How to Disallow two challenge Reponses to be the same

Is there a way to disallow two same challenge questions and to disallow same responses for the challenge questions in OIM???

Thanks for your information.
I found what I need in the Recommended Browsers for Oracle E-Business Suite Release 12.
====
By default the ‘Session Merging’ feature within IE8 prevents this functionality from working correctly.
This IE8 functionality causes the same session id to be used when accessing the same Oracle E-Business Suite environment despite opening a new browser window to launch a second session.
Open a new explorer window using its own session cookie by selecting 'File -> New Session' from an existing browser window.
Run from the command line adding the -nomerge parameter i.e. Start -> Run -> iexplore -nomerge
Create a new IE8 icon adding the -nomerge parameter i.e.
Start -> Program Files
Right click on the Internet Explorer icon and select Properties
Add -nomerge to the end of the link in the Target field i.e.
"C:\Program Files\Internet Explorer\iexplore.exe" -nomerge
Click the OK button to close the window
====
Our IE version is 8,and I can open a new window in a new session by the method below.
But still a question.
The PC which can launch two forms has nothing defferent from the other ones ,and open the form in an usual way,which really confused me...
Edited by: user13115362 on 2011/05/05 20:55
Edited by: user13115362 on 2011/05/05 20:58

Similar Messages

  • How to sync two different Nano's through the same iTunes?

    how do I upload two persons different runs through the same iTunes?
    My wife and I have two different Nanos and seperate sensors but we use the same iTunes which is in my name. Now I have made a new Nike account for my wife but how can I sync her run? At the moment it automaticaly syncs with my account?
    regards
    Morten Timm

    if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

  • How to call two different servlet-url in the same application

    Hi,
    I want to call, consecutively these methods in my application.
    response.sendRedirect(servlet-url1)
    reponse.sendRedirect(servlet-url2)
    but the second method dont answer,
    I think, the first method redirect s with response ,
    but how to call two different servlet ?
    thanks

    if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

  • SBO - How to use two different Stock Account within the same Item Group

    Hi,
    I'm currently stuck within one of my implementation.
    I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
    My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
    Do you have any clue so i can please them and keep using at the same time the item group ?
    Thanking you in advance
    Stephane

    Hi,
    In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
    As such, we can, somehow handle two different chart of accounts.
    In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
    Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
    1 - Duplicate the HQ accounts
    In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
    2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
    Regards
    Stephane

  • FEBA - How to post two or more transactions at the same time?

    Hi,
        one of our banks sends the statemets with many lines that belongs to the same transaction. We have to post partially one line, and afterwards the other line. Any of you know how to post two lines at the same time from the bank statement?
    Thank you in advance,
    Miguel

    Hi,
    I'm sorry for replying so late.
    The solution I reached was to change the a few things in the standard.
    Now I have a new "context menu item". I select two or more transactions and I right-click the mouse. I select that "context menu item" and the next part of the code adds the total amount of the transactions to look for the correct post for the first transaction. Once posted automatically, the next transaction is posted automatically by the system.
    I hope you understand my English. I've problem with technical FI terms.
    Here you are the code:
    First I added a new contextual menu item:
    CL_FEBAN_ALV_GRID=============CCIMP
    call method e_object->add_function
        EXPORTING
            fcode = 'BS_POST_ITEMS'
            text = text-002.
    *{ INSERT DHTK904078 1
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        call method e_object->add_function
            EXPORTING
                fcode = 'ZBS_POST_ITEMS'
                text = text-Z02.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
        call method e_object->add_function
            EXPORTING
                fcode = 'BS_KILL_ADVICE'
                text = text-004.
    CL_FEBAN_ALV_GRID=============CCIMP
    when 'BS_POST_ITEMS'.
        call method cl_feban_propagator=>raise_event
            EXPORTING
                i_event = 'POST_ITEMS'
                i_ref_to_item = l_ref_to_item.
    *{ INSERT DHTK904078 2
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        when 'ZBS_POST_ITEMS'.
            call method cl_feban_propagator=>raise_event
                EXPORTING
                    i_event = 'ZPOST_ITEMS'
                    i_ref_to_item = l_ref_to_item.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
        when 'BS_LOCK_ITEMS'.
            call method cl_feban_propagator=>raise_event
                EXPORTING
                    i_event = 'LOCK_ITEMS'
                    i_ref_to_item = l_ref_to_item.
    CL_FEBAN_PROPAGATOR===========CM001
        when 'POST_ITEMS'.
            raise event post_items
                exporting i_ref_to_item = i_ref_to_item.
    *{ INSERT DHTK904078 1
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        when 'ZPOST_ITEMS'.
            data: zvalor(1) value '' .
                export zvalor from 'X' to memory ID 'ZFEBA01'.
                raise event post_items
                    exporting i_ref_to_item = i_ref_to_item.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
        when 'LOCK_ITEMS'.
            raise event lock_items
                exporting i_ref_to_item = i_ref_to_item.
    Now, I proceed to calculate the total amount of the selected transactions to look for the correct one to post.
    LNEW_FEBAF01
    *     user parameter
            l_feban_position type c.
            field-symbols: <items> type item_tab_type.
    *{ INSERT DHTK904077 1
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        data: zvalor(1) value '',
            zkwbtr type kwbtr,
            kwb type kwbtr.
        import zvalor to zvalor from memory ID 'ZFEBA01'.
        if ( zvalor is not initial ).
            if not i_ref_to_item is initial.
                assign i_ref_to_item->* to <items>.
                loop at <items> into h_item.
                    select single kwbtr
                        into kwb
                        from febep
                        where kukey = h_item-kukey and
                            esnum = h_item-esnum.
                            zkwbtr = zkwbtr + kwb.
                endloop.
            endif.
            export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
        endif.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
        refresh g_picked_items.
        if not i_ref_to_item is initial.
            assign i_ref_to_item->* to <items>.
            loop at <items> into h_item.
                move-corresponding h_item to h_picked_items.
                append h_picked_items to g_picked_items.
            endloop.
        endif.
        submit rfebbu00 and return
            user sy-uname
            with anwnd = r_doc->*-anwnd
            with s_kukey in s_kukey
            with s_esnum in s_esnum
            with buber = g_posting_area
            with mregel = '1'
            with function = 'C'
            with mode = g_mode
            with p_bupro = g_bupro.
    *{ INSERT DHTK904077 2
    *--> Miguel Estu00E9vez - 17/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        if ( zkwbtr is not initial ).
            select single kwbtr
                into kwb
                from febep
                where kukey = h_kukey-low and
                    esnum = h_esnum-low.
                    zkwbtr = zkwbtr - kwb.
            export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
        endif.
    *<-- Miguel Estu00E9vez - 17/06/2008
    *} INSERT
        refresh s_kukey.
        refresh s_esnum.
        clear h_kukey.
        clear h_esnum.
    endloop. "loop over all picked items
    call function 'CUSTOMIZED_MESSAGE'
        EXPORTING
            i_arbgb = 'NEW_FEBA'
            i_dtype = '-'
            i_msgnr = '110'.
    RFEBBU00
    * original transaction currency provided and posting area = 2.
            ftclear-selvon = febep-fwbtr. "INSERT - mpEURO
        ENDIF. "INSERT - mpEURO
        CONDENSE ftclear-selvon NO-GAPS.
    *{ INSERT DHTK903977 1
    *--> Miguel Estu00E9vez - 16/06/2008
    * RIPI 24/04/2008 - Conciliaciones
    * Permitir conciliar mu00E1s de un apunte a la vez
        data: zkwbtr type kwbtr.
        import zkwbtr to zkwbtr from memory ID 'ZKWBTR'.
        if ( zkwbtr is not initial ).
            ftclear-selvon = zkwbtr.
            clear zkwbtr.
        endif.
    *<-- Miguel Estu00E9vez - 16/06/2008
    *} INSERT
    APPEND ftclear.
    ** Begin of comment C5053248
    * perform druck_buzei_ftclear using ftclear-agkon.

  • How to run two versions of dreamweaver at the same time

    How to run two versions of any dreamweaver at the same time?
    There must be a way to do this.

    east99 wrote:
    > How to run two versions of any dreamweaver at the same
    time?
    > There must be a way to do this.
    Yes, there is: on two separate computers.
    You cannot run two versions of Dreamweaver simultaneously on
    the same
    computer. They can coexist side by side, but the operating
    system will
    not let you run them together.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • How to use two different boot images in the same task sequence

    I have a need to use Two boot images in the same task sequence. The reason is I'm deploying ZTI to McAfee encrypted devices which I have already done with McAfee v6 Encryption successfully.
    Here's where my problem comes in. We are about to deploy McAfee v7 which means we will have a mix of v6 and v7 in our environment. I must have two special Boot images one with v6 drivers and one with v7 drivers in order for my process to work. I don't see
    a way right now to assign more than one boot image to a task sequence. Is there any way to do this?
    If I can't do that then I will have to create two task sequences and target collections based on the Endpoint Encryption version to deploy to.
    If anyone has suggestions it would be much appreciated. Thank you

    Have you tested copying those files to %windir%\system32\drivers during the WinPE session (just enable commandline support to your boot image) to see if they need to be in there before the OS start? Test that and if they don't need to be there during the
    boot up of WinPE then:
    Create two packages (v6 and v7)
    "Run command line", use the package created earlier and just use "copy /Y .\*.* %windir%\system32\drivers" ...again, this should be run according to your needs, variable or some other check like I said

  • How to run two DAQmx Read (Analog) at the same time?

    I would like to measure a voltage and a current,
    but the two cannot be conbined in one task.
    Therefore, I had to use two DAQmx Read in the same program. But it did not run.

    Multiple channel types can be combined in a single DAQmx Read. One way is to use multiple DAQ Create Channel fucntions. Look at the posting here and the second example at the link in the answer.

  • How to start two or more tasks at the same time?

    Hi all,
      I have few tasks setup to send analog and digital output to different channel with buffer and given sampling rate. I need to precisely control the timing of samples output to each channel. But if I start the task in labwindows
        DAQmxStartTask(taskHandle1)
        DAQmxStartTask(taskHandle2)
        DAQmxStartTask(taskHandle3)
    they actually not start at the same time since they are exectued in sequence. I wonder how much time delay will be if I start each task in sequence. Also, is it possible to have 2 or more tasks started at the same time?
    p.s. I think it will be easier if I could bind different channels to a single virtual channel but I don't think it is possible to create a signle virtual channel with analog channel and digitial channel.

    RobertoBozzolo wrote:
    I had success in doing something similar on the input side by sharing the same sample clock across the tasks with:
    DAQmxCfgSampClkTiming (DigitalTaskHandle, "/Dev1/ai/SampleClock", 1000, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 1000);
    In my application I had the power to have the same acquisition speed on all tasks, so that the sample clock could be same on all of them.
    The conceptual framework is this one (pay attention to the step order):
    Setup your AO task
    Setup your DO task
    Set the DO task to share the AO sample clock with the instruction given above
    Start the DO task (IMPORTANT: it must precede the AO task start, so that DO task is started but does not generate samples)
    Start the AO task
    If you have different sample speed on the tasks, I suppose an alternative is to use a start trigger sharing some digital signal among them. I have seen examples that use a separate counter output as a start trigger.
    Thanks a lot. It gives me a good information, I think that will help. I am encountering another sitution, if task1 is analog output with continuous samples with rate 100000 samples/second and task2 and task3 are a single digital sample (i.e. write only 1 sample to one digital line). In task1, I write continuous samples and there will be a spike (of 2.2V) at the time 1.2ms after the task started. And I want to write to the digital channels (task2 and task3) at 0.2ms before the spike was set in task1. In this case, there is only one sample written to DO task, so how does it work to use the sample clock source?
    In your last suggestion, we could use tirgger but how does it help? Is there any example I can follow? Thanks.

  • How to exclude two kind of files in the same folder in sender cc?

    Hi,gurus:
    Now we are using "advanced selection for source files" in sender file adapter.
    Our requirement is as below:
    The source directory is  c:\test and there are many files in the directory.
    We want to transfer all the files except aa.txt and bb.txt.
    We have to implement it in one scenario,but it couldn't work.
    It worked only when we transferred all the files except aa.txt or bb.txt,but not work when we want to transfer except aatxt and bb.txt.
    I checked the blog "XI/PI: how to exclude files in a sender File adapter?",but it is not the same issue.
    Any help will be appreciated.

    Hi,
    The only way to solve your purpose is
    Provide the list of file names like c. d. e. f. whatever possible number of file names in the "File Name Mask" column and provide the directory names by clicking on plus for additional rows. just dont use aa.* and bb. anywhere.This will do your purpose.
    Thanks!

  • How to sepparate two ipads link toguether with the same id

    i have two ipads link with the same id it is possible to have different ids each one???, i have two ipads link with the same id it is possible to have different ids each one???

    Very easily. I have an iPod touch and iPad on the same account with totally different content.
    If you use iTunes, connect each iPad to your computer and open iTunes and deselect any automatic updating/syncing. If you don't sync with iTunes but have them set up independently, under the settings, App Store, turn off automatic downloads for apps, etc.
    I'm old fashioned, I set up and sync my iPad and iPod to my computer and iTunes. Each device has a different name  and I manage content manually and only allow sharing on what I want shared.

  • How to run two WebLogic server instances on the same machine

    The setup is to run server instance A with all EJBs and server instance
    B with all servlets.
    I edited the weblogic.properties under myserver to include all EJBs and
    create server2 under \weblogic parallel to myserver and put a new
    weblogic.properties under server2 that has all the servlets aliases.
    Is this the right way?
    two server ran but I cannot hit the servlet.

    The setup is to run server instance A with all EJBs and server instance
    B with all servlets.
    I edited the weblogic.properties under myserver to include all EJBs and
    create server2 under \weblogic parallel to myserver and put a new
    weblogic.properties under server2 that has all the servlets aliases.
    Is this the right way?
    two server ran but I cannot hit the servlet.

  • Hi, we have two iphones with two accounts.  The apple tv automatically syncs with one account to play music from the iphone to apple tv.  How can I use my iphone to do the same?

    Hi, we have two iphones with two accounts.  The apple tv automatically syncs with one account to play music from the iphone to apple tv.  How can I use my iphone to do the same?

    Our experience is a little different, we have different iTunes accounts for different family members, each family member has their own iTunes library on their own mac, each mac uses my Apple ID for homesharing and we are able to play purchased content from each library on the Apple TV.

  • How do you keep two users logged in at the same time?

    How do I keep two users logged in at the same time to be able to access home sharing?

    Fast User Switching in Users & Groups or Accounts preferences in Login Options.

  • How to avoid that two or more people alter the same Sales Order same time

    I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
    If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
    So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
    To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution.
    I've already put this thread in the Business One forum and someone suggested to put it in the Business One SDK forum, as there isn't a solution in Business One itself.
    So if someone can give me a direction for a solution I would be very pleased.
    Best regards,
    Tim

    Hi Tim,
    The only thing that comes close to what you want in standard SBO is Data Ownership. However, this can't stop someone editing a document that is already being edited.
    You can't use stored procedures to track which document is open because the SBO_SP_TransactionNotification proc (which is the only one that you are able to customise) is triggered when a document is updated or added (or cancelled or closed) and not when the document is actually being edited in the user-interface.
    You could do this by writing an addon that uses the UI API to trap events in the sales order form. In theory, a sales order is being edited if the sales order form is in Update mode (ie in order for the form to be in Update mode, the user must have selected an existing document and changed the value of at least one field). You can trap the event of the user changing a value and then log the user and document in a table. When other users try to edit the same document, you could check the table and then prevent them changing values. When the first user clicks on the update button (or cancels the update or closes the form etc etc) you can remove the lock on the document. However, I have doubts as to how robust it would be. The problem with this kind of locking solution is that you sometimes get 'stranded' locks (eg user was editing a document when their workstation crashed) and the solution can end up being more troublesome than it is worth.
    Kind Regards,
    Owen

Maybe you are looking for