How to display weicome message in sap logon screen?

Hello experts,
how to display message " welcome to company name" in the sap logon screen.
while typing userid and password in the same screen (right hand side ) , i want to display welcome message.
Pls give me the procedure.
Moderator message: easy to find via google, system administration, not related to ABAP development, please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 11, 2010 11:44 AM

If you want to give an error message on some processing you can raise the message in the event at selection-screen.
If you want to display information message also ,the same can be done in at selection screen
In case you want to do the processing selectively like only when the execute button is pressed, then you can do the processing based on SY-UCOMM. (value will be 'ONLI' )

Similar Messages

How to display a specific SAP logon screen per system?

Hello,
I woud like to display a logon screen which contains system-specific information, e.g. for the QAS system it would be something like "This system was created by a system copy from PRD on MM/DD/YYYY"...
I have gone through the SAP Note 205487 and my understanding is that I have to create the ZLOGIN_SCREEN_INFO in the development (changeable) system and transport it.
Note 205487 : "Creating/changing this text requires a changeable system. Therefore, for production systems, SAP recommends maintaining the text in the upstream system and then transporting it."
Can anyone please provide me with some hints on how to create a different logon screen for each system and apply them via transport requests?
I prefer not to "open" the QAS system in order to create the logon screen because I would then have to "open" the productive system to create a different logon screen...
Any help is appreciated.
Thanks and Regards,
Michel M.

Hi Michel,
Please refer to below documents for modifying SAP Logon screen and transporting to other system.
[How to customize the login screen|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22219]
[Customizing SAP Login Screen|http://www.abap-tutorials.com/2009/12/30/customizing-sap-login-screen/]
[SAP logon screen, SE61, ZLOGIN_SCREEN_INFO|SAP logon screen, SE61, ZLOGIN_SCREEN_INFO;
Hope it helps
Regards
Arun

How to display Popup message in ABAP Web Dynpro

Hi All,
Is it possible to display popup messages like SAP to collect information from the user? is it possible to display information messages like SAP? If possible, Please let me know how to handle in Web Dynpro.
Thanks & Regards,
IA Kumar.

Agree with the two firend on my head :).
you can find a demo from: SWDP_TEST（package）--> WDR_TEST_POPUPS also.
I have a lazy idea, two step:
1. create a popup function module;
2.call the function module;
function module:--Begin--
FUNCTION ZFUNM_CONFIRM .
""Local interface:
*" IMPORTING
*" REFERENCE(P_API) TYPE REF TO IF_WD_VIEW_CONTROLLER
*" REFERENCE(P_CMP_API) TYPE REF TO IF_WD_COMPONENT
DATA:
 L_WINDOW_MANAGER TYPE REF TO IF_WD_WINDOW_MANAGER,
 L_CMP_API TYPE REF TO IF_WD_COMPONENT,
 L_API_MAIN TYPE REF TO IF_WD_VIEW_CONTROLLER,
 L_POPUP TYPE REF TO IF_WD_WINDOW,
 L_TEXT TYPE STRING_TABLE.
 wd_this type ref to IF_MAIN,
 wd_comp_controller TYPE REF TO IG_COMPONENTCONTROLLER.
 l_api_main = wd_this->wd_get_api( ).
l_cmp_api = wd_comp_controller->wd_get_api( ).
L_WINDOW_MANAGER = P_CMP_API->GET_WINDOW_MANAGER( ).
APPEND 'POPUP text' TO L_TEXT.
L_POPUP = L_WINDOW_MANAGER->CREATE_POPUP_TO_CONFIRM(
 TEXT = L_TEXT
 BUTTON_KIND = 4
 MESSAGE_TYPE = 1
 CLOSE_BUTTON = ''
 WINDOW_TITLE = 'messagebox Title'
 WINDOW_LEFT_POSITION = L_CONF_CONTEXT-WINDOW_LEFT_POSITION
 WINDOW_TOP_POSITION = L_CONF_CONTEXT-WINDOW_TOP_POSITION
 WINDOW_POSITION = L_CONF_CONTEXT-WINDOW_POSITION
 WINDOW_WIDTH = L_CONF_CONTEXT-WINDOW_WIDTH
 WINDOW_HEIGHT = L_CONF_CONTEXT-WINDOW_HEIGHT
L_POPUP->SUBSCRIBE_TO_BUTTON_EVENT(
 BUTTON = IF_WD_WINDOW=>CO_BUTTON_YES
 ACTION_NAME = 'YES'
 ACTION_VIEW = P_API
 IS_DEFAULT_BUTTON = ABAP_TRUE ).
L_POPUP->SUBSCRIBE_TO_BUTTON_EVENT(
 BUTTON = IF_WD_WINDOW=>CO_BUTTON_NO
 ACTION_NAME = 'NO'
 ACTION_VIEW = P_API
 IS_DEFAULT_BUTTON = ABAP_FALSE ).
L_POPUP->OPEN( ).
ENDFUNCTION.
function module:--End--
call the function module Begin----
METHOD ONACTIONDELETE .
DATA:
 L_API TYPE REF TO IF_WD_VIEW_CONTROLLER,
 L_CMP_API TYPE REF TO IF_WD_COMPONENT,
 NODE_ZTAB_PROJ TYPE REF TO IF_WD_CONTEXT_NODE,
 ELEM_ZTAB_PROJ TYPE REF TO IF_WD_CONTEXT_ELEMENT,
 STRU_ZTAB_PROJ TYPE IF_ZV_PROJ_DISPLAY=>ELEMENT_ZTAB_PROJ,
 SELECTED_ELEM TYPE WDR_CONTEXT_ELEMENT_SET .
navigate from <CONTEXT> to <ZTAB_PROJ> via lead selection
L_API = WD_THIS->WD_GET_API( ).
L_CMP_API = WD_COMP_CONTROLLER->WD_GET_API( ).
CALL FUNCTION 'ZFUNM_CONFIRM'
 EXPORTING
 P_API = L_API
 P_CMP_API = L_CMP_API.
IF WD_THIS->A_DEL = ''.
 EXIT.
ENDIF.
NODE_ZTAB_PROJ = WD_CONTEXT->GET_CHILD_NODE( NAME = IF_ZV_PROJ_DISPLAY=>WDCTX_ZTAB_PROJ ).
IF ( NODE_ZTAB_PROJ IS INITIAL ).
 EXIT.
ENDIF.
ELEM_ZTAB_PROJ = NODE_ZTAB_PROJ->GET_LEAD_SELECTION( ).
ELEM_ZTAB_PROJ->GET_STATIC_ATTRIBUTES(
 IMPORTING
 STATIC_ATTRIBUTES = STRU_ZTAB_PROJ ).
DELETE FROM ZTAB_PROJ
WHERE COMCODE = STRU_ZTAB_PROJ-COMCODE
 AND PROJID = STRU_ZTAB_PROJ-PROJID.
WD_THIS->ONACTIONSELECT(
 WDEVENT = WDEVENT " Ref to cl_Wd_Custom_Event
LOOP AT selected_elem .
ENDLOOP.
ELEM_ZTAB_PROJ
@TODO handle not set lead selection
alternative access via index
Elem_Ztab_Proj = Node_Ztab_Proj->get_Element( Index = 1 ).
@TODO handle non existant child
if ( Elem_Ztab_Proj is initial ).
endif.
get all declared attributes
ELEM_ZTAB_PROJ->GET_STATIC_ATTRIBUTES(
 IMPORTING
 STATIC_ATTRIBUTES = STRU_ZTAB_PROJ ).
ENDMETHOD.
call the function module End----

How to setup workplace message in SAP system

Hi Experts,
how to setup workplace message in SAP system.
when am logon SAP GUI i am getting mesage of Document workplace. ( you have one new document)
saying that in Inbox i have 1 document.
my client they dont want Receive that pop up message. thy want receive document but no pop up message .
where can i do customize thia i hope there was a T-code for this.
Thank INadvance,
Anthyodaya.

Hi,
Go to transaction SBWP and Click Distribution list and choose the list where you can find one check box send express. you just deselect the check box and save it. After that you will not receive any express note . but you will get messge to your inbox.
Regards,
abi

How to create general message in sap screen for all users

Hi Forum
I am using ECC6 version and i want to keep a message for all the users for assistance (like who is the administrator,contact number,mail id, etc)
Can anyone show me how to do this and also i want to know what is sm02 is used for?
Regards
Friend

You can do this by creating a message at the logon screen
Read SAP Note 205487
SM02 is used to send system messages like prior a system downtime or a scheduled maintainance, etc.
regards
Juan

How to Enable password saving in SAP Logon for Windows

how to Enable password saving in SAP Logon for Windows

Even though password saving, in SAP Logon for Windows is disabled by default, this can be enabled following the steps listed below:
    Open the command prompt by navigating to Start → Run and by typing “cmd”.
    Go to the \SAP\FrontEnd\SAPgui directory (in Program Files), through the command prompt.
    Create the necessary value in Windows registry by typing: sapshcut -register An information message will appear.
    Open the registry editor, in order to access Windows registry, by navigating to Start → Run and by typing “regedit”.
    Go to the HKEY_CURRENT_USER\Software\SAP\SAPShortcut\Security registry key.
    Change the value data of “EnablePassword“ from 0 to 1.
    Close SAP Logon and open it again, in case it was open during the whole process.

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
 MODE c_n
 MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
 MOVE v_pernr TO i_bdcerror2-pernr.
 MOVE c_infotype TO i_bdcerror2-infty.
 MOVE 'Error' TO i_bdcerror2-msgtype.
 SELECT SINGLE text
 INTO v_msgtxt
 FROM t100
 WHERE sprsl = i_error2-msgspra
 AND arbgb = i_error2-msgid
 AND msgnr = i_error2-msgnr.
 MOVE v_msgtxt TO i_bdcerror2-msgtxt.
 APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
 'INFOTYPE',
 'MESSAGE TYPE',
 'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
 WRITE: / i_bdcerror-pernr,
 13 i_bdcerror-infty,
 22 i_bdcerror-msgtype,
 35 i_bdcerror-msgtxt.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, MESSAGE_TEXT_BUILD and pass the following values from BDCMSGCOLL or the internal table where you collect the messages.
 i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
 v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

How to display a message dialog box

I need to know how to display a message box from my application.
Anyone can help me?
Thanks in advance

Dear Zennen,
Use JOptionPane.
Ex
JOptionPane.showMessageDialog(this,"message","title",JOptionPane.INFORMATION_MESSAGE); Thanks
Joey

How to forward support messages to SAP in non-working time automatically?

Hi colleagues and Happy New Year!
I have a question: how to forward support messages to SAP at non-working time automatically?
Details:
when a support message is created at working time it shouldn't leave my system, but when
a support message is created at non working time, for example, on saturday night it should be sent to SAP automatically. Where in the system I can find the options to customize it to provide these requirements?
Edited by: Helen Rudnikovskaja on Jan 3, 2009 12:36 PM

Hi These 2 notes wil solve your problem,
Note 1084744 - Problems with the automatic function "Send to SAP"
Note 1225682
Pls assign pts.

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to display the Message Pool Messages in CE 7.2

Hi Experts,
Please let me know how to display the Message Pool Messages in CE 7.2.
I have tried with reportContextAttributeMessage, but it is deprecated in CE 7.2.
Please do the needful.Its Urgent.
Thanks & Regards,
SatheshKumar R

Hi Sathesh,
Do the following steps:
1.) After creating a component, under it you will see Message Pools. Double click and open it.
2).Click "Add Message" and add a new message. (Give a message key, type of message (either warning, error etc ) and message text).
3). Save the metadata.
4). Raise this message where all you want by using following code(For example, on click of a button) :
 IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
 msgnr.reportMessage(IMessage<component name>.<message>,null,true);
For example, I have a component name TestAppComp and under message pool I have message called message1, then use lik this:
 IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
 msgnr.reportMessage(IMessageTestAppComp.MESSAGE1,null,true);
Reply me if you any doubt.
Regards,
Jithin

How to create system message in SAP EP?

Dear All,
How to create system message in SAP EP?
i need to find solution for this task. Is there any way without collaboration? For example in SLD there is "System message" without additional functions. Please help.
Portal installed on Netweaver 7.01 EHP1

Hi Abay,
You need to develop custom application to accomplished your requirement for system message in the potral.
Please have a look at "Brodcast messages to logged on users in Portal:
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
Also you can develop system message in the KM and integrate in the portal.
Hope it will helps,
Regards, Arun Jaiswal

How to Clean the Command History in SAP Logon Screen

Hi
Can any one let me know on how to clean the Command History (Where we generally enter the T Codes) in SAP Logon Screen.
I dont want to List/see all the Previous command Hits in drop down box.
Thanks
Dan

Hi Eric and Markus,
We found the Solution and off course we did good R & D, Finally I am able to implement the fix to Clear the Command Line History.
All I did is I Disabled the Permissions for Code Folder (Right Click > Permissions > Deny) in Regedit.
Thats It, The Commands stopped storing in the History.
Thank you Erick and Markus.
Rg
Dan

How to display weicome message in sap logon screen?

Similar Messages

Maybe you are looking for