How to display the Buyer's signature in PO BI Publisher Report

Hi,
How to display the Buyer's signature dynamically in XMLP Purchase Order Report.
Please anybody help on this.Your help greatly appriciated.

Hi All once again
I was able to display the signature on XMLP AP Check Print Report by went through the follwoing Tim's blog http://blogs.oracle.com/xmlpublisher/2006/04/13#a12
But in Purchase Order report requirement is different. We need to display the Buyer's signature on XMLP PO Report. So, where is the best place to store the buyers signatures.(For example if we have 10 buyers with 10 signatures respectively then after approving the PO, we should display that particular buyer's signature in PO XML Publisher report).We observed that in byuers & User's form there is no attachment feature enabled.
This is an urgent requiremnt. Please help/guide/suggest to resolve this issue.
Thanks in advance.

Similar Messages

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to display the editable fields in output of an ALV report?

Hi all,
I have a requirement of displaying values in ALV Grid format and above this grid display i have to put some fields , that are editable.
I know making ALV grid fields as editable, but here requirement is to display some fields before displaying the ALV grid dispaly and to enable these fields editable to user and when printing this the values entered by user also has tobe printed.
Please help me on solving this problem? Is it possible to do this with ALV function modules?
Thanks,
Vamshi.

Hi all,
Thanks for your replies.
But this is not my requirement. I mentioned in my question that i too know how to edit the fields in ALV grid report.
Here my requirement is .
name :_____________
amount:____________
alv grid display
Like above i need to display. after name the user can be enter value and after amount also the user can be enter some value at output . But this is not the header of ALV .
Is this possible in classical ALV or Classical report? If not please specify alternative?
Thanks,
Vamshi.

How to display the number of line items in sap-script report?

Hi friends,
I need a help regarding the SAP Script. In my script (report) I create two pages and created three windows (MAIN, HEADER, FOOTER) for each pages. Now the problem is while displaying the fewer line item which can come under the main window of the 1st page these line items are comming perfectly but for the remaining line items that comes on the second page the table headings and the boexs are not comming.
Also it is displaying the total and the amount in text in every pages that should be display in last page.
Here if I eleminate or comments the total and the amount in text for the first page the same is reflected in second page. Also I need to display the page-nor for each pages to displayed.
I am requesting all the people out there kindly help me to solve this issues.
Thanks and Regards

There is no pre built solution for this. But we can show total pages in the report body.
one way is Create a other column in the report with code sum(count(1))/25. that gives you total number of pages. 25 here is no of rows in each page. The code you can write in narrative "Total pages in the report are @5" and out put may be "Total Pages in the report are 30".
If you are using pivot tables, you can try this.
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/
- Madan

How to show the Dashboard Filter Promts in a BI Publisher report?

Hi,
I have a problem when trying to pass Dashboard Prompt Filters from OBI Analysis to a Publisher Report?
Im working in OBIEE 11g. Where I simply can integrate the BI publisher to show the same result set as shown in the Analysis (Answers) Report.
I have also created dummy tables in my Analysis Report that shows the presentation variables from the prompts and I have also one dummy table that shows a session variable with a String when the DW was updated.
I use these dummy tables to be able to pass the promt values to BI Publisher.
The problem I have is that...
I can see that the Strings I have Prompted in my Analysis Report, but only the default values are shown in my BIP report.
-It works fine with my session variable that I display as a string in a dummy table as well as in the BIP report.
-Is there any other way to show the prompted Filters as information in a BI Publisher report??????
Thanks,
Ken

Is there a reason why you don't use the presentation variables directly to filter the BI publisher report?
If you use the presentation variables, then ensure that the presentation variables associated with the prompt exactly matches the BIP report parameter name. In this case, you can create another datamodel with a sql that selects the parameters. for example: select :param1, :param2 from dual. In that case, the xml will include the parameter values and you should be just able to insert the param fields in the template.
Thanks!

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to display the results in order by based on search value

Hi All,
how to display the results in the below order.
CREATE TABLE TEST( SONGID NUMBER, TITLE   VARCHAR2(200))
INSERT INTO TEST(SONGID,TITLE) VALUES (10,'AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (11,'CICCONE, MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (12,'DALLIN, MADONNA LOUISE/STOCK');
INSERT INTO TEST(SONGID,TITLE) VALUES (13,'MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (14,'MADONNA (A)/ AHMADZAI, MIRWAIS (C)');
INSERT INTO TEST(SONGID,TITLE) VALUES (15,'MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (16,'MIRWAIS AHMADZAI, MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (17,'MIRWAIS (CA)/ MADONNA (CA),AHMADZAI');
INSERT INTO TEST(SONGID,TITLE) VALUES (18,'MADONNA (CA),CICCONE');
SELECT *FROM TEST WHERE INSTR (TITLE, 'MADONNA') > 0
output:
SONGID     TITLE
10     AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)
11     CICCONE, MADONNA (CA)
12     DALLIN, MADONNA LOUISE/STOCK
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
16     MIRWAIS AHMADZAI, MADONNA
17     MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
18     MADONNA (CA),CICCONE
Expected output :
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
18     MADONNA (CA),CICCONE
...if user searches with 'MADONNA' , I have to display the results like title starts with 'MADONNA' first then rest of the records.
Please let me know is it possible to display the results in that order.
Regards,
Rajasekhar

This may be a bit more accurate:
SQL> SELECT *
2 FROM   TEST
3 WHERE INSTR (TITLE, 'MADONNA') > 0
4 ORDER BY INSTR (TITLE, 'MADONNA')
5           ,TITLE
6 ;
              SONGID TITLE
                  13 MADONNA
                  14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
                  15 MADONNA (CA)
                  18 MADONNA (CA),CICCONE
                  12 DALLIN, MADONNA LOUISE/STOCK
                  11 CICCONE, MADONNA (CA)
                  17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
                  16 MIRWAIS AHMADZAI, MADONNA
                  10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)

How to display the fields in ALV Output without using Field catalog?

How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.

Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_grid_title            = 'REPORTING'
            is_layout              = gt_layout
            it_fieldcat             = lt_fieldcat[]
       tables
            t_outtab                = itab.

How to display the proxy settings for a specific group of servers in an OU ?

Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */

Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010]

How to display the text as a Bold in the Text Element of a Smart Form

Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.

Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
        (This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
           Give the name of paragraph format in the editor.
            P1         &WA_KNA1-KUNNR&
    If it is CHARACTER FORMAT,
                         <C1> &WA_KNA1-KUNNR&
Thanks,
Nithya.

How to display the time 00:00:00 as blank?

Dear Friends,
I have created a new field GDF_9000_CREATED_AT in the normal screen (dynpro), the format is TIMS, however, when there is no value for it, is always display like "00:00:00" on the screen.
So how to display the time 00:00:00 as blank in the normal screen (dynpro) when there is no value for it?
Thanks a lot!!

In screen PBO module:
        LOOP AT SCREEN.
          if screen-name EQ 'my_time' AND my_time EQ time_zero.
            screen-invisible = 'X'.
            screen-active = 0.
            MODIFY SCREEN.
          endif.
        ENDLOOP.
I don't try this, but i think is true...
Edited by: Marco Modenese on May 7, 2009 10:36 AM
Edited by: Marco Modenese on May 7, 2009 10:36 AM

How to display the name of my metric in a PivotTable.

Hi I am working with OBIEE Plus
How to display the name of my metric in a PivotTable.
Why when I add a field to the sector of the measures in a PivotTable field name disappears.
Help please
Thanks beforehand

Where are your 'measure labels' ? These show what the metric is.

How to display the Buyer's signature in PO BI Publisher Report

Similar Messages

Maybe you are looking for