How to display Material in decision task?

Hi Experts,
I want to display a material data in a WF decision task. In the spec they ask a "link".
I think the only way to do this - without process the workflow - is to create an attachment, with the Business Object: BUS1001, and with the material number as key. (Of course if you know something better, than it is also good for me)
I have a program which starts the WF, and I want to fill up the WF container from this program.
Please help me in, how should I write the code, if I know just the material number?
Please give me code sample if it is possible.
Thanks in advanced, Csaba.

Hi,
I am not sure how to the display method behaves in the BO BUS1001. You can try using that.
Or a work around solution would be create a custom method. In that
you set the material number field in the MM03 screen with the object-key.
Then use call transaction 'MM03' and skip first screen.
Hope it helps.
Regards,
Raj

Similar Messages

Display table on Decision Task for Outlook

Hi Guru's
I've gone through the documentation for Display table on Decision Task and i'd like to know which of the suggested solutions was used to create the desired output and could i please have the steps taken to actually achieve a tabular layout of a decision appearing in the Outlook inbox in the same format please Help step by step.
thanks
Regards Tatenda

Hi there
I've gone thru that definition but what i would like to understand is which of the 2 methods where the solutions to the problem there is one by Pavan and the other by Alessandro and with alessanrdo's solution which i have been trying to impliment i would like to know where the actual modification or placing of the HTML code should be done.
Regards
Tatenda

How to display material description in fbl3n report

Hi friends,
my reqirement is to disaply equipment no , equipment description ,and meterial description based on material number.
so i added equipment no and equipment description .but i am adding material description from makt tabel mantr maktx based on RFPOSXEXT struture component u_matnr but i am not getting any value from this structure before displaying
lt_pos type standard table of rfposxext.
select matnr maktx from makt
        into table gt_makt for all entries in lt_pos
        where matnr eq lt_pos-u_matnr
         and spras eq sy-langu.
      after i am using field symbole to assining this to it_pos[].
call function 'FI_ITEMS_DISPLAY'
    exporting
      caller_repid = c_repid_gl
      acctype       = c_koart_gl
      x_opvw        = x_gl_opvw
      x_change      = x_change
      i_u_save      = gd_alvsave
      is_u_variant = gs_variant
      it_u_fieldcat = gt_fieldcat[]
      it_kontab     = it_accts[]
      it_slbtab     = it_comps[]
      it_t001       = it_h_t001[]
      it_skat       = it_h_skat[]
      it_skb1       = it_h_skb1[]
      x_grid        = x_grid
      x_inet        = pa_inet
    tables
      it_items      = it_pos.
so please help me.
regards,
siva

Solved by my self .
thans
siva

How to display contents of update tasks more comfortable?

Hello,
periodically I send an information about failed update tasks (SM13) to our users, and I offer to send more details if necessary. Of course some users want to get more details, and then I go in SM13 through every single update tasks, every single function module in it and every single data / internal tables and make an extract as a text file. This is very annoying. Is there a way which is faster and more comfortable, maybe a program which dumps the contents of a update tasks as a list?
Thanks in advance
Jens Hoetger

Hi Jens,
For every failed update there will be a system log(SM21) and short dump(ST22)generated.This can give a detailed view on the table, function modules and related stuffs.
There is one more option from SM13 you can get the Update key (VBKEY), Take this VBKey and go to table VBHDR through SM16, paste the key and execute you will get the details of the WP,user,Function module, Reports used, Table accessed etc.
Hope this can help you
Regards
Ashly.

How to set material in ME51N

Hi All,
we have created one customzied screen, in this screen we are entering material no. based on this we are getting stock details for this material.
here requriement is once i double click on material , this materail has to show in ME51N item level.
through set parameter id we are able to link to MM02 & MM03 but set parameter id is working for me51n ,please tell me how to display material in ME51N.
Thanks in advance.

Hi,
Please check the below link. It might help you.
http://www.slps.org/slps_processes/2/Master%20Document%20Link/purchasing/PurchasingDocsP001_P019/PUR-006%20Create%20A%20Purchase%20Requisition%20(FO)%20-%20ME51N.pdf
with regards,
Mamta

Regarding creation of generic user decision task in workfow

Hi,
Can any one please guide me how to create generic user decision task in workfow?

Hello,
Just go into the workflow builder and create a new step. Choose a Decision Step and it will make one with the generic decision task, TS00008267. Just fill in what the options are and who it should go to. The task text starts with the very generic:
Choose one of the decision options given. This completes the
processing of this step.
regards
Rick Bakker
Hanabi Technology

How to display how many days my tasks is late?

Hi All,
I'm looking for decision how to display the number of days in my project and for any task that is late, according to progress line. I can display the progress line, I can insert the new field with
status but I need to display how many days of some tasks are late?Thanks :)
Boriana Petrova MCT, MCTS, MCITP, MOS- Master

Hi Boriana,
Progress line and finish variance are 2 different features:
Progress line is calculated based on the status date or any given progress date,
Finish variance is calculated as follow : finish - baseline finish
Thus it might be the expected behavior to have a progress line showing different information than the finish variance.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to display a pdf document in an ADF Task Flow?

I have a requirement where I need to display a pdf doc in RHS task flow, upon a linked clicked on LHS task flow. Passing the pdf doc name is what I know already. All I need to know is, how to display the pdf doc in a task flow.
Remember, I don't want to display this as a "POP-UP".
Appreciate help on this!
Edited by: Yousuf Baig on Mar 9, 2013 9:01 PM

try like this...
<af:panelSplitter id="ps1" orientation="horizontal"
<f:facet name="first">
<f:facet name="second">
<af:panelHeader
<af:region....(have a fragment and use fileDownloadActionListener)
</af:panelHeader>
</f:facet>
</af:panelSplitter>

How to display my country flag on the task bar in osx mavericks?

How to display my country flag on the task bar in osx mavericks?

System Preferences > Keyboard > Input Sources
Checkmark the box beside "Show Input menu in menu bar".

How to display task descriptions in shopping cart approval screen

Hi,
We are implementing SRM 7.01.
We'd like to display descriptions of shopping cart approval task,
which is defined in:
transaction: PFTC
in the 'Description' tab
Text type : 0120 Task Description
Currently only work item text is displayed in the UWL.
Does anybody now how to display descriptions?
Regards,
Mio

Problem solved.
I needed to do some settings in portal view.

How can you change the display size on the task bar

how do you change the display size on the task bar

If, however, you want to change the size of the display of the menubar, meaning make the icons and text larger, there is no way to do that directly other than to change the resolution of the screen.
You can change the as-viewed size of that temporarily by using either -
• Mouse zoom - if you have a Magic Mouse (Apple wireless mouse), hold down the Control key and use the scroll up and scroll down finger gestures on the mouse.
• Zoom - go to System Preferences > Universal Access > Seeing and turn on Zoom. You can also use the noted keyboard shortcut to enable/disable this Zoom feature.

How do I reverse my decision to have firefox remember and display my username and password for a particular website?

When I go to a website that requires user-name & password I enter them and then Firefox pops up "do you want firefox to remember your user-name & password for this site".
I made the mistake of clicking "yes" and now when I go there the site comes us with both. I have several user names & passwords for some sites and now I don't want firefox to remember them. So, how do I reverse my decision to have firefox remember and display my user name and password for a particular website?

Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* http://kb.mozillazine.org/Deleting_autocomplete_entries
* [[Remembering passwords]]

Passing event parameters to copy of DECISION task TS20000118

Hi.
I have made a copy of the decision task TS20000118 which is the standard approve/reject user decision step.
In the decision step, i have a link to ME13 transaction which is done by passing object_id and giving the "display" method as default method for the ZBUS3003 object which takes Info record number as key.
My problem is users are restrcited by PORG auth object in ME13 also and along with Info record number, i have to pass porg, plant, vendor , material to ME13 link.
I have defined event parameters to capture this 4 fields but i dont know where to pass this parameters as TS20000118 where the link appears in using the DECISION object and not the DISPLAY method,.
I dont want to make this 4 fields as object key because it will mean altering many other things. Also, int he DISPLAY method based on info record number i cannot retrieve 4 fields bcos there mioght be multiple records for same info record number.
Appreciate if you can let me know how i can pass event parameters to ME12 link in DECISION step of Task TS20000118 .
Regards
PN.

Hello user12628! I have the same problem. Did you solve it? I have dynamically generated size of my Event Parameter String[] mass. And some times I have Error that URL string very long :). That is why I want to use POST method instead GET. if you has found solution,please let me know.
Message was edited by:
kostik

In Decision task, Method defined after execution is not called from Portal

Dear All,
In one of my scenarios, I am using a decision task for approval.
In that after the approval action is taken i am calling a BAPI to update business function.
I have called this BAPI in the Methods ( After Workitem Execution ) .
When I execute this task from the SAP Inbox , the method is getting called successfully and the BAPI is also executed successfully. But when I approve the task from portal this method is not getting called at all, and BAPI also fails.
Actually in the workitem display , I am using the standard FM SWU2_INPLACE_DECISION_PROCESS, will it have any impact when its used from Portal ?
Is there any common place that will be called from both SAP Inbox and Portal after the task execution , so that based on the decision taken , I can process the action at the same place.
Advance thanks for your response.
regards,
Sabari Prabhu.

Hello,
Unfortunately, that I know, there is no way to call your BAPI if you're using the standard decision JavaWD. In fact all that WD does is calling a WAPI to read the decision alternatives and then once the user has taken his decision it calls another WAPI to feedback the decision into the backend.
The blog mentionned by Pavan concerns only the secondary methods with amodal call, this is different from the before and after methods which are not supported and cannot help you for calling your BAPI. The so-called "Program exits" are not supported either.
The only alternatives I can see for you are:
- Develop your own decision screen specific for your workflow and integrate there your BAPI call. This would also give you more flexibility to show your agents the information they need to take their decision. This is the way I usually go for now.
- Change your UWL settings so that decisions are processed in a GUI screen instead of the JAVA WD screen. The main disadvantage is that you can do this either for all decision or for none of them. You can't just set that up for the decision in your specific workflow (or at least I haven't found how to do it).
To change the way decisons are processed in UWL you must first change the parameter "List of preview sections to hide" in your UWL iView to add value USERDECISION.
Then you must create a custom XML config file (or modify an existing one) in which you must customize each decision task used in your company individualy. To do that just take a standard config file and find the Item type entry for a standard decision task as an example. All you have to do is to recreate the same entry for each of the decision tasks you actually use and replace the defaultAction="viewDetail" parameter by defaultAction="launchSAPAction".
Cheers,
Patrick

Can't configure SWU3 Classify Decision Task as General in Quality

Hello Workflow Gurus,
I have successfully completed SWU3 configuration in development, however, in quality I am not able to. I have not been able to complete two tasks:
Classify Decision Task as General
Document Generation/Form Integration
I can not configure these two manually or automatically, I get the following message:
Client 700 has status 'not modifiable'. Choose 'Display object' or 'Cancel'.
How can I configure these two tasks in quality?
Me, as workflow and ABAP consultant and a BASIS contact have tried to configure this. Thanks for any help in advance, points will be awarded.
Best Regards,
Gustavo Yong

Hi Gustavo
Please check with basis if its okay to transport a TR just from Q to P.
Normally, SWU3 config asking for transport happens based on the settings you chose in SCC4. Now for your case, there was no TR from Dev, but one from Q -> check with basis if it will not cause any conflicts.
Else you have this solution available when production is setup first.
Regards,
Modak

How to display Material in decision task?

Similar Messages

Maybe you are looking for