How to display Plant wise Trail Balance
Dear SAP Experts,
Can you let me have the T-code to review Plant wise Trail Balance?
Best Regards...
Hi,
Thanks for your support experts. Business area is a good option because it will display both B/S and PnL items. Profit Center will only show PnL Items.
We have not implemented business areas although the company is still running. Once it is configured, I will make it as a required entry so that all accounting documents will require this field to complete the process. Then it will show the complete balances of the business areas in the Trial Balance. Any data entered before this configuration will not be useful isn't it?
Please correct me if I am wrong.
One more thing, should I configure it after the year end (V6) or from now on?
Thank you once again for your support experts...
Similar Messages
-
How to get plant wise Vendor Balance
Dear All ,
Kindly tel me How to Get Vendor Balance at Plant level.
Regards
GirishHi Girish,
we can give the customer balance through Plant wise in standard SAP
But vendor balance not possible in plant wise.
For that you can do customise userexit
Regards
Surya -
Friends,
My client want to see the Plant Wise balancesheet.
Please suggest me how should i configure for this.
they want to see plant wise balancesheet like how we get in f.01.
I will assign full points to all of you.
Thank you.
Regards,
Reva Naikhiii
In most of the cases SAP facilitates reporting as Business area wise , we have to define Business areas for plant wise , then u will get reports according to Business areas .
In most of the cases Bus. Area = Plant = Profit Segment
Hope ur problem will b solved
can u tell me the confg of TB in Financial Statement Vetrsion ( OB58 ) , i tried the confg of TB but system is calculating Profit defaultly , i didn't assign any GL Acct also... is there any provision to configure TB as per Client's grouping....
help me
regards
ramki -
Hi,
My Client is asking the plant wise balance sheet.
We have only company code and we are not using business area concept and we are working on ECC 6.0.
If we implemented business area concept, is it possbile to get the plant wise trail balance.
Please guide me
AparnaHi,
Are you mapped your plant to single profit center?if so,you will create report painter report for trail balance.
if you created your plant as a segment and assinged segment to all your profit centers.then you can create customer trail balance report per segment.
hope this helps you.
Thanks,
Rau -
Report for Branch wise Trail Balance & Profitability
Hi,
I need a report for Branch wise trail balance and Profitability. Is there any standard report in FI for that or do i need to define with Report painter functionality?
Please advise
BR,
YadayyaTrial balance and profit and loss account can be drawn atleast at Profit center level or business place through F.01.
As you have mentioned branch , how have you treated branch ? are they profit centers or business area ?
Else you can very well use report painter for FAGLFLEXT and draw the details as desired . -
Hi,
There is issue with date wise trial balance in sap, period wise i am getting, but could you please let me knew the T code for Date wise trail balance is standard SAP
Thanks and Regards
SAPUSER5Manju,
Please check this link
http://scn.sap.com/docs/DOC-33486
Thanks,
Sharif -
How to create plant wise STO from multiple requisition through Me59N
How to create plant wise STO from multiple requisition through Me59N
Due to the different supply plants the system does not know which one
to use and therefore throws the error message.
The only workaround would be to create the PO's seperatly per PR item.
Hoep this helps you -
Default profit centers Plant wise for Balance Sheet tax relevant Items.
Dear All,
We have an issue in profit center acccounting.
In balance sheet accounts, Vat input tax payable, TDS payable, Cenvat clearing etc are picking profit center from 3KEH. When Exicse is getting captured cenvat clearing account having the profit center but while doing the MIRO cenvat clearing do not have profit center & plant.
Why it is so?
Basically we are doing the following steps.
1. Purchase order creation ME21N.
2.Goods received via migo
3. invoice receipt via miro.
At the time of miro posting, system creates automatically accounting document, with default profit center maintained in 3KEH, which are assigned to Vat input tax payable, TDS payable, other tax accounts. For GR/IR clearing account right profit center is picking without any mistake, while doing MIGO & MIRO.
We need to extract the Balance Sheet profit center wise at plant level.
Derivation rule is created for this balance sheet account along with Valuation area condition to post to correct profit center maintained under Tcode: 3KEI . But system is taking only default profit center (3KEH).
I have checked configuration and the following areas like Material master costing view, tax code areas, and account group but did not find any mistake.
Please advice and Guide us, how to get correct profit center at plant level for these balance sheet accounts instead of default. (I want to make default profit centers plant wise).
It is urgent.
Thanks,
Shailendra Gupta.Hi!
You can use following report :
S_ALR_87013336 (Report for Balance sheet at Profit Center and Group Level).
Hope this will help.
Thanks & Regards,
Taral Patel -
How to get Inventory -Finished Goods Values Plant wise in Balance Sheet
Hi,
1. Customer is using same finsihed goods material for plant 1100 and plant 1900
2. But the want to see 2 differant lines in balance sheet for inventory finished product.
3. For this can i create 2 diffferant valuation classes and 2 differant GL accounts? And assign the GL Accounts in BSX - OBYC?
Kindly help me..is there anything else do i need to do?
Thanks
VimalHi,
The setting of different valuation class and different G/L accounts is fine for different plants.
Just see that your financial statment version is showing this two G/L account in the Finished goods inventory list and then you are done.
Regards,
Gaurav -
Business area wise Trail balance is not showing balance
Dear all ,
I am facing problem in f.08.
We have 5 company code ,8 Business area, We have Activated Business area wise Balance sheet in OBY6.and assigned Plant division and Valuation area .
I am activated document splitting, Here also i maintained Business area and Profit center is mandatory field.
when i saw the business area trial balance gl balance is not showing its giving error" no list generated."
Kindly suggest me what is the setting we missed.
Thanks and Advance.
Girish.Hello,
I think, you did not set "Assign Scenarios and Customer Fields to Ledgers" customizing on SPRO.
Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Ledgers -> Ledger -> Assign Scenarios and Customer Fields to Ledgers.
You must define FIN_GSBER to scenarios for ledger "0L".
Then system fills business area on table FAGLFLEXT.
But unfortunately can not correct older data.
Regards,
Burak -
How to display plant code instead plant description?
Hi,
In tx ME21N, ME22N and ME23N, how can I display the plant code instead the plant description?
Thanks in advance.Hi,
Click the personal setting push button. There click the display key check box. Then try.
Regards, -
How to get plant wise distribution channels
My requirement as follows.
i want to get the materials combination of plant and distribution channels..
how to mix the plant and distribution channel..
is there any code for that...SELECT a~matnr
a~werks
b~vkorg
b~vtweg
FROM marc AS a INNER JOIN
mkve AS b ON a~matnr = b~matnr
INTO TABLE itab WHERE a~matnr IN s_matnr
AND a~werks IN s_werks.
Please reward if useful. -
How to display week wise data in ssrs report
Hi,
I want my report to fetch data from Financial year starting to till date.
i.e Apr 2013 to till date.
till date means Today() minus 8 days and @Fromdate includes last week of march also
i.e Mar 29 2013 to Apr 4 2013 - this week data will also be included
So data from Mar 29 2013 - Apr 4 2013 to today() minus 8 days need to be displayed
How to fetch data for this.
Pls advise.The column corresponding to this looks like "2013-11-01 ~~ 2013 - 11- 07"Hi, Well your requirement is very vague. I would probably have you create a calendar table according to your requirements and use it in your dataset. If you could better explain this with an example we could help you a lot better.
Hope this helps.......
Ione -
Dear friends,
I am displaying my reprot in ALV GRID display but as per new requirement my client want that it should be dealer wise means the dealer should come on top of page and its customer data below that heading after all customers the totle should come and when dealer change it should appear on the new page.
Can any body tell me hw to do this.
Thanking you all in advance,
NavinHI
navin this code might help u this code triggers a pge break at every new date
*& Report Y_TOP_PAGE *
REPORT y_top_page .
TABLES : mara.
TYPE-POOLS: slis.
DATA : w_repid LIKE sy-repid.
w_repid = sy-repid.
DATA : BEGIN OF it_mara OCCURS 0,
matnr LIKE mara-matnr,
END OF it_mara.
*layout
DATA: wa_layout TYPE SLIS_LAYOUT_ALV.
*field catalog
DATA: it_fieldcat_wrt_off TYPE slis_t_fieldcat_alv,
wa_fieldcat_wrt_off TYPE slis_fieldcat_alv.
START-OF-SELECTION.
SELECT matnr FROM mara INTO CORRESPONDING FIELDS OF TABLE it_mara.
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = w_repid
I_INTERNAL_TABNAME = 'IT_MARA'
i_structure_name = 'IT_MARA'
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = w_repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = it_fieldcat_wrt_off[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = w_repid
i_callback_top_of_page = 'TOP-OF-PAGE'
is_layout = wa_layout
it_fieldcat = it_fieldcat_wrt_off
TABLES
t_outtab = it_mara
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Form TOP-OF-PAGE *
ALV Report Header *
FORM top-of-page.
*ALV Header declarations
DATA: t_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
ld_lines TYPE i,
ld_linesc(10) TYPE c.
Title
wa_header-typ = 'H'.
wa_header-info = 'CHANDU REPORT'.
APPEND wa_header TO t_header.
CLEAR wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
APPEND wa_header TO t_header.
CLEAR: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
ENDFORM. "top-of-page
if it is helpfull plzz reward
dont forget to reward if ti is usefull
for any further quiries contact me on [email protected] -
How to display page wise totals in Smartforms
hi,
I created Tax Invoice for SD my quetion is i have 10 items 5 items are displaying in first page and rest of 5 items are displaying next page.
in first page 5 items i have to display the total amount in first page and same like second page also please help me.
regardsHi,
Create two global data variables called pag_total & currentpage and initialize currentpage as 1.
if currentpage <> sfsy-page.
pag_total = 0.
pag_total = pag_total + column value(which values u want to add).
currentpage = sfsy-page.
else.
pag_total = pag_total + column value(which values u want to add).
endif.
Write these lines in main area table row of that particular column cell and store the SFSY-page value also in a global variable(currentpage).
Then write the pag_total variable in the footer.
Thanks,
Venkat
Maybe you are looking for
-
Hey everyone! I just got my new retina display Macbook Pro, and I'm trying to figure out the best way to transfer all my music/photos/files/data/etc. from my old Mackbook Pro. I have a 1TB external drive and an 8GB flash drive that I can use if I nee
-
Iphone 6 emoticons showing up as question marks
My iphone 6 is not showing emoticons in text messages, they are coming up as question marks. The messages are coming from an IPhone 4s to my 6, the IPhone 4s did the update for IOS and that has still not remedied the issue. I should also note that
-
How to create files into a NT authentication folder
Hi all, I know how to create txt files on a local computer. But is it possible to create files into a NT shared folder on server machine which is user/password protected? thanks,
-
My laptop pc got stolen, how can I get hold of all the itune music I purchased, or at least get a list for insurance?
-
Hi Guys, I have generated the webservice from the ID and saved the file as wsdl. where can i find the url for this webservice which i can use to send the request from webdynpro application Thanks, srini