How to display like this

got it

use <cfoutput> with GROUP attribute.
details are in the CFML reference / livedocs.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

Similar Messages

How to do like this with array?

How to do like this with array?
I have 2 constants array put in main while loop ( array1{6,6}; array2{4,4} ). Those arrays will be come the input data for st in the small while loop inside.
The input data look like : [6,6],[4,4],[6,6],[4,4]...... I have to put input data to result array[8]. The method is:
input data result data
[6,6] --------------------------------------------> [6,6,0,0,0,0,0,0]
[4,4] --------------------------------------------> [6,6,4,4,0,0,0,0] ( this period, just add each element in new array)
[6,6] --------------------------------------------> [6,6,4,4,6,6,0,0]
[4,4] --------------------------------------------> [6,6,4,4,6,6,4,4]
[6,6,4,4,6,6,4,4] ( 1st period )
When the las index of result data array is filled in, I have to collapse the result data array to be this array:
----------> collapse: [6,4,6,4,0,0,0,0] ( take the average of 2 continuous element add to new result data array)
Next input data
[6,6] --------------------------------------------> [6,4,6,4,6,0,0,0]
[4,4] --------------------------------------------> [6,4,6,4,6,4,0,0] ( this period, add the average of 2 continuous elements in new array )
[6,6] --------------------------------------------> [6,4,6,4,6,4,6,0]
[4,4] --------------------------------------------> [6,4,6,4,6,4,6,4]
[6,4,6,4,6,4,6,4] ( 2 nd period)
----------> 2nd collapse [5,5,5,5,0,0,0,0] ( take the average of 2 continous element add to new result data array)
Next input data
[6,6] ....wait until input data has 4 elements
[4,4] -------------------------------------------------------------------------------------> [5,5,5,5,5,0,0,0]
[6,6] ....wait until input data has 4 elements
[4,4] -------------------------------------------------------------------------------------> [5,5,5,5,5,5,0,0]
[6,6] ....wait until input data has 4 elements
[4,4] -------------------------------------------------------------------------------------> [5,5,5,5,5,5,5,0]
[6,6] ....wait until input data has 4 elements
[4,4] -------------------------------------------------------------------------------------> [5,5,5,5,5,5,5,5]
[5,5,5,5,5,5,5,5] ( third period )
----------> 3rd collapse [5,5,5,5,0,0,0,0]
This wayl to make the tren graph.I made an VI to do that , but it's not yet correct.
Attachments:
tryyyyyyy.vi ‏39 KB
trend_mode.JPG ‏49 KB

Frankly, I don't understand your problem description or your VI.
In the description, the output array has a fixed size of 8 elements, is this correct? In this case you should initialize an array of 8 elements and do all operations "in place". I don't udnerstand the purpose of all the other code.
There are a lof of things that don't make any sense at all.
The second largest loop has no purpose, because it iterates only once per call
Sometimes you are concatenating an empty array to an existing array. This makes no difference.
Why is some of your data EXT representation???
What's up with complicated constructs such as that small loop shown in the picture. I show a somewhat simpler alternative.
Anyway, I have a hard time understanding your description. What should happen at the end? Do you have a link to a website that describes the algorithm? Does the algorithm have a name?
Message Edited by altenbach on 01-10-2008 09:55 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Simplify.png ‏5 KB

In XML Forms Date Format want to display like this (dd-MMM-YY)

Hi All,
I created one Custom Property for Date and use that property in XML Form Builder. In the RenderList that Date Field Display as (Medium Format) showing like this Apr 21, 2009 Format.
But i requirement is to display Date Field as like this 21-Apr-2009 (DD-MON-YEAR) Format.
In the Custom Property i set the
Additional Metadata (csv): + customFormat=dd.MMM.yyyy but this way is not working for XML Forms.(Refered this SAP NOTES:816761)
when the IE Browser language is English(United States) [en-us] Date Field Display as (Medium Format) showing like this Apr 21, 2009 Format.
But when the IE Browser language is English(canada) [en-ca] Date Field Display as (Medium Format) showing like this 21-Apr-2009 Format. so this way is not a right way..
I need to achieve this.. please help me.. Appreciate for helpful answer.
Regards
Thillai J

Thillai:
Refer to this post:
https://www.sdn.sap.com/irj/scn/thread?messageID=1166540
Hope this helps!

How to liquify like this

hey,
im trying to liquify a Times New Roman font like this (vhs fx)
the yellow, blue is just a layer copy i know.
so i need to pull the upper part .
anyone an idea how to do it like this :

1 ) Take a greyscale images of a water ripple/ create a ripple effect
3 ) Save it as displace.psd
4 ) Open the text/image you want to apple the effect and hit filters->displace
5 ) Load up the displace.psd and offset by so many px (have a play)
6) That'll get that ripple effect, you then need to spit the image into RGB and offset the layers a little to get that red/blue effect in the middle
Edit: Just noticed this was for illustrator- the above it for photoshop obviously, if you needed to do this in illustrator, then either do the adobe and trace it or use the warp symbol tool

How to masking like this?

as you can see at the picture, whenever the arrow move at the object, we can see what is inside . how to do like that? please help. iam sorry if this is in a wrong section.

on mouseover, move a mask to the 'inside' object that you want to reveal.
eg, over bigbird is redshirted person image that is masked by a displayobject that is not over the redshirted person until there's a mouseover. on mouseout, move the mask off the redshirted person.

How to Scribble like this?

I am trying to figure out the best way to approach drawings like this? I have tried the scribble tool, but I cannot get the color changes within the scribble. Also, the text looks hand drawn and it has white around it. I would like to make drawings like this that appear to be hand drawn and filled in, all by hand. Does anyone have any sugesstions?

Not exactly the same, a painting program or Photoshop with a mixer brush can make the same effect, but in Illustrator you can try the bristle brushes. I just grabbed one of the default bristle brushes painted with a few colors and transparency and at the end added a texturizing effect.

Why is youtube displaying like this?

http://img694.imageshack.us/img694/9196/screenshot20100207at508.png
i tried clearing the cache, didn't work. I tried resetting safari by deleting history,cookies, etc that also didn't work. I tried restarting, didn't work. I tried updating things via software update, that also didn't work. I tried turning off adblock, didn't work.
it is only like this on the main page, searching, and watching videos. If i go to someone's channel, it looks normal.
It only does this for safari, everything looks normal in firefox.
of course someone will say "well use firefox" but on a mac, i prefer to use safari.

HI,
Quit Safari.
Try uninstalling the reinstall a new copy of the Flash Player plugin..
Uninstall Flash
Install Flash
Since you are running Snow Leopard make sure Safari is running in 32-bit mode, not 64. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
Relaunch Safari.
Carolyn

Why is this page displaying like this?

I'm trying to convert this page so that the layout is based on server-side include files but since doing this the page is displaying incorrectly. What have i done wrong?
http://www.milesfunerals.com/donations_2.php

The error messages make it fairly clear what you have done wrong. The include files aren't where you say they should be.
The include commands are looking for files at ../includes/filename.php. They should probably be looking for includes/filename.php.

How to edit like this ?

Hi !
first of all, all the photos belong to the talented Yuval urbach !! they're not mine...
i would like to know how can i edit like that, cause obviously he uses the same tools and techniques on each photo..
so please can someone give me tips to edit my photos like that ?
like what tools did he use ? cure tool? selective color? what?

You can try the retoucher's forum at Model Mayhem, they love to analyze post processing techniques. But registering an account at MM takes more than an email, you have to have some of you own work, with models, to create an account. But your work can be anything - modeling, photography, retouching, makeup. Just make sure you either own the artwork or have permission to post it.
That said, often what makes photographers stick out from the rest is their style. People spend a lot of time developing their style, in post production as well as behind the lens. It's unlikely you're going to mimic someone's style with a few presets or a quick tweak of a slider or two. And probably more unlikely that the photographer will tell you their recipe.

Can Someone Explain How Xorg Works Like This?

My friend uses Ubuntu, and this is his xorg.conf .
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
I know it says
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
but still. Can someone enlighten me?

I may be missing something but it seems that your friend doesn't need an xorg.conf at all (if that xorg.conf works for him). In fact, until the recent Xorg upgrade, my desktop didn't need an xorg.conf either. What, exactly, is the cause of your bewilderment?
Last edited by string (2008-12-04 23:07:42)

How can I export the same quality like this video ?

I found this video and upload here :
http://www.mediafire.com/?4uoygmlvfm5uccu
HD 720p
and the file size is very small : 3.87 MB with length : 38s but has very good quality.
Does anyone know how to render like this ?

I can only guess what you want exactly.
To make the top menu item move left when the cursor overs above it tou could do something like:
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible {
margin-left: -3em;
width: 8em;
I hope this helps.
Ben

How to display three months data in ALV grid control

Hi
Thanks for all.I have tried now it is working but as per requirement month name and cumulative total will display like this format.cumulative total means month1amount+ month2amount+month3amount.And one more thing month range will change some times means sometimes i will give January date to march date and sometimes i will give July date to October date. but date range is same means between dates range is three months.
please tell me how to display.
GAS PRESSURE WELDING COST EFFECTIVENESS                                        Dec-11                         Cummulativetotal
Sr. No             Item             Unit           Rate          Qty           Amount
GAS PRESSURE WELDING COST EFFECTIVENESS                                      Jan-12
Sr. No             Item             Unit           Rate          Qty           Amount
GAS PRESSURE WELDING COST EFFECTIVENESS                                     Feb-12
Sr. No             Item             Unit           Rate          Qty           Amount
Thanks & Regards,
Vasu.
Moderator message: only one thread per issue, please.
Edited by: Thomas Zloch on Feb 20, 2012

Hi
Thanks for all.I have tried now it is working but as per requirement month name and cumulative total will display like this format.cumulative total means month1amount+ month2amount+month3amount.And one more thing month range will change some times means sometimes i will give January date to march date and sometimes i will give July date to October date. but date range is same means between dates range is three months.
please tell me how to display.
GAS PRESSURE WELDING COST EFFECTIVENESS                                        Dec-11                         Cummulativetotal
Sr. No             Item             Unit           Rate          Qty           Amount
GAS PRESSURE WELDING COST EFFECTIVENESS                                      Jan-12
Sr. No             Item             Unit           Rate          Qty           Amount
GAS PRESSURE WELDING COST EFFECTIVENESS                                     Feb-12
Sr. No             Item             Unit           Rate          Qty           Amount
Thanks & Regards,
Vasu.
Moderator message: only one thread per issue, please.
Edited by: Thomas Zloch on Feb 20, 2012

How to display text in colour and arrange radiobuttons in sequence

Hi all,
according to my requirement the screen should be appear like this Rate Caregory in green colour
under this Select Action should be displayed in blue colour
under this three radiobuttons should be displayed like this sequence
copy Massupload Automated Rate Processing if copy radiobutton is selected remaining should be disabled.
but for me the radiobuttons are displaying one by one i have to display it in the above sequence manner.
kindly send me the steps how to achieve this functionality.
Thanks & Regards,
Naveen

data nodeinf type ref to if_wd_context_node_info.
data node type ref to if_wd_context_node.
node = wd_context->get_child_node( 'ZRADIO' ). "ZRADIO is the node name
nodeinf = node->get_node_info( ).
data lt_vs type table of WDR_CONTEXT_ATTR_VALUE.
data ls_vs type WDR_CONTEXT_ATTR_VALUE.
ls_vs-text = 'Copy'.
ls_vs-value = '1'.
append ls_vs to lt_vs.
You dont need to write this code. just give '1' in the key to select porperty of the radio button.'
and create on label also for each radio button. three labels for three radio buttons.
and as you said if i create an attribute name flag type wdy_boolean and if i bind it readonly property of all radiobuttons.suppose if i select copy radiobutton remaining two will be disabled.
actually it will disable all the three radio buttons.
but in anycase your requirement is that user should not be able to select the other radio buttons once he has selected one.
that requirement will be fulfilled by this.
thanks
sarbjeet singh

How to display the results of the grouping horizontally

Hello,
I still cannot understand what am I doing wrong when trying to display the results of the grouping horizontally. Here is the original thread: How to group report vertically
In the Section expert, for Detail section, I check the box Format with Multiple columns. Under the Layout tab, I check Format groups with multiple columns and set the width of the column at 3.3 in. This should give me 3 columns for Landscape orientation.
Now if I select Printing direction Down then Across, I just have the regular vertical grouping.
If I check Across then Down, then I do get 3 columns, but all the records in the Detail section are also spread across first instead of staying in the column.
There should be something else that I should do to get the display like this:
Header1    Header2    Header3
record11   record21   record31
record12   record22   record32
record13   record23   record33
etc.            etc.            etc.
Thank you.

I'm not at all sure columns are gonna help here, as there is no way that I am aware of to tell Crystal to start a new column.
The only way that I can think of to achieve what you are trying to accomplish is to do something like this:
In your group header's Suppress formula, keep track of the first (/ next) three groups that you want to print, using something like (basic syntax):
global grouplist(3) as string
global groupcount as number
groupcount = groupcount + 1
grouplist(groupcount) = {db.GroupingField}
' The NextIsNull below implies End-of-Data...
if groupcount = 3 or NextIsNull({db.GroupField}) then
formula = false ' print the group header
else
formula = true ' suppress the group header
end if
Then, create three formula fields to get each value in grouplist(). The group header format will then show the three formula fields. Underneath these three formula fields, add subreports, which will show the details for one specific group. The subreports should have a parameter for which group's details to show. Use the three formula fields as the link to the three subreports.
In the group footer, clear out the grouplist() array, and set groupcount to zero.
This report will take a while to run, because having three subreports next to each other makes it difficult for Crystal to determine page formatting.
HTH,
Carl

Properties bar font changed itself... How do I fix this?

I'm having trouble with my Dreamweaver. Opened the program a few days ago and the application font at the bottom properties bar is illegible. The font is also displayed like this when I open up page properties. I have tried changing the Font properties in the Preferences pane but that doesn't affect it. I'm attaching an image to show what I mean.
Anyone have this happen or know how to fix it? I tried clearing my Mac's font cache but that didn't help.
I am running Dreamweaver CS5 and Snow Leopard.
--Emily

I suggest try to change your configurations to look like this:
Let us know if this solved the problem.
Good luck.

How to display like this

Similar Messages

Maybe you are looking for