How to set the target directory from source filename using adaptor module.

Hi,
How im using a logical bypass scenario.I have to set the target directory using the sorce filename.There is no chance of using a Java UDF as my scenario does not have a Mapping(as it is a Bypass Scenario).The only option that i got is to use a Adaptor module.Can anyone help me this.
Thanks,
Bhargav

Hi,
See this link,
http://help.sap.com/saphelp_nw04/helpdata/en/e9/61e1407e858031e10000000a1550b0/content.htm
hope it helps.
Regards,
Akshay Jamgaonkar.
Reward points if find useful.

Similar Messages

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

Determine Target directory from Source file names with out mapping

Hi All,
I have a requirement to determine the Target Directories from the Source file names.
File Sender Adapter - XI - File Receiver Adapter
In this scenario I am not doing any mapping. Source File directory contain 3 files. These file should go to 3 directories in the Target Server.
Please help me how can meet this requirement
Thanks in advance
Kevin

Hi Kevin,
if you can separate the files by name. have 3 sender communication channels each picking up one of the files (you do this by making the regex in the file name mutually exclusive) and then send them all to the target system using the same comm. channel.
regards,
Horia

How to set the working directory for reports in linux

Hi All,
Can you anyone help me to set the working directory for oracle application server 10g reports? I am using RHEL4 and AS10g. Actually i want to run my reports from my define
working directory. How can I do this?
Thanks in advance
Arif

Hi,
your rep_srv.conf should look like something like
+<?xml version = '1.0' encoding = 'ISO-8859-1'?>+
+<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">+
+<server version="10.1.2.0.2">+
++
++
+<cache class="oracle.reports.cache.RWCache">+
+<property name="cacheSize" value="50"/>+
++
++
++
+</cache>+
+<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="3" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xmx512M -Xss512K">+
++
++
++
+</engine>+
+...+
some more definitions
+..+
++
+<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>+
+<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>+
+<pluginParam name="textpds" type="file">textpds.conf</pluginParam>+
*<environment id="APP1">*
*+<envVariable name="REPORTS_PATH" value="/application1/reports"/>+*
*+</environment>+*
*+<environment id="APP2">+*
*+<envVariable name="REPORTS_PATH" value="/application2/reports"/>+*
+</environment>+
+</server>+
The environment ids you can choose yourself and you have to put them in there yourself too (here I put two environments for two different applications "1" and "2").
If you call a report from Forms, then you have to code something like
ADD_PARAMETER(p_list,'ENVID',TEXT_PARAMETER,'APP1');
Details depend on how you call your reports, my example is for using a parameter list and calling a report out of application1
Hope that helps.
Volker

How to set the target property of hyperlink through formula

Hi guyz,
I have a problem in setting the target property of hyperlink field. I'm using CR XI R2 with asp.net.
I want to set the target property of hyperlink as one of the frame on my webform. how can i do it through formula in crystal report.
I want to set it through CR because i don't have any way to identify the link fields uniquely. these link fields are generated dynamically from data base. I have some other links on my webform. If i try to get all links through javascript and change the target property it may effect some other functionalities, so i'm avoiding using javascript to set the target property of hyperlinks.
your help will be highly appreciated.
Thanks in advance
Deepak

You may want to look at the HyperlinkTarget property of the CrystalReportViewer. If you want all hyperlinks in the report to go to that frame, it should work for you.

How to set the HOME link from two frame jsp page to no frame main page?

Hi all,
i have one main jsp page named as main.jsp.
From the main.jsp, i can click the button and link to the twoFrame.jsp.
This twoFrame.jsp have another two different jsp inside the frame called Aframe.jsp and Bframe.jsp.
i try to put HOME in the Aframe.jsp(one of the page inside twoFrame.jsp) but only the Aframe.jsp manage to link to main.jsp but the Bframe still there.
My question is: How to set the HOME link button from this twoFrame.jsp to the main.jsp? what i want is from twoFrame.jsp(two frame) to main.jsp(no frame).
rgds,
Bryan523

No offense, but this is basic HTML. You shuold look into learning HTML before getting too deep into JSP. Try this: http://www.w3schools.com/html/default.asp
But as a more specific answer, you have to set a target for the link to the _parent of your frame:
<a href="main.jsp" target="_parent">Home</a>

Problem in setting the target directory in communication channel

hi...
my idoc 've been send successfully from the sender system and it also reached the receiver system. i conform it by checking the inbounds in IDX5.
but it is not generating the xml file in the target directory.
plz help me...

Hi,
Check the status of the receiver communication channel in RWB
Configure Your Receiver File Channel as Following
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
File to File scenario:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
Regards
Seshagiri

How to set the initial directory

Using the FileChooser in JavaFX 2.0. How do you correctly set the initial directory?
In Swing you would do the following:
JFileChooser Choose = new JFileChooser();
Choose.setCurrentDirectory(new File("."));But in JavaFX:
Choose.setInitialDirectory(new File("."));does not work and causes JavaFX to bomb out when this code is triggered.
Edited by: 863626 on 30-Oct-2011 05:30

javafx.stage.FileChooser choose = newjavafx.stage.FileChooser();
File d = new File(getClass().getResource(".").getFile());
choose.setInitialDirectory(d);

How to set the value of process variables/payload using a managed bean?

Hello,
Someone can give me an example about how to set the values of a process payload in a managed bean?
thank you!

Try this:
jsf page:
<af:selectOneChoice label="Select Suburb"
requiredMessageDetail="Select a suburb"
valueChangeListener="#{selectOneChoiceBean.onValueChanged}"
validator="#{selectOneChoiceBean.validate}"
unselectedLabel="None" autoSubmit="true"
binding="#{selectOneChoiceBean.selectOneChoice}"
value="#{selectOneChoiceBean.value}">
<f:selectItems value="#{selectOneChoiceBean.selectionList}"/>
</af:selectOneChoice>
backing bean:
public class SelectChoiceBean {
private List<SelectItem> selectionList;
private String value = "B";
private RichSelectOneChoice selectOneChoice;
public SelectChoiceBean() {
initSelectionList();
public void setSelectionList(List<SelectItem> selectionList) {
this.selectionList = selectionList;
public List<SelectItem> getSelectionList() {
return selectionList;
public void onValueChanged(ValueChangeEvent valueChangeEvent) {
System.out.println(valueChangeEvent.getNewValue());
// Add event code here...
public void validate(FacesContext facesContext, UIComponent uIComponent,
Object object) {
// Add event code here...
private void initSelectionList() {
selectionList = new ArrayList<SelectItem>();
selectionList.add(new SelectItem("A", "A label"));
selectionList.add(new SelectItem("B", "B label"));
selectionList.add(new SelectItem("C", "C label"));
public void setValue(String value) {
this.value = value;
public String getValue() {
return value;
public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
this.selectOneChoice = selectOneChoice;
public RichSelectOneChoice getSelectOneChoice() {
return selectOneChoice;
}

How to set the defualt directory of where to look for a file to read

I am reading a file from a servlet. I wanted to see where Tomcat would write the file if I didn't specify a path. The results surprised me. It wrote the file in: "C:\Documents and Settings\myusername\Start Menu\Programs\Apache Tomcat 4.1". So I looked through server.xml to see if perhaps this path was set there but didn't find anything. I right clicked on the "Start Tomcat" target to see its properties and there it was. There was a field "Start in:" and it contained the aforementioned path. I changed it to what I wanted but there has to be a way to set this in server.xml. How do I do this. my guess would be something like :
"<Context path="" docBase="c:/theDefaultDirectory" debug="0"/>", but this didn't work. Any light on this subject would GREATLY be appreciatted,
silas

Well, actually, it opens file where the process is currently located on your fileSystem. since you seems to be using windows, the process is started in the directory written in the "Starts In" field. Now you could use the command line (the ugly MSDOS like window), go to some directory and starts the tomcat process from there, and the files would be created in that place.
The docBase tells where tomcat should look when looking for pages (html jsp, etc...). If you want to use it, you can still refers to it as :
new File (yourServlet.getServletConfig().getContextPath("/myfile.txt"))Another track to check would be to look in the System.getProperties. There has to be some property that gives the current JVM path, try to change it to the location you'd like it to be and see if it conforms to how you'd like to see it works.
Still, remember that you can have multiple Context in your servlet container, so there's no reason for tomcat to set the JVM default path to the docBase from one or another (File is a global JVM utility, not a J2EE only feature !!).

Set target fileds from source fields using JDBC lookUp

hello :
advance thanks for reading below and i am new to java
how to to set the two taget fileds T1 and T2 from source field S1 using jdbc look up .Here is the code and its giving syntax error . set T1 to approver1 and T2 to approver2
I copied the code from blog 2219
How to map to two target fileds ??
Is something wrong with the query ?
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
>>>>>>>>I defined Argument a(i am passing S1) Result result
>>>Here is the code :
//write your code here
String Query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
// Build the Query String
Query = "Select (approver1,approver2) from Emp where loginid = ' " + a[0] + " ' '';
try{
//Determine a channel, as created in the Configuration
channel = LookupService.getChannel("SQL99","jdbc_cc1");
//Get a system accessor for the channel. As the call is being made to an DB, an //DatabaseAccessor is obtained.
accessor = LookupService.getDataBaseAccessor(channel);
//Execute Query and get the values in resultset
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("(approver1"));
//result.addValue((String)rowMap.get("approver2"));
catch(Exception ex){
result.addValue(ex.getMessage())
finally{
try{
if (accessor!=null) accessor.close();
catch(Exception e){
result.addValue(e.getMessage())
thankyou sdn:

hi kumar,
every statment in java should end with a semicolon... and 2 catch statments in the code given in blog(that you mentioned) are with missing semicolons at the end of the statments... just include semicolons at the end of these 2 catch staments and your code should work properly without any syntax error...
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!=null) accessor.close();
catch(Exception e){
result.addValue(e.getMessage());
Regards,
JP

How to change the default directory from within SQL*Plus ?

Hello,
I want to change the default directory directly from within SQL*Plus to be able to launch my command files with simple instructions like :
@my_command.sql
If I haven't launched SQL*Plus from the directory containing the file my_command.sql, how do I change the default directory to the directory of my command files ?
I've searched through the Oracle documentation, there's no SET DEFAULTDIR or something like that. When I do a SHOW ALL, there's no variable containing the default directory.
If you have an idea...
regards,
Jérôme.

Hi JÃ©rÃ´me (Jé²´me ?),
You cannot directly do that, but you can use @@ instead of @ to run subscripts in the same directory as the superscript
# head /tmp/tl30/xxx/[xyz].sql
==> /tmp/tl30/xxx/x.sql <==
prompt call y
@y
prompt call z
@@z
quit
==> /tmp/tl30/xxx/y.sql <==
prompt i am in y
==> /tmp/tl30/xxx/z.sql <==
prompt i am in z
# pwd
/root
# sqlplus -s scott/tiger@lsc62 @/tmp/tl30/xxx/x.sql
call y
SP2-0310: Datei "y.sql" konnte nicht geÃ¶ffnet werden
call z
i am in zKind regards
Laurent Schneider
OCM DBA

How to set the deployment directory ?

Hi all,
I am using Sun One Studio 3.0 with iWS6.0.
For every new application that I write, compile and execute,
it is getting deployed to the same
directory.
Because Sun One Studio is always using the same directory,
for every application I have
to manually delete the deployment directory.
Is there any way to set different deployment
directory for every new application that I write ?
If yes, how to do this ?
Thanks
Swap

I dont have the product installed, so I cannot try it right now. But I think the context root is part of the directory name in which the application is deployed. By default the context root is empty. If you change that, your application would be deployed in a different directory. To change context root, right click on WEB-INF node, and select "Properties" from the menu.
Alternatively, you could try changing the directory name by right-clicking on the web.xml node under WEB-INF. You should see an iWS tab on the property sheet, where you could enter a directory name.

How to get the \filter directory from registry (or other) during installation of the plugin

Hello
I made a script to install the plugin because it needs some libraries to be installed as well, but during the installation, the filter directory isn't defined (it isn't the same for each platform or language)
for example my filter folder is :
E:\Program_Files\Photoshop CS2\Modules externes\Filtres
how do i get this filter directory from registry (or with another way)
thanks a lot
Jeff

sorry i made a little mistake (didn't poste the updated version of my code)
here is the right code:
[Code]
var
maxnb8bf : Integer;
maxDirectory:        String;
nb8bf : Integer;
PreviousDirectory:        String;
procedure ProcessDirectory (RootDir: String; Progress: Boolean);
var
NewRoot:        String;
FilePath:        String;
FindRec:        TFindRec;
n1 : Integer;
n2 : Integer;
begin
NewRoot := AddBackSlash (RootDir);
if FindFirst (NewRoot + '*', FindRec) then
begin
try
repeat
if (FindRec.Name <> '.') AND (FindRec.Name <> '..') then
begin
FilePath := NewRoot + FindRec.Name;
if FindRec.Attributes AND FILE_ATTRIBUTE_DIRECTORY > 0 then
ProcessDirectory (FilePath, Progress)
else
begin
        if (NewRoot <> PreviousDirectory) THEN
        begin;
           if (maxnb8bf < nb8bf) THEN
           begin;
               maxnb8bf := nb8bf;
               maxDirectory := PreviousDirectory;
           end;
           nb8bf := 0;
        end;
        n1 := Pos('.8bf', FilePath);
        n2 := Pos('.8BF', FilePath);
        if ((n1 > 0) or (n2 > 0)) THEN
        begin;
           nb8bf := nb8bf + 1;
        end;
        PreviousDirectory := NewRoot;
end;
end;
until NOT FindNext (FindRec);
finally
FindClose(FindRec);
end;
end;
end;
function InitializeSetup(): Boolean;
var
V: string;
begin
if RegQueryStringValue(HKLM, 'SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\Photoshop.exe', 'Path', V) then
    MsgBox('Value is "' + V + '"', mbInformation, MB_OK);
Result := TRUE;
   maxDirectory := '';
   nb8bf := 0;
   PreviousDirectory := '';
   maxnb8bf := 0;
   ProcessDirectory (V, true);
   //if (maxDirectory <> '') THEN
   // begin;
   //      MsgBox('Value is "' + maxDirectory + '"', mbInformation, MB_OK);
   // end;
end;
function NewTargetDir(Param: String): String;
begin
Result := maxDirectory;
end;
Regards

How to set the ODBC driver from Micorosft ODBC manager in vista 64bit

Dear Sir/Madam
I just installed Vista ultimate (64 bit) on my computer.
After that, I downloaded and installed Oracle Database 10g Client Release 2 (10.2.0.3) from http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
Set up the network config from net configuration assistant is fine (tnsnames.ora).
When I want to set up the system ODBC from Microsoft ODBC manager.
I can't found oracle driver from Microsoft ODBC manager (only Sql Server driver is existing ).
Why? and how to found it out?
Thanks
Francis SZE

Database 10g Client Release 2 (10.2.0.3) from
http://www.oracle.com/technology/software/products/da
abase/oracle10g/htdocs/10203vista.htmlWhich means you will be using the 32-bit environment on top of the x64 based os (WoW64). Have you verified that the Database product is certified for Vista "x64" editions?
http://support.microsoft.com/kb/896456/en-us
I can't found oracle driver from Microsoft ODBC
manager (only Sql Server driver is existing ).
Why? and how to found it out?You are likely looking in the wrong place. DSNs with 32-bit drivers are managed through odbc admin tool in %systemroot%\syswow64\.

How to set the target directory from source filename using adaptor module.

Similar Messages

Maybe you are looking for