How to disable the alphabetical order in lists in 8.5

I have just installed LabView 8.5.
I found that the lists of controls and globals are now ordered alphabetically in drop down boxes.
I was using the tabing order to regroup items corresponding to the same functions.
Is there an option to changed the order back to what it was before?
Cheers
Etienne

Hi there,
This was an intended feature for the Local and Global variables. We decided to implement this feature as an improvement to the usability of Local and Global variables in LabVIEW and I'm afraid that this is not a customizable feature.
You'll actually find that it is now possible to use the keyboard keys to skip to the appropriate local variable name in the list and if you have a very large list you can also use page up and page down.
However if you are utilizing the Local and Global variables this much you may want to reconsider your application architecture. Local and Global variables are the main reasons for race conditions and problematic code. I would consider other methods to pass data from one section of code to another. For example, Functional Global variables.
Thanks
AdamB
Applications Engineering Team Leader | National Instruments | UK & Ireland

Similar Messages

How to change the alphabetic order in my source list

I don't want my source list to be in an alphabetic order. could you tell me how to change that?

http://answers.microsoft.com/en-us/mac

In my music i have lost the column right with the alphabetic order ... how can i get back ?

in my music i have lost the column right with the alphabetic order .. how can i get back ?

Hello Camcam369,
It sounds like you are not seeing the alphabet listed on the right when perusing songs, artists, or albums in the Music app. I recommend a couple of steps you can take to get it back.
The first thing I recommend is quitting and relaunching the applications on your iPod touch:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the Music app, I recommend restarting your iPod and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPod touch:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to disable the Directory listing for the whole server or a particular a

Please let me know how to disable the Directory listing for the whole server or a particular application.
Thank You

I want to disable the tab focusing( tab index) for a JTextField objectsLook through the API and find methods with the word "focus" in the method name.
Also can u tell me about how to change the tab index orders for JTextFields."How to Use the Focus Sub System":
http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html

How to disable the list of websites viewed under the history tab ..?

How to disable the list of websites viewed under the history tab..?
I want to remember the history of websites viewed but I do not want to appear under the history when I open a new website. I can see that only 15 websites can be viewed under the history tab
Please do the needful at the earliest
Thanks & Regards
Srinivas

srinivsd,
Thanks for getting in touch with Mozilla Support! If you want to '''COMPLETELY''' disable your browsing history, take a look at https://support.mozilla.org/en-US/kb/settings-privacy-browsing-history-do-not-track#w_never-remember-history. That will allow you to disable history tracking in Firefox.
However, if this is not what you were asking, please let me know and I will assist you further.
Thanks!

I have changed the apple ID (email, but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

i have changed the apple ID (email) but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

If you see that pop up you enabled icloud. Whether you want or do not want now to use it irrelevant until you actually disable activation lock.
In order to do that you have to change your apple id back to do that just long enough to sign in and back out. System will ask you to verify, don't.
Just sign in on the prompt you getting and then logout. Once done, change apple id to what you have now and verify. Then decide if you want to
use icloud (who does not want to be able to track their phone if lost or stolen).

IMP: How to delete the service order

Hey Experts,
Can you tell me how to delete the service order which was created in IW31..? or we have any Functions Module to delete the service order?
and one more question is I have more than 100 service order in the table ,but it will display only 50 order when i execute this Functions Module BAPI_ALM_ORDERHEAD_GET_LIST
can you tell me how to solve this problem...?
Thanking you in advance,
Regards
J Sarathi

This is what the BAPI_ALM_ORDERHEAD_GET_LIST documentation says
"You can use this method to determine a list of orders according to a list of selection criteria. The number of hits that are produced for the person calling up the list, can be specifically reduced; without further parameter transfers, the first 50 hits are displayed. A complete list of the hits is stored internally. If you call up the selection again within a Logical Unit of Work (LUW) without changing the selection parameters, but with other refurbishment parameters, then you receive further partial quantities of the selection result, as specified by you."
and for deletion
check whether you can set any deletion status through the fm BAPI_ALM_ORDER_MAINTAIN
Also check the business objects BUS2007, BUS2088

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

Question
How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* Tools > Options > Privacy > History: "Remember search and form history"
* https://support.mozilla.com/kb/Remembering+passwords
* https://support.mozilla.com/kb/Form+autocomplete

How to disable the edit Permission after the task approval in project server 2010.

Hi ,
Can this be done.
How to disable the edit Permission after the task approval in project server 2010.
I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
Any Help Would be more than Welcome.

Hi Rohan,
Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
Then of course you could do not custom development to do that.
I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

HT2470 Why does this not explain how to change the sort order?

Why does this (i.e. support at Apple.com) not explain how to change the sort order? I can "arrange" by Date Modified for example but it won't let me switch to use most recent dates first. Also, what is Apple-speak for arrange versus sort anyway? It seems I used to be able to click on a column heading in finder and get a drop down arrow allowing me to change the sort sequence.

Arrange roughly translates to "group the items in the folder." Sort is how each group is ordered. If you have arrange set to none, you can sort by anything. However, there is no way in the Arrange/Sort menu to choose the direction. The only way to do that is in the List View, and you must have Arrangement set to None.
I've submitted an Enhancement Request to allow choosing sort direction from the Arrange/Sort menu, but I haven't ever gotten a response, which is good and bad. Good because they will often respond that they have considered it and don't plan on implementing. Bad in that they've haven't implemented it.

How to check the sales orders that have been created with an Rebate Agreeme

Dear Experts,
Do you know how to check the sales orders that have been created with an Rebate Agreements?
Thanks!!

Hi Hoo Laa,
I have one way but little lengthy.
Rebate condition always appears in the billing document.
So 1st you extract the sales order list from Table VBAK.
once you have the sales order list then you can put your order list in Table VBFA --> Extract the billing document list.
Now put that list in the table VBRK.
In VBRK you will get the "Doc. condition" --> put that doc condition in table KONV with your rebate condition type.
It will show the result.
Later, through VLOOKUP you can identify in which order you have given rebate to your customer.
Already said, Little lengthy
Regards,
MT

In Itunes, my cd's are no longer burning in the specific order I list songs on a newly created playlist. Is there a quik fix for this issue?

In Itunes, my cd's are no longer burning in the specific order I list songs on a newly created playlist. Is there a quik fix for this issue?

Hi RaeTye,
If this issue is happening with an MP3 CD (as opposed to an Audio CD), you may find the following article helpful:
iTunes: How to set the play order of songs on an MP3 CD
http://support.apple.com/kb/ht2455
Regards,
- Brenden

How to Disable the Add & Review Button

How to Disable the Add & Review Button
*Updated with the correct ISF code (the previous code, in case you saved it, was to actually escape apostrophes.  That will be posted seperately.
Note that this solution might not work in your environment - you might have to modify it based on your installation.
Enjoy!
Common_disableAddAndReviewButton()
   if ( Moment == 'ordering' )
        var theForm = document.forms[0];
        var buttonCt = 0;
        for( i = 0; i < theForm.elements.length; i++ )
             if( theForm.elements[i].type == "submit" )
                if ( buttonCt == 0 || buttonCt == 2 )
                    theForm.elements[i].disabled = true;
                     theForm.elements[i].style.visibility="hidden";
                 buttonCt++;

This is GREAT - I added a new Java Script and set it to "when form is loaded" and when I did some test reqs - no Add & Review button !!!!

How to disable the alphabetical order in lists in 8.5

Similar Messages

Maybe you are looking for