How to display document from external archive via archivelink?

Hi,
I would like to display in SAP (via ArchiveLink) scanned document which was stored in an external archive (FileNet). The archive system is connected to SAP via ArchiveLink. However the scanned document isn't stored in the archive system via SAP so I don't know the ARCHIV_DOC_ID. I only know OBJECT_ID as far as the metadata of document is considered.
I tried to use ARCHIVOBJECT_DISPLAY function module with object_id and arvchiv_id but I get the message no. OA512 (Parameter info was not transferred for command docId). I can only display scanned document entering the right value of ARCHIV_DOC_ID parameter. But actually I don't know the value of this parameter from the level of SAP system.
Could anybody give me some clue or hints?
Best regards,
Zacaria

Hi
Just as Fred written SAP needs to be linked to external archiving system by a Contenent Repository (transaction OAC0).
The menu for ArchivLink setting is in customazing:
Was it done that?
Max

Similar Messages

  • How to display images from BLOB column via APEX 4.0

    Hello,
    I did the following in order to display images of two Oracle records on the APEX page. I am using APEX Version : 4.0.1.00.03 , Oracle DB Version : 10.2.0.4.0.
    1. Created An oracle table TEST_FORM
    with 3 columns
    ( ID number, MIME_TYPE varchar2(255) , Image BLOB )
    2. Inserted two records
    10001, image/gif, ( actual image1)
    10002, image/gif, ( actual image2)
    3. created an Oracle procedure
    CREATE OR REPLACE PROCEDURE show_my_form ( p_image_id IN test_form.id%type) AS
    l_mime test_form.mime_type%type;
    l_length NUMBER;
    l_file_name VARCHAR2 (2000);
    lob_loc test_form.IMAGE%type;
    BEGIN
    SELECT mime_type, IMAGE
    , DBMS_LOB.getlength (IMAGE)
    INTO l_mime, lob_loc, l_length
    FROM test_form
    WHERE id = p_image_id;
    owa_util.mime_header(l_mime, false);
    htp.p ('Content-length: ' || l_length);
    owa_util.http_header_close;
    wpg_docload.download_file (lob_loc);
    END show_my_form ;
    4. In Apex 4.0
    step1. Created an interactive report on a new APEX page
    step2. Specified the following in the Region Source
    select id, mime_type, '<img src="#OWNER#.show_my_form ?p_image_id=#ID#" />' photo
    from TEST_FORM
    The column result shows as <img src="CCS.show_my_form?p_image_id=#ID#" />
    I am unable to display the column image as a link to a proper image photo.
    Could you please advise me if I missed anything ?
    Thanks a lot.
    Regards
    Susanna
    Edited by: user10318332 on 13/12/2010 15:51
    Edited by: user10318332 on 13/12/2010 20:10

    Maybe the space you have before the ? is causing issues. there shouldn't be any space.
    Your procedure looks to be much the same of one that I have.
    Have you granted execute on your procedure?
    Also, what version DB are you running? This could be another issue: http://daust.blogspot.com/2006/04/xe-calling-stored-procedures.html
    But anyway, you don't need to create your own procedure these days. You could do the following:
    in your query, have a column: dbms_lob.getlength(blob) photo ; save, then in column attributes for that column, apply a format mask. There is usually a link below the text box for the format mask - BLOB Download Format Mask, which will help you build the format mask. But it is documented here: http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/advnc.htm#BCGGJHEF
    Ta,
    Trent

  • Display Document from Archive (TOAHR)

    hi all,
    is there a FM for displaying Document from Archive? i 've used a FM, but its only displaying FOTO and PDF, and it doesnt work with EXCEL or WORD, is there any idee ?
    Best Regards

    Not sure just searched in se37 and got this ARCHIVOBJECT_DISPLAY_WEBGUI.
    You can search for more in se37for ARCHIV*.

  • How to send delivery document from external system to ECC

    i have a business requirement to send a delivery and billing documents from external system ( MS access )  to ECC
    could any one light me how to do this ???
    Thank you in advance

    Hi Ahmed,
    Talk to your middleware team, They will upload the data through RFC.
    Basiclly RFC(Remote function call) works like it will call the function module and then upload the data.
    For more information, check the link given below.
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
    Hope this helps,
    Regards,
    MT

  • Documents from external system

    Hi experts.
    I would like to aks You how can I solve following problem:
    1. I have an aplication in ABAP
    2. There is an external aplication for optical archive of documents
    3. We are ucing JaCo to communicate with external aplication.
    And, main problem is, that I need to view scanned document from external aplication in our SAP aplication.
    I have two ideas:
    1. through HTML viewer - I will get an URL addres of HTML code of the scanned document - but, there is an problem with rights. To view this URL i need this url has to be a public (user's browser must "see" it). but, this is not possible to public this url, because there are scanned agreements. And, when this url is private only for SAP server and external application, the HTML viewer cannot find it ..... I have thinking about using username and password in HTML code and url addres, but, that is not what I prefer ...
    2. through PDF - the external application create an PDF document on their directory. But, how can I view this PDF in SAP (from external directory in other system).
    Many many thans for any answer.
    Have a nice day .....

    Hi,
    From your description, you want to get numerous files into SharePoint Document Libraries.
    After you log on to the SharePoint document library->click Actions->followed by
    Open with Windows Explorer. After Windows Explorer opens, you can upload and download files and folders using the standard copy-and-paste operation.
    Refer to the article:
    http://windowsitpro.com/systems-management/easy-way-get-numerous-files-and-out-sharepoint-document-libraries
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How can I print from my ipad2 via my Canon Pixmar MP620 wireless printer? I get a message stating "no airprinter found".

    How can I print from my ipad2 via my Canon Pixmar MP620 wireless printer? I get a message stating "no airprinter found".

    Welcome to Apple Support Communities.
    If you have a Mac running OS X, try AirPrint Activator.
    http://netputing.com/airprintactivator/airprint-activator-v2-0/
    It's "donation-ware."
    Free to download and try. If it works and you like it, the developers do appreciate a donation, but the app continues to function, even without a donation.

  • How to display data from a recordset based on data from another recordset

    How to display data from a recordset based on data from
    another recordset.
    What I would like to do is as follows:
    I have a fantasy hockey league website. For each team I have
    a team page (clubhouse) which is generated using PHP/MySQL. The one
    area I would like to clean up is the displaying of the divisional
    standings on the right side. As of right now, I use a URL variable
    (division = id2) to grab the needed data, which works ok. What I
    want to do is clean up the url abit.
    So far the url is
    clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
    I want is clubhouse.php?team=Wings.
    I have a separate table, that has the teams entire
    information (full team name, short team, abbreviation, conference,
    division, etc. so I was thinking if I could somehow do this:
    Recordset Team Info is filtered using URL variable team
    (short team). Based on what team equals, it would then insert this
    variable into the Divisional Standings recordset.
    So example: If I type in clubhouse.php?team=Wings, the Team
    Info recordset would bring up the Pacific division. Then 'Pacific'
    would be inserted into the Divisional Standings recordset to
    display the Pacific Division Standings.
    Basically I want this
    SELECT *
    FROM standings
    WHERE division = <teaminfo.division>
    ORDER BY pts DESC
    Could someone help me, thank you.

    Assuming two tables- teamtable and standings:
    teamtable - which has entire info about the team and has a
    field called
    "div" which has the division name say "pacific" and you want
    to use this
    name to get corresponding details from the other table.
    standings - which has a field called "division" which you
    want to use to
    give the standings
    SELECT * FROM standings AS st, teamtable AS t
    WHERE st.division = t.div
    ORDER BY pts DESC
    Instead of * you could be specific on what fields you want to
    select ..
    something like
    SELECT st.id AS id, st.position AS position, st.teamname AS
    team
    You cannot lose until you give up !!!
    "Leburn98" <[email protected]> wrote in
    message
    news:[email protected]...
    > How to display data from a recordset based on data from
    another recordset.
    >
    > What I would like to do is as follows:
    >
    > I have a fantasy hockey league website. For each team I
    have a team page
    > (clubhouse) which is generated using PHP/MySQL. The one
    area I would like
    > to
    > clean up is the displaying of the divisional standings
    on the right side.
    > As of
    > right now, I use a URL variable (division = id2) to grab
    the needed data,
    > which
    > works ok. What I want to do is clean up the url abit.
    >
    > So far the url is
    clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
    > all
    > I want is clubhouse.php?team=Wings.
    >
    > I have a separate table, that has the teams entire
    information (full team
    > name, short team, abbreviation, conference, division,
    etc. so I was
    > thinking if
    > I could somehow do this:
    >
    > Recordset Team Info is filtered using URL variable team
    (short team).
    > Based on
    > what team equals, it would then insert this variable
    into the Divisional
    > Standings recordset.
    >
    > So example: If I type in clubhouse.php?team=Wings, the
    Team Info recordset
    > would bring up the Pacific division. Then 'Pacific'
    would be inserted into
    > the
    > Divisional Standings recordset to display the Pacific
    Division Standings.
    >
    > Basically I want this
    >
    > SELECT *
    > FROM standings
    > WHERE division = <teaminfo.division>
    > ORDER BY pts DESC
    >
    > Could someone help me, thank you.
    >

  • Constructing a new Document from External Nodes

    Constructing a new Document from External Nodes
    I have a situation where:
    1.     I have an existing XML Document
    2.     I need to parse for specific Nodes under varying conditions
    3.     Once the Node is identified -- I would like to append this node as a new Node in a new Document
    Is this possible? The methods in the API do not lend themselves to attaching a Node that was not explicitly created by the target Document.

    Hummm�
    That works, sort of; it does allow the node to be imported, but at the Document level only. I will need to apply this at various Node (Element) points, which the API does not permit.
    Thanks for the info.

  • How to see documents from my computer in icloud

    I must be really slow because I have no idea how to see documents from one computer to another or my devices using icloud.  I have Lion and Pages on my home computer and my laptop.  I have an iCloud account.  So how do I get the pages documents that I create on my imac to sync to the cloud so that I can view and edit them on my laptop and ipad.  And visa versa.  I have the icloud documents option "on" from my preference menu on all devices.  What else do I need to do.  And where is the tutoria

    iWork documents from a computer can be added to iCloud by dragging them onto the appropriate page at iCloud.com on your web browser.

  • How to get documents from RMS linked to particular case id using webdynpro

    HI friends,
    Can  anybody knows " How to get documents from RMS linked to particular case id."
    From end: webdynpro
    backend: RMS.
    please do the needful.
    Thanks and Regards
    -Sujatha

    HI friends,
    Can  anybody knows " How to get documents from RMS linked to particular case id."
    From end: webdynpro
    backend: RMS.
    please do the needful.
    Thanks and Regards
    -Sujatha

  • I'm wondering how to display "bullets" from the bottom to the top (last to first) in a slideshow.  Can anyone help?

    I'm wondering how to display "bullets" from the bottom to the top (last to first) in a slideshow.  Can anyone help?

    Select the set of bullets. Go to the "Build" panel of the Inspector. Choose "Build In". Choose your effect. Select "By Bullet Group" under delivery.
    Be sure to experiment with the various options.

  • How to transfer documents from pc to mac?

    I was wondering how to transfer documents from Pc windows 7 to mac book air, without internet on the windows pc?

    http://www.apple.com/support/macbasics/migration/

  • How do install  program from external drive to mac book air

    how do install  program from external drive to mac book air

    DVD or CD sharing: Using Remote Disc - Apple Support

  • How to display a popup window (DialogMessage) via code behind c#?

    hi all,
    How to display a popup window (DialogMessage) via code behind c#?
    I use sp 2013, in else case I want show the DialogMessage:
    if(condition)
    else
      HttpContext.Current.Response.Redirect(SPContext.Current.Web.Url+"/_layouts/TestError/ErrorDueDate.aspx");
    the above Redirect work good but I want show the error in a DialogMessage its better because of Usability and not redirect the user to new page...
    if not via code behind is there a better way to do it?
    thanks in advance
    Ahmad
    SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

    thanks for you answer,
    And yes I includ them via CDN, like below:
    <script
    type="text/javascript"
    src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script>
    <script
    src="http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.9/jquery-ui.js"
    type="text/javascript"></script>
    <link
    href="http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.9/themes/start/jquery-ui.css"
    rel="stylesheet" type="text/css"
    />
    But I get still the above error in my previes post.
    SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

  • How to display items from database using catagorylookupdroplet

    Hi everyone,
    i want to know how to display items from database using catagorylookup droplet. if anybody have any code snippet please share it.
    Thanks in advance,

    <dsp:droplet name=".................../CategoryLookup">
         <dsp:param name="id" param="itemId"/>
         <dsp:oparam name="output">
              <dsp:valueof param="element.displayName"/>
                   <%-- This is show the Child Category --%>
                   <dsp:droplet name="......................./ForEach">
                   <dsp:param name="array" param="element.childCategories"/>
                   <dsp:oparam name="outputStart">Child Categories</dsp:oparam>
                   <dsp:oparam name="output">
                        <dsp:a href="">//bydefault it will take its own file's name
                             <dsp:param name="itemId" param="element.repositoryId"/>                                                                                          <dsp:valueof param="element.displayName"/>
                        </dsp:a>
                   </dsp:oparam>                                             
                   </dsp:droplet>
                   <%-- This is show the Child Product --%>          
                   <dsp:droplet name=".............../ForEach">
                        <dsp:param name="array" param="element.childProducts"/>
                        <dsp:oparam name="outputStart">Child Products</dsp:oparam>
                                  <dsp:oparam name="output">
                                       <dsp:droplet name="................/ProductLookup">
                                            <dsp:param name="id" param="itemId"/>
                                            <dsp:param name="elementName" value="Prod"/>
                                            <dsp:oparam name="output">
                                                 <dsp:getvalueof id="img102" param="Prod.smallImage.url" idtype="java.lang.String">
                                                      <dsp:img height="250" width="250" src="<%=img102%>"/>
                                                 </dsp:getvalueof>
                                            </dsp:oparam>
                                       </dsp:droplet>
                                       <dsp:a href="productView.jsp">
                                            <dsp:param name="itemId" param="element.repositoryId"/>
                                            <dsp:valueof param="element.displayName"/>
                                       </dsp:a>
    Hope this helps.
    -RMishra

Maybe you are looking for