How to disappear the sub Report if the values are null from db..

hi.
i have one requirement ie.
i put two sub reports at report footer section..
sub report values are coming from the data base
Some times there is no values in data base at sub report two
plz have a look on below image..it becomes empty.
can i disappear the sub report if there is no values..
I need your valuable suggestions..

Hi
In your sub reports, you also have to suppress the values (report labels,headings etc) using a formula.
Go in Report Menu--Section Expert--Suppress -- Formula editor and write the follwoing :
if Count({Yoursubreportfield)}) > 0 then false else true
This will suppress your headers and footers or any other secitons which has static information.
Now in the main report go in section expert and check 'Suppress Blank Sections'
Also check you have applied New Page before or After for any of your sections.
--Praveen G

Similar Messages

How to add a sub report at the end of the main report whilst grouped

Hi!
I have a main report that is grouped by the Customers name and then details of transactions they did with the company.
I need to add a letter at the end of each group for each customer (With their name displayed in the letter). I tried adding a sub report in the report footer, but it only appears once at the end of the report, rather than at the end of each group for each customer.
How can I achieve the desired result?
Regards
Vik

Vik,
You are on the right track with the sub-report.
1. Create your letter in a separate report.
2. Add the Letter Report to your original report as a sub report in the group footer.
3. Set the report links on the "Group By" field.
This will give you a letter record for each report record with the same grouping as the main report.
Hope this helps,
Jason

How to Avoid Printing the data twice when the sub report has drill down?

Hello,
I have a sub report that has drill down which is placed in report footer.When i run the report sub report displays the data but when i tried to drill down it displays the same data again.After that i can able to drill down on sub report.Is there any way to avoid
printing the same data twice.
Thanks in advance.

Hi,
If the subreport you're referring to does not grow in size and it does not span multiple pages and you know the size of it, here's what you can do to stop drilling into subreports :
1) Create a text object as large as the subreport (perhaps bigger than it) and fill it with spaces or new lines
2) Place it 'over' the subreport such that it covers the entire area occupied by the subreport
3) The subreport at all times should be smaller than the text object in all dimensions
Now, when you hover the mouse over the subreport, there isn't any magnifying glass for you to drill down into.
If the subreport has further drill-down functionality, then this isn't for you! Because, it just wouldn't allow you click on any objects in the subreport because of the text object eclipsing it. This is the only workaround I know at this point in time and I know a lot of users are looking for this.
I would suggest that you log this as an Enhancement Request at http://ideas.sap.com for our developers to have a look into this.
And finally, I also found an old forum post where Jamie has suggested a way to get this working on the Business Objects Environment. Give it a shot, if that's where the reports are eventually run.
How to disable subreport view
Hope this helps!
-Abhilash

How to create a snapshot report on the specific destination?

dear all
How to create a snapshot report on the specific destination?
thanks
john

user8779435 wrote:
dear all
How to create a snapshot report on the specific destination?
thanks
john
Hi,
when prompted just input the full path with filename for example
Enter value for report_name: /tmp/awrreport.htmlHope this helps
Cheers

Can i view & analysis the customer report asper the sales area wise how?

can i view & analysis the customer report asper the sales area wise how?

Hi,
If you are talking about FBL3N or any other FI customer subledger report, then Yes and No. If you have customers extended to multiple sales area, then no, if there is a one to one relationship with the sales area then yes.
Cheers.

How to check for the sub folder in the document library Is already Exist using CSOM?

Hi,
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder
IsFolder alredy Exist.
private
string IsFolderExist(string InputFolderName)
string retStatus = false.ToString();
try
ClientContext context =
new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
            context.Credentials =
CredentialCache.DefaultCredentials;
List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields = list.Fields;
CamlQuery camlQueryForItem =
new CamlQuery();
            camlQueryForItem.ViewXml =
string.Format(@"<View Scope='RecursiveAll'>
<Query>
                                        <Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
                                            </Eq>
</Where>
</Query>
                            </View>",
@"/sites/test/hcl/"
+ InputFolderName);
            Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
            context.Load(listItems);
            context.ExecuteQuery();
if (listItems.Count > 0)
                retStatus =
true.ToString();
else
                retStatus =
false.ToString();
catch (Exception ex)
            retStatus =
"X02";
return retStatus;
thanks
Sundhar

Hi Sundhar,
According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
ClientContext clientContext = new ClientContext(siteUrl);
List list = clientContext.Web.Lists.GetByTitle(libName);
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>1</Value>
</Eq>
</Where>
</Query>
</View>";
//camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
ListItemCollection items = list.GetItems(camlQuery);
clientContext.Load(items);
clientContext.ExecuteQuery();
Console.WriteLine(items.Count);
if (0 == items.Count)
//create sub folder here
Best regards
Patrick Liang
TechNet Community Support

How will schedule the BW report in the Background ?

Hi
Small query, i have one management report in the BI, which should be run early morning and send mail to the GM,
We can schedule the ABAP report but no the BW !!!!
How will schedule the BW report in the Background ?
How the mail send to the GM ?
Please advise us
REgards
Anwer Waseem
SAP BASIS

Reporting Agent will be only supported in the 3.X runtime in 2004s,start using Bex Broadcaster.Reporting agent is going to be obsolete or is would say.
All the new functionalities will be implemented in Broadcaster only.
Advantage -The old Reporting Agent in BW 3.x could pre-calculate the data of a template and access it through the URL . It could not broadcast queries, workbooks or web templates by email or to KM folders.
https://websmp203.sap-ag.de/~sapdownload/011000358700004219392005E/ERQA_INFOBROADCASTING.PDF
http://csc-studentweb.lrc.edu/swp/Berg/articles/Reporting_Analytics_2006_Broadcasting_v10.ppt
Note 760775 - Settings for Information Broadcasting
Hope it Helps
Chetan
@CP..

Very urgent :how I order by my report within the report option not change i

Hi master
Sir I design the report but I need my report order by cheq_no now my report order by voucher no but If I change in query then my format must be change that very problem for me I again design
Is any option in report through which I order by my report as per my require column I is if I need on cheq_no , voucher_no or date
Please give me idea how I order by my report within the report option not change in report query
Thanking you
aamir

Use a lexical parameter (see online help):
select ...
order by &sort_parameter

How to obtain the alv reports in the dilog programing.

how to obtain the alv reports in the dialog programming, that is when the push button in the screen in clicked it must be directed to the report, where to write the code for the report.

Hi
Use LEAVE TO LIST PROCESSING and develop your normal ALV dispaly as usual. System automatically takes care of this.
I tried for normal report but try above even in the case of ALV reports
Cheerz
Ram

Fix the coulmn width of main report which contain the sub report( remains white space of extra width)

Hi,
I am setting the column width of main report and that column is bounded with the sub report which contain some data.
But if width is exceeded other than sub report data that width is showing as white space block.
It should be showing as normal header in gray shade.
Please provide the solution for this. see the screen attached.
Thanks

Hi Raj,
According to your description, you want to show the sub report without any white space in the textbox. Right?
In Reporting Services, when we display a sub report in a textbox, this textbox will always show the whole sub report area. If the textbox is smaller than the report area, this textbox will extend automatically to fit the size of the sub report. Otherwise,
it will has white space inside of the textbox. And if you have white space in your sub report, it will also be displayed in the textbox. So you may need to adjust the sub report size to make it fitted in main report.
Reference:
Subreports (Report Builder and SSRS)
If you have any feedback on our support, please click
here.
Best Regards,
Simon Hou (Pactera)

How do I Change sub category to a key word tag in Elements 6. When I right click the sub category is the possibility to change not selectable

I want to change a sub category to a key word tag in Elements 6. When I right click the sub category is the possibility to change not selectable. How to do it?

If you want to change the category you need to change the feed, which means changing it in WordPress. You need to pick one category and, if there is one, one sub-category from the official list here:
http://www.apple.com/itunes/podcasts/specs.html#categories
It is possible to have further categories, though I don't know whether WordPress will allow that, but you should put the most relevant one in first.
Once you've amended it simply re-upload the feed and wait for the Store to catch up. You don't need to resubmit.

How many users can view the same report at the same time in obiee answers

Hi All,
How many users can view the same report at the same time in obiee answers..?
What is max and minimum number of users.
Do we need to increase any system configuration.
Thanks,
Jagadees.

Hi,
Many users can view report at same time.It depends on the server if it can accept those many users at same time.If number of users increases OC4J may not work properly.
Refer : http://www.artofbi.com/index.php/2009/10/what-is-oc4j-an-oracle-application-server-distribution-really/
Regards,
Srikanth

How can I produce a report of the people asked to complete a form and their response?

How can I produce a report of the people asked to complete a form and their response?

Thanks. I cover four different sites. We are using the same questions for the four sites. Each site has a different client base (with different users). So I am inviting persons to complete the form in an ad-hoc basis following training sessions (so far I have trained 10 out of 57). The responses will be viewed by two or three Managers. The problem is that it is difficult to see who has started filling out the form, who has not even looked at it, and those who have completed it. So for example at the moment I have a zero response to my requests to complete the form, although some people may be working on the form?
Russell W H Bulley C.Eng B.Eng MIET
Critical Engineering Manager
MITIE – Delivering FM for Lloyds Banking Group
5 Limeharbour Court, Limeharbour, London, E14 9RH
M: 07900704196
www.MITIE.com<http://www.mitie.com/>
Follow us:
Description: Description: Description: Description: Description: Description: Description: twitter_32<http://twitter.com/mitie_group_plc>[Description: Description: Description: Description: Description: Description: Description: facebook_32]<http://www.facebook.com/mitiepeople> Description: Description: Description: Description: Description: Description: Description: linkedin_32 <http://www.linkedin.com/company/mitie?trk=fc_badge> Description: Description: Description: Description: Description: Description: Description: youtube_32 <http://www.youtube.com/user/MITIEGroupPLC> Description: Description: Description: Description: Description: Description: Description: rss_32 <http://www.mitie.com/rss> Description: Description: Description: Description: Description: Description: Description: flickr_32 <http://www.flickr.com/mitie_group_plc

How to pass value from the Z Report to the selection screen of the std rep

Dear Experts,
i have developed a report and the values are maintained only in internal table based on some condition. When I execute the report, for example MM60, there is a material number field for multiple selection.
the report should call the standard transaction and pass the values from the internal table to the multiple selection- material number of the standard transaction.
the standard transaction should never get executed automatically. Only the value should get passed from internal table to the standard t code. Please help.
regards,
Shankar

Hai
Go through the following Documents
SUBMIT rep.
Additions
1. ... LINE-SIZE col
2. ... LINE-COUNT lin
3. ... TO SAP-SPOOL
4. ... VIA SELECTION-SCREEN
5. ... AND RETURN
6. ... EXPORTING LIST TO MEMORY
7. ... USER user VIA JOB job NUMBER n
8. ... Various additions for parameter transfer to rep
9. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls the report rep . Leaves the active program and starts the new report rep .
Addition 1
... LINE-SIZE col
Effect
Prints the report with the line width col .
Addition 2
... LINE-COUNT lin
Effect
Prints the report with lin lines (per page).
Addition 4
... VIA SELECTION-SCREEN
Effect
Displays the selection screen for the user. In this case, the selection screen is redisplayed after return from the report list display - the user's entries are retained.
Addition 5
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal mode .
Addition 6
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in SAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. You can read the saved list from SAP memory with the function module 'LIST_FROM_MEMORY' and then (for example) store it in the database with EXPORT . You can process this list further with the function modules 'WRITE_LIST' , 'DISPLAY_LIST' ... of the function group "SLST" .
Addition 7
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n . The job runs under the user name user and you can omit the addition USER user . The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT . This addition can only be used with the addition ...AND RETURN .
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
Addition 9
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep .
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETER s. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari . On the other hand, all variant-related actions on the selection screen of rep (Get , Save as variant , Display , Delete ) refer to the variants of prog .
Example
SUBMIT REPORT01
VIA SELECTION-SCREEN
USING SELECTION-SET 'VARIANT1'
USING SELECTION-SETS OF PROGRAM 'REPORT00'
AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00 .
Note
Runtime errors
LOAD_PROGRAM_NOT_FOUND : The specified program was not found.
SUBMIT_WRONG_TYPE : The specified program is not a report.
SUBMIT_IMPORT_ONLY_PARAMETER : Only one value passed to a report parameter.
SUBMIT_WRONG_SIGN : Invalid value passed to a selection with the addition SIGN .
SUBMIT_IN_ITAB_ILL_STRUCTURE : Table passed to a selection with WITH sel IN itab had an unexpected structure.
Try with this Example
Data: listobject like abaplist occurs 1 with header line.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1 .
IF sy-subrc <> 0.
message ID '61' TYPE 'E' NUMBER '731'
with 'LIST_FROM_MEMORY'.
ENDIF.
Thanks & regards
Sreenivasulu P

How to migrate the discoverer reports using the PPM tool

Hi,
Did Any One Migrate the Discoverer Reports Using The PPM (Kintana Tool) From One Oracle Instance To The Other?
Please Help Me If Any One Knows?
Thanks,
Ankit

Hi User,
Create a new shared folder.
Provide access to all the users.
Now, ask the user who created the report in 'My Folders' to save the report in this new shared folder.
And, Delete those reports in 'My Folders'.
Now, as the report is saved in New shared folder you can access - this one.
Else--- Ask the user who created the report in my folder to make sure that it is available to all users. (Permissions - Permission should need to be provided for Administrator group)
Thank you.

How to disappear the sub Report if the values are null from db..

Similar Messages

Maybe you are looking for