How to distribute Modelview to external system such as Webmethods

Hi All,
I have a scenario like this
I have to send Delivery idoc to two external systems
                   Triggered through
SAP               output 'ZEXA'.
system        -> DESADV ->     External system (A)
                    Triggered through
SAP               output 'ZEXB'.
system        -> DESADV ->     External system (B)
The distirbution model allows me to add only one external system as the receiver at a time for the message type DESADV, I cannot distribute the model view also ...
How can i achieve this, I dont want to create any Z-message types.. Your suggestions will be higlhy appreciated.
Regards,
Krishnakumar

Hi KrishnaKumar
As far SAP distribution model (ALE ) is concerned SAP does not identify any system as SAP system or External system. It only identifies the system as logical system. And when the distribution model distributes the idoc using RFC and port setting, at that time it actually identifies the system as SAP or External.
So as far as distribution model is concerned you can add external systems also but these should be present as logical system in SAP tables.
And as Shital said there must be some middleware in your design, it could be PI also as well as some FTP server.
Regards
Pranay Gupta

Similar Messages

How to call RFC from external System to get HR Data

According to the requirement the "HR" Workflow has to be able to view the employee details from external system Using the standard Microsoft connectors.
So, my job is to create an RFC where i need to fetch the HR data from the infotypes P0001 and P0002. And they will call this RFC by requesting employees surname, ID number and/or Employee number.
Do i need to simply write OPEN SQL statements in RFC or
do i need to call any BAPI's?
Setting up RFC's(Creation of Destinations) is not our job.
Someone Please help me in this regard with some valuable input. Thanks in Advance.
Ram.

Hi Ram,
to get the information from HR sytem you could call the BAPI
BAPI_EMPLOYEE_GETDATA
Regards
Bernd

How to send Mail to external system - Check the program ?

Hi all,
      The following is a ABAP Program to Send a mail to external mail id. this program is not showing error but when executed it say "No message sent"
what i've to do to overcome this hurdles. if any solution or prerequisites then '
please give me a solution.
PARAMETERS: psubject(40) type c default 'Hello',
            p_email(40)   type c default '[email protected]' .
data:   it_packing_list like sopcklsti1 occurs 0 with header line,
        it_contents like solisti1 occurs 0 with header line,
        it_receivers like somlreci1 occurs 0 with header line,
        it_attachment like solisti1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
data:   it_message type standard table of SOLISTI1 initial size 0
                with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*&      Form POPULATE_MESSAGE_TABLE
      Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform.                    " POPULATE_MESSAGE_TABLE
*&      Form SEND_EMAIL_MESSAGE
      Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform.                    " SEND_EMAIL_MESSAGE
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
      submit rsconn01 with mode = 'INT'
                    with output = 'X'
                    and return.
endif.
endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
Thanks in Advance,
    Manian

Hi,
   I can get the idea but i'm asking u about the prerequisites such as SCOT - sap connect or something else has to be done before executing the program.
if i need any pls let me know?
I've tried the program but it say " No Message sent" and i didn't get any mail to mail id.
thanks in advance,
Manian.

How to send mail to external system

Dear WF Experts,
I have done all the work flow setting in project system module , so that if budget exceeds bya certain %, then mail should go to concern person and its working fyn.
Now i want that same mail to go to some external MS-outlook id.
I tried by putting the mail address in Setting->office setting->automatic forwarding and entered the address.
But the mails are not getting transfered and in SOST transaction i can see the error message like 'Message cannot be transferred to node SMTP due
connection error (final)'
can anybody suggest, where may b d mistake.
thnx in adv.
ashis

Hi Ashis,
This is a very common problem and if you search the forums thoroughly you would find some very good replies to it.
The error that you are getting is because there is some error in the SMTP connectivity established in the system. Ask your basis team to check the SCOT settings.
Check if the correct SMTP host and port been specified in the SCOT settings.
Also check if OSS note 455140 has been applied to your system.
Regards,
Saumya

How to get data from CRM systems?

Hi...
How to use adapters to get data from external systems such as CRM systems.

It is totally depends what kind of message is or are coming out from CRM Systems.
If it is sending IDoc then use Idoc adapter.
If it is BSP and sending HTTP Post then use HTTP adapter.
If you are using proxy then use XI adapter.
thanks
farooq

How to find in R/3 System, which FI document is from which external system?

Hi Moderator/ FICO Experts,
How to find in R/3 System, which FI document is from which external system?
In case of different Non-SAP external Systems posting the data to one R/3 System.
Thanks
Chandra

Hi,
That really depends on the interfaces that your external systems are using. Check with your ABAP or BASIS team to see what is the method used for posting those documents and with which parameters is passed. Look at BKPF table (FI header) to see the attributes such as user, document type, reference, etc.
Regards,
Eli

How do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS x 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

how do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS X 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

Retail Leopard disc looks like this;
(The disc itself has the same logo). If the one you've got is grey it simply won't work.
Given the retail and second hand prices of Leopard (usually some on Amazon MP), you'll probably find it cheaper to go directly to Snow Leopard, although there could be software updates and printer driver problems that could nullify the difference.

How do I integrate SAP R/3 with an external system?

Hi there!
I've run into a problem integrating SAP R/3 with an external system. The external system provides a webservice, and when I try to get WSDL file from that service, I am getting asked of authorization and when I authorize, I get error 500. The access is anonymous, as I'm being told. When I try to get just a response, server requests authorization. No matter what login and password I supply, I always get error 401 saying I'm not authorized.
I think the ICF is somewhat misconfigured, but how do I configure it? Or maybe there's a problem with requests I send. I don't know.
Please help!
Regards, Dima

Hi,
You don't provide any info on how you want to cosnume the web service, but pls check things like
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomas.jung3/blog/2005/04/27/webservice-navigator-page-for-abap-and-java-part-2--abap-unit
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

How to configure a Logical System for XI External System

I'm following the 'How to configure SAP XI to use the standard SAP communications APIs (idoc, pabi, rfc) from external system - How to create XI content with the Integration Builder' document.
I have everything configured, but in section 6.7 when I try to do a transaction BD10 on to send a MATMAS01 idoc using my Logical System IQS_EXTERN to my external system, it says '1 master IDocs set up ...', then it says '0 communication IDocs generated ...' and my external system does not get the IDoc. The NX7 Integration Engine does not get a message from SAP_CE8 to IQS_EXTERN.
How do I specifically configure my Logical System IQS_EXTERN to communicate with my external system via XI (NX7)?
I'm using the ICC Test-System CE8, SAP R/3 Enterprise 4.7 IDES and the NX7 Exchange Infrastructure (http://iccpi7.sap.com/rep/start/index.jsp).
Thanks,
Ed Culnane
Edited by: Ed Culnane on Oct 15, 2008 7:02 PM

Check whether you have setup Partner profile for receiving system ( Here its XI system). You need to create outbound parter profile for XI system.
Check out this forum ...
Re: trying to send Idoc using Standard Outbound Processin option
and blog ..
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Hope this will help.
Nilesh

How do I get my external microphone to go through my speaker system for on-line karaoke?

How do I get my external microphone to go through my speaker system for on-line karaoke?

You can use a simple little App called LineIn to Pass Thru Audio from Input to Output.
Go to > Rogue Amoeba | Freebies: Free Software for Mac OS X

How the external system will talk to ECXpert 3.5 for transfering files via HTTP SSl?

We are using ECxpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
How the external system will talk to ECXpert for transferring files. (We need the syntax for the URL). How ECXpert will receive XML file through HTTP-SSL protocol from External System and file submittion.
Please send is there any other document which explain about. Thanks in advance for your help. [email protected] or [email protected]

Hi Steve,
You can bring the GRC framework to a state equivalent to a raw install by following options:
Option 1.) You should have a base-line backup before GRC installation. If so then apply that base-lin backup and deploy GRC components. If there is no base-lin backup, then
Option 2.) Uninstall and re-install J2EE and then follow up with rest of the installation process. If you don't want to go through re-install process, then
**Correction to Option 3**
Option3.) SAP is in process of creating a SAP Note for Delete script, Instead of delivering Delete Script script via OSS message. Will update you as soon as the Note gets released.
Please refere to Note # 1416728 to Manage your deletion in RAR 5.3 SP10.
Hope this helps.
Best Regards,
Sirish Gullapalli.

How to send IDOC's to external systems

Hi everybody,
I'd like to get information of how I can send one IDOC to an external system.
I have to send data about access control and e-learning from R/3 to external system, I think an IDOC is the perfect way to do it, but I don't know all the steps involved.
Could anyone explain me or give some document or link in with I could see all the steps from the selection of the IDOC (What to do if the idoc doesn't fit exactly) until the IDOC is out of the r/3 system, how to configure the ALE, etc
Thank you very much.

This document might be helpful:
http://www.angeli.biz/www5/books/IDocBook/IDocBook.pdf
It's a bit outdated but most of the info is still actual. If you anticipate a lot of ALE/IDoc projects, I suggest getting this book: http://www.amazon.com/IDoc-Technologies-Prima-Techs-Book/dp/0761534318/sr=8-1/qid=1170864257/ref=sr_1_1/103-6659593-2860615?ie=UTF8&s=books
It is out of print right now but I've heard that more copies are coming out this year. This is the most comprehensive book available on the market at this time.

How to catch the response of external system

Hi i have a scenario like to send a request and get the response
If we use invocation type as realtime for outbound message type in external system then we can add both request xsl and also response xsl
but if we use invocation type as xai for outbound message type ,where can we add the response xsl file
how to convert the raw response
plz help me.

shanker,
We are currently developing Outbound Messages at my client. This stuff is new to me and unfortunately, the documentation does not go into a lot of detail, but I'll give you an explanation of how I understand the differences in the response processing for XAI & Outbound Messages.
If you define the Outbound Message with a processing method of 'Real-time', XAI will send the request and it expects an immediate response. It keeps the connection open until it receives the response. There is even a Context parameter you can set how long you wish to wait for a response before it times out. So unlike XAI which is asynchronous, this processing method 'appears' to be synchronous, because the request waits for a response and when it is received, will update the Outbound Message with the response. And since you expect a response, CC&B allow you to define a response XSL on the External System / Outbound Message Type configuration.
What is still unclear to me is the setting of HTTP Transport Method in the Context Tab. Possible values are 'send' and 'sendReceive'. How is the different values affect XAI & Real-time messages?
Any comments are welcome.
Andries

How to send sapmails to external mail systems

Hi,
how to send sapmails to external mail systems....
like if we want to mail a purchase order from SAP System to *@yahaoo.com or @.com.
TY.

hi manish,
u can do it.
chk this .
chk this code
DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
*& Form f_send_mail
text
--> p1 text
<-- p2 text
FORM f_send_mail .
*store the vendor name, vendor email id , employee name and employee
*email id in the internal table int_crb
Creation of the document to be sent
CLEAR doc_chng.
REFRESH objpack.
REFRESH objhead.
REFRESH reclist.
REFRESH objtxt.
File Name
doc_chng-obj_name = 'SHIPMENT'.
Mail Subject
CONCATENATE 'Shipment Document No.' int_crb_mail-shipdocnum
'Cleared.'
INTO doc_chng-obj_descr SEPARATED BY ' '.
Mail Contents
objtxt-line = 'Hi,'.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CONCATENATE 'Shipment Document Number ' int_crb_mail-shipdocnum
' cleared for move.' INTO objtxt-line SEPARATED BY ' '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
CLEAR objtxt.
objtxt-line = 'Regards '.
APPEND objtxt.
objtxt-line = ' '.
APPEND objtxt.
objtxt-line = 'SAP '.
APPEND objtxt.
CLEAR objtxt.
APPEND objtxt.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN(
objtxt ).
Creation of the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
Completing the recipient list
target recipent
CLEAR reclist.
reclist-receiver = int_crb_mail-empperid. "employee email ID
"wf_empperid.
reclist-express = 'X'.
reclist-rec_type = 'U'.
APPEND reclist.
copy recipents
CLEAR reclist.
reclist-receiver = int_crb_mail-smtp_addr."vendor email id
reclist-express = 'X'.
reclist-rec_type = 'U'.
reclist-copy = 'X'.
APPEND reclist.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
COMMIT WORK.
SUBMIT rsconn01
WITH mode = 'INT'
WITH output = ' '
AND RETURN.
ENDFORM. " f_send_mail
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]

How to send delivery document from external system to ECC

i have a business requirement to send a delivery and billing documents from external system ( MS access ) to ECC
could any one light me how to do this ???
Thank you in advance

Hi Ahmed,
Talk to your middleware team, They will upload the data through RFC.
Basiclly RFC(Remote function call) works like it will call the function module and then upload the data.
For more information, check the link given below.
http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
Hope this helps,
Regards,
MT

How to distribute Modelview to external system such as Webmethods

Similar Messages

Maybe you are looking for