How to display two detail lines as one
In a report I am working on I have a detail line that displays values from two tables.
Table OR contains the date time stamp I need
Table OB contains the rest of the information I need.
(These two tables are linked by a Set_Id field.)
Table OB contains different types of data depending on the OB_Id field.
If OB_Id = 1 then OB_fldA = weight.
If OB_Id = 2 then OB_fldB = appetite_flg.
Below I have tried to type up a sample of the report. I have it grouped by the OR_DtTm.
I would like to get the report to look like there is one line that contains both the weight and the appetite_flg and eliminate any lines that have weight info and no appetite_flg to go with it (like the 3rd one down with the time of 3:45:30).
How it currently looks:
Date Weight Flg OR_DtTm
6/22/2010 64.8 6/22/2010 3:44:31PM
6/22/2010 0.0 N 6/22/2010 3:44:31PM
6/22/2010 64.0 6/22/2010 3:45:30PM
8/3/2010 64.0 8/3/2010 9:09:01AM
8/3/2010 Y 8/3/2010 9:09:01AM
How I would like for it to look:
Date Weight Flg OR_DtTm
6/22/2010 64.8 N 6/22/2010 3:44:31PM
8/3/2010 64.0 Y 8/3/2010 9:09:01AM
I hope this makes sense. Any suggestions on how to do this?
Hey Brian,
Now that I have the Maximum formulas working on my Group Footer, I need to figure out how to supress when the MaxAppetiteFlg is not there. In the Section Expert on the Group Footer I clicked the x+2 button and put this:
{@MaxAppetiteFlg} = "" or {@MaxAppetiteFlg} = " "
but it still does not suppress when nothing is in the MaxAppetiteFlg. I have tried single quotes and double quotes; I have tried checking for just null and for just space and as shown above for both. Nothing suppresses the group footer when the MaxAppetiteFlg is blank/empty. What actually goes into the formula?
Ok, let me back up a little. I don't think this makes a difference but you never know. I am going to explain the steps preceeding the creating of @MaxAppetiteFlg. It's a little more complicated than I originally indicated (I removed the complexicity to hopefully make it easier to understand my original question).
Originally I said:
If OB_Id = 2 then OB_fldB = appetite_flg
Actually it is
OB_Id = 2 is part of the filter in the Select Expert. Then I created a formula:
DecreaseAppetiteInd =
If {OB.Ob_fldB = 22474 then
'N'
Else If {OB.Ob_fldB = 22475 then
'Y' ;
Then MaxAppetiteFlg =
Maximum ({@DecreasedAppetiteInd},{Ob_DtTm})
So I don't know if that makes a difference in later checking MaxAppetiteFlg (but I didn't think it would make a difference whether I had changed the options on the group but it did).
I hope all this makes sense and I haven't muddied the water too badly.
I look forward to your response.
Similar Messages
-
How to display two different parts of one image in two windows?
hi everyone:) i need to display two different parts of one image in two windows. i have problem with displaying :/ because after creating windows there aren't any images :( i supose my initialization code of creating windows is incomplete, maybe i miss something or maybe there is some inconistency. graphics in java is not my strong position. complete code is below. can anybody help me?
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
import javax.swing.*;
import java.util.*;
class ImgFrame extends JFrame
private BufferedImage img;
ImgFrame(BufferedImage B_Img, int x, int y, int w, int h)
super("d");
img=new BufferedImage(w,h,BufferedImage.TYPE_INT_RGB);
img=B_Img.getSubimage(x, y, w, h);
}//end ImgFrame construction
public void paint(Graphics g)
Graphics2D g2D = (Graphics2D)g;
g.drawImage(img, 8, 8, null);
}//end paint method
public Dimension getPrefferedSize()
if(img==null)
return(new Dimension(100,100));
else
return(new Dimension(img.getWidth(null),img.getHeight(null)));
}//end of GetPrefferedSize method
}//end ImgFrame class
public class TestGraph2D_03 extends Component
static BufferedImage IMG;
public static void Load()
try
IMG=ImageIO.read(new File("c:/test.bmp"));
catch(IOException ioe)
System.out.println("an exception: "+ioe);
}//end try catch
}//end TestGraph2D_03 construction
public static void main(String[] args)
Load();
ImgFrame F1 = new ImgFrame(IMG, 0, 0, 8, 8);
ImgFrame F2 = new ImgFrame(IMG, 8, 8, 8, 8);
F1.addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
F1.pack();
F1.setVisible(true);
F2.addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
F2.pack();
F2.setVisible(true);
}//end of main method in TestGraph2D_01 class
}//end of TestGraph2D_03 classNever override the paint(...) method of a Swing component.
If you have a sub image then add the image to a JLabel and add the label to the GUI. No need for custom painting. -
How to display two waveforms in one waveform chart?
hellow!anyone can tell me how to display two waveform together in one waveform chart? thanks!
Hello,
An easy way to tell how to make multi-plot charts and graphs is to hold your mouse over the chart/graph terminal on the block diagram and make sure Context Help (Help >> Show Context Help) is enabled. This screen will tell you how to connect the indicator for a multiple-plot display.
You might want to take a look at my attached screenshots of a working multi-plot chart.
Hope this helps!
Liz F
National Instruments
Attachments:
Multi-plot_chart.bmp 902 KB -
How to display two different hierarchical sequential lists in one o/p scree
Hi Gurus,
I have a requirement for displaying two hierarchical lists in one output screen. I have created my hierarchical sequential lists using
function module : - 'REUSE_ALV_HIERSEQ_LIST_DISPLAY', but i dont know how to append my second hierarchical sequential list
into this.
Will it be easily possible through OO ABAP where i will have two containers at the screen and each container will display one hierarchical sequential list at the output screen. But i have no idea how to do this through OO ABAP.
Please help...
Thanks,
Bhupenderi want to display the records corresponding to the user details enterd
in Text Fields in the same Frame by replacintg the previous display..1) Quit multi-posting.
2) You where given an answer in your last posting on the topic.
3) The code isn't formatted so don't expect us to read the code. -
How to display smartforms table lines useing different background colour
Hi all:
How to display smartforms table lines useing different background colour .
for example:
line1:green
line2:red
line3:green
line4:red
line5:green
line6:red
line7:green
line8:red
Any help is highly appreciated!!
启明星Hi,
Create a two lines one for header and second for data in the table.
1)In table painter we can find the pencil mark.
2)select the pencil mark
3)now select the line which you need to shade
4) now select the shading colour in the table painter and the provide the resolution up to 100% and select table pattrn for that line.
5) Now you can use this for the header now only the header gets shaded and the remaining gets unshaded.
reward points if useful
Thanks and Regards,
Nishant -
Obiee 11.1.1.6.6 - analysis displays two dates instead of one prompted
Hi all,
my analysis somehow displays two dates instead of one prompted.
How can it be?
Tell me please what additional information should I include for you to help me.
obiee 11.1.1.6.6
Upd: prompt screenshots
http://marchello.ccx-grads.org/img/BI_prompt_001.png
http://marchello.ccx-grads.org/img/BI_prompt_002.pngThis is from "Administration" -> "Manage Sessions" section of obiee
1) everything seems fine, WHERE clause shows correct date
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/VB/8.RB-213.BI.1';SELECT
0 s_0,
"VB"."VBIREP8"."AASYSDATE" s_1,
"VB"."VBIREP8"."ADAY" s_2,
"VB"."VBIREP8"."AMONTH" s_3,
"VB"."VBIREP8"."ARCDATE" s_4,
"VB"."VBIREP8"."AYEAR" s_5,
"VB"."VBIREP8"."CONTRAGENTID" s_6,
"VB"."VBIREP8"."CONTRAGENTNAME" s_7,
"VB"."VBIREP8"."CREDITS" s_8,
"VB"."VBIREP8"."DEPOSITARY" s_9,
"VB"."VBIREP8"."DEPOSITS" s_10,
"VB"."VBIREP8"."IDENTIFYCODE" s_11,
"VB"."VBIREP8"."OVERDAY30" s_12,
"VB"."VBIREP8"."RESTRUCTURED" s_13,
"VB"."VBIREP8"."SEGMENT" s_14,
"VB"."VBIREP8"."STATUS" s_15,
"VB"."VBIREP8"."TOBO" s_16
FROM "VB"
WHERE
(CAST("VBIREP8"."ARCDATE" AS DATE) = date '2013-08-15')
ORDER BY 1, 3 ASC NULLS LAST, 4 ASC NULLS LAST, 6 ASC NULLS LAST, 5 ASC NULLS LAST, 7 ASC NULLS LAST, 8 ASC NULLS LAST, 12 ASC NULLS LAST, 15 ASC NULLS LAST, 16 ASC NULLS LAST, 9 ASC NULLS LAST, 14 ASC NULLS LAST, 13 ASC NULLS LAST, 11 ASC NULLS LAST, 10 ASC NULLS LAST, 17 ASC NULLS LAST, 2 ASC NULLS LAST
FETCH FIRST 100000001 ROWS ONLY
2) and now attention, I press "next rows" arrow, my WHERE clause is simply ABSENT!
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/VB/8.RB-213.BI.1';SELECT
0 s_0,
"VB"."VBIREP8"."AASYSDATE" s_1,
"VB"."VBIREP8"."ADAY" s_2,
"VB"."VBIREP8"."AMONTH" s_3,
"VB"."VBIREP8"."ARCDATE" s_4,
"VB"."VBIREP8"."AYEAR" s_5,
"VB"."VBIREP8"."CONTRAGENTID" s_6,
"VB"."VBIREP8"."CONTRAGENTNAME" s_7,
"VB"."VBIREP8"."CREDITS" s_8,
"VB"."VBIREP8"."DEPOSITARY" s_9,
"VB"."VBIREP8"."DEPOSITS" s_10,
"VB"."VBIREP8"."IDENTIFYCODE" s_11,
"VB"."VBIREP8"."OVERDAY30" s_12,
"VB"."VBIREP8"."RESTRUCTURED" s_13,
"VB"."VBIREP8"."SEGMENT" s_14,
"VB"."VBIREP8"."STATUS" s_15,
"VB"."VBIREP8"."TOBO" s_16
FROM "VB"
ORDER BY 1, 3 ASC NULLS LAST, 4 ASC NULLS LAST, 6 ASC NULLS LAST, 5 ASC NULLS LAST, 7 ASC NULLS LAST, 8 ASC NULLS LAST, 12 ASC NULLS LAST, 15 ASC NULLS LAST, 16 ASC NULLS LAST, 9 ASC NULLS LAST, 14 ASC NULLS LAST, 13 ASC NULLS LAST, 11 ASC NULLS LAST, 10 ASC NULLS LAST, 17 ASC NULLS LAST, 2 ASC NULLS LAST
FETCH FIRST 100000001 ROWS ONLY
Sure, I receive another date (01.02.2013). Just one thing is strange here - why do I receive only one extra date (I should receive ALL dates in Oracle table when I perform query without any WHERE clause). -
How to display Two frames in HTML....
Hi,
Can someone please advice me on how to display two frams on one page without using FrameSet...
Thanks,Hi,
Thank you for your reply...
I already have something that i did in Applet but i don't want to use Applet....
The problem with frameset is that i will be adding documents Types Dynamically in HTML List and after clicking the Document Type I want to display Image depending on what Document Type is clicked...
Both the DOCUMENT TYPE and IMAGE, I want to create DYnamically. I don't want to create Two HTML Files (one for Image and One for LIST) and then open it from Another HTML Which contains FrameSets...
I hope you get my point....
Is there any other ways i can do this....
Any help will be greatly appreciated... -
How to Display Two Months in Sharepoint Calendar
1. I have SharePoint Server. Do I need other software to the make the following change in Calendar?
2. How to hide Saturday and Sunday or move Sunday to the first day. (Sunday is the last day in my current calendar. )
3. How to display two months on one page?
Thanks.Hello,
For those still looking, you should ask on the
SharePoint forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
How to display two grids in same screen using SALV Method
Hi Freinds,
Please let me know how to display two grids in same screen using SALV Method.
Thank you
Regards,
SDVUsing the same concept as described in How to dispaly Three Internal Table Data (One below another) in ALV OOPS .
All you need to add is passing your new containers as r_container parementer of factory method.
"1st one
cl_salv_table=>factory(
EXPORTING
R_CONTAINER = g_top_container
"2nd one
cl_salv_table=>factory(
EXPORTING
R_CONTAINER = g_bottom_container
Regards
Marcin -
How to sync two iphone 4s to one itunes account on one PC?
Hi
Could you please tell me how to sync two iphone 4s to one itunes account on one PC? I successfully synced my husband's phone to my account ( he got his phone first) but my phone isn't showing up in devices. Very frustrating as he know can listen to all my music and I can't!!
Thanks in advanceTry this, How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495
-
How to display text on last but one page in SAPSCRIPTS
how to display text on last but one page in SAPSCRIPTS
u have create one Foooter window , this has to be called in only One Page.So hardcode /assign this window to only one PAGE number.
regards
Prabhu -
How to display the details of particular order when click on button in sapui5
Hi Experts,
How to display the details of particular order when click on button in sapui5?
I Have a requirement that is i want display all the list of orders coming from backend as shown in image below
then in that i have a button when i press the button it need to display the details of particular order as shown in image below
Please help me .
Thanks & Regards
chittiDoes anyone know how to display the index of current desktop?
Brute force - - I have written the number of the Desktop directly onto the wallpaper picture I am using for each Desktop (easy to do with Preview).
All Desktops are using different wallpaper photos, so they are easily recognized by the color scheme, and in the upper left corner is the number.
Regards
Léonie -
How to display text on last but one page
how to display text on last but one page
Hi Preeti,
If u r working on a smartform then click on th window go to the condition tab there
at the end u will find events click on the the event on which u want to trigger the
print.
If u r working on a script then create a text element and call this text elemtn at
the end of processing of the main window, this will make sure that thetext element
is triggered only at the end.
I hope that helps u , if not pls let me know.
Regards,
Vaibhav B Gawali. -
How to merge two WD components in one WD application?
Hi SDN,
Can any one tell me How to merge two WD components in one WD application?
suppose i have two WD componets z_comp1 & z_comp2 now i want to use both these components in one WD application.
Regards,
Rahul.hi rahul...........
you can use any number of wd components into one component.
eg:
consider you are having 2 components 'A' and component 'B' and you want to embed both into component 'C'.
You can just click the 'Create' icon which will be present in the properties tab of the component controller.
you mention the name of bothe components 'A' and 'B'.
So now the interface controller of both the components are created in component 'C'.
Now you can use the views present in both the components in component'C'.
--regards,
alex b justin -
How to display two pages at a time in smartform
Hi folks,
I have requirement that i need to display two pages for each record of the output table . the page 1 is not simillar to page 2 . page1 contains few templates and page2 contains other templates not simillar to first one.
my case, it displays only the first page eventhough i tried using command line.
Is there any exact step to followed to over come this problem.
Please suggest the solution.
Thanks ,
Hemum.hi,
can u please tell me how and where u are looping throuhg the internal table
check that.
regards,
Ravi Valluri
Maybe you are looking for
-
I need to show in the Dunning letter the assigned standard bank for incoming payment of the business patner. How to do ? Giuseppe
-
How to make the border of a linked pciture go away in IE(8)
picture A links to picture B. A blue border around picture A appears and when I clicked picture A which now links and displays pictures B, but after going back to the page that contains picture A, there is a purple color border appears on picture A i
-
Apple ProRes 422 (HQ) preset
I need to download the Apple ProRes 422 (HQ) preset for Photoshopt CS6, but cannot find it anywhere on the web. I spent quite awhile on the phone with support, and after some pretty exhaustive back and forth, their best recommendation was to refer me
-
How do you make a jumpt to URL with RRI and multiple values (RSBBS)
I cannot for the life of me figure this out. I would like for a user to run a query on my sap portal. Put in a few restrictions, that could be multiples, example ZipCode 33333,45852,15454, CustomerAccounts = 'X', BusinessType = 'Y' etc etc... When I
-
User Home Directory settings in dock using WGM
Hello all: There has to be a simple answer to this problem as I have successfully done this in the past on a Panther server. I just upgraded to Tiger server and want to include the user's Documents, Home Directory, etc in their Dock. However, I can't