I also like to go through events the way they are displayed in the event tab, but when the event becomes an album, they are shown differently.
I hope I explained it clearly... Is there a way to put just the events into folders and keep them as events?
On the picture above I want the albums 'Mt Warning', 'Bungyjump' etc, to be become events that contain the original photo files and not just pointers to the original photos. I also want the display of this folder 'Australia 2012 - 2014' to become the same display as when you click on the event tab (so you can see the different events in thumbnails). Is this possible?

And how can I delete photos permanently (in all of iPhoto as well as on my hard drive)?
Deleting Photos from an iPhoto Library
1 - from an Event or the Photos mode: select the photo(s) and use the Delete key to move the photos to the trash bin. Then empty the iPhoto Trash bin as follows:
2 - from an album, smart album, book, slideshow, card, etc.: select the photo(s) and use the key combination of Command+Option+Delete to move the photos to the trash bin. Then empty the trash bin as above.
NOTE: deleting a photo from an album, slideshow, book, etc., with only the Delete key only deletes that photo from that item. Deleting a photo from an Event deletes ALL occurences of that photo in the library.

How do we initialize DAL variables without making changes to INI files?

We have an application which currently use only two DALs. We would like to add a DAL to popluate certain data on the form. We have encountered an issue with initialization of dal vairables.
One of the solutionis that set FlushDalSymbo = Yes in the FSISYS file.
However, this involves INI file change which we would like to avoid.
So, is there a way to initialize dal variables, without making changes to INI files? If so, how?
Thanks,
Bala

Hi Bala,
Initializing a variable is simple, you just need to set the value to blank or zero:
Variable = ""
#Variable =0
$Variable = 0.00
You can place the declaration at the beginning of your script, of course replacing "Variable" with the actual name of you variable.
Gaétan

How can I export a Video without making it darker than the original file?

Hi there!
I'm working on a footage shot with the Canon 5D and since the first step in the post I exported the raw footage with Apple ProRes 422 (HQ) and worked with it in After Effects and later on FCP and then the usual Color and Compressor. But somehow every time I exported it, it got darker and darker... I tried using Animation codec instead of Apple ProRes 422 (HQ) and it didn't get dark but the files are HUGE and in the end I have to export the video in H.264 for internet. Does anybody out there have any idea what should I do and which compression should I use and how?
Thanks a lot!
Davi

When you say you exported the raw footage... are you working with native H.264s in FCP?

My computer locked-up, and when rebooted, my itunes library was gone, replaced with a brand new library. Fortunately, my 450 GB iTunes library is still on the computer. Question is how do restore my original library without having to reload folders? Tks

Help! My computer locked-up and had to be rebooted. However, when I restarted it and hooked up my iPod, I noticed my existing iTunes library (all 450 GB of it) was GONE and was replaced by a brand new library. Fortunately my old, 450 GB library is still on my hard drive under iTunes in Windows Explorer. How or why could this have happened, and most importantly how can I restore my old libary without having to manually import allow of my music and hundreds of Podcasts and 16000+ podcast files?
Thanks for any help....

What you're describing is the expected behaviour. I believe though that is also is the easiest way to have all the contents available to both of you at all times. If you have a spacious hard drive you should probably allow this to happen as anything else will be harder to manage.
My suggestion would be the following if you want to try something different.
Store all your music at a location that is accessible by both of you — an example would be to use your Public Folder as the locations where iTunes will go and look for all the media files—. Your wife does have access to it.
In the Finder you will need to move the folder name iTunes Music to the location in your Public Folder (see above). Once that's done, you and your wife will have to go into the iTunes Preferences > Advance Preferences and un-check Copy files to iTunes Media folder when adding to library. From this point on, you can continue to use iTunes as usual. You'll need to tell your wife what has been newly downloaded/imported into your iTunes so she can manually go look for those items in that Public Folder iTunes of yours and import them into her iTunes. She will not duplicate by doing that, but, like I say this is an all-manual work.
She can do the same, so you have access to contents she imported herself. One more downside of this is that both usernames have to be active in your iMac. If yours isn't, she won't be able to access any item (song, book, app) located in your Public Folder's iTunes.
I'm sure there's a way, if you have an router with external hard drive conectivity, for both of you to be able to access —independently— the iTunes Media at all times but I was just reading at another post that doing so can further complicate things.
Hope this helps. Please let me know what you think or decide to do.
Jorge...

How to disable one F key without disabling the rest

OK, this is the situation:
I don't want to disable all the keys because i use them often.
I've already tried FunctionFlip, but it doesn't seem to work in Final Cut Pro (and the reason I need to disable one of the keys is primarily because I need it for a FCP shortcut)
is there another way to disable only one key?
OR - If I were to disable all F keys, how do I reassign some of them back to their default mac function? does anyone know the names of the menu commands for Volume up and down and for mute?
Thank you so much!

To use the F keys as assigned in FCP....

My mom and I share an itunes account,and when somebody iMessaged me, she received the message. I made her another account, signed iCloud into that account but her phone keeps on getting my notifications. How do i turn it off without making a new account?

please help

1) You asked "Does she need to reconnect to that itunes/computer and if so what do we need to do to remove this folder of pics from her ipod?" Yes, you have to connect the iPod to that computer and go to the Photos pane for the iPod in iTunes and uncheck sync photos and the click on synce/apply. In the future do not check sync photos.
iOS and iPod: Syncing photos using iTunes
2)
Create a NEW account for using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Then on the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into hers. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into hers. Make sure that under You can be reached at only her ID email address is listed
- Settings>iCloud and sign out and sign in with hers
Contnue to use the commpn ID/account for Settings>iTunes and App stores.

How to synch multiple ios devices without making multiple copies on Mac

I keep most content on Mac Mini. Prior to Christmas, we were using about 200 GB of the 750 GB hard drive on the Mac Mini.
At Christmas, we added 5 iPads for the family. We synch each iPad to a shared iTunes library on the Mac Mini. Suddenly, the entire 750 GB of hard drive on the Mac Mini is FULL. I strongly suspect that the reason is that when we synch (or backup) all 5 iPads, multiple copies of the exact same content (mostly movies) are getting created on the Mac Mini.
How do I configure the Mac Mini, iPads, or synch within iTunes to NOT make duplicate copies of content? For example, if each IPad has movie "ABC" synched to it, we don't then want the Mac Mini to have 5 copies of movie "ABC".
Thank you.

Yes. The serial parameters cluster that contains the slave address is something you will just programmatically change as needed as opposed to using a front panel control.
By the way, you don't need to have 30 copies of the index array. Create one copy. Expand the bottom downwards. It looks like you start at #16, so just wire a 16 at the top, the ones below it will be successively 17, 18, 19..... If you need to jump to another number, then just wire a constant in for that one.
You also have some awkward datatype conversion to the dynamic datatype. This is going to cause you problems somewhere down the line. If you want an array from 3 scalars, just use Build Array!
Attachments:
ElectrexFemtoD4_LabVIEW_v4[1]_BD.png ‏202 KB

How do I add a narration without making my files huge?

I've just prepared a Keynotes presentation, with is about 700KB without narration. I've added narration using the 'record slideshow' function. It is 22 minutes long with simple voiceover. The filesize leaps to 350MB - is there a way I can add a narration and keep my filesize reasonable? Say, under 100MB, which is the SlideShare maximum.

+Menu > Share > Export… > QuickTime > Formats: Web Movie, Small > Audio: Include audio+
Open the resultant QuickTime movie in QuickTime.
+Menu > File > Export… > Export: Sound to AIFF+
Open the resultant yourname.aif file in iTunes
+Menu > Preferences > General > Import Settings… (button 2/3rds down) > Import Using… AAC Encoder > Setting: Spoken Podcast > OK > OK+
This will set the encoding for the next step with the Audio selected:
+Menu > Advanced > Create AAC Version+
iTunes will the proceed to convert the Audio to a much smaller .aac copy. My small sample went from 5mb down to 144kb with no audible change in quality. To locate where that file is being stored, select the .aac copy and hit cmd R, it will be revealed to you in the Finder.
Go back into Keynote:
+Menu > View > Show Media Browser > Audio > Type the name of the audio file in the bottom field > It is the one with the .m4a extension+
Ideally you will chop this audio file into one piece for every slide using 3rd party software such as *MP3 Trimmer* or Fission and add each piece to each slide.

How to get a fractional Number without making round figure

Hi,
i am using below code for saving a fractional number.
actually when i enter 23.658 and save it , then it get save in round figure as 23.66. while i want to get it save as 23.65.
please let me know how can i achieve this.
<af:inputText value="#{pageFlowScope.managedBean.pointVar1}">
<f:convertNumber maxFractionDigits="2" minFractionDigits="2" />
</af:inputText>
Thanks,

Hi,
Can you remove this maxFractionDigits="2" minFractionDigits="2" and give pattern as "#0.00" and try?
Thanks

I forgot my security questions and I can't download any apps. How can I fix the questions without making another account?

I forgot my security questions. I been using the same Apple ID sense 2013. And I already forgot what the security questions were, and now I can't download a 99¢ game. Can I make new security questions without deleting my Apple ID?

Go to the country site from http://support.apple.com/kb/HT5699 or call the country support number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team.

How can I delete my account without making a phone call?

As above.I created an account only to redeem a voucher which was for a TV edisoe, because the voucher was bought in the US I cannot redeem it. Created the account simply to watch the prog but now I can't I am not comfortable having a credit card details on Apples data base.. Can't seem to find an email address to contact suppport. Only a lo call 0844 number. Any or help advice appreciated. Thanks

I have already tried ths mate...You cant do this.It wont give you the option to save unless there are details in the fields I have tried and they now want me to ring a number in the uk 0844 which means the cost of cancellation is passed into me.

How to disable the 'Change - Display' Button in Cluster via SM34 ?

Hi
I have a View Cluster maintained with a transaction wich calls SM34 passing it the Cluster.
I need the dialog be only in display mode, so i'm looking for a way to disable the button Change<->Display.
Does somebody knows how can i do this ? maybe with an event, the button does not appears or well making the button does not change the display mode (does not change the field VIEW_ACTION siwtch from 'S' to 'U')
Thanks in advanced
Frank

Hi Frank,
On SAP 4.7 Version
1). Goto SHD0
2). Enter the transaction code as SM34
3). ENter the transaction Variant as say ZSM34
4). Click on the create button --> this will take you to the sm34 screen. If you want to default some value or disable something on this screen just hit enter on this screen. You will get a popup window to select and restrict.
5). You can further go to next screen and deactivate the menu. On the popup screen you will get a button MENU FUNCTIONS.
Hope this helps
Cheers
VJ

How to disable a user account and issue CoA via REST? (ACS 5.4)

Like the subject line says, I need to disable user accounts via REST, as well as issue CoA doing the same. Is this even possible? I've been trying for a few days now and I can do GET queries on user accounts, but I can't get anything to work using PUT.

According to this document it should be possible to use the PUT method.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/sdk/rest.html
Could you please tell us how are you using the PUT method? I could try to replicate it in my lab.
Best regards

How to disable touch screen for touchsmart 610

HP TouchSmart 610
Windows 7 64-bit
I need to touch the screen without causing stuff to move.

Not sure what you ? is since your subjet says : how to disable then your statement in the body of the form says " touch the screen without causing stuff to move" so confused.
What I suggest is pick your model here from the Model 610 page and look for what your asking within that page on your system.
http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&dlc=en&lc=en&tool=&query=touchsmart+610#N194
Hope it helps

How to disable an original statement without making repair via enchancement

Similar Messages

Maybe you are looking for