How to disply internal table with grid format .

HI ,
how to disply internal table with grid format .
Regards
venkat

Grid format can be disaplyed using two ways,
1. Using reuse_alv_grid_display
2. using object oriented ABAP with the methos set_table_for_first_display.
For example program search in where used list for standard SAP programs.
If this is not the answer then please explain your issue in detail
Thanks,
Rama Krishna

Similar Messages

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

How to print the internal tables in grid format

i have an internal table with 3 fields
ITAB1
1   a
2   b
3   c
I want to print this in the gird like
1   2   3
a   b   c
Can any one help me how to do it
Thank you

DATA: BEGIN OF S_STRUC,
KEY1,
KEY2,
KEY3,
KEY4,
FIRST TYPE CHAR10 VALUE 'FIRST',
SECOND TYPE CHAR10 VALUE 'SECOND',
THRIRD TYPE CHAR10 VALUE 'THIRD',
END OF S_STRUC.
DATA: ITAB LIKE S_STRUC OCCURS 0 WITH HEADER LINE.
DATA: V_INT TYPE INT4.
FIELD-SYMBOLS: <FS>, <FS1>.
DO 3 TIMES.
V_INT = SY-INDEX + 4.
ITAB-KEY1 = 'A'.
ITAB-KEY2 = 'B'.
ITAB-KEY3 = 'C'.
ITAB-KEY4 = 'D'.
ASSIGN COMPONENT V_INT OF STRUCTURE S_STRUC TO <FS>.
ASSIGN COMPONENT V_INT OF STRUCTURE ITAB TO <FS1>.
<FS1> = <FS>.
APPEND ITAB.
ENDDO.
LOOP AT ITAB.
WRITE: / ITAB.
ENDLOOP.
Regards
vasu

How to fill internal table with no data in debugging mode

Hi all,
I modified one existing program.Now I want to test it.I am not given test data.So in the middle of my debugging, I found that one internal table with no data.My problem is how to fill that internal table with few records in that debugging mode just as we change contents in debugging mode.If I want to proceed further means that internal table must have some records.
Please I dont know how to create test data so I am trying to create values temporarily in debugging mode only.
Thanks,
Balaji

Hi,
In the debugging do the following..
Click the Table button..
Double click on the internal table name..
Then in the bottom of the screen you will get the buttons like CHANGE, INSERT, APPEND, DELETE..
Use the APPEND button to insert records to the internal table..
Thanks,
Naren

How to pass internal table with data in ABAP OO

Hi experts ,
Here is the problem...
I create a screen 100 and use the internal table to get data from database, and then press the button on screen 100 , it will call screen 200.
I use ABAP OO code in screen 200, and i want to keep the internal table with data that i get from the sceen 100 parts, but it seems that it just supports to create a new internal table and get data from database in ABAP OO. That means i need to create a new table to save the data in internal table ? Or there is any other solution something like exporting or memory id ...
ps . the internal table in screen 100 is declared in global area, the beginning of the code.
Please give me some advice, thanks a lot!
Regards ,
Claire

I have already know how to do, here is my code:
METHODS fill_tree importing itab2 like itab1.
CALL METHOD: me->fill_tree exporting itab2 = itab1.
In METHOD fill_tree,
declare
data: itab3 TYPE STANDARD TABLE OF itab,
itab3[] = itab1[].
It is useful to me, thanks a lot.

How to convert internal table with dynamic fields to XML

Dear all,
I met a problem like the following:
The aim is to transform the following parameter to XML
IT_FIELD stores the dynamic filed name of the internal table,with these fields, the dynamic internal can be created by cl_abap_tabledescr=>create(it_field)
IT_VALUE stores the value of the internal table dynamically created with dynamic fields.
For example
IT_FIELD =>
line1: FIELD1
line2: FIELD2
line3: FIELD3,
three lines in this internal table.
dynamically created internal table structure FIELD1 FIELD2 FIELD3
And IT_VALUE=>
1 2 3 (First line)
11 22 33
two lines of data.
Do you have any idea about how to transform the IT_VALUE to XML here? And also the transformed XML to the IT_VALUE.( we may need remember IT_FIELD here for later XML to IT_VALUE.)
Hope I describe the problem clearly.
Any inputs will be appreciated.
Edited by: Max Tang on Jan 12, 2009 3:46 PM
Edited by: Max Tang on Jan 12, 2009 4:14 PM

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

How to Fill Internal Table with contents of Select-Option

Hi all:
     There is a select-option s_matnr on the self-made screen.   An internal table t_int is declared in the program. The requirement is that users makes selection with multiple material numbers. I want to put the values of s_matnr into internal table t_int directly. Would you please tell me how?
     Thank you very much in advance.
Edited by: dongdong guo on Jun 13, 2008 3:40 AM

Hi,
Select option works like an internal table only.
For table selection you can use it directly using IN operator in where clause
eg : where matnr IN s_matnr.
Before that you may need to validate the content of the select-option. For that also you need to transfer the content to a new internal table.
u can loop at the select-option.
eq: loop at s_matnr.
      if s_matnr-low = 'MAT1'.
        condition.
      endif.
     endloop.
if you just want to check whether any single valid material number exist in your user screen, then u can use a select single option with s_matnr directly.
select single matnr from mara
            where matnr in s_matnr.
select-option s_matnr behaves like an internal table with four fields.
sign, option, low, high.

How to get internal table with maximum value of a field in other internal

Let say I have an table itab consisting of:
itab-matnr = marm-matnr.
itab-umren = marm-umren.
itab-ean11 = marm-ean11.
there are many "ean11" for one "matnr"
How could I create itab2 with only "biggest" "ean11". could you give me examlple

Hi,
data: mat_no type MATNR.
Loop at ITAB1.
IF mat_no = itab1-matnr.
here check the ean11 with previos ean11(Store it like matnr), and move the biggest one andf modify that row or move that in ITAB2 with a Modify statment, so that there will no second row with same material No
ENDIF.
MAT_NO = ITAB1-Matnr (Moving Itab1 material no to a Local field)
ENDLOOP.
Endloop.

How to modify internal table with new value after data processing

Hi,
My code is as below:
LOOP AT i_raw INTO wa_raw.
   IF ( wa_raw-/BIC/ZOUASCLS = 'BA') OR ( wa_raw-/BIC/ZOUASCLS = 'CO' ) .
      LOOP AT i_crrs INTO wa_crrs.
        IF wa_raw-/BIC/ZOUIDCIF = wa_crrs-ZCBGCIFNO.
          wa_raw-/BIC/ZOUINDAP = '03'.
        ELSE.
          wa_raw-/BIC/ZOUINDAP = '02'.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDLOOP.
Initially column /BIC/ZOUINDAP is empty and I want to populate either value '02' or '03' as shown above.
How do I insert those values into each i_raw records ?
Pls help!

Hello,
try this code:
IF ( i_raw-/BIC/ZOUASCLS = 'BA') OR ( i_raw-/BIC/ZOUASCLS = 'CO' ) .
LOOP AT i_raw INTO wa_raw.
WHERE wa_raw-/BIC/ZOUIDCIF = i_crrs-ZCBGCIFNO.
IF SY-SUBRC = 0.
wa_raw-/BIC/ZOUINDAP = '03'.
ELSE.
wa_raw-/BIC/ZOUINDAP = '02'.
APPEND wa_raw INTO i_raw.
ENDLOOP.
ELSE.
i_raw-/BIC/ZOUINDAP = ' '.
ENDIF.
Hope it helps.
Best regards.
Simone.

How to pass internal table to method of class

Hi all,
I am new to abap objects, i want to pass one internal table to class.
i am trying in this way.
class c1 definition.
method get_material importing t_stpo type any table
                               exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
        for all entries in t_stpo
        where stlnr = t_stpo-stlnr.
endmethod.
endclass.
ERROR:
"stlnr" is not available
if i use this way. its not giing error.
class c1 definition.
method get_material exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
        for all entries in it_stpo
        where stlnr = it_stpo-stlnr.
endmethod.
endclass.
how to pass internal table with some specific reference may be using like or type <it_xxxx>
thanks

Try this.
TYPES : BEGIN OF ty_stpo,
         stlnr TYPE stpo-stlnr,
         idnrk TYPE stpo-idnrk,
         menge TYPE stpo-menge,
        END OF ty_stpo,
        BEGIN OF ty_mast,
         matnr TYPE mast-matnr,
         werks TYPE mast-werks,
         stlnr TYPE mast-stlnr,
        END OF ty_mast,
        tt_stpo TYPE TABLE OF ty_stpo,
        tt_mast TYPE TABLE OF ty_mast.
DATA : it_stpo TYPE tt_stpo,
       it_mast TYPE tt_mast.
*       CLASS c1 DEFINITION
CLASS c1 DEFINITION.
PUBLIC SECTION.
    METHODS : get_bom_numbers EXPORTING ex_stpo type tt_stpo,
              get_parent_material IMPORTING im_stpo TYPE tt_stpo
                                  EXPORTING ex_mast TYPE tt_mast.
    endclass.
*       CLASS c1 IMPLEMENTATION
CLASS c1 IMPLEMENTATION.
METHOD get_bom_numbers.
ENDMETHOD.                    "get_bom_numbers
METHOD get_parent_material.
ENDMETHOD.                    "get_parent_material
START-OF-SELECTION.
DATA : obj TYPE REF TO c1.
CREATE OBJECT obj.
CALL METHOD obj->get_bom_numbers
    IMPORTING
      t_stpo = it_stpo.
CALL METHOD obj->get_parent_material
    EXPORTING
      im_stpo = it_stpo
    IMPORTING
      ex_mast = it_mast.
Regards,
Rich Heilman

How to convert internal table data to PDF format

HI,
I have an internal table data having one field with 255 chars. length.I want to send that intenal table data as attachemnt with external mail. i am thinking of converting that data into PDF format and use the FM to send the mail. How to convert internal table data to PDF format.
Kishore

In which format is your data in the internal table currently. Is it returned by a smartform/script or its just data fetched from some database table into an internal table. Since its obvious that the data should appear in the PDF with some Layout, you should be using smartform to format the data properly. See the Link
Smartform to PDF to EMAIL
This shows convertion of smartform to pdf and send it through email
Regards,
Abhishek

How to create an dynamic internal table with the structure of a ddic table

Hi all,
I want to fill ddic-tables (which I already created) in my abap dictionary with data out of CSV-files (which are located on the CRM-Server). The ddic tables have different amount of fields.
I started with creating a table which contains the name of the tables and the path to the matching CSV-file.
At the beginning I'm filling an internal table with part of this data (the name of the ddic-tables) - after that I am looping at this internal table.
LOOP AT lt_struc ASSIGNING <lfs_struc>.
     LOOP AT lv_itab1 INTO lv_wa1 WHERE ztab_name = <lfs_struc>.
     lv_feld = lv_wa1-zdat_name.
    ENDLOOP.
    CONCATENATE 'C:\-tmp\Exportierte Tabellen\' lv_feld INTO lv_pfad.
    Do.
    OPEN DATASET lv_pfad FOR INPUT IN TEXT MODE ENCODING NON-UNICODE IGNORING CONVERSION ERRORS.
    READ DATASET lv_pfad INTO lv_rec.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    enddo.
    REPLACE ALL OCCURRENCES OF '"' IN lv_rec WITH ''.
    SPLIT lv_rec AT ';' INTO TABLE lt_str_values.
    INSERT into (<lfs_struc>) values lr_str_value.
    CLOSE DATASET lv_pfad.
endloop.
This is not the whole code, but it's working until
SPLIT lv_rec AT ';' INTO TABLE lt_str_values.
I want to split all the data of lv_rec into an internal table which has the structure of the current ddic-table, but I didn't find out how to do give the internal table the structure of the ddic-table. In the code I used an internal tyble type string but I should be the structure of the matching tabel.
If I try to create an internal table by using a fiel symbol, I am told, that the data types are not matching.
Has anyone an idea?

Hi Mayari,
though you were successfull with
METHOD cl_alv_table_create=>create_dynamic_table
I must warn you not to use it. The reason is that the number of tables created is limited, the method uses GENERATE SUBROUTINE statement and this triggers an unwanted database commit.
If you know the DDIC structure, it is (starting with ECC6.0) much easier:
field-symbols:
<table> type standard table.
data:
lr_data type ref to data.
Create data lr_data type table of (<DDIC structure>).
assign lr_data->* to <table>.
The split code can be simplified gaining speed loosing complexity not loosing functionality.
field-symbols:<fs_s> type any.
field-symbols:<fs_t> type any.
SPLIT lv_rec AT ';' INTO table it_string.
loop at it_string assigning <fs_s>.
assign component sy-tabix of wa_string to <fs_t>.
if sy-subrc = 0.
<fs_t> = <fs_s>.
endif.
at last.
append <fs_itwa3> to <ft_itab3>.
endat.
endloop.
Though it may work as Keshav.T suggested, there is no need to do that way.
Regards,
Clemens

How to read an internal table with more than one (2 or 3) key field(s).

how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version

hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
      matnr like marc-matnr,
      werks like marc-werks,
      pstat like marc-pstat,
      end of itab.
data: begin of itab1 occurs 0,
      matnr like mard-matnr,
      werks like mard-werks,
      lgort like mard-lgort,
      end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
       werks
       pstat
       from marc
       into table itab
       where matnr = p_matnr.
sort itab by matnr werks.
select matnr
       werks
       lgort
       from mard
       into table itab1
       for all entries in itab
       where matnr = itab-matnr
       and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
                          werks = itab-werks.
endloop.
regards,
venkat.

How to return an internal table with methods ?

Hi,
I am an Java programmer and very new to ABAP.
How do I return a internal table with a method? I have the table GP1_PRODUCTS and want to return a copy of this table as an internal table called PRODUCTS.
Here is my code that does not work:
class PRODUCTS definition
public
final
create public .
public section.
*"* public components of class PRODUCTS
*"* do not include other source files here!!!
methods GET_PRODUCT_LIST
    returning
      value(PRODUCTS) type GP1_PRODUCTS .
protected section.
*"* protected components of class PRODUCTS
*"* do not include other source files here!!!
private section.
*"* private components of class PRODUCTS
*"* do not include other source files here!!!
ENDCLASS.
CLASS PRODUCTS IMPLEMENTATION.
* <SIGNATURE>---------------------------------------------------------------------------------------+
* | Instance Public Method PRODUCTS->GET_PRODUCT_LIST
* +-------------------------------------------------------------------------------------------------+
* | [<-()] PRODUCTS                       TYPE        GP1_PRODUCTS
* +--------------------------------------------------------------------------------------</SIGNATURE>
method GET_PRODUCT_LIST.
DATA: it_products TYPE STANDARD TABLE OF GP1_PRODUCTS.
select * from GP1_PRODUCTS into table it_products.
PRODUCTS = it_products.
endmethod.
ENDCLASS.

You have to create a table type for your table GP1_PRODUCTS.
If you use global class (created in SE24), than:
Create a Table Type in SE11
Go to SE11, Enter a name like ZPRODUCTS in the Data Type
There will be popup when you press the Create button to decide a type. Select the Table Type
Enter GP1_PRODUCTS in the Line Type.
* method declaration
methods GET_PRODUCT_LIST
    returning
      value(PRODUCTS) type ZPRODUCTS.
If you use local class:
TYPES: ty_products type standard table of GP1_PRODUCTS..
* method declaration
methods GET_PRODUCT_LIST
    returning
      value(PRODUCTS) type ty_products
Regards,
Naimesh Patel

How to create an internal table with a types structure?

Hi experts,
I've 3 internal tables with the same structure, I think I could put a type structure and put that type inside the body of the internal data, is this possible? If true, how can I put that?
Example:
TYPES: Begin of type_s,
               pernr like pa0001-pernr,
             end of type_s.
Data: begin of itab_1 occurs 0,
¿¿¿??? reference to type_s
         end of itab_1.
Thanks a lot,
Regards,
Rebeca

Hi,
Use like this..
DATA: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
DATA: BEGIN OF ITAB_1 OCCURS 0.
INCLUDE STRUCTURE type_s.
DATA: END OF ITAB_1.
Otherwise like this.
types: Begin of type_s,
pernr like pa0001-pernr,
end of type_s.
Data: itab_1 type standard table of type_s.
Note: You have to create work area explicitly.
Like this
data wa like itab1.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 26, 2009 1:04 PM

How to disply internal table with grid format .

Similar Messages

Maybe you are looking for