How to display all authentication providers when creating a new user?
I have configured active Directory with weblogic 10.3.1. Users and groups display correctly under the users and groups tab. When creating a new user only the defaultauthenticator provider is displayed in the drop-down selection. How do I get my active directory authenticator to display here also for selection?
I'm confident that the Active Directory provider is read-only. You could write your own Authentication Provider for AD that supports create/update/delete functionality, but it is not included in the out of the box AD Authentication Provider to my knowledge.
I know both the Default Authenticator and the database authenticator are read/write.
Similar Messages
-
Error when creating a new user
Hi all
When I try to create a new user I'm getting an error message Unknown message (ID = LOWERCASE_REQUIRED)
I entered all the required fields in the way it was defined and still I get this error.
I never had this problem before. Can anyone please help me with this issue.
Thanks
regards
LukeHi
Go to visual admin >> services >> UME Provider >> check the property default value is for ume.logon.security_policy.userid_lowercase
Hope it solve the problem
Cheers
Jawahar Govindaraj
PS:Reward pts -
Error when creating a new user in Data Federator XI 3.0
Hi there,
I am completely new to Data Federator so please bear with me.
I have successfully created a new user but I am not able to run the command:
GRANT EXECUTE ON PROCEDURE executeUpdateNativeQuery TO user1
as I get the following error: Incorrect procedure name: 'executeUpdateNativeQuery' (Error code: 10000)
I am following page 482 of the Data Federator User Guide.
Thanks!
Jason>
Jason Hattrick wrote:
> I am completely new to Data Federator so please bear with me.
>
> I have successfully created a new user but I am not able to run the command:
>
> GRANT EXECUTE ON PROCEDURE executeUpdateNativeQuery TO user1
>
> as I get the following error: Incorrect procedure name: 'executeUpdateNativeQuery' (Error code: 10000)
>
> I am following page 482 of the Data Federator User Guide.
>
> Thanks!
> Jason
Hi Jason
There is a typo in the documentation, the name of the procedure is:
executeNativeUpdateQuery
By the way, you can get the full procedure list by entering the following query in the administrator
SELECT * FROM leselect.system.procedures
Hope this helps,
Fred -
Had to create a new AppleId because the old one that I had was linked to my daughters IPhone account now that was successful I'm having trouble setting up a new iCloud account under my new apple ID due to it not transferring.
If you have both already been syncing data to the same account and now have merged data, you would have to set up a new account with your new ID, migrate a copy of the data to the new account, then eliminate your daughter's data from your account and vice versa.
To do this, on the phone that will be changing accounts go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The other phone will not be effected by this.) Next, set up the new iCloud account on this phone using the other Apple ID and turn iCloud syncing for for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account. At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the unwanted data (such as deleting your daughter's contacts from your account, and vice versa). These changes will be reflected on each phone. When finished you will have individual iCloud accounts with just your own data on them. -
When create a new user into AD by default permissions also added for share point site
HI
i have a sharepoint farm.
when i create new user in AD, by default below permissions are added to that user,
how its happen ?
site permissions:
View Web Analytics Data
Browse Directories - Enumerate files and folders in a Web site using SharePoint Designer
and Web DAV interfaces.
View Pages - View pages in a Web site.
Enumerate Permissions - Enumerate permissions on the Web site, list, folder, document, or
list item.
List permissions:
View Items - View items in lists and documents in document libraries.
Open Items
View Versions - View past versions of a list item or document.
View Application Pages - View forms, views, and application pages. Enumerate lists.
Use Remote Interfaces
adilHi
yes i dont know how these permissions are added in sharepoint?
how its happen? , even i did not added this user in any sharepoint group or sitepermission
adil -
How to control the shared libs when creating an new OC4J in AS 10.1.3.4
Hi there
I experience some wired behavior in AS 10.1.3.4!
I Have 2 different installation of AS 10.,1.3.4 (Win 2003 server).
When I create an OC4J instance (using the manager) at virtual server 1 I got 28 global libraries
When I create an OC4J instance (using the manager) at virtual server 2 I got 30 global libraries, (+ apache.webservices & oracle.ifs.client )
Why this difference ?
And how to control it?
Note the default instance "Home" has 28 libraries on both servers!!
Why is it sometime possible possible to use <instance>applib for the jar, and sometime I need to create an <instance>\shared-lib\global.libraries\1.0 library ?
Regards HAnsHi there
I experience some wired behavior in AS 10.1.3.4!
I Have 2 different installation of AS 10.,1.3.4 (Win 2003 server).
When I create an OC4J instance (using the manager) at virtual server 1 I got 28 global libraries
When I create an OC4J instance (using the manager) at virtual server 2 I got 30 global libraries, (+ apache.webservices & oracle.ifs.client )
Why this difference ?
And how to control it?
Note the default instance "Home" has 28 libraries on both servers!!
Why is it sometime possible possible to use <instance>applib for the jar, and sometime I need to create an <instance>\shared-lib\global.libraries\1.0 library ?
Regards HAns -
How to display all the under menus options when pressing the main menu on adobe muse?
How to display all the under menus options when pressing the main menu on adobe muse?
How to display all the under menus options when pressing the main menu on adobe muse?
-
When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?
Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button. -
how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.
If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
if ims is {} then return {}
if (length of ims is 1) then return {}
if i < 2 then return rest of ims
if (i = length of ims) then return (items 1 thru (i - 1) of ims)
if i > (length of ims) then return ims -- should be error?
return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
local numitems, ims_shuffled, nextrest, nextpick, i
set numitems to length of ims
if length of ims < 2 then return ims
set ims_shuffled to {}
set nextrest to ims
repeat until nextrest is {}
set i to (random number (numitems - 1)) + 1
set nextpick to item i of nextrest
set beginning of ims_shuffled to nextpick
set numitems to numitems - 1
set nextrest to removeItem(nextrest, i)
end repeat
return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
local imageSel, shuffled, i
tell application "Aperture"
activate
set imageSel to (get selection)
set shuffled to my shuffle_items(imageSel)
set fullscreen to true
if imageSel is {} then error "Please select some images."
repeat with i from 1 to count of shuffled
reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
end repeat
set fullscreen to false
return shuffled
end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
tell library 1
if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
end if
end tell
And to add the images from the shuffled list to the album:
repeat with i from 1 to count of shuffled
duplicate item i of shuffled to album "shuffledAlbum"
end repeat
Regards
Léonie -
Hello all,
When creating a new DPS, should I use the sizes offered by InDesign or the display size of the device? I ran into this question when I was looking up the sizes of different devices and found that iPhone 5s, iPhone5c, and iPhone4s sizes differ than the defauly dimensions offered by InDesign.
Also, should I worry about the ppi resolution? With iPhone, they all seem to be 326ppi but when dealing with other devices is this something that I should take into consideration? Ideally, I could be creating DPS apps for all devices offered in the Digital Publishing drop down in InDesign (iPhone, iPad, Kindle Fire/Nook, and Android).
Thank you for any help you can provide.
By the way, if it helps I am using InDesign CC.Using 1024x768 and creating PDF articles will get you OK with both iPad resolutions, and, as Bob L. says, quite decent "one size fits all" result for all other devices.
-
How can I maintain the classification in UI when creating a new BP?
SAP CRM 2007 (UI)
Hi,
In SAP GUI the classification can be maintained in tab classification.
How can I maintain the classification in UI when creating a new BP?
Thanks for your support.
Regards,
AVHi Anand,
thanks for your prompt answer.
By default all ship-to-parties are assigned to classification Customer. How can we assign a different classification to ship-to-parties in UI? The view Account classification seems to be different from the tab classification in SAP GUI.
Regards,
AV -
How to display All User Logged in time & Logout Time?
How to display All User Logged in time & Logout Time?
Hi..
I want to display All user who logged in the portal,
their username,
their time logged in,
their time logged out..
where can i find these information?
do Portal have already something like this?
Plz advise..Thanks.The login information is in the wwlog_activity_log. The logout action is only logged when it is explicit. I am using the last user action time for the logout time so I can determine the duration of the visit.
-
How to display all tables residing in my database
i'm using 10g express edition.
i'm developing a .net application using oracle
i want display table infomation in a datagrid
for that i need to select tables fromthe database using the interface given by them
in that i found server name field.....what it actually means?
also how to create a new database in 10g and how to display all tables residing in the database?
pls help me
thanking u
chaitanyauser11359516 wrote:
i want display table infomation in a datagrid
select owner||'.'||table_name owner_table_name
from all_tables
user11359516 wrote:in that i found server name field.....what it actually means?i'm not sute what you mean by server name field? if you refer to table column name see this code below:
select owner||'.'||table_name||'.'||column_name table_column_name,
decode(data_type,'VARCHAR',data_type||'('||to_char(data_length)||')',
'VARCHAR2',data_type||'('||to_char(data_length)||')',
'NUMBER',decode(data_scale,0,data_type||'('||to_char(data_precision)||')',
null,data_type,
data_type||'('||to_char(data_precision)||','||to_char(data_scale)||')'),
data_type) type,
nullable
from all_tab_cols
order by table_name, column_id -
ADF how to display a processing page when executing large queries
ADF how to display a processing page when executing large queries
The ADF application that I have written currently has the following structure:
DataPage (search.jsp) that contains a form that the user enters their search criteria --> forward action (doSearch) --> DataAction (validate) that validates the inputted values --> forward action (success) --> DataAction (performSearch) that has a refresh method dragged on it, and an action that manually sets the itterator for the collection to -1 --> forward action (success) --> DataPage (results.jsp) that displays the results of the then (hopefully) populated collection.
I am not using a database, I am using a java collection to hold the data and the refresh method executes a query against an Autonomy Server that retrieves results in XML format.
The problem that I am experiencing is that sometimes a user may submit a query that is very large and this creates problems because the browser times out whilst waiting for results to be displayed, and as a result a JBO-29000 null pointer error is displayed.
I have previously got round this using Java Servlets where by when a processing servlet is called, it automatically redirects the browser to a processing page with an animation on it so that the user knows something is being processed. The processing page then recalls the servlet every 3seconds to see if the processing has been completed and if it has the forward to the appropriate results page.
Unfortunately I can not stop users entering large queries as the system requires users to be able to search in excess of 5 million documents on a regular basis.
I'd appreciate any help/suggestions that you may have regarding this matter as soon as possible so I can make the necessary amendments to the application prior to its pilot in a few weeks time.Hi Steve,
After a few attempts - yes I have a hit a few snags.
I'll send you a copy of the example application that I am working on but this is what I have done so far.
I've taken a standard application that populates a simple java collection (not database driven) with the following structure:
DataPage --> DataAction (refresh Collection) -->DataPage
I have then added this code to the (refreshCollectionAction) DataAction
protected void invokeCustomMethod(DataActionContext ctx)
super.invokeCustomMethod(ctx);
HttpSession session = ctx.getHttpServletRequest().getSession();
Thread nominalSearch = (Thread)session.getAttribute("nominalSearch") ;
if (nominalSearch == null)
synchronized(this)
//create new instance of the thread
nominalSearch = new ns(ctx);
} //end of sychronized wrapper
session.setAttribute("nominalSearch", nominalSearch);
session.setAttribute("action", "nominalSearch");
nominalSearch.start();
System.err.println("started thread calling loading page");
ctx.setActionForward("loading.jsp");
else
if (nominalSearch.isAlive())
System.err.println("trying to call loading page");
ctx.setActionForward("loading.jsp");
else
System.err.println("trying to call results page");
ctx.setActionForward("success");
Created another class called ns.java:
package view;
import oracle.adf.controller.struts.actions.DataActionContext;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.model.generic.DCRowSetIteratorImpl;
public class ns extends Thread
private DataActionContext ctx;
public ns(DataActionContext ctx)
this.ctx = ctx;
public void run()
System.err.println("START");
DCIteratorBinding b = ctx.getBindingContainer().findIteratorBinding("currentNominalCollectionIterator");
((DCRowSetIteratorImpl)b.getRowSetIterator()).rebuildIteratorUpto(-1);
//b.executeQuery();
System.err.println("END");
and added a loading.jsp page that calls a new dataAction called processing every second. The processing dataAction has the following code within it:
package view;
import javax.servlet.http.HttpSession;
import oracle.adf.controller.struts.actions.DataForwardAction;
import oracle.adf.controller.struts.actions.DataActionContext;
public class ProcessingAction extends DataForwardAction
protected void invokeCustomMethod(DataActionContext actionContext)
// TODO: Override this oracle.adf.controller.struts.actions.DataAction method
super.invokeCustomMethod(actionContext);
HttpSession session = actionContext.getHttpServletRequest().getSession();
String action = (String)session.getAttribute("action");
if (action.equalsIgnoreCase("nominalSearch"))
actionContext.setActionForward("refreshCollection.do");
I'd appreciate any help or guidance that you may have on this as I really need to implement a generic loading page that can be called by a number of actions within my application as soon as possible.
Thanks in advance for your help
David. -
How to display all the questions of a survey in a page?
How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
sinduHi,
To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
About how to add a hyperlink into a page:
http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
Feel free to reply if there is still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support
Maybe you are looking for
-
IPhone 5S cannot make purchase with App Store (login issue)
Ok - I am rather irritated. I tried to purchase a 99 cent app, and upon tapping the purchase button, the App Store insisted that I enter my Apple ID password (what happened to using your fingerprint, which worked when I bought the phone?). Ok - so
-
PREREQUISITE FOR PURCHASE ORDER MASS MAINTENENCE
Dear Experts, Please explain the prerequisite points for the purchase order Mass Maintenance. i want to set Delivery completed indicator for the open purchase orders. is it prerequisite for setting the deletion flag to the purchase order items. if de
-
Problem in badi CRM_CUSTOMER_H_BADI
Hi, I've the below problem when I am trying to get the et_orderadm_i calling the FM CRM_ORDER_READ. My FM CALL FUNCTION 'CRM_ORDER_READ' EXPORTING it_header_guid = lt_h_guid IMPORTING et_orderadm_i
-
Installing Solaris 8 with a NVIDIA RIVA TNT MODEL 64 video board
I'm trying to find out if anybody knows of any compatible drivers for the NVIDIA RIVA TNT MODEL 64 video board for Solaris 8. I can install Solaris using 640 x 480 with 16 colours, and that works without any problem, but the installation does not see
-
How do I write on documents sent to me so I can edit them?
How do I edit documents sent to me?