How to do mapping using badis?

Hi Experts,
Can any one tell me how to do mapping using badis. Ex : this is for in IF_DP_WTY_UI_FIELD_MAPPING~CLAIM_HEADER_DATA_IN
this is out - IF_DP_WTY_UI_FIELD_MAPPING~CLAIM_HEADER_DATA_OUT. any one have any idea how to use these methods in webdynpro.
Thanks,
kris.
Edited by: kissnas on Jan 5, 2011 7:39 AM

Hi,
I am not sure of what mapping here, however to call badi methods
you can use get badi to get badi ref and call badi to call corresponding methods if it is new badi or if it is old badi you can use class exit handler for getting ref and call the methods of badi implementaion using this ref..
it is same as calling any method of any class, only thing to make sure is badi is implemented

Similar Messages

ESS Leave Custom fields, how to update them using BADIs

Hi There,
We are trying to use custom fields provided in ESS leave application, and we want to update them using BADI. As these information is not available on the screen while requesting leave request.
I did look at PT_ABS_REQ BADI and seems i can use Post_Vio_BLOP .. but its unable to update table PTREQ_ATTABSDATA .
Can you please suggest what can be best approach here.
Thanks a lot.
Rgds,

Sudhir wrote:>
> I did look at PT_ABS_REQ BADI and seems i can use Post_Vio_BLOP .. but its unable to update table PTREQ_ATTABSDATA .
Did you look at using the Implict Enhancement Options available at the beginning & end of the POST_VIA_BLOP Method? Or even better, enhance the Class CL_PT_ARQ_REQ_EXIT & replace the IF_EX_PT_ABS_REQ~POST_VIA_BLOP Method with an Overwrite Exit?
~Suresh

Screen exit for VL01 in ECC 6.0 using badi's

Hi All,
I got a requirement to create a new tab in VL01 transaction where i need to create one field in ECC 6.0.
Can anyone tell me the complete procedure to create a new sub screen and adding it to the existing standard sap screen as a new tab in ECC 6.0 version.
kindly suggest me how to do this using badi's.

Dear Nicole,
a)SE18:
Definition name               ME_PROCESS_PO_CUST
b)SMOD:
Enhancement     MM06E005
EXIT_SAPMM06E_013
-> If you want to use it, use transaction CMOD to create a
project with Enhancement     MM06E005
Best Regards,
Ian Wong

Multiple use Badi implementation

Dear Experts,
I have created a custom BADI definition of multiple use type and one implementation for it n it is working fine but now i want to create multiple implementations for it.
But when im trying to use method of second implementation in my program its raising an error that this method is not defined.
Hope u understand my query.Plz explain me with an example that how to implement multiple use BADI's.
Thanx in advance.

Hi,
You can implement several BADIs based on the same definition if FILTER option or MULTIPLE USE option are active.
In this way you can have (implement) the same method does different actions according to the BADI where it's defined.
So you can use the FILTER to decide which method (BADI) has to work.
If the FILTER isn't active a definition of a BADI can use once, so it can implement only ones.
But if the flag MULTIPLY USE is active it can use the same BADI for several implematations.
In this case every BADIs'll works because there isn't a filter.
So you can implement several actions.
See this Weblogs,
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
See here:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/user/view/cs_msg/9494
http://www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
Regards,
Padmam.

How to implement wafer mapping using LabVIEW?

Hello LabVIEW Masters!
I am having an incoming project which includes controlling and gathering information from a PROBER. One of the difficulties I am having now is how to implement a WAFER MAP using LabVIEW. According to my customer requirements, the wafer element ranges from 6k to 23k. I guess doing all the element (one die = one led ctl/indicator) will be a hell of a task, especially on how to effectively manipulate each elements. Does anyone have better idea on how to this?
Please, I badly need your help..
Thanks and Regards,
Dennis DG
Solved!
Go to Solution.

Hi Dennis,
Is it okay if you send to me the working VI also?
No, it's not ok. I made that program for my customer...
As I am not too familiar in using intensity graph.
That's no reason to hand over programs for free...
My customer also request me that if the cursor hover on the wafer map, he wants the x,y corrdinates to be displayed.
I also have such a feature. Did you notice the little yellow cursor near the center of the wafer? One could easily change that to use a MouseMove event instead...
He also wants to select some elements in the wafer map and come up with the coordinate values to do some testing.
That's related to the cursor thing...
Some points:
- You have a customer that pays you. Why should I offer work for free?
- You can send me contact dates of your customer, I will make him an offer...
- When you take an job to provide software you should be able to code the software...
- The VI(s) are now some years old. I didn't code so well back those days and don't want to hand out those VIs as they are right now.
- I included some "license management" deep inside that program, I would have to remove this and spend time on testing afterwards...
- The VIs are based on the PROBER output format used by the customer. All the file handling has to be changed for/by you...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

[Enhancement in BW]: How to use BaDI : RSU5_SAPI_BADI

Hi Everybody,
Right now, could you kindly please tell me how to i use customer exit but using BADI, particularly for BADI : RSU5_SAPI_BADI.
I just wanna use the customer exit on variable (variable user-exit).
So far i've tried these steps (might you correct me/advise):
1. tcode : SE18
2. Enter the Badi Name : RSU5_SAPI_BADI
3. (Toolbar) enhancement implementation -> Create
4. ... (After that i don't know what i've to do ..)
Could you tell me step-by-step to make it ?
Such as what i should fill-in for Implementation Name and any parameter should i fill in there and how to debug it ???
Many-many thanks all for the attention.
Hopefully i can make it :).
Kind regards,
Niel.

Check out this link:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7</a>

How to reconcile procedure or function in a mapping using OMB Plus?

HI,
Could any one please explain, how to reconcile a procedure or function used in a mapping?
Thank you,
Regards,
Gowtham Sen.

Hi,
You can only reconcile Inbound (from Procedure to the mapping) :
OMBRECONCILE PROCEDURE \
'/[Project_name]/[Module_name]/[Procedure_name]
TO MAPPING '[Mapping_name]' \
OPERATOR '[for example name of a Post-Mapping Process in the mapping]' \
USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_ID')
Hope that will help.
Best Regards
Samy

I just started using fire fox and I cant figure out how to add a new folder to my bookmarks. Can anybody explain how in detail (I'm bad with computers so I need real detail) Please and thank you. :)

I just started using fire fox and I can't figure out how to add a new folder to my bookmarks.
Can anybody explain how in detail (I'm bad with computers so I need real detail)
Please and thank you. :)

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to determine the purchasing group using BADI BBP_PGRP_FIND

Hello Friends
We use SRM Server 5.5 (Classic scenario).
As you know that, purchasing group has the responsible product categories in PPOMA_BBP, when user creates the shopping cart to determine the purchasing group.
In our case, we should determine the purchasing group using other criteria.
MM side is OK to determine the purchasing group using specific criteria.
Because Material Master has the purch. Group information.
In case of SRM, we should develop the logic using BBP_PGRP_FIND BADI.
But Im not sure how to use this badi.
We want to determine the purchasing group based on the following logic.
If described shopping cart without product ID
Do Standard purchasing group determination logic.
Else
Assign the purch group from MARC- EKGRP (Purchasing Group)
Is it possible to determine above the logic?
If yes, Could you give me some information?
Thank you,
Best regards,
SH
Message was edited by:
So Hee Lee

Thank you for your answer.
I found the way to develop the our logic using BADI: bbp_pgrp_find.
But Im not sure the following logic is correct.
To differentiate described req. or product id req, We check the E_ITEM PRODUCT using BBP_PD_SC_GETDETAIL.
IF E_ITEM PRODUCT is blank, Read the category ID to find the purchasing group.
To find the purch. Group, we can use FM: BBP_OM_DETERMINE_RESP_PGRP.
Import parameter: IS_RESP_ITEM_DATA Category _ID
Export parameter: ES_PURCH_DATA
ELSE
CALL the customer function to read the R/3 purchasing group from MARC- EKGRP
Search the HRT5500-TABNR using purchasing group from R/3.
Search the HRP5500 OBJID using HRT5500-TABNR
Call the FM: BBP_OM_DETERMINE_RESP_PGRP
Import parameter: IS_RESP_ITEM_DATA PROC_GROUP OBJID
Export parameter: ES_PURCH_DATA
Thank you
Best Regards
SH

How to test ABAP mapping used in a Integration Process node

Hi,
anyone can suggest me how to debug an ABAP mapping used into a transformation node belonging to an Integration Process ?
Thanks.
Francesco

Hi, Francesco.
I've debugged ABAP Mapping with SXI_MAPPING_TEST transaction.
If you have creted a scenario including your ABAP Mapping, you only hace to put the correct sender/sender interface and receiver/receiver interface. You have to put some XML document as an input.
I wrote in my code the Break-point instruction an debugged the process without problems.
regards,
Francisco

How can u triger IDOCS wen ever vendor no. changes in XK02 Using BADI's

Hi all
           When ever i change the vendor no.. in XK02,the idoc have to be triggrer using BADI in ECC6.0 version.Pls Any one help me how to create BADI AND IDOC IN ECC6.0.I am new to both IDOCS and BADI.
Given badi name was -- VENDOR_ADD_DATA_BI .
           Where to u have add funtionality whether in BADI or in particulatr Tcode programe name(means Include programe name)
Pls guide me
Thanks

Hi,
I have done something similar but not the exact. My requirement was to send Customers and moreover I didn't make use of the BADI, instead I used events and change pointers.
What you can do is:
1. put the following code (or something similar) inside your BADI (make sure the BADI is fired only for XK02 and not for t.codes XK01, XK03,...)
This program RBDSECRE is same as T.code BD14. The variable w_vendor_number should match with your BADI parametes.
          SUBMIT RBDSECRE WITH SELLIFNR EQ w_vendor_number
                                          WITH MESTYP    EQ 'CREMAS'
                                          WITH LOGSYS    EQ w_logsys_name
                                          WITH nomsg        EQ 'X'
                                          AND RETURN.
2. create a distribution model for the logical systems and the idoc message type in BD64.
Hope this Helps,
Sumant.

How do you insert an image into a google map using a macbook?

I am trying to put images into a Google map using my MacBook, but cannot seem to find any help. How do I insert an image into my Google map using my MacBook?

Nothing complicated with your menu - very clear "ADD Image" but my menus are not as simple. Everytime I need to add an image I spend 5-10 minutes searching again. Wonder why so hard. I generally find Acrobat menus cryptic and unclear and I am big Adobe fan - use Illustrator, Photoshop, Dreamweaver, Premier, Fireworks etc - but Acrobat menus are like calculus in the dark.

About how to build dynamic maps using jdeveloper 10g and mapviewer

i follow the guidance (about how to build dynamic maps using jdeveloper 10g and oracle application server mapviewer) to write a jsp file,but error take palce ,i get information "Project: D:\jdev1012\jdev\mywork\WebMap\ViewController\ViewController.jpr
D:\jdev1012\jdev\mywork\WebMap\ViewController\public_html\WebMap.jsp
Error(12,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,190): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,102): cannot access class oracle.lbs.mapclient.taglib.MapViewerInitTag; file oracle\lbs\mapclient\taglib\MapViewerInitTag.class not found
Error(12,28): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(12,40): cannot access class oracle.lbs.mapclient.MapViewer; file oracle\lbs\mapclient\MapViewer.class not found
Error(13,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,198): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(13,106): cannot access class oracle.lbs.mapclient.taglib.MapViewerSetParamTag; file oracle\lbs\mapclient\taglib\MapViewerSetParamTag.class not found
Error(14,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,188): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(14,101): cannot access class oracle.lbs.mapclient.taglib.MapViewerRunTag; file oracle\lbs\mapclient\taglib\MapViewerRunTag.class not found
Error(15,37): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,200): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found
Error(15,107): cannot access class oracle.lbs.mapclient.taglib.MapViewerGetMapURLTag; file oracle\lbs\mapclient\taglib\MapViewerGetMapURLTag.class not found"
can you help?
greetings

I found a lot of information in document 133682.1 on metalink.
step by step example how to deploy a JSP business component application.

Need help on how to create the simple mapping using ORACLE DATA INTEGRATOR

Hi guys,
am new to learn odi.. please share me or steps how to develop the simple mapping using ODI...

Hi,
I am a newbie to Oracle Data Integrator as well. You should have a look here first; http://www.business-intelligence-quotient.com/?p=379
Try to play around with ODI and then come back if you have specific questions. You should better move to this ODI-forum; Data Integrator
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

How to read a variable within a VC code. I am using BADI based VC code.

How to read a variable within a VC code. I am using BADI based VC code.
Lets say I have a variable for a fiscal period that holds cumulative month.
If user enters 03/2014 in that variable, it will have month starting from Jan till March.
Within VC code I would like to read the last month which is
03/2014 and based on this month I would like to do some calculation on all the records using the last month.
Since VC code runs for one record at a time and there is no way I can store this value.
Is there a way to go about it....any suggestions would be of great help.
Thanks.

Any suggestions would be highly appreciated.
Thanks!

How to do mapping using badis?

Similar Messages

Maybe you are looking for