How to display pie chart in smart forms

hii experts,
my requirement is to display pi chart in smart forms . i have googled but could not get any meaning full results. If any one knows this pls share ..
Thanks and Regards
Aditya Shrivastava

Hi
I really doubt If you did search at all in the first place. Anyhow, check this:
https://www.sdn.sap.com/irj/scn/advancedsearch?query=piechartin+smartforms&cat=sdn_all
Vishwa.

Similar Messages

Dynamic Pie Chart in Smart Form

Hi Frn's ,
How can i show the dynamic Pie chart in Smartform .
Thanks and Regards
Priyank Dixit

Hi,
Refer to this link [How to display pie chart in smart forms|Re: how to display pie chart in smart forms]

How to display TEXT vertically in SMART FORM

Hai,
I need to display the column name of a table vertically (readable from bottom to top) in smart form.
Could any one please tell me how to do this?
Thanks & Best Regards,
Maniyam Bhaskar.

Hi,
Go through these threads for the discussions happened on similar issue... hope it helps you..
how to print text vertically in smart forms
vertical and horizontal printing in same page with smartforms or sapscript
Good luck
Narin

How to display multiple records in smart forms in new page for each record

Hi,
How to display the data from a internal table in a smart form.
I want each record to be displayed in seperate page.
please tell me with example.
thank u,
Sarath

Do this ,
in the main window - open a loop on your internal table ,
within the loop open the text and give the output fields,
after this text use the Command node and in this set the next page as page1,
so when the loop gets executed its first record will be on the first page and the second record will be on the next page and so on ..
Reward to usefull answers.

How to display PIE chart Axis label horizontally?

Hi
Currently my PIE chart axis label is displying in 2 lines. How make it to display in one line?
Thank you

hi,
For Pie chart there will be no X-axis or Y-axis terms generally.
Label/Text could be one of the following.
Title?
or Sub Title?
or Foot note?
Right Click -> Format Title . Reduce the font size such that it fits into a single line.
Regards,
Vamsee

How to display multiple pages in smart forms

Hi Experts,
I am facing one problem in Smartforms. here i am using one page & main window, Mainwindow consists one TABLE, it contains 100 records. While printing this smartform, i am getting only one page and mainwindow was filled with only 80 records...remaining 20 records has to display in 2nd page but it was not displaying 2nd page at all.
Can any one please help me.
Thanks,
sreelakshmi.

Hi,
Use the same page name in the general attributes-> next page of your created page.
Thanks
Arul.

I need to display pie chart data tips at specified location instead of default location?

I need to display pie chart data tips at specified location instead of default location?
can any body let me know how to do that?
thanks guys.

Hi,
Check this thread.
Log for J2EE Web Services?
Regards,
Harini S

How do i place box in smart form

hi all,
how do i place box in smart form?please help.

write the following commands in ur text editor of the window for which u want to display the box...
POSITION WINDOW
SIZE WINDOW
BOX FRAME 10 TW
the code will automatically position and size the box according to the window size and position as placed in the screen painter...
reward if helpful
regards
niharika

How to write source code in smart forms?

hi friends,
can anyone can help me in writing sorcecode in smartforms r
any materail link.
if it is helpful points can b rewarded.Thanks in advance.

Hi,
Check this link for
how to write source code in smart forms?
http://****************/Tutorials/Smartforms/GettingStarted/SimpleText.htm
You can write Source Code in smartforms By Choosing Program Lines.
Check this link with Screen Shots
http://****************/Tutorials/Smartforms/PO/page1.htm
Reward All Helpfull Answers
Regards
Fareedas
Edited by: Fareeda Tabassum S on May 21, 2008 3:09 PM

How to Display an Image on my FORM

Good Day!
I would like to ask some help from you guys with my problem on how to display an image on my form. I would like to display my uploaded image on my form but instead of an image, the get_blob_file is showing. By the way, I'm using Apex 4.1
I downloaded the Order Entry Sample Application and followed the Page 6, the Product Details. I even made snapshots of each details from Page Rendering to Page Processing in order not to miss a thing.
At the moment, I was able to upload or store the image on my created Oracle table and also able to retrieve it on the Download Link Text with Content Disposition value of Inline, provided by APEX Settings. If I invoke the Download link beside the file browser, a page with the image will be shown, below is the address:
http://127.0.0.1:8080/apex/apex_util.get_blob_file?a=200&s=339877802936975&p=230&d=7107921433296839&i=7107601420296838&p_pk1=54&p_pk2=&p_ck=7D6512D967336C4B94258EEA3CDF1BE6&p_content_disposition=inline
However, instead of showing the image on a region, below is the one showing on my Form:
<img src="apex_util.get_blob_file?a=200&s=339877802936975&p=230&d=7107921433296839&i=7107601420296838&p_pk1=54&p_pk2=&p_ck=7D6512D967336C4B94258EEA3CDF1BE6" />
As you can see the parameter values are the same but I know I missed something that's why I'm here :)
I would highly appreciate all the help you can provide and many thanks in advance.
I tried to change gear by making an html region of type PL/SQL (anonymous block) and a procedure but still no image :(
Below are the scripts.
declare
cursor cur is
select *
from wsemployee
where empid = :P230_EMPID;
begin
for rec in cur
loop
IF rec.mime_type is not null or rec.mime_type != '' THEN
htp.p( '<img src="my_image_display?p_image_id='||NVL(rec.empid,0)||'" height="'||100||'"/>' );
else
htp.p( 'No Image ');
END IF;
htp.p( ' ');
end loop;
end;
PROCEDURE
create or replace PROCEDURE my_image_display( p_image_id IN NUMBER)
AS
l_mime VARCHAR2 (255);
l_length NUMBER;
l_file_name VARCHAR2 (2000);
lob_loc BLOB;
BEGIN
SELECT MIME_TYPE, PHOTO_BLOB_CONTENT, PHOTO_FILENAME,DBMS_LOB.GETLENGTH(photo_blob_content)
INTO l_mime,lob_loc,l_file_name,l_length
FROM wsemployee
WHERE empid = p_image_id;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header( nvl(l_mime,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || l_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(l_file_name,instr(l_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
END my_image_display;
Edited by: user13831927 on Dec 22, 2012 3:24 PM

Hi Ying,
you can add a UDF to the table spp2 with a programm
but the table is not yet listed in the 'Manage User Fields' form.
there's no way to "enable" it - sorry

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to Print Digital Signature in Smart forms.

Hi Experts,
Any one please help me how to use digital signatures in SMARTFORMS.?
Which are the tables used to store digital signatures and please any one have any demo program which prints the the digital signature using smartforms kindly let me know.
Thanks,
Sunil kairam.

Hi Sunil,
After doing some research in sdn and other sources i found the following result...
Digital Signatures are nothing but graphics that we can store in SAP and use in our Smart Forms.
For Example you can create a .bmp file of your signatures, upload it via SE78, and then use it in your Smart Forms in your Footer Area as "Authorized Signatory".
The Logic in the Print Program can be something as follows -
1. Maintain a Z Table having fields like PLANT, FORMID (Name of the SmartForm), USERID.
2. Before calling the Form, the validation is made for the Logged in User with the Z Table created.
3. If the User Entry exists in the Z-Table, the Form is called and the Signature Image is displayed in the Footer Block i.e. the Authorized Signature.
4. If user entry does not exist in the Z-Table then the message is displayed "You are not the Authorized for Printing the Form" and exits the Transaction.
refer to these links:
[http://help.sap.com/saphelp_nw04s/helpdata/en/23/c8b4cb4b3847a9bc32fe100f368411/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/21/530b37cb3ed605e10000009b38f936/frameset.htm]
if u find some info on the topic pls let me know..
best of luck!!!
thanks
ravi

How to call text editors in smart forms?

In my module pool program,I included text editors for three fields.I want that fields in smart forms too.I need to know how these text editors are called in smart forms?

Hi achu,
Any text that gets saved has a corresponding entry in table STXH table. It usually has the following parameters : TDOBJECT,TDNAME,TDID and TDSPRAS.
What you have to do is create a new text element and under general attributes ---> Type - give Include Text.
And in the include text you give the above four parameters which correspond to the text you want to display.
P.S. Do not forget to check the 'No error if no text exists' checkbox.
Hope this helps.
Regards,
Arun

Display pie charts

I have a problem!
I had to create a pie chart. So I tried to create one. But at the end when I want to test it, I only get a "X" (picture not available) on the site. If I use the same data I used for creating the pie chart for creating a "normal" chart, it will works.
Now my question, how can I display a pie chart?
(I hope you4ll understand, I4m not very good in english)
Tanja

Hi Tanja,
It's not a problem .Pie charts ,if you look in the global settings it clearly says that it is a beta version .So Oracle does not give us any guarantee for those features.Pie charts are under Beta version for the last many months.Every time they will say that will work in the next version, but even to day it is a beta feature..
Thanks
Vishnu

How to retrieve pie chart wedge id

Hi.
I'm trying to figure out how to get an id or index of a specific wedge from a pie chart
I think I'm close. I just need to find the right path to the wedge id.
This is what I have so far.
<fx:Script><![CDATA[
        import mx.charts.events.ChartItemEvent;
        private function itemClickHandler(e:ChartItemEvent):void {
            var selectedIndx:String= e.currentTarget.series.index; //<--returns null
    ]]></fx:Script>
<s:VGroup>
        <mx:PieChart width="220" height="220" id="piechart1"
                     dataProvider="{srv.lastResult.AAFunds.fundName}"
                     itemClick="itemClickHandler(event)"
                     >
            <mx:series>
                <mx:PieSeries displayName="pie series 1" />
            </mx:series>
        </mx:PieChart>
    </s:VGroup>

Figured it out.
Here is a simple example;
<?xml version="1.0" encoding="utf-8"?>

<s:Application
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    xmlns:s="library://ns.adobe.com/flex/spark"
    >
    <fx:Declarations>
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.charts.series.items.PieSeriesItem;
            import mx.charts.events.ChartItemEvent;
            [Bindable]
            public var chartDP:Array = [
                {wedgeName:'Pie wedge 1', percent:45 },
                {wedgeName:'Pie wedge 2', percent:25},
                {wedgeName:'Pie wedge 5', percent:22},
                {wedgeName:'Pie wedge 4', percent:8}
            private function pieChart_itemClick(evt:ChartItemEvent):void {
                var psi:PieSeriesItem = evt.hitData.chartItem as PieSeriesItem;
                myTextArea.text += "\rwedgeName: "+psi.item.wedgeName+" percent: "+ psi.item.percent;
        ]]>
    </fx:Script>
<s:VGroup>
    <mx:PieChart id="pieChart"
                 dataProvider="{chartDP}"
                 itemClick="pieChart_itemClick(event);"
                 showDataTips="false"
                 height="300"
                 width="300">
        <mx:series>
            <mx:PieSeries id="pieSeries"
                          field="percent">
            </mx:PieSeries>
        </mx:series>
    </mx:PieChart>
    <s:TextArea id="myTextArea" y="82" width="350" height="250" />
</s:VGroup>
</s:Application>

How to display pie chart in smart forms

Similar Messages

Maybe you are looking for