How to display all available data for KFs from different Cubes

Hi,
I am using a MultiProvider that consists of two InfoCubes. KF1 uses Cube1, KF2 uses Cube2 - characteristic Country exists in both cubes. I have the following data:
KF1 - Country 1: 5
KF1 - Country 3: 8
KF1 - Country 4: 10
KF2 - Coutnry 1: 9
KF2 - Country 2: 7
KF2 - Country 5: 3
I have a query that uses Country as a drilldown characteristic (ROWS) and displays the values of KF1 and KF2 (COLUMNS) for each Country. However, instead of seeing data for Countries 1-5 I only see data where I have results for KF1 (Countries 1,3 and 4). The value for Country 1 for KF2 shows up correctly in the corresponding row, but Countries 2+5 aren't displayed for KF2. If I change the Access Type for Result Values from "Posted Values" to "Master Data" I get the correct result. However this is not feasible in the final setting due to the amount of data that has to be handled (MasterData setting will lead to crashes of the query due to maximum number of cells exceeded).
Are there any other options to force the query to display values for all characteristic values where I have data for any KF?
Thanks a lot for your help!
Best regards,
David

As it turned out the issue was due to 2 restrictions on KPI2:
1) Restriction to InfoProvider "Cube 2"
2) Constant selection on two characteristics that have filters on a global level but which should not affect the display of the data for KF2
Removing (1)+(2) provided the desired result.

Similar Messages

How to transfert all my data and config from 4 to 4s

Hello,
Is there a "step by step" doc. On how to transfert all my data and config
From one iphone 4 to a 4s without using outlook ( ex:for contacts ) etc...
I don't get the ITunes method, sync direction etc...
All my Iphone 4 Put into my knew Iphone 4 S within a click !
Maybe there's an app for that :-).
Thanks for the Help.

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

How to view all available Infotypes for HR ?

Hi All,
I want to view all available infotypes for HR in SAP GUI.
What is the transaction code for this?
OR
What are the steps to carry out?
Thanks.

Hi Tiruna,
Click-->
http://help.sap.com/saphelp_erp2005/helpdata/en/a0/524035634df01ee10000009b38f889/frameset.htm
You wii see all what you need.
Good kuck, Massimo

How to list all available tables for user "karl"

How can I list all available tables (=table names) for user "karl"?
Nice to have would be if (after each table name in another column of each row) the number of data rows in this table can be listed similar to:
TABLE NUM ROWS
TESTA 12
TESTB 3455
ANOTHERTAB 234
How can I do this?

from Laurent Schneider
http://laurentschneider.com/wordpress/2007/04/how-do-i-store-the-counts-of-all-tables.html
SQL> select
2    table_name,
3    to_number(
4      extractvalue(
5        xmltype(
6 dbms_xmlgen.getxml('select count(*) c from '||table_name))
7        ,'/ROWSET/ROW/C')) count
8 from user_tables;
TABLE_NAME                      COUNT
DEPT                                4
EMP                                14
BONUS                               0
SALGRADE                            5

How to retrive all available disk drive ID from windows OS??

I plan to design a "file chooser" by myself because
the one provided by JDK1.3 has a serious bug:
when the signed applet open a file chosser, the program will crash.
I want to list all available disk drive ID.
Does anyone know how to do this??
Thanks

My guess is that you will have to implement a native call. Check out the Windows function GetLogicalDrives()

How to display all PO data in the PDF form?

Hi,experts,
I create a WDJ application with the PDF form for print all PO sheet.
I can transfer all data from WDJ to PDF form.
I need continuous print all PO sheet that include header and items.
After I run the application, I found only the one PO header and one items in the PDF FORM.
I think the config of the adobe form is error.
The version of the adobe livecycle designer is 7.1.
Do you give me some hint?
Best regards,
tao

Hi, Chintan,
Thanks a lot for your reply so quickly.
I have check the config of the "Repeat Row for each item" according your word.
I change the checkbox of the "Repeat Row for each item" for the PO items, and the PO items is ok after I run the application.
But the pdf is only one PO sheet, not all PO sheet.
I found the checkbox of the "Repeat Row for each item" is unabled in the HEADER subform. I think it is the cause for the problem.
But I don't know how to enable the HEADER subform because the check box of the "Repeat Row for each item" is unable in the subform of the header.
Do you give me some hint? Thanks a lot for your help!!!!!
Best regards,
tao

How to occupy all available space for a table

I have a page fragment as shown below.
Panel Group Layout - Scroll
- Panel Header
--- query component
--- spacer
--- Panel Collection
---- ADF Readonly Table
I put this region in a jspx file like this
Panel Stretch Layout
- center contains region
Obviously table does not occupy all the available space as there is no AutoHeightRows setting on table, and Panel Group Layout and Panel Header will not stretch it's children. It seems like there is no option to achieve this with ADF layout components.
Chandresh

Chandresh,
For a faster response either reply in one of the pattern threads or, if the question does not apply specifically to one of the functional patterns, the post to the JDeveloper and ADF forum.
It is not clear exactly what your question is. However, if I guess correctly, something like the following is desired?
Remove Panel Group Layout - Scroll from the fragment. Add the Panel Stretch Layout as the outer layout component of the fragment. When a Named Criteria Data Control is dropped into the Top facet of the Panel Stretch Layout, a Panel Group Layout and Panel Header are added automatically.
For the top facet of the Panel Stretch Layout, set the height to something that will show all of the search fields. This depends on the number of columns you have. Set the other facets to auto.
Add the Panel Collection containing the table to the Center facet of the Panel Stretch Layout.
Add the fragment to a taskflow.xml file and that file to the jspx file as desired. That should get close to what you want.

Portal not displaying all the data for transaction

hi we have a transaction called s_alr_86012326 in the gui...
when we execute the transaction in the gui we can see a lot of data but i am not able to see besides 1 entry thru the portal. any idea why?
besides this there is one more issue...
when i log in with the test id from one another system i am not able to see the iview itself..what happens is that it presents a dialogue box aas the new window opens and prompts me to save a file or cancel it... the file got a strange extension

Hello Ankur,
The Pop Up is coming because you don't have SAP Logon Pad (SAP GUI) installed in that computer. Just installed it and the pop up will go.
Regarding the transaction not displaying data, check ur authorization in backend i.e. check the authorization of the user to which ur portal user is mapped.
Regards
Deb
[Reward Points for helpful answers]
null

How to get all available VM OS details from my Hyper-v-host?

HI,
I have one VM Server in my windows 8 machine, in that I have 2 vm'. Now I want to find alll vm's os detials?
Thanks in advance.
A Pathfinder.
If a post answers your question, please click "Mark As Answer" on that post and "Mark as Helpful"
Best Online Journal

or
get-vm LapVM1 | select *
Read more at:
Hyper-V Cmdlets
Mike Crowley | MVP
My Blog --
Planet Technologies

How to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

how to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

Hi kdm,
please stick in one thread for the same topic!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How To Display All Comments for a Planning Package

Hi,
I have the How-to guide mentioned in the subject and have now moved onto BI7. Is the guide still applicable in BI7 and how would I go about implementing the above How-to in IP instead of BPS?
Thanks,
Ale

Thanks Marc.
I will use BW-BPS for the time being as I've seen screenshots of the solution in the how-to. Still need to answer the question here:
How To. Display All Comments for a Planning Package
As I have no idea how to achieve the functionality detailed in the thread above.
Thanks for your time Marc,
Regards,
Ale

NOT WORKING -How To Display All Comments for a Planning Package

Hi All,
I am using How to Document "How To Display All Comments for a Planning Package" to display comments for list of "cost center" against different "fiscal/year" for Key Figure "Budget Amount".
Below is how the Layout looks like where comments are posted against Cost Center- year combination.
Cost Center                          2007     2008     2009     2010     2011
3          2.00     2.00     2.00     2.00     2.00
4          2.00     2.00     2.00     2.00     2.00
6          2.00     2.00     2.00     2.00     2.00
7          2.00     2.00     2.00     2.00     2.00
This case is very similar to the example given in how to document but after following all the steps correctly in the document and also followings various forum links such as below , I am not able to display the comments for list of Cost Centers.
"How to...BSP display comments"...problem with row comment
Below are the issues being faced:
1) When i save the comments , the icon for comments (indicating that some comments have been entered) is not shown against selection of Cost Center-Year although the comment is saved.Comment are also visible in BPS0.
2) On execution "Web interface could not be loaded" - is the message that is shown in the area where BPS application should show all the comments.
Highly Appreciate any help with issues mentioned above.
Kind Regards,
Robin Johri

Hello Robin,
1) please check if you set the row/cell selection property correctly for the layout component in the web interface.
2) the error does not make sense since the comments are displayed in an iframe using a BSP application, not a web interface. Check the URL in the HTML text component.
Regards,
Marc
SAP Techology RIG

How to display webdynpro view data in PDF format.

Dear All,
Greetings!!!
scenario :
i am having five tabstrips in a table , first four for the different kinds of data
and fifth one is for to display all tabstrips data in a PDF format.
Kindly let me know how to acheive this .
is it possible with out ADLC..? any demo or article is available for similar requirement?
Thanks in Advance.
Best Regards,
Kranthikumar Palle.

It's better to use the Adobe form to display your WD data. But you can choose Smartform as a PDF doc to display the WD data.
Check out the thread [Display a Smartform as PDF document in WD ABAP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785] for more details.

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

Display All Marked / Flagged for Follow Up Emails Separately

Display All Marked / Flagged for Follow Up Emails Separately
I was wondering, is there actually a way to display flagged emails in some sort of folder or separate view at least, as it is common within desktop mail applications and any other user interfaces from free email providers like Gmail, Yahoo!, or AOL and the likes?
It's very complicated and not very user friendly to mark an email for follow up, because you need to decide at what point in the future you want to be reminded. When that day arrives and you're not ready to reply yet, you will have to go through each follow up email again and repeat those steps to re-mark them for a later date. And that is really annoying. Or am I missing something here?
Can't I just simply mark my emails, like, star them in order to review them later and to be able to have a look at them from time to time, just like it is possible in other applications or in your browser?
I have noticed that there is an option to star an email within a Gmail account, but I'm not quite convinced that they sync both ways properly anyway. Also, that feature doesn't come with all email services. For example, how would I star an email in my AOL account?
I understand that BlackBerry is not based on IMAP and therefore has its limitations, however, it would be nice if there was another solution for this, or an explanation at least. It's simply impossible to go through hundreds and thousands of emails in order to find a flagged email.
It's already a pain that the emails themselves won't sync (read/unread) with your desktop and other devices, but do you have any advice or workaround to improve the synchronization of flagging or starring?
I have been using BlackBerrys for many years now, and I really still enjoy them, but the fact that it isn't based on IMAP is a big downside and no longer up to date. Times really have changed.
Another thing: When I mark as follow up, the default time always seems to be 5 p.m. -- probably because the calendar day starts at 9 AM and ends at 5 PM by default. I thought changing the "day ends" option would do the trick and also change the default time for the reminder, unfortunately it isn't. Is there another way to change that, or will I have to set the time manually every time?
Your help is very much appreciated.

Display All Marked / Flagged for Follow Up Emails Separately
I was wondering, is there actually a way to display flagged emails in some sort of folder or separate view at least, as it is common within desktop mail applications and any other user interfaces from free email providers like Gmail, Yahoo!, or AOL and the likes?
It's very complicated and not very user friendly to mark an email for follow up, because you need to decide at what point in the future you want to be reminded. When that day arrives and you're not ready to reply yet, you will have to go through each follow up email again and repeat those steps to re-mark them for a later date. And that is really annoying. Or am I missing something here?
Can't I just simply mark my emails, like, star them in order to review them later and to be able to have a look at them from time to time, just like it is possible in other applications or in your browser?
I have noticed that there is an option to star an email within a Gmail account, but I'm not quite convinced that they sync both ways properly anyway. Also, that feature doesn't come with all email services. For example, how would I star an email in my AOL account?
I understand that BlackBerry is not based on IMAP and therefore has its limitations, however, it would be nice if there was another solution for this, or an explanation at least. It's simply impossible to go through hundreds and thousands of emails in order to find a flagged email.
It's already a pain that the emails themselves won't sync (read/unread) with your desktop and other devices, but do you have any advice or workaround to improve the synchronization of flagging or starring?
I have been using BlackBerrys for many years now, and I really still enjoy them, but the fact that it isn't based on IMAP is a big downside and no longer up to date. Times really have changed.
Another thing: When I mark as follow up, the default time always seems to be 5 p.m. -- probably because the calendar day starts at 9 AM and ends at 5 PM by default. I thought changing the "day ends" option would do the trick and also change the default time for the reminder, unfortunately it isn't. Is there another way to change that, or will I have to set the time manually every time?
Your help is very much appreciated.

How to display all available data for KFs from different Cubes

Similar Messages

Maybe you are looking for