How to disable server name indication

I want to turn off SNI (server name indication) but I didn't find the right option. I could only disable TLS and use SSL to achieve this. I set the value of "security.tls.version.max" to 0.
I am looking for a way to have TLS while disabling server name indication extension.

Under Tools → Options → Advanced → Encryption, make sure you have "Use TLS 1.0" enabled. This is off by default in older versions of Firefox.

Similar Messages

  • Does Safari on iPad support SNI (Server Name Indication)

    Hi,
    I am testing name-based virtual host with apache 2.2 over SSL and noticed that this is only supported using SNI (server name indication). I have updated openSSL to include the SNI extensions on the apache but the client browser is also required to support this. I wanted to know if there is any indication as to when SNI will be supported by the Safari browser on iPad and/or if anyone else has experienced this issue.
    I know of 1 additional work around is to use wildcard certs but I am not to keen on using those unless I really have to.
    I verified that this is not support by hitting the site: https://sni.volex.ch from the iPad safari browser - it fails. However, using Opera on iPad worked.
    Thanks

    From what I understand SNI is largely reliant on client support. It is just an extension of the TLS SSL protocol. One of our Escalation Engineers wrote up a pretty good post explaining SNI.
    http://blogs.technet.com/b/applicationproxyblog/archive/2014/06/19/how-to-support-non-sni-capable-clients-with-web-application-proxy-and-ad-fs-2012-r2.aspx
    "SNI is an extension to the TLS SSL protocol that allows the client to include the Hostname the client is connecting to in the SSL Client Hello. A server can then use the SNI header to determine which certificate to serve to the client. A key benefit
    of SNI is that is allows a server to host multiple certificates on the same IP/port pair instead of needing an IP per certificate (assuming you are using port 443)."
    A few questions I would have is what client and browser combination have you attempted on this? Also, are you using a wildcard certificate on your Web Listener? Have you taken network traces to see if client is sending SNI? Ian does a good job of explaining
    how to do that in his blog post.

  • How to get server name and port of OSB server in a proxy service ?

    I need to get the server name and port of the OSB server inside a proxy service. How can I get this?

    You may use java callout for this purpose -
    How to get ServerName and ApplicationName in OSB (ALSB) ?
    Regards,
    Anuj

  • How to get Server Name and port. Urgent.....

    Hi,
    Please let me know how can i get the server name and port without using request object.
    I am getting it :- request.getServerName();
    But, pl. let me know how can I get it without using this request object.
    Waiting for reply..

    I don't know of any way to trivially access that, but why do you need to do this? If you need access to that information in a method that can't see your HttpServletRequest, then perhaps your architecture has a flaw, and you'll be better off in the long run restructuring it.

  • How to disable datamodel name of bipublisher report

    Hi all,
    I have a bipublisher report which i want to put it in dashborad. After putting the report i am getting extra border line and name the data model. How can i remove it from dashboard ?
    thanks in advance ..

    Hello,
    some ideas :
    - give the Reports Server name as a Forms parameter
    - create an environment (registry on Windows) variable containing the Reports Server Name and read it with TOOL_ENV.GETVAR
    Regards

  • How to change server name from RAS?

    Wshes to All,
    I have designed a report with local server and uploaded into RAS .
    Now i have to change the server name in the RAS itself without touching the report.
    How to achieve this.
    Kindly solve my problem.
    Thanks in advance.
    Saravanakumar

    Hi ,
    Since i cannot figure out what to give in the third parameter in replaceConnection() ,
    I am using SetTableLocation(oldTable,NewTable);
    For that i am setting the following Properties,
            propertyBag.put("Trusted_Connection","False");
            propertyBag.put("Server Type", "JDBC (JNDI)");
            propertyBag.put("Use JDBC","true");
            propertyBag.put("Database DLL","crdb_jdbc.dll");
            //propertyBag.put("JNDIOptionalName",JNDIName);
            propertyBag.put("Connection URL","jdbc:oracle:thin:@xxxxxxxx:xxx");
            propertyBag.put("Database Class Name","oracle.jdbc.driver.OracleDriver");
    But still i cannot establish the connection.
    Is Connection String also required.
    If so how to give the Value for that.
    Thanks,
    Saravanakumar.

  • How to disable "untagged" name on thumbnails?

    Hi I want to disable untagged name on thumbnails how can I do that this realy distraction to read real folder name...

    You can turn on and off extra lines of metadata in edit/preferences/thumbnails.

  • How to Retrieve Server Name for creating connection pool during startup!

    Hi All,
    I am going thru the edocs documentation of weblogic for creating the connection pool and the datasource dynamically. The URL I referred to was as under
    http://edocs.bea.com/wls/docs81/jdbc/programming.html
    There is a sample given in the above-mentioned URL. The Server MBean is created by passing the server name.
    The code below mentioned was have placed in my dblib.java
    svrAdminMBean = (ServerMBean)adminMBeanHome.getAdminMBean("myserver", "Server");
    I am creating the connection pool from the servlet by invoking the dblib.java
    I cannot hard-code the server name in the dblib.java since the same code was shared across multiple servlets.
    Each Servlet will create its own connection pool during application server startup.
    Is there a way to retrieve the server name in which the dblib.java is invoked.
    Any pointers to info source will be REALLY appreciated.
    Many Thanks in Advance,
    C R Baradwaj

    You can get it from the Java system property weblogic.Name, i.e. System.getProperty("weblogic.Name");
    Cheers
    Feargal

  • How to change Server Name on BPC Connection Wizard in Mass

    Hi there,
    I need to know if there's a way to change Server Name in Connection Wizard on a large number of PCs, using a configuration file that can be deployed to the PCs that need the change.
    Thanks for your response.
    Cheers,
    Rodrigo

    Apparently the Server name is stored under:
    HKEY_LOCAL_USER\Software\VB and VBA Program Settings\Outlooksoft
    5\LATEST for each user who uses BPC under the data containing "SERVER"
    So this is going to help on this requirement, previous a registry backup.
    Cheers,
    Rodrigo

  • ACE - Support for SSL Server Name Indication (SNI)

    Hi,
    I have the question if Cisco ACE currently or in the future supports SSL SNI (RFC 3546 or 4366). You run into that problem when moving SSL termination from a server that supports having multiple different certificates bound to the same IP and acting on the different domain names (SNI). Currently I do not see any chance how to build that on the ACE. In case it is definitely not supported, is there anything on the roadmap for that?
    Thanks and best regards,
    Daniel

    From what I understand SNI is largely reliant on client support. It is just an extension of the TLS SSL protocol. One of our Escalation Engineers wrote up a pretty good post explaining SNI.
    http://blogs.technet.com/b/applicationproxyblog/archive/2014/06/19/how-to-support-non-sni-capable-clients-with-web-application-proxy-and-ad-fs-2012-r2.aspx
    "SNI is an extension to the TLS SSL protocol that allows the client to include the Hostname the client is connecting to in the SSL Client Hello. A server can then use the SNI header to determine which certificate to serve to the client. A key benefit
    of SNI is that is allows a server to host multiple certificates on the same IP/port pair instead of needing an IP per certificate (assuming you are using port 443)."
    A few questions I would have is what client and browser combination have you attempted on this? Also, are you using a wildcard certificate on your Web Listener? Have you taken network traces to see if client is sending SNI? Ian does a good job of explaining
    how to do that in his blog post.

  • How to disable server properties DEMOTION on Word document.

    Hi everyone.
    For business requirements, we must work with custom Word document properties, instead of the server ones. The first promotion of these document properties to fields in the SharePoint library is very useful, but when the document is downloaded to launch a
    new version, we want to avoid the server properties demotion, because when we upload this new Word document version, SharePoint promotes the "old" server properties, instead of the new document properties from the new version.
    How can avoid this demotion of the server properties?
    Thanks in advance.
    Fernando.

    Hi,
    Here are two articles below would be helpful:
    Document Property Promotion and Demotion Overview and Considerations
    http://blogs.technet.com/b/wbaer/archive/2014/08/29/document-property-promotion-and-demotion-overview-and-considerations.aspx
    How to Enable or Disable Document Property Promotion in SharePoint 2013
    http://www.c-sharpcorner.com/UploadFile/anavijai/how-to-enable-or-disable-document-property-promotion-in-shar/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How to disable server autodiscov​er Article kb35215

    In reference to the problem in article kb35215. Is there anyway to disable this autodiscover feature? To me this seems silly that the OS automatically decides to change my server settings by using auto discover. It will always find the wrong server due to the way our network is setup.
    In my view this is a bug. I configure my email to use the correct server. And if the OS automatically decides to choose a difference one then in my view its a bug. Myself and my coworkers will be forced to get rid of your Q10's if this isn't changed on 10.3. We have to check are settings everyday to make sure they haven't changed. 
    Please help

    Thanks for your reply A!
    It seems one can customize ports, certificates, IP binding etc for the web service hosting sites,
    but for the Wiki? nothing...
    I played around with some apache config files too, but I can't seem to get rid of port 443 if I want to use the Wiki...
    I can't seem to bind the Wiki/Apache to a specific IP either.
    I can't seem to change the 443 port used by the Kerio Connect mail server because it will freakout iOS when configuring accounts, so thats not an option either...
    As a work-around I'm doing the following after evert restart (not very viable for a server):
    Manually turn off the Wiki service, now port 443 is availble for Kerio's HTTPS service, so I manually start it,
    then start the Wiki service again, and since port 443 is now taken by Kerio the wiki will use port 80 only!
    So it looks like my options are:
    - Find a way to bind the Wiki to a specific IP.
    - Find a way to change or turn off port 443 for the Wiki service.
    - Run Kerio Connect mail server as a VM in Fusion.
    - Run Kerio Connect on a different machine on OSX Client.
    - Use the Apple Mail service.

  • How to change server name in adobe x download

    when i downloaded adobe x i entered the wrong email account an server, not knowing what they meant.  now, when i try to attach pdf to email and send this error shows up as the reason.

    Sorry, I don't understand what you are doing.  Downloading Adobe Reader does not require an email address or Adobe ID.
    I also don't understand "this error"; please provide more information.

  • How to get server name and/or IP address from client (10g)?

    Thanks.

    SELECT SYS_CONTEXT( 'USERENV', 'IP_ADDRESS' ) FROM dual;
    SELECT SYS_CONTEXT( 'USERENV', 'HOST' ) FROM dual;assuming you have a two-tier system (i.e. the client is actually making the connection to the database). If you have a three-tiered system, the middle tier would have to pass in this information.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • How to disable Outlook for checking for IMAP/POP3 Certificate Name Mismatch?

    I have outlook clients that are connected to an IMAP/POP3 server that's off-site provided by company A.
    Company A requires me to enter imap.companya.com for imap server address and 993 for the port.
    I must also enable SSL for the connection.
    When I do this, Outlook pops up an error message (shown below), that must be reacted to every time it checks for mail.
    The reason is that the certificate is for myserver.companya123.com and that's different than imap.companya.com but company A wont change it. They said I need to disable my email programs certificate check so it doesn't keep prompting
    me. Now I can do this with my iphone, and other email programs without incident. But I cannot find where to disable it in outlook.
    If I change the imap server address in my account settings for outlook to instead use myserver.company a123.com, outlook can't connect and as the vendor said I must use imap.companya.com as the imap server address.
    I need to be able to connect via SSL (so nobody can swipe my password over the wire) but not have to react 1000x a day to the certificate warnings.
    I don't want to use Eudora, or another email client that allows me to easily disable the warning. I want to use outlook. How do I set outlook so it doesn't keep popping up these certificate server name mismatch warnings?
    I spent days searching for a fix, and it seems there are fixes via the registry for just about every type of certificate issue, but NOT THIS PARTICULAR ONE.
    I am hoping someone knows exactly what I am talking about and knows of a easy fix. I must use SSL so please don't tell me to disable SSL.
    What I need is to disable outlook from presenting that alert. That's what I need to do. No other solution will suffice. I hope outlook does not have a product limitation that prevents such a thing from being done. I am ok with a registry fix if need be, but
    being able to disable outlook from presenting certificate name mismatch alerts is critical. Hope its possible! Thanks!

    Hi,
    I would suggest we try the registry key mentioned in this
    article (Method 4) to configure Outlook to allow the connection to the mismatched domain name, and see if it works:
    HKEY_CURRENT_USER\Software\Microsoft\Office\<var>xx</var>.0\Outlook\AutoDiscover\RedirectServers
    Let me know if this doesn't work.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

Maybe you are looking for