How to downgrade the target framework from 4.5 to 4.0?

Hello everyone,
I have a VisualStudio 2012/C++ project, which targets dotNet Framework 4.5. In fact the only reason I am using the Measurement Studio (also 2012) for this project is the Analysis library.
As soon as I installed the framework, MS2012, and added references for the assemblies I need the project started working. Everything was OK until it turned out I have to support customers
who are still running Windows XP.
dotNet 4.5 is not XP-compatible, therefore I would like to use the dotNet 4.0 Analisys.Enterprise assembly... hoping it will resolve the problem The only thing is: where to find it?
I will greatly appreciate comments and suggestions: both regarding whether the whole undertaking makes sense, and if it does - where to get the assembly. On the additional note: will it affect the licensing (I had one until was guided by NI people re how to create a exe.licx file)
Thank you in advance!
Mike

Hi Kevin,
before switching to the MS2013 I had a MS2008 license, which I used with Visual Studio 2008. As soon as we started using Visual Studio 2012 and Windows 7, we were unable to use that outdated version anymore, and "jumped over" to the MS2013.
Thank you,
Mike

Similar Messages

How to set the target directory from source filename using adaptor module.

Hi,
How im using a logical bypass scenario.I have to set the target directory using the sorce filename.There is no chance of using a Java UDF as my scenario does not have a Mapping(as it is a Bypass Scenario).The only option that i got is to use a Adaptor module.Can anyone help me this.
Thanks,
Bhargav

Hi,
See this link,
http://help.sap.com/saphelp_nw04/helpdata/en/e9/61e1407e858031e10000000a1550b0/content.htm
hope it helps.
Regards,
Akshay Jamgaonkar.
Reward points if find useful.

HT1222 how to downgrade the iphone from io7

how to downgrade the iphone from io7

Cannot be done. Downgrading is not an option.
What is the issue you think downgrading would address? Perhaps there are other approaches.
tt2

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How to enable the target Group option "Dispaly target Group" in WebUI

hello All,
I am Working on Market Role in CRM 7.0 here when we search for the segment from the Marketing Work center and select any one segment from the search i.e profile set .After that when we click on the graphical Modeler button on the top . That takes to a view where in we can see icons with target group on the right top in the view when we right click on the icon we get options eg: count,export to file etc here we dont have an option call "Display Target Group" but this option is avaiable in the GUI . How can we get this option on to the webUI can any one help me out in this regards.
Thanks in advace.
Regards,
Kiran Posanapalli.

I don't think you can get a button like this. You are not supposed to view the content of the target group from within the graphical modeler. You have to see this from the traditional CRM WebClient user interface. There you will see the members of the target group when clicking on the target group name.
From the graphical modeler the only thing you can do is to right click the target group and export it to a file.

How to specify the target name while deploying a code in OSB-- Plz Help

Hi all,
Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
Regards
Prabhu

Hi Prabhu,
There are three kind of server architecture possible for OSB -
1. Single server - Everything gets deployed on Admin server itself
2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
You may refer-
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
Regards,
Anuj

How to make the TARGET of clone stamp 2 simultaneous layers?

Does anyone know how to make the TARGET of the clone stamp, multiple simultaneous layers? Or maybe more accurately, how to clone stamp the top layer and have the layer underneath doing the exact same cloning simultaneously. Or maybe a workaround? I've tried linking the layers, and multiple layer selection with no joy.
Here is what I'm trying to do. I'm duplicating a layer, then applying LucisArt to one of the layers to greatly exaggerate local contrast. Though I'm not using LucisArt as the final, I want to use it to assist in smoothing blotchy skies, banding, and finding hidden camera sensor dust spots.
I want to clone stamp on the LucisArt layer so I can watch my progress, but also have the underlying layer doing the exact clone stamping at the same time. Thanks ... Aaron

Thanks everyone.
Dennis, You are correct. I know how to selectively apply the LucisArt filter, that's not what I'm looking for. I want my end result to have NO LucisArt effect at all. I'm trying to use the LucisArt layer to drastically exaggerate flaws such as camera sensor dust, AND I want to correct these flaws on the LucisArt layer where they are obvious. The LucisArt layer is only for reference. But the trick is to get CS3 to do to the non LucisArt layer, exactly what I did to the LucisArt layer.
So imagine I have this otherwise nice photo, but the photographer (this happened) had an amazingly dirty sensor. Half of the dust spots I can hardly see, but the client wants it super clean. So I duplicate the layer so I have two exactly the same. I then apply a strong LucisArt filter the top layer which reveals all the spots including many I couldn't see on the original layer. I'd like to fix all these spots with the clone stamp tool on the LucisArt layer where I can see them easily, then toss that layer. The original below would have all those spots fixed, but sampled from it's own layer and stamped to it's own layer.
As it is, I can click the LucisArt layer on, place my finger on the spot, then turn that layer off and hopefully see the spot and remove it from the layer underneath. Very tedious indeed.
... Aaron

How to revert the maintainence image from 2.1(5) to 2.1(3) on NAM2 Module.

Hi,
Could some one please help me with the procedure or document on how to revert the maintainence image from 2.1(5) to 2.1(3) on NAM2 Module/
As I am trying to upgrade the 4.0 software version on the nam.
Thanks in advance.
Regards
Alex.

I follwed this note only (Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite 11i [ID 290807.1]) to upgrade my Jre -1.6.0_23 version .Use the same steps to downgrade to 1.6.0_20 (i.e. download the correct plug-in, issue "txkSetPlugin.sh jversion" with the desired version, ..etc).
I given it to application team for testing they come back with some issues telling that some application and users unable to access so requesting to downgrade the JRE to 1.6.0_20 version.What issues? Have you considered upgrading to 1.6.0_24?
Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23
http://blogs.oracle.com/stevenChan/2010/12/mismanaged_session_cookie_issue_fixed_ebs.html
Is it possible to downgrade ? Try the above, or restore from a backup (if you have one) which is taken before upgrading to 1.6.0_23
Thanks,
Hussein

May I know how to downgrade the iOS version to some older one?

Pls give me a solution to this (how to downgrade the iOS version to some older one?) this will be a great help and i am seeing videos and support columns from a variety of popular websites to get some knowledge about this but it all ends up failing and a waste of time. Any professionals there? To help me . Pls

Sorry, downgrading is not supported.

HT201272 How to reinstall the previous version from new vesion

How to reinstall the previous vesion from new version?

Previous version of what ? If you mean iOS then downgrading it is not supported.
If you mean a particular app then have got the previous version of it anywhere ? If you have then you can delete the current version of it from your iPhone and computer's iTunes, then add the old version to your computer's iTunes via File > Add To Library and then sync it to your iPhone.

How to get the query values from the url in a servlet and pass them to jsp

ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

ok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
%

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

How to downgrade the target framework from 4.5 to 4.0?

Similar Messages

Maybe you are looking for