How to display a messageTextInput as Link in readonly mode

Hi All,
I want to give a link on particular field on advanced table and on click on that field the page will redirect on another page but there are in main page single selection is there and on click it will turn on editable. so how can i handle both things on same field.
Thanks
Edited by: user9087395 on May 4, 2010 8:45 AM

Hi,
You can have two fields in same advance table column, one is of type link/styled text and other is of type input field.
You can set rendered properties of these two fields from SPEL using read only flag. You might need to derive that whether current access level is edit or read only.
Thanks,
Ritesh

Similar Messages

  • How to display an object that links to another object

    I am trying to find out how display 2 objects (box's) in a frame and connect them with a line so if I move one box the line stays connected.
    Can anyone point point in the direction of any tutorials or example.
    Eventually I plan to change these box's to be a database table containing attributes and the link representing the fk.

    Eric_Davidson wrote:
    I am trying to find out how display 2 objects (box's) in a frame and connect them with a line so if I move one box the line stays connected.
    Can anyone point point in the direction of any tutorials or example.
    Eventually I plan to change these box's to be a database table containing attributes and the link representing the fk.Which part do you need help with? The drawing of the boxes, the handling of the GUI, the dragging, etc?
    Do you have any code started?

  • How to display two or more links in a single column

    Hi,
    Is there a way to display two links in a single column in a sql query report . I am able to specify one but I am not able to add links to the same column . I want to take the same column id and redirect the user to different pages based on the values selected .
    Thanks

    There is no way to this declaratively that I know of. Some alternatives...
    1. Put the conditional branching logic in the report SQL itself. e.g. case when ... then '< a href=..' else '< a href=...' end and make sure the column display type is Standard Report column
    2. Have the declarative column link go to a dummy/intermediate page and setup On Load: Before-Header branches on that page to redirect to the desired page based on the item value(s) passed in to the intermediate page.

  • How to display LOV on web in ENTER-QUERY mode with form or block query only.

    Hello all
    How can I display lov automatic on the web in from enter-query
    mode in form or block query only mode.
    thankx

    If I understand correctly your explanation, your called form
    fails to activate the LOV in enter-query mode when it is deployed
    and test on the browser.
    So lets proceeed like this, to make it work in all environments,
    let us programetically activate the LOV.
    HOW?
    In the called form, write in the WHEN-NEW-ITEM-INSTANCE TRIGGER
    at block level (if have more than one LOV)
    IF :SYSTEM.MODE = 'ENTER-QUERY' THEN
    IF get_item_property(:system.cursor_item,lov_name) IN ('YOUR
    LOV1', 'LOV2' etc) THEN
    IF SHOW_LOV(get_item_property(:system.cursor_item,lov_name))
    THEN
    NULL;
    END IF;
    END IF;
    END IF;
    The above code maybe tweak to suite your need and condition.
    This way, we explicitly make the LOV appear in ENTER-QUERY mode
    whenever the user clicks on an item with an attached LOV.
    Hope this helps.
    Mohammed R.Qurashi

  • How to display multi-lines text correctly (view only mode)

    Hi,
    I have a description field that includes multi-lines format, where the lines are being separated by
    characters: chr(10) and chr(13).
    When I’m using messageStyleText (or rawText) – I’m getting all the data in one line.
    Can you please recommend of an OAF item that will display the text correctly?
    Should I use another character as the line separator?
    Thanks in advance,
    Rona

    Hi Rona;
    rawText item supports HTML tags. so you can use br tag.
    Best Regards;
    GsrC.
    Message was edited by:
    GsrC

  • How I can open a jsp page in readonly mode

    Hi, I have a problem in JSP. I want to open a jsp page in read only mode. How I can do this?

    Can you explain what you mean by "open a jsp page in read only mode"? open the jsp file in an editor in read only mode? load the jsp page only once all by the server? tell web client that the response will never change?

  • How to display URL images and URL link (html) from Smartforms?

    Hi Gurus,
    I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
    /people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
    My code is like this..
    <--- Start Code.
    FORM call_smartforms.
      DATA : lv_subject TYPE so_obj_des,
             lc_true(1) VALUE 'X',
             lw_control_parameters TYPE ssfctrlop,
             lw_output_options TYPE ssfcompop,
             lc_graphics(8) VALUE 'GRAPHICS',
             lw_xsfparam_line TYPE ssfxsfp,
             lc_extract(7) VALUE 'EXTRACT',
             lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
             lc_mygraphics(11) VALUE 'mygraphics/',
             lc_content_id(10) VALUE 'CONTENT-ID',
             lc_enable(6) VALUE 'ENABLE',
             lw_job_output_info TYPE ssfcrescl,
             lw_html_data TYPE trfresult,
             lw_graphics TYPE ssf_xsf_gr,
             lt_graphics TYPE tsf_xsf_gr,
             lv_html_xstr TYPE xstring,
             lw_html_raw LIKE LINE OF lw_html_data-content,
             lv_incode TYPE tcp00-cpcodepage VALUE '4110',
             lv_html_str TYPE string,
             lv_html_len TYPE i,
             lc_utf8(5) VALUE 'utf-8',
             lc_latin1(6) VALUE 'latin1',
             lv_offset TYPE i,
             lv_length TYPE i,
             lv_diff TYPE i,
             lt_soli TYPE soli_tab,
             lw_soli TYPE soli,
             lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
             lv_name TYPE mime_text VALUE 'sapwebform.htm',
             lv_xstr TYPE xstring,
             lw_raw TYPE bapiconten,
             lt_solix TYPE solix_tab,
             lw_solix TYPE solix,
             lv_filename TYPE string,
             lv_content_id TYPE string,
             lv_content_type TYPE w3conttype,
             lv_obj_len TYPE so_obj_len,
             lv_bmp TYPE so_fileext VALUE 'BMP',
             lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
             lc_doc_bcs TYPE REF TO cl_document_bcs,
             lc_bcs TYPE REF TO cl_bcs,
             lc_send_exception TYPE REF TO cx_root,
             lw_adsmtp TYPE lty_adsmtp,
             lv_mail_address TYPE ad_smtpadr,
             lc_recipient TYPE REF TO if_recipient_bcs,
             lc_send_request TYPE REF TO cl_bcs,
             lv_sent_to_all TYPE os_boolean.
      DATA : v_language TYPE sflangu VALUE 'E',
             v_e_devtype TYPE rspoptype.
      v_form_name = 'ZTEST_EMAIL'.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = v_form_name
        IMPORTING
          fm_name            = v_namef
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
    starting here. ***
    Set title for the output
      lv_subject = 'Smartforms.'.
    Set control parameters to "no dialog"
      lw_control_parameters-no_dialog = lc_true.
    IF lw_service_subject-code = lc_fm1.
    *--- To get output device type
      CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
        EXPORTING
          i_language    = v_language
          i_application = 'SAPDEFAULT'
        IMPORTING
          e_devtype     = v_e_devtype.
      lw_output_options-tdprinter = v_e_devtype.
      lw_control_parameters-getotf = 'X'.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
    Set output options
      lw_output_options-xsf        = lc_true.
      lw_output_options-xsfcmode   = lc_true.
      lw_output_options-xsfoutmode = 'A'.
      lw_output_options-xsfoutdev  = space.
      lw_output_options-xsfformat  = lc_true.
      lw_xsfparam_line-name  = lc_graphics.
      lw_xsfparam_line-value = lc_extract.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
      lw_xsfparam_line-name  = lc_graphics_directory.
      lw_xsfparam_line-value = lc_mygraphics.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
      lw_xsfparam_line-name  = lc_content_id.
      lw_xsfparam_line-value = lc_enable.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
    Get the smartform content
      CALL FUNCTION v_namef
        EXPORTING
          control_parameters   = lw_control_parameters
          output_options       = lw_output_options
    *pass other application specific parameters (eg order number, items ).
      IMPORTING
          job_output_info    = lw_job_output_info
      TABLES
          tt_tabh              = tt_tabh
          tt_tabb              = tt_tabb
          tt_tabf              = tt_tabf
      EXCEPTIONS
          formatting_error = 1
          internal_error   = 2
          send_error       = 3
          user_canceled    = 4
          OTHERS           = 5.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
      lw_html_data  = lw_job_output_info-xmloutput-trfresult.
      lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
      CLEAR lv_html_xstr.
      LOOP AT lw_html_data-content INTO lw_html_raw.
        CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
      ENDLOOP.
      lv_html_xstr = lv_html_xstr(lw_html_data-length).
      CALL FUNCTION 'SCP_TRANSLATE_CHARS'
        EXPORTING
          inbuff       = lv_html_xstr
          incode       = lv_incode
          csubst       = lc_true
          substc_space = lc_true
        IMPORTING
          outbuff      = lv_html_str
          outused      = lv_html_len
        EXCEPTIONS
          OTHERS       = 1.
    *HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
    *EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
      REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
    CALL METHOD html_control - >load_mime_object
       EXPORTING
         object_id  = 'ZWN'
         object_url = 'ZWN.GIF'
       EXCEPTIONS
         OTHERS     = 1.
      REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
    REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
       break mhusin.
      lv_html_len = STRLEN( lv_html_str ).
      lv_offset = 0.
      lv_length = 255.
      WHILE lv_offset < lv_html_len.
        lv_diff = lv_html_len - lv_offset.
        IF lv_diff > lv_length.
          lw_soli-line = lv_html_str+lv_offset(lv_length).
        ELSE.
          lw_soli-line = lv_html_str+lv_offset(lv_diff).
        ENDIF.
        APPEND lw_soli TO lt_soli.
        ADD lv_length TO lv_offset.
      ENDWHILE.
      CREATE OBJECT lc_mime_helper.
      CALL METHOD lc_mime_helper->set_main_html
        EXPORTING
          content     = lt_soli
          filename    = lv_name
          description = lv_subject.
      LOOP AT lt_graphics INTO lw_graphics.
        CLEAR lv_xstr.
        LOOP AT lw_graphics-content INTO lw_raw.
          CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
        ENDLOOP.
        lv_xstr = lv_xstr(lw_graphics-length).
        lv_offset = 0.
        lv_length = 255.
        CLEAR lt_solix[].
        WHILE lv_offset < lw_graphics-length.
          lv_diff = lw_graphics-length - lv_offset.
          IF lv_diff > lv_length.
            lw_solix-line = lv_xstr+lv_offset(lv_length).
          ELSE.
            lw_solix-line = lv_xstr+lv_offset(lv_diff).
          ENDIF.
          APPEND lw_solix TO lt_solix.
          ADD lv_length TO lv_offset.
        ENDWHILE.
        CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
        CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
        lv_content_type = lw_graphics-httptype.
        lv_obj_len      = lw_graphics-length.
    *Add images to the email
        CALL METHOD lc_mime_helper->add_binary_part
          EXPORTING
            content      = lt_solix
            filename     = lv_filename
            extension    = lv_bmp
            description  = lv_description
            content_type = lv_content_type
            length       = lv_obj_len
            content_id   = lv_content_id.
      ENDLOOP.
      TRY.
          lv_subject = lv_subject.
          lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
                   i_subject          = lv_subject
                   i_multirel_service = lc_mime_helper ).
        CATCH cx_document_bcs INTO lc_send_exception.
        CATCH cx_bcom_mime INTO lc_send_exception.
        CATCH cx_gbt_mime INTO lc_send_exception.
      ENDTRY.
    Create send request
      TRY.
          lc_bcs = cl_bcs=>create_persistent( ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
      TRY.
          lc_bcs->set_document( i_document = lc_doc_bcs ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
    Set-up email receiver
      lv_mail_address = '[email protected]'.
    TRANSLATE lv_mail_address TO UPPER CASE.
      TRY.
          lc_recipient = cl_cam_address_bcs=>create_internet_address(
              i_address_string = lv_mail_address ).
        CATCH cx_address_bcs INTO lc_send_exception.
      ENDTRY.
      TRY.
          lc_bcs->add_recipient( i_recipient = lc_recipient ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
    Send smartforms as HTML email
      TRY.
          lc_bcs->send( ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
      COMMIT WORK.
      WRITE:/ 'Mail sent'.
    ENDFORM.                    "call_smartforms
    End Code --->
    Thanks and Regards.

    1- put your images in a directory under the web app directory. Example: app/images/
    2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
    3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

  • I have just bought an ipad mini with ret.display, I wish to link up my Mac Book Pro (10.6.8 system) to iCloud. In system preferences there is no iCloud icon to select. How do I get my MacBook updated to accept iCloud.

    I have just bought an ipad mini with ret.display, I wish to link up my MacBook Pro to icloud with my ipad, but my MacBook doesnt have an icloud icon in system preferences. How do I upgrade my MacBook to accept iCloud link.

    See -> Mavericks System Requirements.
    Most of us are running Mavericks with no problems - others seem to be having various problems (if you check out the Mavericks forum). But I would recommend that you have a current backup whichever way you go.
    Clinton

  • How to display the one BSP View page (not a start page)Through URL link..

    Hi Sir/Madam,
                 I want to open one BSP view page through URL link...
    Let me Explain clearly..
                I have an Z application ZHRRCF_APPROVAL..In this application approve.bsp file i have added som more Fields..and Finally I am going to click ApproVe Buton /Reject Button.When i click the reject button the the items are rejected.Its working fine.....
              My Requirement is :
                   1. I want to display the approval page directly when i click the URL link from mail box.--i am getting this .. No issues..(Got the URL link from function module)
                   2. After opening the approval page when i click URL link, when i click the reject button-- i am getting the error "The following Error Text was processed in the system GR2."Access via NULL object reference not possible"
                   3. How to proceed the this URL link without error .. the URL link is
    https://abd00093.de.abb.com:8200/sap(bD1lbiZjPTIwMA==)/bc/bsp/sap/zhrrcf_approval/application.bsp?objid=50003421&otype=NB&plvar=01&requestdate=20090121&requestedRsnCode=01&requestedstatus=1&requester=USRECRUITER1&SAPWFCBURL=https%3a%2f%2fabd00093%2ede%2eabb%2ecom%3a0000000000008200%2fsap%2fbc%2fwebflow%2fwshandler%3f_sapwiid%3d000000018491%26_saptask%3dTS51807979%26_saplogsys%3dGR2CLNT200%26_sapuname%3dLINEMANAGER%26_saplangu%3dE%26sap-client%3d200
    ( I got this URL directly using my own function module.. In this function Module i was not getting the SAPGUID -- the error is because of that i am not sure..)How to get this sapguid dynamically..
                    Please guide me to proceed this req asap..
    I am waiting for your reply ....Please
    Thanks and Regards
    Mohan,P

    Please have BPEL loggers both at domain and system level to DEBUG mode. Set all loggers to DEBUG as you are interested to see the entire sequence flow..however, some loggers give you unnecessary info ;/ apart from cube, activation, delivery, dispatch, persistence.
    Added to this, you might want to try SOAPUI, Fiddler, HTTP Analyzer.

  • How to display a text in a string as a link??

    Hi All,
    I am displaying a string in one of the column in my datagrid. I have to search for a specific text in the string and if it is there i have to display it as a link/linkbutton/button or anything which user can click.
    E.g
    String displayed in the datagrid column is "My Name is Pratik" and if text "Pratik" is found, i have to display "Pratik" as a link which user can click.
    How can i achieve this??
    Thanks

    If you want your text to be read-only, you can use the RichText component instead of TextArea. Search for Text Layout Framework for more info on how to mark up your text.

  • How to display links in the main page

    Here is a simple question from an EP beginner-
    I am working on a demo EP site for our company (EP 6.0 SP9).  After the user logs onto the Portal, I want to display a main page with standard Header and Nav bars, and then (in the inner page?) display a list of links to iViews.  The iViews are SAP transaction iViews and url iViews, most of which I have already created and they work fine in preview mode.
    The question is, how to I modify the main page to display the links and maybe a company logo?  Is this an addition to the framework page or something completely different?  In a previous life I created ASP/HTML/javascript pages so coding would not be a problem.
    Thanks in advance,
    Alan

    Hi Alan,
    If u want to display the iviews to a user you want to create  roles.
    First Create all the required iviews,then create pages. Add the iviews to the page. Create workset and add page to the work set. Then create roles and add the workset to the roles. Dont forget to set the Entry point property of role to YES.
    Go to User admin>> select the user to whom u want to show the iviews and assign the role u created to the user.
    Then log in as that user. The iviews will be displayed to the user.
    Regards
    gEorgE

  • How to display message in Ajax Model pop-up extender/overlay on click of a link button

    I am dynamically create the link button using reapeter control and each link assign to different type of content.i want to show the content in  a overlay / Ajax modal pop-up extender. ( Content Type: Video/PDF/Text).
    I need to know how to display the content in overlay/Modal pop-up on click of the link button.

    Hi,
    According to your description, my understanding is that you want to display the content of Video/PDF/Text in a pop-up dialogue when clicking the link button.
    I suggest you can use the Jquery media plugin to open the file content in a pop up dialogue.
    Here is a detailed code demo for your reference:
    Jquery: Open PDF File in browser with Modal Popup using Jquery Media Plugin
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How do I get the top links in the search results page to display the folder?

    In the search results page, if you click on the top link from each result, it only brings up the description. Not much use as a link, so was wondering how you display the folder from this link.

    Is this for the general public or just for you?  If it is for the general public then insert this code at the top of the page:
    <TITLE>---</TITLE>
    <META HTTP-EQUIV="Pragma" CONTENT="no-cache">
    </HEAD>
    And also at the end of the file after the closing body tag:
    </BODY>
    <HEAD>
    <META HTTP-EQUIV="Pragma" CONTENT="no-cache">
    </HEAD>
    </HTML>
    It is unorthodox but it works.

  • How to display link content on the the same sharepoint page on click event

    "How to display link content on the the same sharepoint page on click event"
    Detail:
    we are using a document library where all html files are stored/uploaded.  we would like to display/open the html file on the same sharepoint page where all the files are listed.
    Thanks.

    Use jQuery and set the target to self to the anchor tag
    Regards,
    Sairam Avacorp Technologies

  • How to display archive link picture in pdf

    Hi, Experts
      I create a pdf form using tcode SFP, and create a graphics element in the form,
    but i don't want to use the MIME object to disaplay,because our pictures are archive link.
    How to display archive link picture in pdf form?
    Thanks you very much!
    Ken.li
    Edited by: Ken.Li on Nov 17, 2009 3:50 AM
    Edited by: Ken.Li on Nov 17, 2009 4:30 AM

    Hello,
    I can recommend you go through the tutorial called How Tou2026 Integrate ADOBE form on WebdynPro for ABAP and Deploy it on portal by Bhawanidutt Dabral. Ignore the fact it uses WD, I have tried the proposed solution how to load in the picture on a simple offline/ print form. Look around for this tutorial.
    It propose to use the FM as follows:
    CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
        EXPORTING
          p_object       = c_graphics
          p_name         = lv_pernr1
          p_id           = c_bmap
          p_btype        = c_bcol
        RECEIVING
          p_bmp          = ls_z_if_test_cv-im_photo
        EXCEPTIONS
          not_found      = 1
          internal_error = 2
          OTHERS         = 3.
    It passes the picture as XSTRING into the form and there you bind this data stream to a Image Field (not an Image!!! check this twice). Don´t forget to check the checbox to include picture data into the form file.
    Hope this helps, Otto

Maybe you are looking for