How to disable Oracle RAC configuration.
Hi,
I have a system running on a RAC configuration (two machines and a shared SAN) I have been looking extensively for any documentation on how to dismantle (safely, i.e. best practise) the rac configuration.
I don't want to loose the database and want to keep one of the instance running and servicing the database, but I want to remove all RAC/Cluster references and remove the other machine.
Is there any note/ documentation anywhere on how to do that so that the database/instance will be running afterwards with no knowledge on having been in a RAC config before or has someone done that ?
Thor Hjalmar.
Want to know how can I convert a rac database to a non-rac.
Similar Messages
-
How to backup oracle RAC filesystem
Hello,
May anyone in this community might help to answer on my inquiry on how to backup oracle RAC filesystem. There are many backup features available out there i.e: RMAN, hotbackup etc but the way the backup is working is RMAN will backup and stored the db file in the filesystem. I presume the filesystem also need to be backed up in order to avoid the filesystem corrupted etc
RegardsHi,
Always welcome ..
when you want to take backup of all the database components of RAC, that's why i advised you to include the all commands in your backup strategy, so that in any case your any components doesn't work , you can restore the particular one .
One thing you can do , you are running your RAC environment on Vsphere , in that case , create a backup plan with the client and your IT team to take backup of whole environment by creating snapshot of Vsphere along with backup plan mentioned by me in above reply , so in worst scenario your whole environment can be restored .
I have seen that if RAC environment is running on VMware , then its best to take snapshot of whole machine which should be defined in backup policy apart from normal backup of database.
Thanks
Shivendra Narain Nirala -
How to install oracle rac on linux using virtualbox
Hi,
I have recently started working on oracle rac
I have system with 64 bit os windows 7 installed
core i3 processor with 6 gb of ram
I want to install grid infrastructure on linux running as a virtual machine
how can I install and configure it? Please help me .
can ubuntu work as a virtual machine for oracle rac?Hi,
I suggest you use Oracle Enterprise Linux on your lab. There are a lot of step-by-step guide to install RAC on OEL. A good example is by Tim Hall, search Google for "Tim Hall Oracle Database RAC Installation". -
Configure Oracle DB Adapter in Oracle RAC configuration
Oracle RAC uses Service name rather than SID and Oracle adpater only accepts a URL string in sid format. How can a connection be defined for a RAC environment?
Thank you. The solution for configuring a Tidal adapter that uses Oracle RAC is to expand the URL connection string where the Service name can be defined.
Standard defined connection string:
jdbc:oracle:thin:@hostname:1521:sid
Connection string for Oracle RAC:
jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=servicename))) -
Disable oracle connector configuration wizard.
I m using outlook connector 9.2 with MS outlook, and when i create ny profile from outlook client every thing is ok. but when i tested outlook connector 10.1.2 doesn't want to create profile from outlook client, i ask me to use the oracle connector configuration wizard.
There any way to disable the oracle connector configuration wizard ?
thanksHi,
Firstly, please check whether you PC meets the client requirements:
Get Connected in Windows Server Essentials
Did you mean that after you typed “http://<ServerName>/connect”, and dowload the software, then there was no User Account Control message appears,right? Did you click Run in the file download security warning message?
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How to install Oracle RAC using 11gR2 on Win 7 32 bit from scratch?
Hiii,
I am a fresher and I have a win 7 system 32 bit with oracle 11gR2.
I want to install RAC using two or more servers but I dont know too much about it.
I tried to search on google but all they are giving information in pieces(for win 7) or about Linux(Please tell me why its all Linux everywhere not windows).
Please let me know if there any site where I can find step by step installation from scratch.
What are basic requirements(/software if needed).
Thank you.Hi,
First of all forget about Windows!! Oracle is mainly designed for Linux systems. Oracle runs as real multi-process on Linux machines whereas on Windows it runs as a single process with multi-thread.
Memory usage - huge pages,single CPU run queue, dnfs, storage systems... etc. lots of concepts exists.
Besides Windows is one of the most poorly designed operating systems, you should use it only to watch cute kitten movies on youtube... Believe me, you wouldn't want to learn Oracle on Windows...
So, install virtualbox and then setup Oracle Enterprise Linux on it as a first step... By the way you have to deal with DNS server for release 11.X, RAC, you may start with 10g for now.
ORACLE-BASE has all the installation steps explained detailly, search for "oracle base rac install" on google.
I also explained on my blog, but it is a little bit advanced installation using ZFS storage simulator. DNS server installation is also explained: http://ilkertaysi.com/2013/11/11/oracle-rac-installation-with-zfs-storage/ -
How to install oracle RAC 11g on oracle linux 5 using vmware workstation ?
Hello;
I need to Install Oracle RAC 11g R2 with database 11g ( 2 nodes ) but by using vmware workstation ( not server 2) on oracle linux 5-6 .
So any document can help me please ..
regards.http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-ol5-using-vmware-server-2.php
http://appsdbaworkshop.blogspot.in/2011/10/11gr2-rac-on-linux-56-using-vmware.html
http://robertgfreeman.blogspot.in/2009/12/11gr2-rac-on-vmware-part-one.html -
How connect to oracle RAC via the RSG using port forwarding
Hi all,
I got a problem trying to connect to oracle RAC via the RSG using port forwarding .
on command line i sue to connect :
sqlplus 'username/password@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=firstRACnode)(PORT=1521))(ADDRESS=(PROTOCOL=tcp)(HOST=secondRACnode)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=MSDP)))'
but when using port forwarding i forward the port 1521 to a local port and make ssh to the DB node ( as normal with other nodes but not RAC) but it never work with me for this situation
can any one give me a help ifthere is any changes should be done on the server side , or if any one faced such a problem and found a solution
Thanks,
Prathap.782011 wrote:
I got a problem trying to connect to oracle RAC via the RSG using port forwarding .
on command line i sue to connect :
sqlplus 'username/password@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=firstRACnode)(PORT=1521))(ADDRESS=(PROTOCOL=tcp)(HOST=secondRACnode)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=MSDP)))'Not exactly sure what you are attempting, but if you doing port forwarding via ssh, the basic approach is as follows:
Step 1
Create a ssh tunnel from local machine to remote db server. Forward any local port (should not be a well known port or a port in the private/dynamic port range) to connect to the database server's listener port. If the ssh tunnel is into the db server itself, the connection (port forwarding) can be on localhost (as the Listener should be listening on it). Alternatively use a public IP of that db server.
Example (using OpenSSH on Ubuntu 9.4):
Local server port 1527 tunneled to port 1521 on database server 192.168.0.100 using o/s account johnd (we connect to port 1521 on db server via 127.0.0.1):
ssh -X -f -N -o ServerAliveInterval=3 -L 1527:127.0.0.1:1521 [email protected]
Step 2
Run sqlplus and connect to the local fowarded port on localhost, using the applicable connection settings (e.g SID/Service Name, etc).
sqlplus scott/tiger@"(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1527)) (CONNECT_DATA=(SID=orcl) (SERVER=dedicated)))"Note that the Listener must not hand our connection off - as the case would be when using RAC for example and connecting via a Service Name and not a SID. We need the Listener that accepts our connection to immediately hand us over to the database instance (via either a dedicated server or a shared server dispatcher process). -
Unable to make SSH to another node in AIX for Oracle RAC Configuration
Hi,
After creating RSA Keys on both node when I try to scp authorized_keys file from one node to another, it give me the error of Connection lost and then connection closed by 'Machine Address'. SSH services are running on both node and I'm able to do ssh from root user but this happened with Oracle OS user account. This seems that sencond machine refuse to make connection. Kindly help me why is this happening.
I'm doing this on AIX 5.3. Your help will highly be appreciated.
Regards,
AbbasiSchavali, you are right this question is acutally has nothing to do with Oracle but the thing is that this issue arises during the configuration of RAC and we are unable to find the reason yet. I think there is problem with key genration however, I'll try to do this. by configuring sshd_config file and then will share the result.
Regards,
Abbasi -
How to disable Oracle table NUMBER column type auto round-up
Below is an example,
SQL> create table a
a_col1 NUMBER(8, 2)
SQL> update a set a_col1=1.999 where ...
I found column 'a_col1' of table 'a' value will be 2.00, but the application is for some financial calculation and doesn't allow any difference of the amount value (like, 1.999 <> 2.00), what I want to achieve is to disable the Oracle NUMBER type auto round-up and make above 'update' SQL fail with error, so I can trap the error and handle it in the program.
Could anyone advise me how to achieve above or any good suggestion ? Thanks.user12317666 wrote:
Below is an example,
SQL> create table a
a_col1 NUMBER(8, 2)
SQL> update a set a_col1=1.999 where ...
I found column 'a_col1' of table 'a' value will be 2.00, but the application is for some financial calculation and doesn't allow any difference of the amount value (like, 1.999 <> 2.00), what I want to achieve is to disable the Oracle NUMBER type auto round-up and make above 'update' SQL fail with error, so I can trap the error and handle it in the program.
Could anyone advise me how to achieve above or any good suggestion ? Thanks.Oracle does not auto-round.
you have data presentation problem; not data storage problem. -
How to disable log4j via configuration file
Howdy,
I am using the quartz library which uses log4j, how can I disable log4j in my release version? where can I find a sample configuration file to disable log4j?
TBH i am not sure if its actually running as i am not pointing it to config, i get these warnings:
log4j:WARN No appenders could be found for logger (org.quartz.simpl.SimpleThreadPool).
log4j:WARN Please initialize the log4j system properly.
But I would prefer to just disable it all together (or initialize it correctly and make it do nothing)...so I am looking for how I can accomplish this. I've read over the docs here:
http://logging.apache.org/log4j/1.2/manual.html
They are a bit long winded for what I need to do so I might have missed it, but i am just looking for how to structure a minimal con fig file to properly initialize log4j and prevent it from logging anythingtiburblium wrote:
Now quick question, how can I modify this to prevent logging from occuring? It seems as if I set log4j.debug=FALSE nothing is logged, is that all thats required? set rootLogger to OFF if you intend to turn off logging, something like this.
log4j.rootLogger=OFF, R
Also how can i specify a null appender? I dont want log4j to attempt to log to a file on an end users systemlog file is not created on the end users system. It is created in the app server where the application is running. Setting rootLogger to OFF should take care of your problem as nothing will be logged. -
Re: How to install Oracle RAC using 11gR2 on Win 7 32 bit from scratch?
Hi,
I'd suggest to use the Virtual box(Free download from Oracle) and use the steps mentioned in the link.. for RAC Setup for your practice
http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-oel5-using-virtualbox.php
HTHThank you DK2010,
Your answer was very helpful to me but please tell me why everybody suggest about virtual box? Is is very important? and what is the benefit?
And I was checking that testing that branch option thats why this post become branch of my discussion. -
How to disable microphones and configure WLAN on Satellite A210-11b?
Hello
I have notebook with microphone and I dont know how to SHUT OFF him ... and if somebody want help me can u say how to configure WLAN in this notebook because I cant configure it properly.
At first please help me with this microphone in my notebook becuse I want put in output channel. Please help me. I cant speak on TEAM SPEAK 2.Hi mate,
I suppose that you have Windows Vista installed. If thats right then go to Control Panel -> Hardware and Sound -> Recording -> choose either "FrontlineIn" or "Frontmic" (which is available in this moment) and dont forget to connect your headset before.
Regarding WLAN, you should check this article: http://helpdesk.uafortsmith.edu/Guides/VistaWirelessSetup
Greets -
VBscript - how to Disable "Use Automatic configuration Script"
Hi There
I currently have the below script in a vbs file;
Const HKEY_CURRENT_USER = &H80000001
Set objShell = CreateObject("WScript.Shell")
strPC = objShell.ExpandEnvironmentStrings("%COMPUTERNAME%")
On Error Resume Next
Set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
strKeyPath = "Software\Microsoft\Windows\CurrentVersion\Internet Settings"
strValueName = "ProxyEnable"
objReg.GetDWORDValue HKEY_CURRENT_USER,strKeyPath,strValueName,dwValue
'#==============================================================================
'# If
IE Proxy is currently enabled display message and ask user whether it
'# should
then be disabled
'#==============================================================================
If dwValue = 1 Then
IEPrompt = MsgBox ("Hello David. Your Proxy is on, Do you want to turn it off?", vbQuestion+vbYesNo, "Disable IE Proxy")
If IEPrompt = vbYes Then
dwValue = 0
objReg.SetDWORDValue HKEY_CURRENT_USER,strKeyPath,strValueName,dwValue
MsgBox "Thank You David, your proxy is now off. Have a nice day" & _
".",vbInformation, "Disable IE Proxy"
ElseIf IEPrompt = vbNo Then
MsgBox "David, your Proxy is still on " & _
".",vbInformation, "Disable IE Proxy"
End If
'#==============================================================================
'# If
IE Proxy is currently disabled display message and ask user whether it
'# should
then be enabled
'#==============================================================================
ElseIf dwValue = 0 Then
IEPrompt = MsgBox ("Hello David. Your Proxy is off, Do you want to turn it on?", vbQuestion+vbYesNo, "Enable IE Proxy")
If IEPrompt = vbYes Then
dwValue = 1
objReg.SetDWORDValue HKEY_CURRENT_USER,strKeyPath,strValueName,dwValue
MsgBox "Thank You David, your proxy is now on. Have a wonderful day" & _
".",vbInformation, "Enable IE Proxy"
ElseIf IEPrompt = vbNo Then
MsgBox "David, your Proxy is still on" & _
".",vbInformation, "Enable IE Proxy"
End If
End If
This only turns off the proxy server in IE/Tools/Internet Options/Connections/Lan Settings.
Can I get this same code to turn of the 'Automatic configuration' check boxes instead or as well?
Many thanks
LukeHi Luke,
We hope your issue has been resolved
The registry for use automatic configuration script is under HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\AutoConfigURL
(For per user) It shows when script is set to work.
Regarding to question about scripting or VB script, I’d suggest that post your issue at TechNet scripting Forum and MSND forum. There you can get more effective suggestion by other experts who familiar with scripting. Your understanding is highly appreciated.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral
And just for your reference, we do have a Group Policy for that, link it to a scope (Site, Domain, or OU level) which contain user account object.
For more information please refer to following MS article:
Configure a Registry Item
https://technet.microsoft.com/en-us/library/cc753092.aspx
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
How to disable Oracle Reports showjobs listing?
Hello all,
I need to disable the report server showjob listing of executed reports, with OAS 10.1.2.
With OAS 9.0.4 I could specify maxqueuesize parameter at 0, so no report would be listed in showjobs page.
In OAS 10.1.2 the minimum value is 1, so the last report executed is still listed.
Thank you.
Bye,
AndreaI found a solution, by setting DIAGNOSTICS=NO in rwservlet.properties file.
Thank you.
Bye,
Andrea
Maybe you are looking for
-
When I try to buy either an app or a song via iTunes, I have just started getting the following message and I am unable to change the store location. "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to
-
Creation of Virtual Directory in weblogic.xml (OBIEE11 Weblogic)
We are using OBIEE 11.1.1.6.4, we want to create a Virtual directory mapping in weblogic server so that we can place our static image files to access from the application URL. To do this activity, we have performed following steps - 1) Navigated to C
-
Digitally signed documents causing Acrobat 9.3.1 to crash
Multiple users at my office are experiencing problems with digitally-signed PDFs. As soon as anyone tries to open the PDFs that have been signed, Acrobat crashes. We're using Acrobat 9.3.1 (32-bit) on 64-bit Windows 7. Reinstalling Acrobat has not
-
How can I print my purchase history or get an invoice emailed again I deleted by mistake
How can I get an invoice emailed again or print it via purchase history
-
Kotoeri (japanese input system) does not allow input
I've been using Kotoeri to type in Japanese and it's been working just fine until recently. Now when I select Kotoeri and tried to type, the cursor disappears and what I type does not appear on the screen. If I type ten letters, one or two of those l