How to do import of only table data without procedures and synonyms

Hello All,
I want to import only the tables of one database to a new database. I did a table level export of one schema. But along with it the stored procedures,synonyms, views etc are exported. Is there any way to stop them. Or is it possible to import only the tables from the dump created?
Regards
Satish

Hi Maran,
Thanks for the feedback. I think I didnot specify the parafile with the table list while exporting. I am redoing it now. I shall update this post within 20 minutes.
Regards
Satish

Similar Messages

To export and import oracle 11g table data only

Hi Gurus,
Just not sure of the procedure to follow in the export just the table data and then truncate the table do some changes(not table structure changes ) and then import the same table data in to the relevent table .
Could some please help me in the setps involved in it .
Thanks a Lot in advance

If you can use Data Pump, here are your commands:
expdp table_owner/password directory=<your_directory> dumpfile=table_name.dmp tables=table_name content=data_only
impdp table_owner/password directory=<your_directory> dumpfile=table_name.dmp tables=table_name table_exists_action=append
Data Pump requires version 10.1 or later.
Dean

Writing a stored procedure to import SQL Server table data into a Oracle table

Hello,
As a new DBA I have been tasked with writing a stored procedure to import SQL Server table data into an Oracle table. I have been given many suggestions on how to do it from SQL Server but I I just need to write a stored procedure to run it from the Oracle side. Suggestions/guidance on where to start would be greatly appreciated! Thank you!
I started to write it based on what I have but I know this is not correct :/
# Here is the select statement for the data source in SQL Server...
SELECT COMPANY
,CUSTOMER
,TRANS_TYPE
,INVOICE
,TRANS_DATE
,STATUS
,TRAN_AMT
,CREDIT_AMT
,APPLD_AMT
,ADJ_AMT
,TRANS_USER1
,PROCESS_LEVEL
,DESCRIPTION
,DUE_DATE
,OUR_DATE
,OUR_TIME
,PROCESS_FLAG
,ERROR_DESCRIPTION
FROM data_source_table_name
#It loads data into the table in Oracle....
Insert into oracle_destination_table_name (
COMPANY,
CUSTOMER,
TRANS_TYPE,
INVOICE,
TRANS_DATE,
STATUS,
TRANS_AMT,
CREDIT_AMT,
APPLD_AMT,
ADJ_AMT,
TRANS_USER1,
PROCESS_LEVEL,
DESCRIPTION,
DUE_DATE,
OUR_DATE,
OUR_TIME,
PROCESS_FLAG,
ERROR_DESCRIPTION)
END;

CREATE TABLE statements would have been better as MS-SQL and Oracle don't have the same data types.
OUR_DATE, OUR_TIME will (most likely) be ONE column in Oracle.
DATABASE LINK
Personally, I'd just load the data over a database link:
insert into oracle_destination_table_name ( <column list> )
select ... <transform data here>
from data_source_table@mssql_db_link
As far as creating the database link from Oracle to MS-SQL ... that is for somebody else to answer.
(most likely you'll need to use an ODBC driver)
EXTERNAL TABLE
If the data from MS-SQL is in a CSV file, just use and external table.
same concept:
insert into oracle_destination_table_name ( <column list> )
select ... <transform data here>
from data_source_external_table
MK

How can I import not only apps from the old iphone to the new iphone, but also the content of the apps?

How can I import not only apps from the old iphone to the new iphone, but also the content of the apps?

You can sync apps as you normally would, but I do not believe this copies over app specifc data (i.e. saved game status/scores).
You can always restore your new device with a backup from your old device.

Cmd for exp and importing all the table data's in a specified schema

i need to export table data without exporting the defenition how can i do this

Why do you have such a requirement?
Are you worried about import failures if the object already exists on the database?

How do i find out the tables (data)effected in a schema after a particular time stamp

how do i find out the tables (data not structure)effected in a schema after a particular time stamp?
pls email in [email protected]

You can't do that. That would be a real security risc.
/KAj

How to display table data without using ALV and table element.

Hi,
        Its possible to display table data without using ALV and table element.
       Every time i am fetching data based on (customer,status) fields and displaying these data in my output using alv
       (every time i am fetching single row data ),
       But problem is alv occupying more space in the output , i want to display data part only i dont want field names,
       settings and header data etc..things.
      Give solution to display data part..
Regards,
Rakhi.

Hi,
Does you mean that you need ALV without default Function Toolbar...? If this is the case, the easy solution would have been to use Table Element rather. But, if you need to use ALV only without Function Toolbar, you can do away with that as well.
In that case, after calling GET_MODEL, you need to add few more lines of codes to achieve your goal. Those lines are --
DATA LV_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    LV_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
* Standard Filter Function setting to FALSE
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_FILTERLINE_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_DISPLAY_SETTINGS_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_HEADERCLICK_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_HIERARCHY_ALLOWED( ABAP_FALSE ).
* Standard Filter Function setting to FALSE Ends
Here as you can easily notice that LV_VALUE is instantiated on CL_SALV_WD_CONFIG_TABLE. Now, using this LV_VALUE, you set standard functions as False to dis-allow their display.
Hope this answers your query.
Thanks.
Kumar Saurav.

How to get only the date without the time in the footer of a printout?

Is there a way to get only the date without the time in the footer of a printout?

As far as I can tell, there's no built-in option to get the date printed without the time. It's hardcoded in a C++ file.
As a workaround, you can enter custom text for the footer, but it would need to be updated every time the date changed. I can think of a couple ways to automate that:
* An add-on (but I'm not aware of any add-on for this)
* External process to push a new date into prefs.js, a settings file that stores your header/footer preferences, among others (but Firefox should be closed when you update this file, and it will be read when you restart)
Not easy enough, I know.

Why there is no datatype which only stores date (without time part)

Hi All,
Is there any specific reason for not having a data type which only stores date (without time part) in ORACLE - I am asking this because DATE (without time) is a very frequently used data type in any application.
Thanks.

884476 wrote:
Then why ORACLE is allowing to have scale and precision in a NUMBER data type. If I want to store an integer there is no harm in storin it just as NUMBER. But I habe option to give something like NUMBER(10). But in DATE, the time part is mandatory.a) because there's no need for seperate DATE and DATETIME datatatypes, and b) the time part is not 'mandatory'.
SQL> create table mytable (x date);
Table created.
SQL> insert into mytable (x) values (to_date('01/01/1980','DD/MM/YYYY'));
1 row created.
SQL>The DATE datatype contains the Time as well, to make it flexible... a single datatype that can do both things without the need for any conversion between datatypes (either explicitly or implicitly).
Yes, many application need to have fields on the screen that just show a date, such as a date of birth as you say, but that's simply a display issue, and any application interface will allow for a date format to be specified for displaying the data from the database, so in terms of such "Date only" dates, you would simply use a format mask that ignores the time portion.
There's absolutely no issue with the fact that it's just a single datatype... it causes no problems... it's perfectly flexible at being used for just dates or for dates and times... so why such a concern?

How is the 'import-packages' information saved in the database, and how long?

Hello,
I am developping a ECM Connector for Adobe LiveCycle ES, which is a customized component.
1 - Who should I contact to have some specific support ?
There is no detailed information yet on this on the adobe site (http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?href=000931.html&accessible=true) .
If you think that I should address my problem to another department of Adobe, please tell me which department?
I give you another description of my problem. In fact, I have been investigating on it.
2 - If I put this in my component.xml file, in step 1:
<component-id>com.rsd.adobe.livecycle.RSDFoldersConnector</component-id>
<version>1.0</version>
<import-packages><package version="1.0">com.rsd.simpleApiFolders</package> </import-packages>
If I change the version to 1.1 and remove the 'import-packages' (in step 2) , will the new component need the com.rsd.simpleApiFolders package. It seems that is still needs it.
3 - How is the 'import-packages' information saved in the database, and how long?
In fact, on thursday, I used 'import-packages' to make a test. And since them, I can not deploy any of my components.
LiveCycle throws a ClassNotFoundException.
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
[java] at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$6.doInTransaction(Compone ntRegistryImpl.java:338)
... Caused by: java.lang.ClassNotFoundException: http-0.0.0.0-8080-1Class name com.rsd.simpleApiFolders.Context from package com.rsd.simpleApiFolders not found.
[java] at com.adobe.idp.dsc.DSContainerSearchPolicy.searchClassUsingParentFirst(DSContainerSearchPo licy.java:234)
Thank you in advance
Regards.

1 - Who should I contact to have some specific support ?
That would depend on your Adobe support contract and if your organization has a TAM assigned. You should check with your organization's Adobe contact and see what support options your organization has purchased.
Having said that, this forum has a few people that may be able to help (but the forum does not have a SLA associated with it)
2 - If I put this in my component.xml file, in step 1:
<component-id>com.rsd.adobe.livecycle.RSDFoldersConnector</component-id>
<version>1.0</version>
<import-packages><package version="1.0">com.rsd.simpleApiFolders</package> </import-packages>
If I change the version to 1.1 and remove the 'import-packages' (in step 2) , will the new component need the com.rsd.simpleApiFolders package. It seems that is still needs it.If your component class needs the simpleApiFolders class then yes, you still need it. Think of import-packages like a class-path statement (but with packages and not jars). Its not physically moving the package into your application, but allowing you to access it from another container.
3 - How is the 'import-packages' information saved in the database, and how long?
As far as I know they are not imported into the database. As I stated above, I believe that the import-packages just allows you to point to classes that are in the app server's classpath, but are not physically in you component jar file. As long as that class is in the app server class-path (or in the Adobe EAR file) then you should be able to access it. Is the jar file containing the simpleApiFolders class in the app server's lib directory?

How do we decide the number of data base servers and application servers ?

Dear Gurus,
How do we decide the number of data base servers and application servers in BW ?
How does this number help in data load balance and reporting needs ?
Any hard n fast rule in the number of servers ?
Regards
Mohan

Hi Mohan,
Check the number of application server in the T-code SM66.... and also u can check the it in Sm50 on appplication server basiss./.
From Sm37 u can see the application server Push button.. if u click on that also.. u can see the number of application servers in the system..
Get into the individual application server and check how many Dialogue and background WP's are free,,
If u see that the considerable number of WP are free(Waiting for task).. then u can shedule the loads..
If most of the WP are busy then u need to wait to trigger ur loads to maintain the load balancing..
If one Application server is too busy then u can check the other Application Servers in the systems..
And u can shedule the loads on a specific application sever level as well using the PC..
Thanks
I hope this is clear to u..
Assign points if this helps

I have too much music on my i phone( purchased): This synchronises with my computer and i pad which has larger storage facility: How can I delete music only from my i phone and retain it on my computer and ipad?

I have too much music on my i phone( purchased): This synchronises with my computer and i pad which has larger storage facility: How can I delete music only from my i phone and retain it on my computer and ipad?

On the iPhone, go to Settings > General > Usage > Music (in the Storage Section) > Tap Edit > Tap the Red Circle next to All Music > Tap Delete.

How to fix the size of table data in html

I want to fix the size of table data in html. ie if i want to insert only 50 char in a <td> field then it contain only 50 character, after that it switched to another line and contain the remaining character. Means <td> field wil not get automatically adjust there size according to data.

you cant specify how many characters a td cell can have but u can specify the pixel width of a td cell
<td width=50>
as long as you have wrap text on, then text will not force the box size over the 50 pixels
this wont limit it to only 50 chars though, you will probably have to use some javascript to cut the string down to size (unless youre using something like php or asp then that will do the trick too)

How I can display images as table data?

Dear project Marvel,
I would like to display images as one of table data, but I do not know how to easily store image data into tables using htmldb and whether I can display the stored images. Does anyone knows how I can store/display images using htmldb? If I cannot do this easily then displaying image (which is stored somewhere else but) just looks like one of columns also fine to me.
Thanks in advance,
Rui

you can show those images inline in your report region if you call our "p" procedure in an image tag. so the example above has you creating a table that you then join to the wwv_flow_files view with a query like...
select htf.anchor('p?n='||f.id, f.filename) name,
f.doc_size, f.mime_type, m.upload
from my_docs m, wwv_flow_files f
where m.filename = f.name
...clicking on the links in the first column would return a page that just showed the associated image. if changed that anchor tag to an image one like so...
select '<img src="p?n=' || f.id ||'>' the_image,
f.doc_size, f.mime_type, m.upload
from my_docs m, wwv_flow_files f
where m.filename = f.name
...your images would then appear inline as opposed to on a separate page.
[Edited by: rmattama on Sep 25, 2003 1:22 PM]
i'm not sure how, but i'd earlier posted an incomplete answer to rui's question. i've fixed some of the above and added this below...
just fixed the html above so it renders correctly in this forum. sorry i didn't see that earlier. also, i'm not sure where the rest of my post went, but rui had also wanted to know what the wwv_flow_files was. that's a view to the table we use to store uploaded BLOBs like images, css's, and stylesheets. since you can only identify one document table in your DAD configuration, we give you this view to allow you access to that doc table that HTML DB owns.
fyi,
raj

How to find that from which table data is coming in datasource?

Hi friends
I want to find that from which tables data is coming into datasource 2LIS_04_P_COMP,2LIS_04_P_MATNR..
I have searched in forums.. I also have checked in sap.help.. but I didnt get any tablename in field "Table of origin"..
Please tell me how can I find that data is coming from which table into these datasources..
I dont want name of the setup tables.. I want name of the original tables (in R/3)which has data..
Regards
Swati

Hi......
For data source 2LIS_04_P_COMP............MCAFKO, MCAFPO, MCCOMP are the R3 communication structures...........
Check these commonication Structure in SE11............I think u will get the required information........
2LIS_04_P_MATNR is Material View from PP/PP-PI ..........check this..........
http://help.sap.com/saphelp_nw70/helpdata/EN/88/7fc73c0c52085be10000000a114084/frameset.htm
Check this each field in SE11....from there try to find out these fields belongs to which table..........as I hav explained u in another thread..........
May be the extractor is using these fields from different tables.....
Regards,
Debjani........

How to do import of only table data without procedures and synonyms

Similar Messages

Maybe you are looking for