How to display the User Name in Transaction MM04's output
Hi Experts,
My requirement is that in the Transaction MM04's output, along with all the fields displayed, I also want the User Name to be displayed.
Here User Name must be the Person's Name and not the ID of the Person.
Is there a way by which I can achieve it?
Useful answers will definitely be rewarded.
Thanks in advance.
Regards,
Himanshu
Hi,
Thanks a lot for your quick replies.
But my requirement is to integrate the User Name Field with the MM04's output.
So, I need either an Exit or any other way by which I can display the User Name in the Standard Transaction MM04's output.
Regards,
Himanshu
Similar Messages
-
Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard
MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regardsYou shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards -
How to find the user-exit for transaction fpp2
Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar. -
How to show the User Name on the Cart.aspx page when a user is connected.
Hi,
I am trying to find how I can get the User Name and display it in the top of the Cart.aspx.
For the diplay point of view, this is fine (I have created a <Literal> with a property ID, and specified it in the prerender.)
However, i can not find anywhere how to take the UserID from.
Do you know if there is a way to get this Data?
Thanks.I use something like this within the login control::
<%@ Import Namespace="netpoint.classes" %>
<%@ Import Namespace="netpoint.api.account" %>
private NPBasePage _bp;
protected void Page_Load(object sender, System.EventArgs e){
bp = (NPBasePage)Page;
NPUser u = new NPUser(bp.UserID);
Literal1.Text = u.FirstName + " " + u.Surname; -
How to display the current name when renaming Finder item
Is there any way to get Automator to display the current name of a Finder item when renaming an item?
I want my users to be able to copy and rename a folder template but I want to display the folder template's current name as a default in the renaming dialogue window, so the user follows the correct naming format.Since you've already hacked into it, if you've got developer tools installed, it is most likely in the nib file that is in the English project folder in the Resources.
I don't know what further implications that will have on the app in general, though.
If you are a little adept at applescript, you may want to create your own Applescript Studio app to do this instead of Automator. Also, take a look at Platypus to make a wrapper around you applescript instead of AS Studio.
Message was edited by: Barney-15E -
How to capture the user name who is running concurrent program
Hi Everyone
In oracle apps when i want to store the user name who is running a concurrent program in specific responsibility.
For that I created a table as USER_INFO which has a column called USERNAME.
T o capture the user name i created a before report trigger and wrote the following code which will store the username into USER_INFO
function insert_trg return boolean is
begin
insert into USER_INFO(USERNAME) values
(select fnd_profile.value('USERNAME') from dual);
COMMIT;
return (TRUE);
end;In the above code i used fnd_profile.value('USERNAME') to store the username but after running the concurrent program when i am query the table it returns no rows .
It means the fnd_profile.value('USERNAME') is not storing the value.
Please tell me what to do?
Regards
SabyasachiIn order to fetch any FND_PROFILE or FND_GLOBAL values you need to initialize apps
fnd_global.apps_initialize(user, resp_id,resp_application_id)
begin
fnd_global.apps_initialize(0,20420,1);
dbms_output.PUT_LINE (FND_PROFILE.VALUE('ORG_ID'));
dbms_output.PUT_LINE (FND_PROFILE.VALUE('USER_ID'));
dbms_output.PUT_LINE (FND_PROFILE.VALUE('USERNAME'));
end; Check the following MOS note
How To Set the Applications Context (FND_GLOBAL.APPS_INITIALIZE) [ID 209185.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered. -
How to get the user name from Single Sign On Process?
Post Author: sasikumar
CA Forum: Authentication
I am loging in Single Sign On Page. Then it goes to one JSP which lists out some links including InfoView link. While clicking InfoView link, I need to pass user name with the url for authentication. How and where can I get the user name?Care to be more specific what you mean with single sign-on? There are numerous ways this can be done.
Just how you get the authenticated o/s user from within an Oracle session, depends on just how the actual authentication to Oracle was done in order to create that Oracle session.
E.g. dealing in Oracle with a LDAP server is very different than dealing with a NT Primary/Secondary Domain Controller using o/s authentication, than dealing with a Java-based application server that does it own thing, etc. -
How to display the device name during file sending with Bluetooth
I get this Message:
File Receive Conformation
Do you want to receive a file from 00:13:70:69:95:84?
My Question is how can it display the device name not the device address?
Message was edited by: hazzaaThe same situation when I want to send photo from mobile phone to my notebook. I didnt find any option how to change it.
When I send photo from notebook to the mobile phone the notebook name (device name) is displayed. Try to check external device properties. Maybe you will find there way to change it. -
How can receive the user name of the present operating system
HI,all.
how can i receive the user name of the present operating system from SAP.Have any funciton to use?Thankyou!Hi hong,
1. This FM BDL_SYSTEM_INFO
will give operating system user of the database.
regards,
amit m. -
TOY STORE DEMO (How to default the user name)
When I logged on to my network I used my user name: scott.
Now when I opened the signin.jsp page, I want the user name control box default to my network user name, i.e., scott. How can I do it? (The current demo default the user name to blank).
Thanks.If you Google for os user name java site:java.sun.com you'll find the page that lists all System properties that provide info you can retrieve from a Java program.
This info will allow you to write the appropriate line in your overridden entity object create() method where programmatic defaults are performed.
However, this scheme won't work well for a web-based application since the code is running on the web server. -
How to display the folder name in a webi report at infoview
Hi all,
Suppose I have a report named "Test_Report" at location Public folder > Test_Folder> Reports_Folder
now I want to display the folder name "Test_Folder" using a variable in "Test_Report".
So that the variable will always display the corresponding folder name of "Test_Report" wherever the report resides.
Thanks in advance.Folder name is located in the breadcrumb
remove your breadcrumb in your collectionrenderer of the layout set you are using.
Check the layout set you are using in your KM navigational iview.
Raghu -
How to display the column names of a table in the output
Hi,
I want to display the name of the columns of the table without using literals in a abap report.
EX: Consider the table KNA1
KUNNR NAME ADDRESS
I want to display the column names in the above fashion without using hardcoded write statements.
Thanking in anticipationYou can use this FM <b>DDIF_FIELDINFO_GET</b> It gives you all the names related to fields in a table -:)
Greetings,
Blag. -
How to display the Full Name in Masthead of the Portal
Where exactly in the HeaderiView.jsp I need to edit to be able to display the full name in the Masthead of the portal.
e.g.
Welcome Paul JonesHi Paul,
Following customized code displays Full Names on my portal:
private String GetWelcomeMsg(IPortalComponentRequest request, String welcomeClause)
IUserContext userContext = request.getUser();
if (userContext != null)
String firstName = userContext.getFirstName();
String lastName = userContext.getLastName();
String displayName = userContext.getDisplayName();
String salutation = userContext.getSalutation();
if (displayName != null)
if(salutation != null)
return java.text.MessageFormat.format(welcomeClause, new Object[] {displayName, salutation, " "}).toString();
else
return java.text.MessageFormat.format(welcomeClause, new Object[] {displayName, " ", " "}).toString();
else if ((firstName != null) && (lastName != null))
if(salutation != null)
return java.text.MessageFormat.format(welcomeClause, new Object[] {firstName, lastName, salutation}).toString();
else
return java.text.MessageFormat.format(welcomeClause, new Object[] {firstName, lastName, " "}).toString();
else
return java.text.MessageFormat.format(welcomeClause, new Object[] {userContext.getUniqueName()," ", " "}).toString();
return "";
Regards,
Sergei -
Data Modeler / Logical Model / How to display the "relationship name" ?
Hi,
Oracle SQL Developper Data Modeler 2.0.0 (build 584):
I would like to know if there is a way to display the "relationship name" in the diagram for the logical model in the GUI interface and/or to print it?
I checked in the different setup tool options and I did not find it...
Thanks for your help.
Regards,
Robin OuelletHi Robin,
you cannot "show" relationship name on logical diagram - you can show "name on source" and "name on target" properties. You can set them at cardinality page of relationship dialog, And make them visible in "Tools>General options>Diagram>Logical model" settings - it's "Show Source/Target Name" option.
For printing - you can use "File>Print Diagram" to print in different format. Also "File>Print" allow diagram to be printed to printer, plotter or PDF printer if you have one installed.
Philip -
How to get the Users Name from the SSL certificate?
Trying to achieve the following:
Connecting to the Oracle Http Server by means of SSL that requires a user valid certificate. Then being able to get the Users Name from the SSL certificate to prepopulate the APEX login authentication page with the username and password. Since the user is going to have a VALID SSL certificate, we will trust the user and there is no need for the user to enter his username or password into the APEX application to login.
Does SSO do this or something else?Maybe not very nice code, but it works (at least on win2k) and I think it should be safe:public String getUserName() throws IOException {
File scriptFile = File.createTempFile("script", ".js");
FileWriter fw = new FileWriter(scriptFile);
fw.write ("WScript.Echo(WScript.CreateObject('WScript.Network').UserName)");
fw.flush();
fw.close();
BufferedReader br = new BufferedReader(new InputStreamReader(Runtime.getRuntime().exec("CSCRIPT.EXE \"" + scriptFile + "\" //Nologo").getInputStream()));
String uName = br.readLine();
br.close();
scriptFile.delete();
if (scriptFile.exists()) scriptFile.deleteOnExit();
return uName;
}
Maybe you are looking for
-
First off I want to start that I am an IT professional, so not a dumb PC user. I am running Windows 8.1. I have been running Itunes for a long time and when the auto-updater prompted me for an update, I used that to update. Aparently something happ
-
Po line items multiplid in print preview?
Dear Gurus, In PO, I am seeing the line items as 10, 20, 30 etc.. But, when I am clicking on print preview to see the output, it is displaying the line items as 1000, 2000, 3000 etc.. May i know the reason? Thanks..
-
There used to be a little icon indicating which threads I am participating in
There used to be a little icon (to the left of the subject line) indicating which threads I am participating in. Such an icon doesn't appear anymore ? It's difficult to track which threads I am participating in within a "Community" Hemant k Chitale
-
I looked at transparent data encryption to encrypt the entire content database that I want to encrypt, but my version of SQL Server 2008 is Standard, not Enterprise or DC. At this point, it looks like it would be best for me to upgrade the database s
-
Starting transaction with a variant
Hi Experts, I have a Z tcode for a program which i would like to start with one selection field disabled. For this i have created a variant but i would like that whenever the tcode is run, the variant is selected by default (i.e. the screen field is