How to display Parent Sites in the breadcrumb without duplicates?

My SP2010 breadcrumb is showing current site>current items under the current subsite.
When I am on the parent site, it shows Home > Home (I would like it to show just Home).
The original v4.master code was:
<td class="s4-titlelogo">
          <SharePoint:SPLinkButton runat="server" NavigateUrl="~site/" id="onetidProjectPropertyTitleGraphic">
           <SharePoint:SiteLogoImage name="onetidHeadbnnr0" id="onetidHeadbnnr2" LogoImageUrl="/_layouts/images/siteIcon.png" runat="server"/>
          </SharePoint:SPLinkButton>
         </td>
I have tried the approach of deleting the above code and replacing it with:
<asp:SiteMapPath      runat="server"      SiteMapProviders="SPSiteMapProvider,SPXmlContentMapProvider"      RenderCurrentNodeAsLink="false"      NodeStyle-CssClass="breadcrumbNode"
CurrentNodeStyle-CssClass="breadcrumbCurrentNode"      RootNodeStyle-CssClass="breadcrumbRootNode"      HideInteriorRootNodes="true"      SkipLinkText=""/>
HOWEVER when I do this, I get the following breadcrumb; Home > Home > Current Site > Current content
The first "Home" appears in tiny text above the site logo.
... Ideas anyone?

Hi ,
Please back up your v4.master page firstly, and then replace the below code in your v4.master page,
<asp:ContentPlaceHolder id="PlaceHolderSiteName" runat="server">
<SharePoint:SPLinkButton runat="server" NavigateUrl="~site/" id="onetidProjectPropertyTitle">
<SharePoint:ProjectProperty Property="Title" runat="server" />
</SharePoint:SPLinkButton>
</asp:ContentPlaceHolder>
with this code,
<asp:SiteMapPath
runat="server"
SiteMapProviders="SPSiteMapProvider,SPXmlContentMapProvider"
RenderCurrentNodeAsLink="false"
NodeStyle-CssClass="breadcrumbNode"
CurrentNodeStyle-CssClass="breadcrumbCurrentNode"
RootNodeStyle-CssClass="breadcrumbRootNode"
HideInteriorRootNodes="true"
SkipLinkText=""/>
Here is a similar post,
http://sharepoint.stackexchange.com/questions/11480/breadcrumb-not-showing-parent-site
Thanks
Daniel Yang
TechNet Community Support

Similar Messages

How to display data elements in the tempalte header

Hello friends
i've this date_from and date_to parameters which are date parameters that user enters..
based on these date parameters I want to display them in the header as
day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
16-nov-2010.(date-1's day)
so it should break down to
date_from-13-nov-2010, 13
date_to- 16-nov-2010, 15
I want these two values to be displayed in the header of the template how to do this
pls help
also let me know how to display data elements in the template header
Edited by: erp on Dec 22, 2010 12:44 AM

Hi Ananth..Thanks for ur timely reply
Can I use it with <? substring(':date_from',1,2)?>
where date_from is an input parameter which user enters at the run time of the report.
I've to capture the date entered by the user and print it in the header..
Pls reply

How to display link content on the the same sharepoint page on click event

"How to display link content on the the same sharepoint page on click event"
Detail:
we are using a document library where all html files are stored/uploaded. we would like to display/open the html file on the same sharepoint page where all the files are listed.
Thanks.

Use jQuery and set the target to self to the anchor tag
Regards,
Sairam Avacorp Technologies

Adobe Connect: how to display a picture in the WebCam pod when not sharing video

Adobe Connect: how to display a picture in the WebCam pod when not sharing video

The WebCam pod can pause a live video showing a static image. However, I believe that you are looking to use a Share pod, where you can upload a JPG or PNG image. Just place the share pod with the image where you would have the Camera pod.

Disabled Yahoo icon. How do I get rid of the icon without hiding it?

Okay so on my previous BB I had my work and Yahoo e-mail set up. Later I disabled the Yahoo e-mail and I remember then it was tough to figure out how to do that and delete the icon. I figured it out though.
Now I synced to my new 8900 and the Yahoo icon is there again. It's not receiving or sending e-mail which is fine, but how do I get rid of the icon without having to hide it? I want it gone forever!
Thanks!
Solved!
Go to Solution.

You must delete that yahoo email account from your carrier's BIS site:
http://www.blackberryfaq.com/index.php/How_to_add_/_delete_email_addresses
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Iwant to buy iphone 4g from apple website but how i can do it iwant the iphone without simcard

iwant to buy iphone 4g from apple website but how i can do it iwant the iphone without simcard
i live in saudi arabia
can i buy the phone from the site
if i can buy iphone 4 from this site can the store send to the saudi post in usa i will send the location if it posible
Thanks !

ooks but when i select the iphone shop i find page and iphone avible on at&t
its noraml i want the iphone without sim card not want at&t
so i have the saudi post adress in usa can the site send to thier?
Thanks 4 support

I just got the mid 2011 macbook air and it does not have ilife or iPhoto on it...isnt it supposed to come with it? and if it does then how do i get it on the mac without having to pay for it in the app store?

I just got a macbook air and i thought that it was supposed to come with ilife already installed? But there is not ilife apps...how do i get it on the laptop without having to buy them all from the app store if it was supposed to come with it?

From the iPhoto Licence:
3. Transfer.
A. Apple Software obtained from the Mac App Store is not transferable. If you sell your Apple-branded hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so.
B. For any preinstalled Apple Software, you may make a one-time permanent transfer of all of your license rights to the Apple Software (in its original form as provided by Apple) to another party, provided that: the Apple Software is transferred together with your Apple-branded hardware; (ii) the transfer must include all of the Apple Software, including all its component parts, printed materials and this License; (iii) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; (iv) you have not associated the Apple Software with your Mac App Store account as set forth in Section 2B; and (v) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License.
If the previous owner accepted the preinstalled software (iPhoto, etc) to the AppleID, it cannot be passed on to a new owner. Even if the previous owed would use her or his Applied to install it for you, you would never be able to reinstall it or to update it.
In that case buy your own copies of the software.

Since I synced my ipad to my iMac I have duplicate photos appearing in the Photo section on my iPad and one can be trashed but the other one can't. How can I get rid of the ones without the trashcan?

Since I synced my ipad to my iMac I have duplicate photos appearing in the Photo section on my iPad and one can be trashed but the other one can't. How can I get rid of the ones without the trashcan?

Thanks so much. I was afraid to mess with that. But when I unsynced them, it worked.

How can you delete songs off the ipod without deleting songs off your itunes library?

How can you delete songs off the ipod without deleting songs off your itunes library? My son's ipod automatically synced all the songs in my library to his ipod which he now wants to get rid of. Is there a way to delete them all without me having to erase my library?

Do not select the songs to sync, then sync.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

Display drop down in the breadcrumbs region

How can I display a drop down in the breadcrumbs region on opposite side of the breadcrumb entry? I have played with Displayed and element properties of the drop down but did not made any difference. The Drop down is displaying right below the breadcrumb entry. Any help is greatly appreciated.

Hi,
Try:
1 - Create an HTML region in "Page Template Region Position 1" and set it to Column 2
2 - In the "Region HTML table cell attributes" setting, put: align=right
3 - Put your select list in this new region and set the Label Alignment to Right and the Horizontal/Vertical Alignment to Right
As long as your breadcrumbs are in the region position, they will be on the left and your select list will be on the right as setting the new region to Column 2 splits the row into two cells and the remaining settings above just ensure that everything is displayed to the right of the second column.
Andy

How to display all site collections to users for site access

Currently when our users clients/internal log in, they are directed to a site directory. The site directory only displays sites that the users have access too. Which is great because I don't want our clients to see our entire client list.
Currently we have one site collection with 700+ sites.
We are changing the architecture of our SharePoint environment to create a new site collection for each client. So, we may have 700+ site collections in one web application.
My question is, how can I display all site collections to our user for access, similar to a site directory?
Any help would be greatly appreciated.
Thanks,

This is not possible OOTB. your requirement is get the list of all site collections on root site then security trim( which means user can see only the sites where they have permission.)
I think this required alot of effort(developing a solutions and checking the permission on all sites). Issue is you have more than 700 sites collections and tons of user for each site collections and also 700+ clients.
May be think about creating a list and fill that with all site collections(using script). then trim configure the item level permission( but lot of work).
if you have user profile services then may be check about the memberships feature.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to display multiple reports at the same time

Hi,
I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
call_report('report1');
call_report('report2');
call_report('report3');
call_report('report4');
The main problem is that, just the last report is been displayed.
Is there some way to display report1, report2 etc in separate tabs or windows ??
Regards
Carlos

You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
The question is how you are calling the report.
Here is how I manipulate it.
After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

How to display text value in the header data (Header text) of credit memo

Hi...
I need to display the text value of the text field in the header text of the header data in credit memo.
The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
Appreciate your help on how to do this...
Thansk and will surely reward the points..
Kanthi..

Hi kanthi ,
Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
Please award if useful.

How to display Parent Sites in the breadcrumb without duplicates?

Similar Messages

Maybe you are looking for