How to display all incorrect records in PSA

Hello,
Is there a shortcut to display all the incorrect records in PSA. I am aware of a particular value that has been posted incorrectly and we're pulling over a million records from R/3. Each time i run the update, it fails due to the same data value error. This is prod env and i'm running delta init after a transfer rule change.
Pls. help.
Malli

Hi malli
I was facing the same problem. But i just asked my end user to make the changes in his data entry so that there were no errors while extraction itself.
One more thing what you can do if u know the exact data error is to write one select statement on the PSA table where the condition is the error what ur facing daily. There are no other shortcuts to see a error record in PSA unless untill u face problem while updating the data target. in that case the record in PSA will be in in status red and you can filter for this record.
Hope i made certain things clear. Please post if u r not convinced.
Regards
Sriram

Similar Messages

How to display all the Records of all the "Books of Business" in Report ?

Hello,
I have a user with 3 "Books of Business" (No Sub Books).
I would like to generate a report with the data of the 3 books.
With the "selector", it seems that I can't choose the "All" option.
Can someone confirm the behavior ?
Thanks for your help.

Hello,
I do have a similar problem.
I have already tried to create a parent book (the checkbox "can contain data" is not activated), assign it to sub-books and add first my user as a book user (Admin role). However, when I start a simple report which should show e.g. Number of Contacts in a book an choose the parent book in the book selector I get an error message and there are no results ("The specified criteria didn't result in any data").
Did I miss any setup steps or is not possible to see all the records at once which belong to the sub-books with a parent book?
If I pick my user book, I see only the records I own. The problem is that our CEO needs a view there he could see records in sub-books separately but also the records in both of them at once. Unfortunately, the Manager Visibility can not be applied because we have a different hierarchy in the system as it is in real (otherwise wrong data in forecasts).
Many thanks in advance
Regards, Vilma

How to display All the rows in a Table

Hi All,
Our requirement is, we need to display all the records of an VO in a table. We should not have navigation bar with previous and next. Runtime only will come to know how many records the VO has. Is it possible to achieve our requirement using setNumberOfRowsDisplayed() method in OATableBean ?

Do u want to do it declaratively or programmatically.
Declaratively You can set no of rows property of table bean. If u want to set it programmatically then u can do it as discussed in the thread..
Regards,
Ram

How to display the NULL records by multiple XMLTABLE()

First, let me provide the testing data of INSERT and CREATE TABLE sql:
create table xml_t2 (xml_raw XMLTYPE);insert sql, a bit long.....just copy and paste then run it will be OK!
the system warns: Your message exceeds the maximum length of 30000 characters.
So, I place it on the mediafire shariing space
http://www.mediafire.com/?npmot6lgl86dgliTesting SQL:
SELECT t1.years, t1.months,t1.days,t1.hours,t1.value,t2.value
        FROM xml_t2,
        XMLTABLE ('$d/cdata/F1' passing xml_raw as "d" COLUMNS years integer path '//year', months varchar(3) path '//month', days varchar(2) path '//day', hours varchar(2) path '//hour', mins varchar(2) path '//minute', value float path '//value') t1 ,
        XMLTABLE ('$d/cdata/F2' passing xml_raw as "d" COLUMNS years integer path '//year', months varchar(3) path '//month', days varchar(2) path '//day', hours varchar(2) path '//hour', mins varchar(2) path '//minute', value float path '//value') t2The condition for now is....In the xml data, I have deleted the month 'Jan' with <F2>tag which is in 2010.
That mean the output of XMLTABLE t2 will not contain the 'Jan' records but it is still remain in XMLTABLE t1.
The problem is that when I use the above SQL to show the t1.value, it will not display the t1.value in 2010 Jan.....it just skipped 'Jan' and becomes 'Feb'...
what i would prefer to display is something like this:
YEARS MONTHS DAYS HOURS t1_value t2_value
2009     Jan    01   01       8       8
2009     Jan    01   02       8     580
2009     Jan    02   01     580     580
2009     Jan    02   02     580     580
2009     Feb    01   01     440     440
2010     Jan    01   01     627     NULL
2010     Jan    01   02     627     NULL
2010     Jan    02   01     367     NULL
2010     Jan    02   02     367     NULL
2010     Feb    01   01     367     849
2010     Feb    01   02     849     849
..............So...the main problem is how to display back the record in JAN in 2010 in t1 XMLTABLE and assign null to the t2 XMLTABLE since it doen't contains this months record.
THANKS for help!!

Hi,
What's your database version?
Are you using binary XML storage? (This is the default in 11.2.0.2)
If not you have to explicitely specify it :
create table xml_t2 (xml_raw XMLTYPE)
xmltype column xml_raw store as securefile binary xml;Along with object-relational, it's the best storage strategy to use in conjunction with XMLIndex.
You should also use a structured XML index instead, it's more appropriate than the unstructured index you're currently using :
create index xml_t2_sxi on xml_t2 (xml_raw)
indextype is xdb.xmlindex
parameters (q'#
XMLTABLE xml_t2_xt '/cdata'
COLUMNS
YEARS INTEGER    PATH 'F1/name/year',
MONTHS VARCHAR(3) PATH 'F1/name/month',
DAYS   VARCHAR(2) PATH 'F1/name/day',
HOURS VARCHAR(2) PATH 'F1/name/hour',
MINS   VARCHAR(2) PATH 'F1/name/minute',
VALUE FLOAT      PATH 'F1/name/value',
VALUE2 FLOAT      PATH 'F2/name/value'
call dbms_stats.gather_table_stats(user, 'XML_T2');Use the query provided by Stew and check the explain plan, you'll see the difference.

How to display All User Logged in time & Logout Time?

How to display All User Logged in time & Logout Time?
Hi..
I want to display All user who logged in the portal,
their username,
their time logged in,
their time logged out..
where can i find these information?
do Portal have already something like this?
Plz advise..Thanks.

The login information is in the wwlog_activity_log. The logout action is only logged when it is explicit. I am using the last user action time for the logout time so I can determine the duration of the visit.

How to display all tables residing in my database

i'm using 10g express edition.
i'm developing a .net application using oracle
i want display table infomation in a datagrid
for that i need to select tables fromthe database using the interface given by them
in that i found server name field.....what it actually means?
also how to create a new database in 10g and how to display all tables residing in the database?
pls help me
thanking u
chaitanya

user11359516 wrote:
i want display table infomation in a datagrid
select owner||'.'||table_name owner_table_name
from all_tables
user11359516 wrote:in that i found server name field.....what it actually means?i'm not sute what you mean by server name field? if you refer to table column name see this code below:
select owner||'.'||table_name||'.'||column_name table_column_name,
       decode(data_type,'VARCHAR',data_type||'('||to_char(data_length)||')',
                        'VARCHAR2',data_type||'('||to_char(data_length)||')',
                        'NUMBER',decode(data_scale,0,data_type||'('||to_char(data_precision)||')',
                                                  null,data_type,
                                                  data_type||'('||to_char(data_precision)||','||to_char(data_scale)||')'),
                        data_type) type,
                        nullable
from all_tab_cols
order by table_name, column_id

How to display only one record.

Hi Gurus,
Here my requirement is i have 2 pages.
first page having project_number lov,create and tableRN.
once u select the projectnumber and click on the create button it is navigate to secound page,here enter the data and click on the submit button it ll insert into database table and navigate to fitst page and display the data in tableRN what ever u insert the data(this part is over).
but the problem is, in tableRN displays all the records(previous records also displayed)
my requirement is display only one record(click on the submit button at the time of record only).
Plz help me
its very urgent.
Thanks
Seshu.
Edited by: its urgent on Jan 3, 2012 10:52 PM

Seshu,
Do u want to display the inserted row...
Regards,
Gyan
www.gyanoracleapps.blogspot.com
www.querenttech.com

How To Display All Comments for a Planning Package

Hi,
I have the How-to guide mentioned in the subject and have now moved onto BI7. Is the guide still applicable in BI7 and how would I go about implementing the above How-to in IP instead of BPS?
Thanks,
Ale

Thanks Marc.
I will use BW-BPS for the time being as I've seen screenshots of the solution in the how-to. Still need to answer the question here:
How To. Display All Comments for a Planning Package
As I have no idea how to achieve the functionality detailed in the thread above.
Thanks for your time Marc,
Regards,
Ale

How to display all the questions of a survey in a page?

How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
sindu

Hi,
To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
About how to add a hyperlink into a page:
http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
Feel free to reply if there is still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

NOT WORKING -How To Display All Comments for a Planning Package

Hi All,
I am using How to Document "How To Display All Comments for a Planning Package" to display comments for list of "cost center" against different "fiscal/year" for Key Figure "Budget Amount".
Below is how the Layout looks like where comments are posted against Cost Center- year combination.
Cost Center                          2007     2008     2009     2010     2011
3          2.00     2.00     2.00     2.00     2.00
4          2.00     2.00     2.00     2.00     2.00
6          2.00     2.00     2.00     2.00     2.00
7          2.00     2.00     2.00     2.00     2.00
This case is very similar to the example given in how to document but after following all the steps correctly in the document and also followings various forum links such as below , I am not able to display the comments for list of Cost Centers.
"How to...BSP display comments"...problem with row comment
Below are the issues being faced:
1) When i save the comments , the icon for comments (indicating that some comments have been entered) is not shown against selection of Cost Center-Year although the comment is saved.Comment are also visible in BPS0.
2) On execution "Web interface could not be loaded" - is the message that is shown in the area where BPS application should show all the comments.
Highly Appreciate any help with issues mentioned above.
Kind Regards,
Robin Johri

Hello Robin,
1) please check if you set the row/cell selection property correctly for the layout component in the web interface.
2) the error does not make sense since the comments are displayed in an iframe using a BSP application, not a web interface. Check the URL in the HTML text component.
Regards,
Marc
SAP Techology RIG

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Hierarchical query - How to get all parent records - Duplicate post

Hi,
In Oracle, START WITH, CONNECT BY commands will give all the direct and indirect child records. Other way round, is they are command which gives all the parent records till the root? Please let me know. I am working on Oracle 9i Release 2.
Thanks a lot for your help.
Edited by: skv on Nov 21, 2008 11:05 AM

Duplicate post.
Hierarchical query - How to get all parent records
Please edit this post heading to duplicate post.
Regards.
Satyaki De.

Creating BOM using BDC :How to display no of records from flat file under

Hi,
      How to display no of records from flat file under one (Alternative BOM) vertically.
    When i execute, the records are replacing one by one.
Here my coding:
report ZBOM1
       no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
      END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
       idnrk(18),
       MENGE(18),
       MEINS(3),
       postp(1),
      END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data: ibdcdata type standard table of bdcdata WITH HEADER LINE.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
the BDCDATA structure must be fnam, fval,dynbegin,dynpro,program.
You have to declare like this and pass this in your CALL TRANSACTION statement.
Please give some other table name for BDCDATA you declared for and also for IBDCDATA.

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

In background how to display all fields using reuse_alv_list_display

Hi all,
        I have output table with 100 fields,when i ran in background its giving the output with out alignments,how to make the whole record in a single line,presently it displays each record in a 3 rows,please help me
thanks
Sriman

Hi,
   In fore ground it displaying all columns but when i ran in background its giving all fields but the each record contains rows,i need to make it as single line
the code i have written for this is.
for background is there any parameter to add for this code.help me
ls_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = repid
      it_fieldcat        = it_fieldcat
     it_events          = events_b
      is_layout          = ls_layout
    it_events          = it_events
        is_print           = ls_print
      i_save             = 'X'
    TABLES
      t_outtab           = t_ce1jab1.
thanks
sriman

How to display all incorrect records in PSA

Similar Messages

Maybe you are looking for