How to do file validation with ODI 10.1.3.5

Hi Team,
Please help me, how to handle file validation with ODI?
My source is files.
Requirement:
With ODI i have to do the file validation and file data loading successfully. Once it is successfully done then i have to move the particular file and move to different directory.
Any internal tool is there in ODI package to watch the file.
Regards,
Suresh

Hi Suresh,
You can do your file loading and validation in an ODI interface.
Once you are done with the interface, add it to a package, you can set up subsequent steps in the package to move the file to another location using the built in ODI file utilities in the package.
Terrence.

Similar Messages

  • How  to integrate File Server with Portal??

    Hi all,
    can any one tell me that how interegate the File Server With Portal Server??
    In my portal server under home tab i have sub tab (second level navigation) of File server.Whe i click this tab it throws an syntax error
    ie
    System Error
    An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
    Exception Class  :: class com.sapportals.wcm.repository.NotSupportedException
    Exception Message  :: Not Implemented
    thease are the steps that i have taken
    >created HTTP System..
    >created WebDAV Repository.
    >Created Cache.
    >Created KM WebDAV System.
    >Created Iview and in iview i have to specify the <b>Path to Initially Displayed Folder</b>
    i have specified the folder of file server that i want to display..
    but i get the same syntax error ..
    infact i dint get that folder in KM.
    But when i specify the folder that is present in KM its Work fine..
    Now the Scnerio According to me is that File server is not integrated properly
    if it would be integrated properly i would be able to see the folder of File server in  KM...
    am i correct ??
    please Guide me to integrated the File Server Properly??
    Points will be given for any help..
    Regards
    Vinit

    Hi Vinit,
    if you want some Windows File Server integrated into Portal, please do not use a WebDAV Repository, but use the File System Repository instead. Therefore you need to configure the according Repository Manager. Please refer to this documentation:
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
    HTH,
    Carsten

  • How to use File Adapter with hierarchial Structure?

    Hi,
    How to use File Adapter with hierarchial Structure like..
    Data:
    --Header Details:
    Line Item Details:
    Data
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d
    Kishore

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • How can I file share with another person if both of us are using Mac operating systems?  Do we need to use a third party file sharing system or does apple have this capability?

    How can I file share with another personif both of us are using Mac operating systems (one of us using a Mac laptop and the other using iMac).  Our intention is to have a working document that can be changed by both parties over time and both parties will have visibility to the others changes.

    Use SugarSync

  • (Urgent) How to read file properties with virtual path?

    I have the data.properties file, and write a servlet file to read properties from this properties file. But I get a problem, that is: I CANNOT USE VIRTUAL PATH!
    How can I solve?
    My Application Directory is,
    WEB-INF
    classes
    loadProperties.class
    data.properties
    More Question,
    I can use Context in Web.xml to assign values to parameters. But its will be shown. How can I hide value with a properties file?

    This is not working.
    I am using Tomcat 4.0.6, for my JSP application I am trying to read ini.properties file from \webapps\myapp\WEB-INF\classes\common\
    directory through java bean.
    System.getProperty("user.dir")
    is giving <tomcat-home>\bin directory.
    unless I hard code the path this way, I could couldn't read the ini file.
    Properties props = new Properties();
    String strIniFilePath = <webappPath> + "\\WEB-INF\\Classes\\Offenders\\Common\\";
    props.load( new FileInputStream(strPropsFile));

  • How change the File Open With list of apps?

    In Bridge CS3, how does one edit the list of applications in the File > Open With menu (also available from the contextual menu for any image).
    The list contains a number of applications that I would never use to open an image, and I would like to add to it, a new image editor (pixelmator) that does not appear in it. I have looked in the Bridge Help and the Preferences dialog and don't see any option to do this.

    OK, I have now learned that Mac OS keeps the list of which apps to open what, in the "launch services database."
    This database can be cleaned up and reset which somewhat simplifies the list that is displayed by the Finder OR by Bridge CS3.
    Here is an article on how to reset the launchdb:
    http://www.macosxhints.com/article.php?story=20031215144430486
    Be sure to read all the way to the end as there are updated instructions down among the comments.
    Here is a thread in the Apple Support forums discussing the same issue, and it includes links to some 3rd-party programs that can reset launch services without use of a lengthy Terminal command:
    http://discussions.apple.com/thread.jspa?messageID=1289317
    Even after rebuilding the launchdb, I find that a large number of apps are "registered" to open JPG files, including Camino, Opera, TextWrangler and others with only a tenuous connection to JPG. I don't understand why this is, and I would still like to find a way to limit the JPG Open-With list to a few graphics programs. But cleaning up the launchdb as described in the linked pages, did get rid of some programs and added some missing ones.
    Hope this actually constructive info is useful to others.
    Dave Cortesi

  • How to place file names with thumbnails?

    I have several thousand images that need to go online but I cannot for the life of me figure out how to add file names to the thubnails. Every bit of documentation I've read talks about adding it to the larger images only. I figured that part out but can't I have file names for the thumbnails too?

    Bummer. I was hoping for a secret key to take me there. I have too 
    many images that can be scanned via thumbnails and for the detail 
    shots they can go larger. There is no way I can use this as it is with 
    9000+ images that need to be gone through quickly. Thanks for the 
    answer.
    Mark

  • How to do that - Validation with message

    Hi
    I have a litle app that validates one Portuguese Number (NIF).
    The purpose is create a textbox where the user put the number and then when press tue button, it validate then.
    I've tried do that with the validation, with a plsql function returnig boolean... it works fine when the number is wrong...
    the error message was fine... how can i implement a sucess message...
    Sugestions are welcome.
    Another question.... How can i costumize the standard error message?
    Sorry for the bad english
    Thanks

    José,
    Yes that would work. Because you're catching all of the incorrect entries with a validation, the PL/SQL process will never run unless you have the validation is TRUE. This means the process code can always complete successfully because the validation already did the work. So the process need be only one line:
    NULL;
    Then create the success message as you like and test it. Keep in mind that a process success message may look different from a validation failure message. You might have to modify the look a bit to get them consistent if that's necessary.
    Dan

  • How to identify files associated with apps?

    Hello all -
       I am considering buying a new Mac mini which would come with Yosemite.  My existing mini (mid 2011, Lion 10.7.5) has a lot of apps I do not wish to migrate, so I think I am stuck with manually reinstalling each of the apps I want on the new computer.  How do I identify the necessary files associated with these apps (preferenes, app support, etc.) so I can copy them over after reinstalling on the new computer?  Is there any way to track what files were installed along with the app when it was first installed?  Anyone familiar with the claim of CleanApp to log all associated files with an installation (at time of install), or any other software that does this?
       Thanks - Randy

    Thanks again Arthur for your response.  I looked at RoaringApps but was not sure if I should enable the real time or just use basic.  Real time seems to require a lot of downloading (and modification?)   What do you recommend - Real TIme or Basic?
    As far as SunnyMenu, it is old but has worked flawlessly through and including Lion 10.7.5.  The only alteration of the system is that it is added as a startup item in my User in System Preferences.  It does not change the GUI, but adds menus (that you can customize) in addition to, rather than changing what System X does.  The Dock will not accomodate nearly as many items and SunnyMenu allows for nested subfolders of menu items.  I find it extremely useful and use it every day. I realize one day it will no longer work, but hope that, as it's pretty simple, that may be a bit further off.  As a rule I don't dabble in System modifiying stuff like maintenance, clean-up, speed-up, "optimization" etc. and just rely on System X.  I do have iStat Menus, but I don't believe that's modifying the System, but only displays information.  RoaringApps seems to indicate it's compatible with everything through Yosemite.  Would you recommend against that as well?  It saved me once when my fan failed but I noticed the iStat temp & rpm display and got it repaired at my Apple Store before I completely toasted my mini.
    Thanks again for your replies, they have been extrmely helpful in understanding how to start planning my move to a new Mac mini with Yosemite!

  • How to use Spry validation with link styled submit buttons..??

    I'm working with a theme package that comes with a bunch of button styles that work with basic links.  For example:
    <a href='page.html' class='small-button smallblue'><span>Button Label</span></a>
    I've got a basic form setup with Spry validation, but the submit button needs some styling to make it look nice with the site.  Since there are already styles ready for me to turn links into buttons I figured I'd use the same thing for my submit buttons.
    To accomplish that, I'm using the following javascript...
    <script type="text/javascript">
    function submitForm() {
        document.getElementById("form_name").submit();   
    </script>
    And then I'm updating my submit button to something like this...
    <a href='javascript: submitForm()' class='small-button smallblue'><span>Button Label</span></a>
    When I do this, the form submits as expected, but the Spry validation doesn't work.  Is there a way I can make the Spry stuff work with these types of buttons?  I know I could create separate styles for the submit buttons themselves, or I could use an image type button, but I'd really like to figure out how to get these existing styles to work for me since the theme already has so many of them done for me.
    Any information on this would be greatly appreciated.  Thanks!

    Save yourself a lot of trouble and style the normal submit button as per
    <!doctype html>
    <html>
    <head>
    <meta charset="utf-8">
    <title>Untitled Document</title>
    <script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
    <link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css">
    <style>
    .Standout {
        font-family: Geneva, Arial, Helvetica, sans-serif;
        text-transform: uppercase;
        color: #FFFFFF;
        font-size: 16px;
        background-color: #CC0000;
        font-weight: bold;
        border-style: none;
        padding-top: 6px;
        padding-bottom: 5px;
        padding-right: 64px;
        padding-left: 64px;
        letter-spacing: 1px;
    .Standout:hover {
        background-color: #000000;
    </style>
    </head>
    <body>
    <form action="" method="get" name="myform">
      <span id="sprytextfield1">
      <label for="text1"></label>
      <input type="text" name="text1" id="text1">
      <span class="textfieldRequiredMsg">A value is required.</span></span>
      <input name="input" type="submit" class="Standout">
    </form>
    <script>
    var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "none", {validateOn:["blur"]});
    </script>
    </body>
    </html>
    Gramps

  • How to do schema validation with XSD_90200B Beta?

    Hi, I just downloaded xdk_java_9_0_2_0_0B.zip. And found that the size of xmlparserv2.jar and xschema.jar are significantly reduced. And if I replace them with the June version I had before, it does not do schema validation anymore.
    What other jar files do I need to do Schema Validation?
    Thank you very much!
    Yufei
    null

    The schema validation is in the xschema.jar.

  • XML file validation with XSD and loading to database relational table

    Hi all,
    I have some xml files coming to my unix directory. I will be having an XSD for those. My task is to validate those xml against given xsd and load the corresponding data into oracle relational tables with sqlloader only.
    Please help me to accomplish. and let me know the contents of control file ( for SQLLOADER) if i want to load the xml directly to database.
    Unix and/or PLSQL suggestions both are welcome.

    My problem area is loading the XML to Oracle relational tables using sqlloader.
    suppose, the xml is <?xml version="1.0"?>
    <Customers>
    <Customer>
    <CustID>1</CustID>
    <Company>Bell South</Company>
    <City>New York</City>
    </Customer>
    <Customer>
    <CustID>2</CustID>
    <Company>Barnes &amp; Noble</Company>
    <City>New York</City>
    </Customer>
    <Customer>
    <CustID>3</CustID>
    <Company>Comp USA</Company>
    <City>Tampa</City>
    </Customer>
    <Customer>
    <CustID>4</CustID>
    <Company>Borders</Company>
    <City>Charlotte</City>
    </Customer>
    </Customers>
    and I have a relational table
    CREATE TABLE CUSTOMERS
    CUSTID NUMBER,
    COMPANY VARCHAR2(100 BYTE),
    CITY VARCHAR2(100 BYTE)
    how to insert the xml data into the table???
    please help..
    Edited by: nuon on Oct 25, 2010 6:25 AM

  • How Does the scheduler works with ODI engine

    Hi All,
    I am new to the ODI and I was going through the documents over the web regarding the scheduling.
    Can anyone please let me know how does the Scheduler in ODI is coupled with the ODI engine.
    How does the internal scheduler works and how does the external one works. What are the processes the it calls while invoking the scheduler.
    Your help will be highly appreciated.
    Thanks,
    Sumit

    Scheduling in ODI is controlled by a special type of ODI agent, strangley called the ODI scheduling agent. This agent is installed as a service and as well as being responsible for all tasks associated with a normal agent is also responsible for managing ODI jobs based on any scheduling information associated with an ODI scenario. All scheduling information is stored in the ODI repository and the scheduler agent reads from this to determine which jobs/scenarios need to be executed and when.

  • How to save files received with iChat?

    I was in a text chat with a friend. He sent me an mp3 file, and it showed up in the chat window with the familiar play controls of Quicktime.. I was able to listen to it and everything. However, I couldn't figure out how to save the files??? All I could do was play, rewind etc...no way that I could see to save it.
    Any help you can provide?
    Thanks,
    John
    PowerMac G5 Dual 2.3   Mac OS X (10.4.2)  

    Hi John,
    You should be able to drag it from the window to the Desktop and subsequently, any folder.
    Alternatively you can set iChat to save all Chats and replay it from there.
    Or use Save As when the App that uses the files is open with the file in question.
    Ralph

  • How old data file replace with new 10g installed datafile

    Sir
    I my 10g is corrupt
    I copy all 10g folder in other my usb and install new 10g with same name
    I want to use all old user and data from usb
    Please give me which folder or datafile change with new file
    Old 10g database file mfa10g
    New 10g database file mfa10g
    How use old data and user
    Please give me step by step detail
    Thank you

    Before I attempt to answer,answer the following questions
    1)Which o/s you are working upon?
    2)When you say files are corrupted,which files are corrupted,database files or software files?
    3)Which files you have copied?Your oracle database files ?
    For the last part,
    Please give me which folder or datafile change with new file
    Old 10g database file mfa10g
    New 10g database file mfa10g
    You can't just put one file from somewhere and "plug-in" with your database.Either you have to recover that file which has another complications or you have to restore the entire old database.
    Answer the questions that I have just asked.This will help for a better answer .
    Aman....

Maybe you are looking for