How to display the max channel value on the report automatially?

Hi all,
I have 2 text boxes start and target ready on my report. I need one of my channel minimum value and the other channels max value to dispaly automatically in start and target box respectively.
How do i go about it?
Rsh
Solved!
Go to Solution.

Hello Jason,
There is an easy way to do this, and there is a more involved way to do this. I am hoping the "easy" way will solve your question, so I don't have to think about the solution that involves a little more effort:
Starting with DIAdem 2010 there is a way to add properties to the legend (see image below) of any axis system. What I did for this example was to simply add the legend for the 2D graph (that's a simple check box in the "Curve and Axis definition" dialog, and then dragged the maximum value of any channel onto the legend. It will automatically add a new column to the legend table and display the maximum (or any other channel property) in the legend. This of course works separately for each axis system on a page.
Starting with DIAdem 2011 there is a new "Curve Snippet" function that allows to create tables such as the one shown in the image below. Please have a look at the DIAdem 2011 example called "2D Tables as Legend and Legend for Axis System Labeling" to see how this was done, it's a little more effort, but it also adds extra flexibility:
Do either of these look like a workable solution for you?
Best regards,
     Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

  • How to display Currency Unit beside value in BEx Report?

    Hi,
    I have 2 separate Amounts in the columns area. Their respective currencies exist as Characteristics in Unit dimension. How do I display the amount along with currency unit beside it?
    As of now my Report looks like....
    Amount 1              Amount 2
    2000                     3000
    I would like to display it as......
    Amount1           CUR                Amount2          CUR
    2000                 EUR                 3000               USD
    Thanks,
    SD
    Edited by: Sebastian D'Souza on Jan 16, 2009 11:40 AM

    Hi Sebastian,
    Yes it can be possible to get the currency unit along with currency in ur report.
    To do this, first of all u need to have the currency unit in ur flat file or else in ur data.
    If u have so, here are the steps to do that.
    1.Double click ur amount info object under 'currency/unit of measure tab' , in the unit/currency field just give as 0currency.
    2.And then activate ur info object.
    3.In Transformations u will find another field '0currency', just map it to the amount field.
    and then do the process as usally loading data to target, and the execute the report.
    u will be able to see currency unit filed also.
    hope this helps u.
    Thanks,
    Sai Chand.

  • How to Display the Report Based on The Page Number

    Hi All,
    I just have a requirement like this
    The User wants to see only the odd numbers of Report pages in the Total Report
    For Ex. If the Report consist of 10 Pages the user wanna see Pages 1,3,5,7,9...........
    is it attainable in WebI..............
    Please help on this
    Thanks in advance.............

    I wonder...how do you think user should navigate through document.... ? If I want to see only odd pages - I will either create separate report or I am ok with setting the correct number to actual displayed page.You may also consider using links - it depends how is report structure created...

  • How to display the report output from a standard Oracle Form

    Dear Members,
    I am calling a concurrent program (XML Report) from a standard form using form's personalization (special menu entry).
    I am able to successfully submit the concurrent program. Once it is submitted successfully user need to navigate to the Requests window to see the output.
    Instead of user navigating to the requests window to see the output, can we display it directly on the standard form itself after the completion of the report?
    Many thanks in advance.
    Best Regards,
    Arun Reddy.

    R4S,
    You might be able to Zoom to the view requests form to save your users a step.
    HTH,
    --Johnnie                                                                                                                                                                                                               

  • How to display the report output from a customized Oracle Form button

    Hi Gurus
    I developed a customized oracle form and one customized report. I want to run report from oracle customized form, for this i use one button to submit concurrent request for request.
    its successfully submitted and i can view output by using View ----> Request --------> Find -------------> Output...
    But problem is that how can i view output by using button not doing all steps to view output.
    Regards,

    Hi Haq Nawaz,
    Refer Here
    Regrads,
    Guru

  • How to display the sort value in the selection screen in the report title

    Dear All,
    How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
    Good day,
    Thanks and regards
    Arun S

    Hi Arun,
    Try this.
    1, Set one dynamic parameter,
    2, Drag and drop that parameter into  your report title.
    3, Pass the value(sort value) dynamically from your application,
    4, Cheers..
    Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then  set the data source from CR designer. and darg and drop that data column into the report.
    Hope this will work,
    Regards,
    Salah
    Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

  • How to display the results in order by based on search value

    Hi All,
    how to display the results in the below order.
    CREATE TABLE TEST( SONGID  NUMBER, TITLE   VARCHAR2(200))
    INSERT INTO TEST(SONGID,TITLE) VALUES (10,'AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)');
    INSERT INTO TEST(SONGID,TITLE) VALUES (11,'CICCONE, MADONNA (CA)');
    INSERT INTO TEST(SONGID,TITLE) VALUES (12,'DALLIN, MADONNA LOUISE/STOCK');
    INSERT INTO TEST(SONGID,TITLE) VALUES (13,'MADONNA');
    INSERT INTO TEST(SONGID,TITLE) VALUES (14,'MADONNA (A)/ AHMADZAI, MIRWAIS (C)');
    INSERT INTO TEST(SONGID,TITLE) VALUES (15,'MADONNA (CA)');
    INSERT INTO TEST(SONGID,TITLE) VALUES (16,'MIRWAIS AHMADZAI, MADONNA');     
    INSERT INTO TEST(SONGID,TITLE) VALUES (17,'MIRWAIS (CA)/ MADONNA (CA),AHMADZAI');
    INSERT INTO TEST(SONGID,TITLE) VALUES (18,'MADONNA (CA),CICCONE');
    SELECT *FROM  TEST WHERE INSTR (TITLE, 'MADONNA') > 0
    output:
    SONGID     TITLE
    10     AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)
    11     CICCONE, MADONNA (CA)
    12     DALLIN, MADONNA LOUISE/STOCK
    13     MADONNA
    14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
    15     MADONNA (CA)
    16     MIRWAIS AHMADZAI, MADONNA
    17     MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
    18     MADONNA (CA),CICCONE
    Expected output :
    13     MADONNA
    14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
    15     MADONNA (CA)
    18     MADONNA (CA),CICCONE
    ...if user searches with 'MADONNA' , I have to display the results like title starts with 'MADONNA' first then rest of the records.
    Please let me know is it possible to display the results in that order.
    Regards,
    Rajasekhar

    This may be a bit more accurate:
    SQL> SELECT *
      2  FROM   TEST
      3  WHERE  INSTR (TITLE, 'MADONNA') > 0
      4  ORDER  BY INSTR (TITLE, 'MADONNA')
      5           ,TITLE
      6  ;
                  SONGID TITLE
                      13 MADONNA
                      14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
                      15 MADONNA (CA)
                      18 MADONNA (CA),CICCONE
                      12 DALLIN, MADONNA LOUISE/STOCK
                      11 CICCONE, MADONNA (CA)
                      17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
                      16 MIRWAIS AHMADZAI, MADONNA
                      10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)

  • How to display the value of a column in a chart at the top of each column

    How to display the value of each column in a chart at the top of each column?

    Like this?
    Done using chart Inspector.
    For details, see Chapter 7,  Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
    Regards,
    Barry

  • How to display the current date in the prompt value.

    Hi,
    How to display the current date in the prompt value. When the user runs the query he want the current date to be displayed in the prompt value and he should also be able to change the date if required ...... I am using web Intellegency BO XI3.0.
    Thanks,
    Shakthi.

    Please refer the below link.
    Prompt  with  default  date   (  currentdate-1  and current date-8)
    http://www.dagira.com/2008/07/15/how-can-i-make-today-my-default-prompt-value/
    http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/
    Regards,
    Bilahari

  • How to display the contents of the database values which are retrived.

    how to display the contents of the database values which are retrived in servlets and i am able to display the contents in the servlets and if forward to jsp using requestdespatcher,the values are to be shown in jsp one below the other.please suggest me in these........the servlet code is as shown
    while(rs.next()){
                        buffer.append(rs.getString(1));
                        buffer.append(rs.getString(2));
                        buffer.append(rs.getString(3));
                        buffer.append(rs.getString(4));
                        buffer.append(rs.getString(5));
                        buffer.append(rs.getString(6));
                        buffer.append(rs.getString(7));
                        buffer.append(rs.getString(8));
                        buffer.append(rs.getString(9));
                        buffer.append(rs.getString(10));
                        request.setAttribute("result1",buffer);
                        RequestDispatcher rq=request.getRequestDispatcher("/results.jsp");
                        rq.forward(request,response);
    in jsp iam using the getAttribute to retrieve the values as shown
    <% StringBuffer sb=(StringBuffer)request.getAttribute("result1"); %>
    <%= sb %>
    but getting the results in the stretch,i need to display the result one below the other.

    if you load it all into the buffer that is going to be very difficult. I would suggest loading it into some sort of collection. I like using an ArrayList.
    Then pass the arraylist.
    you will then on the jsp iterate through the arrayList using what every you want.. el, logic tags, scriplets.
    so something like
    ArrayList arrayList = new ArrayList();
    while(rs.next()){
    arrayList.append(rs.getString(1));
    //or possibly an arrayList of String arrays
    //maybe using nested for loops.  Inner for loop adds result to string[] then //outer adds string[] to arrayList.
    //can be done any number of ways based on your expected result set.

  • How to display the message along with a value using BBP_CHECK_BADI

    Hi Gurus,
    I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
    Thanks,
    Neelima

    Hi,
    you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
    See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

  • How to format the report with the aggregated value

    Hi,
    I have 2 characteristics and 3 KFs in the infocube.
    First field is Cost Center
    Second field is creation Date
    3rd field is KF1
    4th field is KF2
    5th field is KF3
    I have put the date field( in the row) as this is required for calculating formula for KFs. But I have set that as No display.
    The date in the info cube is as follows.
    Cost Ceneter  Date( no Display)   KF1     KF2      KF3
    CC1           01/01/2006          100     150      200
    CC1           02/02/2006          75      100      95
    CC1           05/02/2006          125      95      125
    CC2           01/02/2006          75       25      85
    CC2           02/02/2006          85       65      10
    As the Date field is in query set to No display so the date appearing in the report is as follows
    CC1       100        150        200
              75         100        95
              125          95        125
    CC2       75           25        85
              85           65        10
    But I want the aggregated value at cost senter level i.e.
    CC1       300         245       420
    CC2       160         90         95
    I can not remove the Date frield from query as there is a formula variable defined on the date field.
    Please let me know how to bring the report to the required format.
    Bill
    Message was edited by:
            Bill Bryan

    If you are in new Bex, you can do it.
    You will have to create another (set of) CKF on top of the current ones (which do exception aggregation on DOCNUM) and set the exception aggregation on date.
    Say you have
    CH1--CH2CH3--CKF1
    To have a 'before aggregation' behavior for CKF1 when CH3 is not present, you will create a CKF2 = CKF1 with exception aggregation on CH3.
    Now, if you want to remove CH2 and have the 'before aggregation' behavior you will need to create another CKF3 = CKF2 with exception aggregation on CH2.
    ie for each level of aggregation, you will have to define a new CKF/Formula with corresponding exception aggregation - this is what will be needed to get you your output.
    Message was edited by:
            Ajay Das

  • How to display the proxy settings for a specific group of servers in an OU ?

    Hi,
    Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
    $Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
    ForEach ($Computer in $Computers) {
    | Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
    I've done similar script for some other task but not sure how to do this for Proxy setting.
    Thanks.
    /* Server Support Specialist */

    Proxy settings are not set in Active Directory
    The below code works for 2003 servers and Win XP
    $colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
    -computername $env:computername
    foreach ($objItem in $colItems) {
    write-host "Caption: " $objItem.Caption
    write-host "Description: " $objItem.Description
    write-host "Proxy Port Number: " $objItem.ProxyPortNumber
    write-host "Proxy Server: " $objItem.ProxyServer
    write-host "Server Name: " $objItem.ServerName
    write-host "Setting ID: " $objItem.SettingID
    write-host
    You can try checking the registry values- Works in 2008 + and Windows 7
    Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
    or use netsh
    netsh winhttp show proxy -r <remotemachinename>
    Regards Chen V [MCTS SharePoint 2010]

  • How to display the time 00:00:00 as blank?

    Dear Friends,
    I have created a new field GDF_9000_CREATED_AT in the normal screen (dynpro), the format is TIMS, however, when there is no value for it, is always display like "00:00:00" on the screen.
    So how to display the time 00:00:00 as blank in the normal screen (dynpro) when there is no value for it?
    Thanks a lot!!

    In screen PBO module:
            LOOP AT SCREEN.
              if screen-name EQ 'my_time' AND my_time EQ time_zero.
                screen-invisible = 'X'.
                screen-active = 0.
                MODIFY SCREEN.
              endif.
            ENDLOOP.
    I don't try this, but i think is true...
    Edited by: Marco Modenese on May 7, 2009 10:36 AM
    Edited by: Marco Modenese on May 7, 2009 10:36 AM

  • How to display the time length of video (current time/ total time) ?

    Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
    It there any information or solution to solve it? .
    I appreciate it any of you able to answer it. ^^
    Thank you.

    Hi,
    Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
    Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
         at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
         at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
         at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
         at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
    AudioFormat audioFormat = new AudioFormat(
              AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
                                                            // technique
              48000.0F,// sampleRate the number of samples per second
              16, // sampleSizeInBits the number of bits in each sample
              2, // channels the number of channels (1 for mono, 2 for
                            // stereo, and so on)
              4, // frameSize the number of bytes in each frame
              48000.0F,// frameRate the number of frames per second
              false); // bigEndian indicates whether the data for a single
                            // sample is stored in big-endian byte order
                            // (false means little-endian)Can you please suggest where I am going wrong ?

  • How to Display the Predefault Date Time

    Hi frnds,
    How to display the Default DateTime in the date field via sctipting i have a requirementy to show in one of the date field as next day's date with 9:00 a.m time stamp(2/15/2010 9:00 A.M) the data type of that field& column is UTC_datetime.please help i am getting.
    siebel bee

    Have a look at the function Today(), TimeStamp() and ToChar()
    You should be able todo it with something similar to this:
    Expr: "ToChar(TimeStamp(),'MM') + '/' + ToChar(TimeStamp(),'DD') + '/' + ToChar(TimeStamp(),'YYYY') + ' ' + ToChar(TimeStamp()+(1/24),'HH') + ':00:00'"
    as a pre-default value.

Maybe you are looking for