How to display the smartform of a purchase order from EBP (its) into a BSP

Hello,
I'm trying to make a bsp which lists the purchase orders (PO) for a user, that is not a problem.
But I would like to open the smartform of a PO like in EBP (SRM) into my BSP.
In EBP with the ITS i use this function :
BBP_OUTPUT_PO_PREVIEW_SMART
I give in input of this function the GUID (number) of my PO and the name of smartform to use with.
I would like to reproduce this functionality in a BSP like on the ITS.
Can someone help me ?
Thanks a lot !
Francois

Indeed with the example of the bsp sf_webform_04 i can display my smartform !
I have two choices : HTML or PDF.
You only have to choose OTF for PDF or XSF for HTML !
Thanks a lot !
Francois
Message was edited by: Francois Lavoissiere

Similar Messages

How to see the ouput of a purchase order on screen??

Hi all , how to see the output of a purchase order (ME23) on screen?
Points will be awarded!!!!
Thanks & Regards
John

Hi,
If any output tye is associated to PO and it is been triggered then User ME9F tocde to view the output.
To check thise first Use: ME23 and click on Messages, if any outputs are triggered and they are in Yellow status then Use ME9f. Once you execute you will get Outputs in the screen, then choose the output and click on Display Message button. Your output will be displayed on the screen.
Regards,
Ashok

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha

Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)?

Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)? What's this error about? I searched and couldn't find it on the support page. This is extremely annoying.

Hello, I just solved my "Error 5200" problem by following these instructions to repair the permissions of the iTunes Music Folder:
http://docs.info.apple.com/article.html?artnum=93069
I hope this helps other people!

Need the SMARTFORM name for Purchase Order in ECC 6.0

Hi experts,
I have been working on ECC 6.0 version and I need your help in finding out the name of the SMARTFORM for Purchase Order. Please let me know the SmartForm name if anybody knows. Waiting for your replies.
Regards,
Ravi

HI,
We have the Smartforms in the Service.sap.com, you need to download from this one. in our SAP we do not have these smartforms .
smartform name is /smb40/mmpo_l. Look at the SAP Note 695891
Look at the below link
Re: PURCHASE ORDER SMARTFORM IN ECC 6.0
<i>Mark all the helpful answers</i>
Regards
Sudheer

How to activate the Check box in Purchase Order after Goods Receipt

Hi All,
How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
Where t make the settings in SPRO.
Regards,
Shailendra Hadkar

Hi
SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
Then activate the auto PO creation in Vendor master - Purchasing view
Check it out.
Regards,
raman

How to see the changed output for purchase order

Hi..
I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where i am wrong.
Edited by: Meena 303 on May 1, 2008 6:24 PM

Hi
In ME22N go to message -
> select old message -
>click change OutPut button -
> Save
then see print priview through ME9F or ME22N it sself.
regards
Sachin

How to find the Invoice available for Purchase orders

Hi friends,
How to find the Invoice available for PO. Please give me the tcodes also.
Is one PO can have multiple Invoice, then what is the relation between those PO and Invoices.
Thanks,
Veerendra.

Hi,
Goto ME23N and in the line item choose the PO History tab..
There you can check if there is any invoice created for that PO..
Yes one PO can have multiple invoices...
Check the table RSEG where it has references to a PO and PO line items..
THanks,
Naren

Purchase Order from EBP was not created

Hi people,
I have a problem with an approved shopping cart that must generate a Purchase Order in R3.
But:
- The order was not generated in R3
- I have an entry in bbp_document_tab table in EBP system
- When I check the status of the Shopping Cart in transaction BBP_PD I can see the item in "Item in Transfer Process" status.
- When I check the Application Monitor in EBP system, there is no messages related to this Shopping Cart.
- The report CLEAN_REQREQ_UP is schedule to run every 25 minutes and after it runs, the entry in bbp_document_tab remains there.
- I checked the dumps in R3 system using transaction ST22 but I could not find entries (I have searched using the RFC user).
What else I can check? If I have an error when BAPI_PO_CREATE1 is called, where it is logged?
Thank you!

Hi
You need to take help of ABAP resource here.
Using the same data what you are passing in the shopping cart, directly create a purchase order both
1) using ME21N transaction directly and
2) then using 'BAPI_PO_CREATE1' bapi using a custom program in this case.
3) Incase you are using ECS, then implement BBP_CREATE_PO_BACK BADI and put a break-point there and then you can easily figure out, what's the problem happening as soon as BAPI - 'BAPI_PO_CREATE1' is called from SRM system using RFC call there.
Do let me know your findings.
Regards
- Atul

How to display the output of a reports called from forms in the same window

Hi all.
I have installed Forms / Reports 11g Rel2 developer only installation on my windows 7 box.
I can successfully call a reports from forms using RUN_REPORT_OBJECT and WEB_SHOW.document, but the report is opened in a new window.
I'd like to open it in the same widow, in a new tab, similar to ctrl-t and make a call.
How is that possible?.
I'm using Chrome 25.0. Could this be done through browser settings?.
Thanks in advance ...!
Edited by: myluism on 14-mar-2013 6:09

Don't know for Chrome, so Google for it.
One more thing, though. what is the 2nd parameter in web.show_document? Is it '_blank'? If not, try that.

How to get the Customer detials in Purchase order Ship To Address

Hi Friends,
While doing the back-to-back order, when raising the PO, I want populate the Customer Name, Contatct Person and Address in Ship To address box. Can anyone please suggest a good query which can do that. I looking to create a formatted search based pon that.
Regards
Shiva

Shiva,
You can start with this:
SELECT T0.CardName, T1.Name, T0.Address2
FROM ORDR T0 INNER JOIN OCPR T1 ON T0.CntctCode = T1.CntctCode
WHERE T0.DocEntry = $[POR1.BaseEntry] AND T0.ObjType = $[POR1.BaseType]
Please bear in mind, it is a FS based on the rows so will run only on row level.
Regards,
Nat

How to display the proxy settings for a specific group of servers in an OU ?

Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */

Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010]

Printing Purchase Order from ME9F using custom program and smartform

I was able to use my custom program which calls a smartform to print purchase orders from transaction ME9F. I did this using transaction NACE.
However, when I call "Output Message" from ME9F, the output always fails (shown by an 'X' icon after the checkbox). When I try to put back the standard program in NACE, it does not show an 'X' but a check which indicates that the printing was successful.
Do you know why this happens? What did I miss?
Here's my call to my smartform from my custom driver program:
    " Change Smartform ZP_MMSF_P01_PURCHASE_ORDER
    " to internal Function module name
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
            FORMNAME   = 'ZP_MMSF_P01_PURCHASE_ORDER'
        IMPORTING
            FM_NAME    = fmname
    wa_cparam-no_dialog = 'X'.
    wa_output-tddest = 'LOCL'. "or 'LP01'. "Spool: Output device
    CALL FUNCTION fmname
        EXPORTING
            control_parameters         = wa_cparam
            output_options             = wa_output
            i_data                     = i_data
            wa_lookup                  = wa_data_lookup
            goods_amt                  = goods_amt
            discount_amt               = discount_amt
            vat                        = vat
            total_amt                  = total_amt
            total_amt_inwords          = total_amt_inwords

Vijaya,
I have this problem though,
Whenever I try to provide values for CONTROL_PARAMETERS and OUTPUT_OPTIONS to the sapscript call in your code, the PO printing (even the preview) does not proceed. I do this because I wanted to suppress the printer dialog.
here is a fragment of the code:
" code I added
LS_COMPOSER_PARAM-tddest = 'LOCL'. "or 'LP01'. "Spool: Output device
LS_COMPOSER_PARAM-bcs_langu = sy-langu.
LS_CONTROL_PARAM-preview = 'X'.
LS_CONTROL_PARAM-no_open = 'X'.
LS_CONTROL_PARAM-no_close = 'X'.
LS_CONTROL_PARAM-device = 'PRINTER'.
LS_CONTROL_PARAM-no_dialog = 'X'.
DO NAST_ANZAL TIMES.
*--In case of repetition only one time archiving
* if sy-index > 1 and nast-tdarmod = 3.
* nast_tdarmod = nast-tdarmod.
* nast-tdarmod = 1.
* ls_composer_param-tdarmod = 1.
* endif.
IF SY-INDEX NE 1 AND REPEAT IS INITIAL.
REPEAT = 'X'.
ENDIF.
CALL FUNCTION LF_FM_NAME
EXPORTING
ARCHIVE_INDEX = TOA_DARA
ARCHIVE_PARAMETERS = ARC_PARAMS
CONTROL_PARAMETERS = LS_CONTROL_PARAM
MAIL_RECIPIENT = LS_RECIPIENT
MAIL_SENDER = LS_SENDER
OUTPUT_OPTIONS = LS_COMPOSER_PARAM
USER_SETTINGS = SPACE
IS_NAST = NAST
IS_REPEAT = REPEAT
I tried to trace it to the function module generated by smartform. The error propagates this way: From the function module, there is a call to function SSFCOMP_PROCESS_DOCUMENT. Then inside that function, there is a perform operation to tr_ssfcomp_process_doc
perform tr_ssfcomp_process_doc using startpage docstruc
                                       header.
Inside that form, it calls the macro tr_active which checks the value of ssfcstat-trlevel (tracelevel) against c_trlevel_document. In the macro, if ssfcstat-trlevel is less than c_trlevel_document, the smartform will fail. c_trlevel_document is 15 and ssfcstat-trlevel is 0, and so the smartform fails.
(you can see the macro tr_active in include LSTXBCMAC and the form tr_ssfcomp_process_doc is in the include LSTXBCFTR)
When I do not put values in CONTROL_PARAMETERS and OUTPUT_OPTIONS, everything is ok.
Do you know why this happens?
Thanks in advance!
Edit: I have found out about transaction SFTRACE, but this is disabled.
Kyle

How to display URL images and URL link (html) from Smartforms?

Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
         lc_true(1) VALUE 'X',
         lw_control_parameters TYPE ssfctrlop,
         lw_output_options TYPE ssfcompop,
         lc_graphics(8) VALUE 'GRAPHICS',
         lw_xsfparam_line TYPE ssfxsfp,
         lc_extract(7) VALUE 'EXTRACT',
         lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
         lc_mygraphics(11) VALUE 'mygraphics/',
         lc_content_id(10) VALUE 'CONTENT-ID',
         lc_enable(6) VALUE 'ENABLE',
         lw_job_output_info TYPE ssfcrescl,
         lw_html_data TYPE trfresult,
         lw_graphics TYPE ssf_xsf_gr,
         lt_graphics TYPE tsf_xsf_gr,
         lv_html_xstr TYPE xstring,
         lw_html_raw LIKE LINE OF lw_html_data-content,
         lv_incode TYPE tcp00-cpcodepage VALUE '4110',
         lv_html_str TYPE string,
         lv_html_len TYPE i,
         lc_utf8(5) VALUE 'utf-8',
         lc_latin1(6) VALUE 'latin1',
         lv_offset TYPE i,
         lv_length TYPE i,
         lv_diff TYPE i,
         lt_soli TYPE soli_tab,
         lw_soli TYPE soli,
         lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
         lv_name TYPE mime_text VALUE 'sapwebform.htm',
         lv_xstr TYPE xstring,
         lw_raw TYPE bapiconten,
         lt_solix TYPE solix_tab,
         lw_solix TYPE solix,
         lv_filename TYPE string,
         lv_content_id TYPE string,
         lv_content_type TYPE w3conttype,
         lv_obj_len TYPE so_obj_len,
         lv_bmp TYPE so_fileext VALUE 'BMP',
         lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
         lc_doc_bcs TYPE REF TO cl_document_bcs,
         lc_bcs TYPE REF TO cl_bcs,
         lc_send_exception TYPE REF TO cx_root,
         lw_adsmtp TYPE lty_adsmtp,
         lv_mail_address TYPE ad_smtpadr,
         lc_recipient TYPE REF TO if_recipient_bcs,
         lc_send_request TYPE REF TO cl_bcs,
         lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
         v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = v_form_name
    IMPORTING
      fm_name            = v_namef
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
    EXPORTING
      i_language    = v_language
      i_application = 'SAPDEFAULT'
    IMPORTING
      e_devtype     = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
Set output options
lw_output_options-xsf        = lc_true.
lw_output_options-xsfcmode   = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
    EXPORTING
      control_parameters   = lw_control_parameters
      output_options       = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
      job_output_info    = lw_job_output_info
TABLES
      tt_tabh              = tt_tabh
      tt_tabb              = tt_tabb
      tt_tabf              = tt_tabf
EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
    CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
    EXPORTING
      inbuff       = lv_html_xstr
      incode       = lv_incode
      csubst       = lc_true
      substc_space = lc_true
    IMPORTING
      outbuff      = lv_html_str
      outused      = lv_html_len
    EXCEPTIONS
      OTHERS       = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
   EXPORTING
     object_id = 'ZWN'
     object_url = 'ZWN.GIF'
   EXCEPTIONS
     OTHERS     = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
   break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
    lv_diff = lv_html_len - lv_offset.
    IF lv_diff > lv_length.
      lw_soli-line = lv_html_str+lv_offset(lv_length).
    ELSE.
      lw_soli-line = lv_html_str+lv_offset(lv_diff).
    ENDIF.
    APPEND lw_soli TO lt_soli.
    ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
    EXPORTING
      content     = lt_soli
      filename    = lv_name
      description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
    CLEAR lv_xstr.
    LOOP AT lw_graphics-content INTO lw_raw.
      CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
    ENDLOOP.
    lv_xstr = lv_xstr(lw_graphics-length).
    lv_offset = 0.
    lv_length = 255.
    CLEAR lt_solix[].
    WHILE lv_offset < lw_graphics-length.
      lv_diff = lw_graphics-length - lv_offset.
      IF lv_diff > lv_length.
        lw_solix-line = lv_xstr+lv_offset(lv_length).
      ELSE.
        lw_solix-line = lv_xstr+lv_offset(lv_diff).
      ENDIF.
      APPEND lw_solix TO lt_solix.
      ADD lv_length TO lv_offset.
    ENDWHILE.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
    lv_content_type = lw_graphics-httptype.
    lv_obj_len      = lw_graphics-length.
*Add images to the email
    CALL METHOD lc_mime_helper->add_binary_part
      EXPORTING
        content      = lt_solix
        filename     = lv_filename
        extension    = lv_bmp
        description = lv_description
        content_type = lv_content_type
        length       = lv_obj_len
        content_id   = lv_content_id.
ENDLOOP.
TRY.
      lv_subject = lv_subject.
      lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
               i_subject          = lv_subject
               i_multirel_service = lc_mime_helper ).
    CATCH cx_document_bcs INTO lc_send_exception.
    CATCH cx_bcom_mime INTO lc_send_exception.
    CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
      lc_bcs = cl_bcs=>create_persistent( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->set_document( i_document = lc_doc_bcs ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
      lc_recipient = cl_cam_address_bcs=>create_internet_address(
          i_address_string = lv_mail_address ).
    CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->add_recipient( i_recipient = lc_recipient ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
      lc_bcs->send( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM.                    "call_smartforms
End Code --->
Thanks and Regards.

1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

How to display the Buyer's signature in PO BI Publisher Report

Hi,
How to display the Buyer's signature dynamically in XMLP Purchase Order Report.
Please anybody help on this.Your help greatly appriciated.

Hi All once again
I was able to display the signature on XMLP AP Check Print Report by went through the follwoing Tim's blog http://blogs.oracle.com/xmlpublisher/2006/04/13#a12
But in Purchase Order report requirement is different. We need to display the Buyer's signature on XMLP PO Report. So, where is the best place to store the buyers signatures.(For example if we have 10 buyers with 10 signatures respectively then after approving the PO, we should display that particular buyer's signature in PO XML Publisher report).We observed that in byuers & User's form there is no attachment feature enabled.
This is an urgent requiremnt. Please help/guide/suggest to resolve this issue.
Thanks in advance.

How to display the smartform of a purchase order from EBP (its) into a BSP

Similar Messages

Maybe you are looking for