How to display chinese word when i logon in EN?

Hi!
I have a report that can upload an excel file using BAPI. Excel file will be extracted to an internal table at first and this excel file will contain chinese characters. When I logon to EN and run the report, I debug the internal table and found that my chinese characters become ????. But if i logon on chinese - ZH, i can see them clearly.
however, for the same report, I tested on my friend's PC (vendor company). He logon to EN as well, but can see the chinese character very clearly.
I check on RZ10, his development server profile has zcsa/system_language = E, zcsa/installed_languages = 12DEMH
My develpment server is zcsa/system_language = E, zcsa/installed_languages = 12DEMZH
My friend as an ABAPer has no idea on how the settings in developemt server work. Did I miss out somethings that disallow me to see the chinese characters in an internal table when i logon in EN?
Can anyone help me to figure out this problem? Thanks a lot!
best regards,
ying ying

Hi!
I know the reason I can't see chinese characters during debugging if I logon to English SAP system.
I should click "Customizing Local Layout" at application bar --> Character Set --> Simplified Chinese. Those chinese characters that appear in ??? while debugging will change to proper chinese characters and uploaded successfully.
If I go to FB03 and see the chinese characters in »áÒéÆÚ¼ä¿§·È·ÑÓÃ, perform the same steps and those weird code will change to proper chinese as well.
Thanks for all the replies and help. It's very appreciated. Thank you very much!
Best regards,
ying ying

Similar Messages

Display chinese words in textbox

Hi All,
I want to display chinese words in textbox ....so i have a page with textbox where i type chinese words and press save button it saves in database numeric code....but when i retrieve that value in textbox from database it does not show same word , it shows numeric code...
so, how can i display chinese words in textbox....
any ideas
Thanks a lot..

textbox which takes text data from user..
<input type="text" value="" id=""/>

Display Chinese Word In Crystal Report's Cross-Tab

Hi all,
I am trying to display chinese word in my cystal report. It can be display correctly in detail, page header or formula. But when come to cross-tab, it just will show some funny symbol on it. any idea?
i am using Crystal report xI release 2.
Thank You
Wong

Hi,
I solve it.Just for your reference, change the font type inside cross-tab.

Cannot Display Chinese Word if pdf preview for PLD layout.

Hi,
I am facing a problem when user pdf preview the pld layout with chinese word, the content will be blank, it will not be displayed. Print preview work fine for chinese wording.
I had tried to change the font to every chinese character through the drop down list, but it still happen the same.
I had check the pdf version, it can display chinese wording that not from SAP.
I had search in the community, but none of them meet my requirement, as most of them happen in crystal report.
Can anyone help? Anyone experience before?
Another thing is, why in the General setting > path, there is no setup for pdf?
Thanks

Hi,
Please refer SAP note for solution:
1406074 - Chinese / Japanese Characters not exported to PDF
Thanks & Regards,
Nagarajan

How to display chinese on Nokia Xpress 5300?

How to display chinese on Nokia Xpress 5300? I have chinese and english songs together in my phone. but the phone cannot display chinese characters. Any solutions?

Sorry, my English is very pool.
1.My source code is edit on windows98SE/Chinese.
2.After compiler, My program can display Chinese on windows.
3.When change os to linux and use KDE, I can see Chinese in source.
4.If not create the "font.***.zh_TW" into /usr/.../lib,
AWT/SWING component can't display chinese.
5.If create the "font.***.zh_TW" into /usr/..../lib,
the AWT component can display chinese and SWING component can't.
6."LC_TYPE" is "zh_TW.Big5" and "LANG"="zh_TW.Big5".
7.If re-complier in linux, The SWING component can't display chinese.
8.When running, The system will display message
"Warning:Cannot covert string "-default-ming-medium-r-normal
-140---c-- big5-0".
9.use command "xlsfonts | grep big5" can find font "-default-ming-...-big5-0".
10.Check the "file.encoding" is "BIG5".

How to display Chinese in AWT (Urgent!)

I have to problems,
My computer is Win2K Traditional Chinese
I try to run an application which Display chinese characters on the component of AWT. Although the application can run and can display correctly, there are exceptions. It throws the following error continuously,
sun.io.UnknownCharacterException
sun.io.UnknownCharacterException
at sun.io.CharToByteISO8859_1.convert(Unknown Source)
at sun.awt.PlatformFont.makeConvertedMultiFontChars(Unknown Source)
at sun.awt.PlatformFont.makeConvertedMultiFontString(Unknown Source)
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
sun.io.UnknownCharacterException
sun.io.UnknownCharacterException
at sun.io.CharToByteISO8859_1.convert(Unknown Source)
at sun.awt.PlatformFont.makeConvertedMultiFontChars(Unknown Source)
at sun.awt.PlatformFont.makeConvertedMultiFontString(Unknown Source)
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
I try to encodes the string as follow, however, it throws another exception
String x = new String("ChineseWordHere".getBytes("ISO-8859-1"), "Big5");
It throws exception:
java.io.UnsupportedEncodingException: Big-5
at sun.io.Converters.getConverterClass(Unknown Source)
at sun.io.Converters.newConverter(Unknown Source)
at sun.io.ByteToCharConverter.getConverter(Unknown Source)
at java.lang.String.getBTCConverter(Unknown Source)
at java.lang.String.<init>(Unknown Source)
at java.lang.String.<init>(Unknown Source)
at Test1.<init>(Test1.java:8)
at Test1.main(Test1.java:13)
Do you know how to solve these two problems??
(The most concern is that how to display Chinese in AWT)
Thanks

For starters, you shouldn't use the 8859 encoding since it only supports single byte representations. You should be able to successfully use UTF-8. Then to actually display the characters...or to type them, make sure you have an input method editor (IME) that supports the language - in theory if you are using a Chinese Win2k, you already have this with windows - just use the right font (I think MS Gothic should work) to show the characters. You might want to consider switching to Swing.
Good luck

How to display list process, when i run sql*loader in c#

Hello,
How to display list process, when i run sql*loader in c#. I mean when i run sql*loader from cmd windows, i get list process how many row has been inserted. But when i run SQL*Loader from C#, i can't get process SQL*Loader.
This is my code:
string strCmd, strSQLLoader;
string strLoaderFile = "XLLOAD.CTL";
string strLogFile = "XLLOAD_LOG.LOG";
string strCSVPath = @"E:\APT\WorkingFolder\WorkingFolder\sqlloader\sqlloader\bin\Debug\8testskrip_HTTP.csv";
string options = "OPTIONS (SKIP=1, DIRECT=TRUE, ROWS=1000000,BINDSIZE=512000)";
string append = "APPEND INTO TABLE XL_XDR FIELDS TERMINATED BY ','";
string table = "OPTIONALLY ENCLOSED BY '\"' TRAILING NULLCOLS (xdr_id,xdr_type,session_start_time,session_end_time,session_last_update_time,session_flag,version,connection_row_count,error_code,method,host_len,host,url_len,url,connection_start_time,connection_last_update_time,connection_flag,connection_id,total_event_count,tunnel_pair_id,responsiveness_type,client_port,payload_type,virtual_type,vid_client,vid_server,client_addr,server_addr,client_tunnel_addr,server_tunnel_addr,error_code_2,ipid,c2s_pkts,c2s_octets,s2c_pkts,s2c_octets,num_succ_trans,connect_time,total_resp,timeouts,retries,rai,tcp_syns,tcp_syn_acks,tcp_syn_resets,tcp_syn_fins,event_type,flags,time_stamp,event_id,event_code)";
strCmd = "sqlldr xl/secreat@o11g control=" + strLoaderFile + " LOG=" + strLogFile;
System.IO.DirectoryInfo di;
try
System.Diagnostics.ProcessStartInfo cmdProcessInfo = new System.Diagnostics.ProcessStartInfo("cmd.exe");
di = new DirectoryInfo(strCSVPath);
strSQLLoader = "";
strSQLLoader += "LOAD DATA INFILE '" + strCSVPath.ToString().Trim() + "' " + append + " " + table;
StreamWriter writer = new StreamWriter(strLoaderFile);
writer.WriteLine(strSQLLoader);
writer.Flush();
writer.Close();
// Redirect both streams so we can write/read them.
cmdProcessInfo.RedirectStandardInput = true;
cmdProcessInfo.RedirectStandardOutput = true;
cmdProcessInfo.UseShellExecute = false;
cmdProcessInfo.LoadUserProfile = true;
//System.Diagnostics.Process.Start("CMD.exe", strCmdLine);
// Start the procses.
System.Diagnostics.Process pro = System.Diagnostics.Process.Start(cmdProcessInfo);
// Issue the dir command.
pro.StandardInput.WriteLine(strCmd);
// Exit the application.
pro.StandardInput.WriteLine("exit");
//Process[] processlist = Process.GetProcesses();
//foreach(Process pro in processlist){
Console.WriteLine("Process: {0} ID: {1}", pro.ProcessName, pro.Id);
Console.WriteLine(pro.StandardOutput.ReadLine());
// Read all the output generated from it.
string strOutput;
strOutput = pro.StandardOutput.ReadToEnd();
pro.Dispose();
catch (Exception ex)
return;
finally
Thanks.

friend
sqlldr is an application residing in the OS. procedure runs in the dbms engine.
you cannot run an os command directly from a procedure or a function or a package .
If you want to do so you need to use either a daemon process created by a PRO*C program
or a JAVA stored procedure to do so.
just refer to previous question forums, you can find the solution. Somebody has already given a solution using
java to run an OS command . check it out
prakash
[email protected]

How to display UTF - 8 when genereate excel from java

I use Jsp to input chinese words as UTF-8, and store them to Oracle. When I display these words in Jsp, there is nothing wrong. But if I generate Excel through servlet, these words display as "???e????", how can I resolve this problem?
Thank you!!!

What library are you using to generate xls files? Then find that library's support fora.

Display chinese word on ALV

I have a program that will generate a report in ALV format, some of fields included chinese word, can't show properly, but it can be shown properly when export to spreadsheet. How can i display those chinese word in ALV report? Thanks!

Hi,
In GUI_UPLOAD function module there is an import parameter "CODEPAGE" , here if you pass the code page for chinese character then you will be able to view the chinese character after uploading the excel sheet and storing it in the internal table.
Specify the code page parameter explicitly (in case the files are to be read or written in a specific code page).By default the codepage of the Operating system is picked up if nothing is specified. Sample code as follows:
Data : fend_filename type string ,
p_rcpage type abap_encoding.
call function 'GUI_UPLOAD'
     exporting
       filename                      = fend_filename
       filetype                        = 'ASC'
*      HAS_FIELD_SEPARATOR           = ' '
*      HEADER_LENGTH                 = 0
       read_by_line                  = 'X'
*      DAT_MODE                      = ' '
       codepage                      = p_rcpage
   *      IGNORE_CERR                   = ABAP_TRUE
*      REPLACEMENT                   = '#'
*    IMPORTING
*      FILELENGTH                    =
*      HEADER                        =
     tables
       data_tab                      = itab.
     ret_code = sy-subrc.
I am not so sure but If it is set to Chinese, it uses code page 4102 (Unicode). Else find the corresponding code page using FM NLS_GET_FRONTEND_CP.
Hope this helps.
Regards,
Neelanjana

How to display Chinese characters in Oracle?

I am using Oracle 8i with Language settings as AMERICA.
I am displaying records which is contain Chinese characters.
But it is not displayed properly in Oralce.
How to change the settings to display Chinese characters?
Thanks

It could be possible to display Chinese characters using SQL Developer without any specific NLS_LANG setting because SQL Developer is using JDBC which doesn't use NLS_LANG setting according to When is NLS_LANG used ?.
For example, I'm able to display the following Chinese character in SQL Developer 1.2.0 on Windows XP Pro with French Windows setting and NLS_LANG set in Windows registry to FRENCH_FRANCE.WE8ISO8859P1.
select unistr('\8349') from dual;
草
[pre]
Message was edited by:
Pierre Forstmann

How to display weicome message in sap logon screen?

Hello experts,
how to display message " welcome to company name" in the sap logon screen.
while typing userid and password in the same screen (right hand side ) , i want to display welcome message.
Pls give me the procedure.
Moderator message: easy to find via google, system administration, not related to ABAP development, please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 11, 2010 11:44 AM

If you want to give an error message on some processing you can raise the message in the event at selection-screen.
If you want to display information message also ,the same can be done in at selection screen
In case you want to do the processing selectively like only when the execute button is pressed, then you can do the processing based on SY-UCOMM. (value will be 'ONLI' )

How to display success message when data is changed in the custom tab in MM

Hi,
I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
Thanks in advance,
sudhanva

Hi Sudhanva,
The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
But the message issued by SAP is not related to this Function Exit.
If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will not issue the message.
In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
Hope this helps.
Regards,
Abhisek.

How to read Chinese word from a TXT file

File.OpenText() read a TXT File with Chinese word in ;but it not show right.
exam:The TXT File include :中国
this.Txt1.Text=ofd.File.OpenText().ReadToEnd();
but it show :��ʹ�ݼƻ��
How to solve it

What encoding does the text file use? Unlike .NET, Silverlight only supports UTF-8 and UTF-16. File.OpenText() uses UTF-8 by default.
If the text file is in some other encoding, you can create your own encoding class (that derives from System.Text.Encoding) that can be used to read the text file.
class MyEncoding : System.Text.Encoding {
this.Txt1.Text = (new StreamReader(ofd.File.OpenRead(), new MyEncoding())).ReadToEnd();
Regards,
Justin Van Patten
Program Manager
Common Language Runtime

Chart Linear Axis's title(Description) is not displaying chinese words!

Recently on my project's end there is a need to translate the current english web portal to chinese web portal . In the middle of the transition , i found that i had a difficulty to replace the Linear Axis description with chinese words , the initial code i had use to declare the english version linear axis description is shown as below:
<mx:verticalAxis>
<mx:LinearAxis labelFunction="linearAxis_labelFunc" title="Population" displayName="Population">
</mx:LinearAxis>
</mx:verticalAxis>
Then i replace the chinese words into the title and displayname , and this should be a very straight foward change. Eventually when i compile and run , the chart's linear axis doesnt shows up any words at all .
for testing purpose , i had actually try to insert the chinese words in between the english words example:
<mx:verticalAxis>
<mx:LinearAxis labelFunction="linearAxis_labelFunc" title="P(Chinese words here)opul(Chinese Words here)ation" displayName="P(Chinese Words here)opul(Chinese Words Here)ation">
</mx:LinearAxis>
</mx:verticalAxis>
Eventually the results only shows the description " Population ",
I had try to drag the chart to be way more larger to see if there is an alignment problem on the description, but still the chinese words is not appearing. So far i had no problem in inserting the chinese words into the panel title , label , and other table axis . I only have problem on the CHART'S LINEAR AXIS DESCRIPTION. it seems like the compiler is ignoring it ! i am currently using Adobe Flex Builder 3 Professional . Please Help me ! This is Urgent !

You might try embedding the font:
http://livedocs.adobe.com/flex/3/html/help.html?content=fonts_04.html
Are you using resource bundles to load the localized strings? Are your resource bundles UTF8 encoded?
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

How to display Chinese language?

There is a plan text file: article.txt, this file includes an Chinese article (Chinese Language).
The web server is English system.
Now I use a jsp file to display the content of this file, I use BufferedReader class to read the content of the file, then display it.
I use contentType="text/html;charset=gb2312" also, but it cannot display Chinese Character correctly.
Can anyone tell me how to display it?

Hi i am having the same problem....how did you do it...can please help me
<pre>
<%@ page import="java.util.*,java.io.*,java.text.*,java.sql.* " %>
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<% response.setContentType("text/html; charset=UTF-8"); %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>
</title>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<meta name="Generator" content="TextPad 4.0" />
<meta name="Author" content="" />
<meta name="Keywords" content="" />
<meta name="Description" content="" />
</head>
<body bgcolor="#ffffff" background="" text="#000000" link="#ff0000" vlink="#800000" alink="#ff00ff">
<%
request.setCharacterEncoding("UTF-8");
String str1 = "\u7528\u6237\u540d";
String name = request.getParameter("name");
if(name != null) {
// instead of setCharacterEncoding...
name = new String(name.getBytes("ISO8859_1"), "UTF-8");
System.out.println(application.getRealPath("/"));
System.out.println(application.getRealPath("/src"));
%>
req enc: <%= request.getCharacterEncoding() %>
rsp enc: <%= response.getCharacterEncoding() %>
str1: <%= str1 %>
name: <%= name %>
<%
BufferedReader in = null;
ArrayList str = new ArrayList(100);
try {
     in = new BufferedReader(new InputStreamReader( new FileInputStream("c:/Chinadescription\\coldtofu.txt"),"UTF-8"));
     String line;
     while ((line = in.readLine()) != null) {
     line = line.trim(); //
     if (line.equals("[stop]"))
     break;
     str.add(line);
     finally {
     if (in != null) {
     try {
     in.close();
     catch (Exception e) {}
     for (int i = 0 ; i < str.size(); i++) out.println(str.get(i));
%>
<form method="GET" action="testcharacter.jsp" encoding="UTF-8">
Name: <input type="text" name="name" value="" >
<input type="submit" name="submit" value="Submit" />
</form>
</body>
</html>
</pre>

How to display chinese word when i logon in EN?

Similar Messages

Maybe you are looking for