How to display data based on the option selected in selectonechoice

Hi,
I have an adf application jspx page where I need to display list of Sectors in a list box and on selection of a sector corresponding Departments will get displayed as golinks.
I am using af:selectOneChoice where I am displaying Sector Lists.
<af:selectOneChoice label="" id="soc1" immediate="true" autoSubmit="true" clientComponent="true" unselectedLabel="Select a Sector" valuePassThru="true" value="#{DepartmentalInformationManagedBean.sectorId}">
<af:forEach items="#{DepartmentalInformationManagedBean.sectors}" var="sectorList">
<af:selectItem label="#{sectorList.sectorName}" value="#{sectorList.sectorId}" id="si1"/>
</af:forEach>
</af:selectOneChoice>
<!--To display list of Departments -->
<af:forEach items="#{DepartmentalInformationManagedBean.departments}" var="departmentList">
<af:goLink text="#{departmentList.departmentName}" partialTriggers=":soc1" destination="http://www.google.co.in" targetFrame="_blank" id="gl1"/>
</af:forEach>
The problem is when I am selecting one Sector, I am getting the corresponding Departments inside the managedbean but the Department links are not reflecting in my page.
Can any one please help me.

853833 wrote:
<af:forEach items="#{DepartmentalInformationManagedBean.departments}" var="departmentList">
<af:goLink text="#{departmentList.departmentName}" partialTriggers=":soc1" destination="http://www.google.co.in" targetFrame="_blank" id="gl1"/>
</af:forEach> Try setting partialTrigger on af:forEach instead of af:goLink. If that doesn't work, try wrapping the af:forEach with af:panelGroupLayout and set partialTrigger on that.

Similar Messages

  • How to display data elements in the tempalte header

    Hello friends
    i've this date_from and date_to parameters which are date parameters that user enters..
    based on these date parameters I want to display them in the header as
    day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
    16-nov-2010.(date-1's day)
    so it should break down to
    date_from-13-nov-2010, 13
    date_to- 16-nov-2010, 15
    I want these two values to be displayed in the header of the template how to do this
    pls help
    also let me know how to display data elements in the template header
    Edited by: erp on Dec 22, 2010 12:44 AM

    Hi Ananth..Thanks for ur timely reply
    Can I use it with <? substring(':date_from',1,2)?>
    where date_from is an input parameter which user enters at the run time of the report.
    I've to capture the date entered by the user and print it in the header..
    Pls reply

  • How to display help based on the Jlabel description

    Hi all,
    I try to display help based on the Jlabel description. When a user click on the help button, I want to use the label description to match correct help topic and display on the screen. I have following code as Field-level help but it returns error. Looks like I cannot use jLabel1.gettext() dynamically. Please let me know if you have any idea!
                String st = jLabel1.getText();
                URL url = HelpSet.findHelpSet(null,"preferences.hs");
              hs = new HelpSet(null,url);
               hb = hs.createHelpBroker();                      
               hb.enableHelp( jLabel1, jLabel1.gettext(), hs );Thanks,
    NY

    You did notice that this is the Forms Forum right???
    If not then click [url http://forums.oracle.com/forums/forum.jspa?forumID=84]Here
    Tony

  • How to display dates on which the field of an infotype is changed

    there are two fields   in an infotype and both the fields are changed on different dates then how to display those dates on which the two fields are changed

    Hi ankit,
    If you want the change log for one infotype with one two fields, then write one custom program with following logic. If you want the log for multiple infotypes for multiple fileds then you have to use that program 'RPUAUD00'. Read the documentation of the program to check how to use it.
    select * from pa0000 into table it_pa0000
                                   where pernr = v_pernr.
    sort it_pa0000 by begda descending.
    loop at it_pa0000 into wa_pa0000.
    write your own logic to compare the previous record PERSG with current record PERSG.
    if this doesnt match then get the Changed DATE from AEDTM field.
    wa_pa0000-AEDTM = changed date.
    Else.
    continue with loop.
    exit.
    endloop.
    regards,
    Shrinivas

  • How to display data based on two columns in Apex calendar?

    I have a table for holiday details with 2 date columns...from-date and a to-date. I need to display the name of the person for the date range they have specified. For Ex if i applied for leaves from may 1 to may 4...the calendar should display my name for 4 dates i.e may1,2,3 and 4
    I am new user in apex and still trying new things. Please help me achieve this.

    Swetha
    I created an application using Apex. It is a calendar application to show events that are happening. I ran into an issue with it
    If there is an event that occurs during an interval like August15 - August22, the event is shown only on August15, which is the first day of the event. I would like to show it in all days from August15-22.
    Here are the items coming from the page
    event_id number,
    employee_id number
    date_from date,
    date_to date,
    due_date date,
    act_id number,
    act_loc varchar2,
    reminder varchar2,
    frequency varchar2,
    division varchar2,
    event_status varchar2
    I am looking to write a process / procedure where it can show the same event on all the days it is occurring
    Thanks in advance
    Latha

  • Dynamic data on  Screen -Display data Based On the First Field

    hello Helping Minds..
    I have Two Fields In MODULEPOOL SCREEN.
    1--- BUKRS
    2--- BELNR ..... Both From BKPF table.
    My requirement is When i select a CompanyCode ( BUKRS ) In d first field,all the DocumentNO ( BELNR ) related to that CompCOde Shd be displayed in the 2nd field,
    For Ex-
    If i choose BUKRS = 1000,
    and Then clicked the Belnr field, All d DocumentNO for BUKRS 1000 will be populated in d Dropdown list..
            BUKRS = 0001,
    then BELNR = 0100000000 ,
                          0100000001 in d dopdown. 
    source code will be Appreciated...
    Thnks in advance To D helping Minds

    Process on value-request.
    filed Bukrs module f4_bukrs.
    field belnr module f4_belnr.
    *module f4bukrs input.*_
    if belnr is not initial.
    select belnr bukrs from bkpf whre belnr = belnr.   
    else.
    select belnr bukrs from bkpf whre belnr = belnr.
    endif.               ""   Hey both these Condition lead to same thing...den Whts d use??
    Firstly Belnr will be always Intial. cos it will be populated after we select the BUKRS.  , Here am confused?
    if t_bkpf is not initial.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'        "  No idea Abt dis FUncn module, pls explain
    endif.
    end module.
    module f4_belnr input.
    if bukrs is not initial.
    select belnr bukrs from bkpf where bukrs = bukrs.
    else.
    select belnr bukrs from bkpf whre belnr = belnr.
    endif.
    if t_bkpf is not initial.          ""   What is t_bkpf and y its used
    call fm to CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    endif.
    end module.

  • DYnamic Screen -Display data Based On the First Field

    hello Helping Minds..
    I have Two Fields In  MODULEPOOL SCREEN.
    1--- BUKRS
    2--- BELNR     ..... Both From BKPF table.
    My requirement is When i select a CompanyCode ( BUKRS )  In d first field,all the DocumentNO ( BELNR ) related to that CompCOde Shd be displayed in the 2nd field,
    For Ex- If i choose BUKRS = 1000,
                and Then clicked the Belnr field, All d DocumentNO for BUKRS 1000 will be populated in d Dropdown list..
            BUKRS = 1000,
    then  BELNR = 0100000000 ,
                           0100000001   in d dopdown.
    <<don't cross post/Duplicate else thread will be locked or deleted>>
    Thnks in advance To D helping Minds
    Edited by: Vijay Babu Dudla on Apr 25, 2009 4:57 AM

    Process on value-request.
    filed Bukrs module f4_bukrs.
    field belnr module f4_belnr.
    *module f4bukrs input.*_
    if belnr is not initial.
    select belnr bukrs from bkpf whre belnr = belnr.   
    else.
    select belnr bukrs from bkpf whre belnr = belnr.
    endif.               ""   Hey both these Condition lead to same thing...den Whts d use??
    Firstly Belnr will be always Intial. cos it will be populated after we select the BUKRS.  , Here am confused?
    if t_bkpf is not initial.
      CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'        "  No idea Abt dis FUncn module, pls explain
    endif.
    end module.
    module f4_belnr input.
    if bukrs is not initial.
    select belnr bukrs from bkpf where bukrs = bukrs.
    else.
    select belnr bukrs from bkpf whre belnr = belnr.
    endif.
    if t_bkpf is not initial.          ""   What is t_bkpf and y its used
    call fm to CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    endif.
    end module.

  • How to display data in a grid after selecting topic from combo box?

    could someone help me out? i'm displaying a combo box (about
    20 items) vertically. when user selects one of these items, i'd
    like for information regarding that choice to be displayed in my
    data grid. thanks - Karl from Kansas

    If you have the following:
    <mx:ComboBox id="combo_box" dataProvider="{users}"
    labelField="user_name" change="show_details(event)"
    ></mx:ComboBox>
    <mx:DataGrid id="data_grid" >
    <mx:columns>
    <mx:DataGridColumn headerText="Name"
    dataField="user_name"/>
    <mx:DataGridColumn headerText="email"
    dataField="email"/>
    </mx:columns>
    </mx:DataGrid>
    private function show_details(evt:Event):void {
    data_grid.dataProvider = evt.currentTarget.selectedItem
    This assumes that your combo box data has a user_name and
    email property value. Substitute your property values where needed.
    Vygo

  • How to display text value in the header data (Header text) of credit memo

    Hi...
    I need to display the text value of the text field in the header text of the header data in credit memo.
    The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
    Appreciate your help on how to do this...
    Thansk and will surely reward the points..
    Kanthi..

    Hi kanthi ,
                   Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
    Please award if useful.

  • How to display data from a recordset based on data from another recordset

    How to display data from a recordset based on data from
    another recordset.
    What I would like to do is as follows:
    I have a fantasy hockey league website. For each team I have
    a team page (clubhouse) which is generated using PHP/MySQL. The one
    area I would like to clean up is the displaying of the divisional
    standings on the right side. As of right now, I use a URL variable
    (division = id2) to grab the needed data, which works ok. What I
    want to do is clean up the url abit.
    So far the url is
    clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
    I want is clubhouse.php?team=Wings.
    I have a separate table, that has the teams entire
    information (full team name, short team, abbreviation, conference,
    division, etc. so I was thinking if I could somehow do this:
    Recordset Team Info is filtered using URL variable team
    (short team). Based on what team equals, it would then insert this
    variable into the Divisional Standings recordset.
    So example: If I type in clubhouse.php?team=Wings, the Team
    Info recordset would bring up the Pacific division. Then 'Pacific'
    would be inserted into the Divisional Standings recordset to
    display the Pacific Division Standings.
    Basically I want this
    SELECT *
    FROM standings
    WHERE division = <teaminfo.division>
    ORDER BY pts DESC
    Could someone help me, thank you.

    Assuming two tables- teamtable and standings:
    teamtable - which has entire info about the team and has a
    field called
    "div" which has the division name say "pacific" and you want
    to use this
    name to get corresponding details from the other table.
    standings - which has a field called "division" which you
    want to use to
    give the standings
    SELECT * FROM standings AS st, teamtable AS t
    WHERE st.division = t.div
    ORDER BY pts DESC
    Instead of * you could be specific on what fields you want to
    select ..
    something like
    SELECT st.id AS id, st.position AS position, st.teamname AS
    team
    You cannot lose until you give up !!!
    "Leburn98" <[email protected]> wrote in
    message
    news:[email protected]...
    > How to display data from a recordset based on data from
    another recordset.
    >
    > What I would like to do is as follows:
    >
    > I have a fantasy hockey league website. For each team I
    have a team page
    > (clubhouse) which is generated using PHP/MySQL. The one
    area I would like
    > to
    > clean up is the displaying of the divisional standings
    on the right side.
    > As of
    > right now, I use a URL variable (division = id2) to grab
    the needed data,
    > which
    > works ok. What I want to do is clean up the url abit.
    >
    > So far the url is
    clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
    > all
    > I want is clubhouse.php?team=Wings.
    >
    > I have a separate table, that has the teams entire
    information (full team
    > name, short team, abbreviation, conference, division,
    etc. so I was
    > thinking if
    > I could somehow do this:
    >
    > Recordset Team Info is filtered using URL variable team
    (short team).
    > Based on
    > what team equals, it would then insert this variable
    into the Divisional
    > Standings recordset.
    >
    > So example: If I type in clubhouse.php?team=Wings, the
    Team Info recordset
    > would bring up the Pacific division. Then 'Pacific'
    would be inserted into
    > the
    > Divisional Standings recordset to display the Pacific
    Division Standings.
    >
    > Basically I want this
    >
    > SELECT *
    > FROM standings
    > WHERE division = <teaminfo.division>
    > ORDER BY pts DESC
    >
    > Could someone help me, thank you.
    >

  • Changing the selection screen based on the option in list box option

    Hi Experts,
    I have a list box parameter in my selection screen,
    i have four options and i am changing my selection screen based the option selected.
    see my code below,
    at selection-screen output.
      GS_VRM_VALUES-KEY = '1'.
      GS_VRM_VALUES-TEXT = TEXT-S02.
      APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
      GS_VRM_VALUES-KEY = '2'.
      GS_VRM_VALUES-TEXT = TEXT-S03.
      APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
      GS_VRM_VALUES-KEY = '3'.
      GS_VRM_VALUES-TEXT = TEXT-S04.
      APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
      GS_VRM_VALUES-KEY = '4'.
      GS_VRM_VALUES-TEXT = TEXT-S05.
      APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
      CLEAR: GS_VRM_VALUES.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          ID                    = 'P_DROP'
          VALUES                = GT_VRM_VALUES
      EXCEPTIONS
        ID_ILLEGAL_NAME       = 1
        OTHERS                = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    LOOP AT SCREEN .
        CASE P_DROP .
          WHEN '1'.
            IF SCREEN-GROUP1 = 'M2' OR
              SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
              screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
          WHEN '2'.
            IF SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
              screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
          WHEN '3'.
            IF SCREEN-GROUP1 = 'M2' OR
                SCREEN-GROUP1 = 'M4' .
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
              screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
          WHEN '4'.
            IF SCREEN-GROUP1 = 'M2' OR
            SCREEN-GROUP1 = 'M3'.
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
              screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
          WHEN OTHERS.
            IF SCREEN-GROUP1 = 'M2' OR
               SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
          screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
        ENDCASE.
      ENDLOOP.
    my problem is when i change the option in the list box, the particular modify group ie, the screen is getting changed only after i press enter, So please suggest me how i can change the screen without pressing enter.

    Hi,
    without using VRM_SET_VALUES...you just create one data element by going se11....create one domain for it...now give the values in the "value range" tab....and at the time of declaration just write ..
    PARAMETERS var1 TYPE <your created data element>
                        AS LISTBOX VISIBLE LENGTH 20
                        USER-COMMAND onli
                        DEFAULT <one value>.
    You will get the same effect as list box....and make it mandatory..
    Arunima

  • How to display Date Calendar in Oracle BI Answers Prompts (parameter)

    I'm still new to OBIEE.
    How to display Date Calendar in Oracle BI Answers Prompts (parameter)?
    Thanks.

    Hi,
    While creating Dash Board prompt choose the control to 'Calendar'.
    I think it is not possible to provide 'Calendar' control using Prompts tab while creating request.
    It is possible to write Java Script for a Column of data type 'char'. So, cast the date data type to char.
    Go to: Column Properties --> Data Format
    Choose override default data format to view the available options in the drop down list.
    I would be very happy if anybody acknowledge me that I am wrong.
    -Vency

  • How to display data in table

    Hi all,
    can any one tell me how to display data in a table when user click on a button. i have created a node with a set of fields from different tables now how to write the logic to display data in that table.
    Thanks & Regards,
    Naveen

    DATA lo_nd_professionaltable TYPE REF TO if_wd_context_node.
      DATA lo_el_professionaltable TYPE REF TO if_wd_context_element.
      DATA ls_professionaltable TYPE wd_this->ElementS_professionaltable. "internaltable
    TYPES: BEGIN OF TY_PFTAB,
           RATEGROUP TYPE /BIC/OIWRATEGRP,
           LEVEL TYPE /BIC/OIWPCSLEVEL,
           FROMDATE TYPE /BI0/OIDATEFROM,
           FROMTO TYPE /BI0/OIDATETO,
           STANDARD TYPE /BIC/OIWSTRATE,
           OVERHEAD1 TYPE /BIC/OIWOHRTE1,
           OVERHEAD2 TYPE /BIC/OIWOHRTE2,
           OVERHEAD3 TYPE /BIC/OIWOHRTE3,
           EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
           END OF TY_PFTAB.
    DATA : IT_PFTABLE TYPE STANDARD TABLE OF TY_PFTAB,
           WA_PFTAB TYPE TY_PFTAB.
    SELECT /BIC/WRATEGRP /BIC/WPCSLEVEL DATEFROM DATETO /BIC/WSTRATE /BIC/WOHRTE1 /BIC/WOHRTE2 /BIC/WOHRTE3
    FROM /BIC/AGLDCPRTS00 INTO TABLE IT_PFTABLE.
    *TYPES : BEGIN OF TY_EXCEPTION,
           EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
           END OF TY_EXCEPTION.
    *DATA : IT_EXTABLE TYPE STANDARD TABLE OF TY_EXCEPTION,
          WA_EXTABLE TYPE IT_EXTABLE.
    *SELECT /BIC/MSECFILER FROM /BIC/AGLDCLMLT00 INTO TABLE IT_EXTABLE.
    navigate from <CONTEXT> to <PROFESSIONALTABLE> via lead selection
      lo_nd_professionaltable = wd_context->get_child_node( name = wd_this->wdctx_professionaltable ).
    get element via lead selection
      lo_el_professionaltable = lo_nd_professionaltable->get_element( ).
    @TODO handle not set lead selection
    IF lo_el_professionaltable IS INITIAL.
    ENDIF.
    get all declared attributes
    lo_el_professionaltable->get_static_attributes(
       IMPORTING
         static_attributes = ls_professionaltable ).
    lo_nd_professionaltable->bind_table( new_items = IT_PFTABLE set_initial_elements = abap_false ).

  • Problem in displaying totals based on the Unit of measurement.

    Hi,
    I have Problem in displaying totals based on the Unit of measurement.
    I want to display the total in the output of the alv based on the unit of measurement. for example i have three fields in the output namely
    Matnr           Quantity      UOM
    51                10              EA
    61                10              KG
    71                10              KG
    In the total i should get
                    10         EA
                    20         KG
    Can anyone tell me how to do this?
    The basic req is the exclude the qty with unit EA(each) in the totals.
    Thanks,
    Amit

    H i,
    you can use the collect statement
    to get the proper result
    loop at itab.  ( all the records)
    move all the fields from itab to another
    collect itab1.
    write: itab1-fields, itab1-fields.
    endloop.
    this will solve your problem
    reward points if helpful,
    thanks & regards,
    venkatesh

  • How to display data depend upon ListBox value?

    Hi Experts and Particularly Hema,
    As I asked before how to display data in the ListBox, I got an very good response from you all(particularly Hema) .
    Now what my doubt is asked with sample scenario below:
    In Screen Painter -
    Two fields namely : One List Box and other is I/O used only for displaying purpose i.e., only for output, not for input purpose.
    List Box is filled by primary key field(C1) value from one table(T1) when the screen load.(i.e., such code is written in PBO).
    Now what I need is :
    If the user select any one value in the List Box then it automatically display the corresponding C2 value from T1 in the I/O field.
    I think you may all understand what I am trying to ask.Please let me know the solution.
    Thanks in advance,
    Regards,
    Raghu

    Simply attached a function code for the listbox... when the user changes the value, you will be able to pick this up in the PAI and loop back to the PBO and redisplay the corresponding output field.
    Jonathan

Maybe you are looking for