How to download PR Header Note/Text?
Hi
How to download PR Header Note/Text
Vijay
1) Go to Transaction Code : SE37
2) In the Function Module field, enter READ_TEXT & Execute
3) Please enter details as follows in blank screens
CLIENT : Put your client no here
ID : B01
LANGUAGE : EN
NAME : You put here "Text name" which you will get by clicking on Goto Header in Long text for Line.
OBJECT : Put "EBAN" here
ARCHIVE_HANDLE & LOCAL_CAT : keep blank
& the execute.
Regards
Bhavesh Mistry
Similar Messages
-
How to download and upload long text for project, WBS , Network,
Hi all,
I have two isssues.
1) I am extracting Projects, WBS , Network , Network activity and network activity element from a SAP 4.7 system using bapi's
BAPI_PROJECTDEF_GETDETAIL
BAPI_PROJECT_GETINFO
BAPI_NETWORK_GETINFO
BAPI_BUS2054_GETDATA
I am able to get all the details except long text. I want to know how do i extract the long text other than getting it manually by using select_text and Read_text Function module, is there any bapi to achieve this.
The reason why i am not using Function modules Read_text and Write_text is, object name( TDNAME ) value stored in STXH table for project, wbs and network are the project, wbs and network itself so i dont have any issues with this but the TDname value for activity and activity element are completely different ( Routing number and counter is stored respectively ) which i am not getting as the part of the bapi(BAPI_NETWORK_GETINFO) output.
2) I have to upload the extracted Project and it sub object data to ECC 6.0 system , i am able to achieve this by using BAPI's BAPI_PROJECTDET_CREATE, BAPI_PROJECT_MAINTAIN and BAPI_NETWORK_MAINTAIN. I am not able to load the longtext for the same, is there any way to load the long text .
All help will be greatly appreciated and rewarded.
Thanks & Regards,
Rajanidhi Rajasekeran.I don't think there is any BAPI to do it.
We are doing it by read_text & edit_text . required fields for text name can be fetched by following select
if not e_activity[] is initial.
select aaufnr aaufpl baplzl bobjnr b~vornr
into corresponding fields of table t_longtext
from afko
as a
left join afvc
as b
on aaufpl = baufpl
for all entries in e_activity
where a~aufnr = e_activity-network
and a~aufnr is not null.
endif.
txtname = wa_longtext-objnr.
replace c_nv in txtname with sy-mandt. -
PR HEADER NOTE TEXT TO RFQ HEADER NOTE TEXT
Hello all
We are maintaining the PR Header Note & we are creating the RFQ with reference to the PR , we are maintaing the PR Header note , but it is not getting copy in RFQ Header note
Kindly suggest
Thanks in advance
Regards,
Rajeshhello
Thanks for reply
After selecting the Header note in RFQ under Copying rules for header text & Selecting the Header note only text linkage is allow is RFQ
whether i have to make new entry as PR
No entry of PR availbale in for selection
Please suggest
regards
Rajesh Dalal -
How to download data into a text file format ?
Hi, all.
My situation now is: I have a report pogram which can retrieve data from database, and I would like to export or download those data to outside as a text file (.txt) in my local computer.
So, does anyone know how to do it? i mean my report coding should add on or enhance with what coding in order to do like that.
Thanks in advance.Hi,
Use GUI_DOWNLOAD Function module.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = 'FILEPATH'*
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X' (Field separator )
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
IMPORTING
FILELENGTH =
tables
data_tab = t_customer ( give internal tablename )
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22 .
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC -
Greetings,
If an app has been downloaded before even with an account other than the one I am signed in with, it shows the cloud icon and asks me for the password of the other account.
How do I download it with the account I am currently logged in with?
Thanks"I'm using the one on the computer, not the device."
Well I said this is happening on an iPad. Reread what is happening from the beginning of the thread, and tell me if the instructions are correct for the iPad. Are you prompted for passwords from a different account that previously downloaded the app on the iPad?
Again
The app is Google Search.
It is free.
(I am always promoted for passwords for both free and paid apps.)
The device is an iPad. That is why I posted this is the iPad discussion.
I am logged in with my account, let's call it A. It shows account A next to Apple ID in the lower left of the Featured page.
When I search for Google Search, and click the cloud download icon next next to the Google Search app, it prompts me for the password to a different account. Let's call it B.
In the app store it shows a cloud download icon next to every app that has ever been downloaded on this iPad, regardless of whether it is account A, B, C, etc
Have you tried logging in with a different account to test this? -
How to download Documentaion of a Text file to a Report
Hi Friends,
Please guide me on this,
I want to download Documentation of a Report into a text file,
Problem is how to get/capture the Documentaion.
Regards,
Sowjanya
Edited by: sowjanya s on Dec 31, 2008 12:35 PMhi,
DOKHL - Documentation: Headers
DOKTL - Documentation - text lines
DOKIL - Index for Documentation Table DOKH
Use the FM:
SRTU1_GET_REPORT_DOCUMENTATION
Pass the language.
And in the tables IT_REPORTS pass the report name. -
MAIL on TIGER OS 10.4 Only prints Header .NOT text of message
Before anyone comments that this post should be on the MAIL forum - let me state that I did try the MAIL forum -- and as usual got ZERO responses --
Has anyone experienced the following in MAIL on TIGER - latest version ::
If I key [type] cmd. P on an email -- the only part that prints out the first "try" is the headers -- it does not NOT print the message. STRANGE just started doing this behavior..
If I key cmd. P a second time it DOES NOT seem to work , most of the time.
If I use the Print command under the File pulldown menu --- it seems to work OK
This does not happen in Safari.
What is going on here ??????
Safari work just fine.
Thanks,
Samuel.In your mail program, you'll need to first click in the lower window where the text of the message is, to activate it; then using Cmd/P should print the contents of that window.
-
Appleworks database prints only header, not text
Appleworks 6.2.9, Mac OS 10.4.3, HP 6110 all-in-one printer with recent reinstall of driver (many other problems, now more or less cured). I have an oft-used database document (a wine list) which will print correctly in its original format, but when I change the page setup it prints only the header and not the database. Same in Preview although the whole page shows in the window. Tried saving the document as AW 5 and reopening -- nada. Ideas? Thanks.
G4 iMac Mac OS X (10.4.3) HP 6110 all-in-one printerWelcome to Apple Discussions Michael
The easiest & best first step in troubleshooting is to delete the AppleWorks preferences. See my user tip, AppleWorks has stopped working correctly, for more information.
Do you have another printer you can try? HP printers are notorious for not "playing nice" with AppleWorks (& they don't do very well with Pages, either). Make sure you have the newest HP driver & that you use Disk Utility to repair permissions after installing any software or update that asks for your admin password.
A workaround that is often successful is to save the document as a PDF & then print the PDF.
Peggy -
How to make portlet header not clickable?
Hi,
I published a page as a portlet and placed it on another page. I enabled the region where the portlet resides in to show the portlet header. Now I found out that if I click the portlet header, the orignial page of the portlet is shown. I don't want to show it to my users, but do want to keep the portlet header and make it non-clickable. Is there a way to do that? Any help will be appreciated.
I'm using version 10g.
Thanks,
YaxuHi,
You have to disable the "Show Details Link on Portlet Header" box for the region where you display the page as portlet.
It's at the end of the "Edit Region" Main page where you can set which links you want to display.
Alex -
How To download a idoc to a text file
Hi Gurus,
Can anyone let me know how to download idoc to a text file (Local).
Thanks in advance
B S B.Hi,
Check the code below...
Reads an existing Idoc and dispays the contents in a spreadsheet format
REPORT Z_DISPLAY_IDOC_AND_DATA line-size 275.
* This tool reads an existing Idoc and dispays the contents in a *
* spreadsheet format. The spreadsheet (MS-EXCEL) will be automatically *
* created if D_EXCEL = 'X'. *
data: idoc_control like EDIDC,
NUMBER_OF_DATA_RECORDS like sy-dbcnt,
NUMBER_OF_STATUS_RECORDS like sy-dbcnt,
INT_EDIDS like edids occurs 0 with header line,
INT_EDIDD like edidd occurs 0 with header line.
TYPE-POOLS : LEDID.
data: STRUCT_TYPE TYPE LEDID_STRUCT_TYPE ,
IDOC_STRUCT TYPE LEDID_T_IDOC_STRUCT,
SEGMENTS TYPE LEDID_T_SEGMENT,
SEGMENT_STRUCT TYPE LEDID_T_SEGMENT_STRUCT,
excel_tab(2000) occurs 0 with header line.
parameter: DOCNUM like edidc-docnum obligatory, ""Idoc Number
sap_rel like SY-SAPRL default SY-SAPRL obligatory,
pi_ver like EDI_VERREC-VERSION default '3' obligatory,
d_excel as checkbox default 'X'. ""Download ?
start-of-selection.
perform read_idoc.
perform process_idoc.
if d_excel = 'X'.
perform download_to_excel.
endif.
end-of-selection.
FORM read_idoc.
CALL FUNCTION 'IDOC_READ_COMPLETELY'
EXPORTING
DOCUMENT_NUMBER = docnum
IMPORTING
IDOC_CONTROL = idoc_control
NUMBER_OF_DATA_RECORDS = NUMBER_OF_DATA_RECORDS
NUMBER_OF_STATUS_RECORDS = NUMBER_OF_STATUS_RECORDS
TABLES
INT_EDIDS = INT_EDIDS
INT_EDIDD = INT_EDIDD
EXCEPTIONS
DOCUMENT_NOT_EXIST = 1
DOCUMENT_NUMBER_INVALID = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "" read_idoc
FORM process_idoc.
perform read_idoc_structure.
perform display_data_records.
ENDFORM. "" process_idoc
FORM display_data_records.
data: PE_seg_HEADER like EDI_SAPI01,
segname like EDI_IAPI12-SEGMENTTYP,
prev_segname like EDI_IAPI12-SEGMENTTYP value ' ',
pt_fields2 like EDI_IAPI12 occurs 0 with header line,
PT_FVALUES2 like EDI_IAPI14 occurs 0 with header line,
byte_first type i,
byte_last type i,
field_val(50),
tmp_str(15),
tmp_str3(15),
seg_repeats type i value 0,
tmp_str2(15),
tab_cr(1) type x value '09',
tot_ctr type i value 0,
ctr type i value 0,
msg(40) type c.
data: IDOC_STRUCT_wa TYPE LEDID_IDOC_STRUCT.
sort int_edidd by segnum.
describe table int_edidd lines tot_ctr.
loop at int_edidd.
move int_edidd-segnam to segname.
clear msg.
concatenate 'Reading segment ' segname
into msg separated by space.
if tot_ctr <> 0.
ctr = ( 100 * sy-tabix ) / tot_ctr.
endif.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = ctr
TEXT = msg.
add 1 to seg_repeats.
clear tmp_str2.
if int_edidd-segnam <> prev_segname.
seg_repeats = 1.
clear: pe_seg_header, pt_fields2, pt_fvalues2.
refresh: pt_fields2, pt_fvalues2.
CALL FUNCTION 'SEGMENT_READ_COMPLETE'
EXPORTING
PI_SEGTYP = segname
PI_RELEASE = sap_rel
PI_VERSION = pi_ver
IMPORTING
PE_HEADER = pe_seg_header
TABLES
PT_FIELDS = pt_fields2
PT_FVALUES = pt_fvalues2
EXCEPTIONS
SEGMENT_UNKNOWN = 1
SEGMENT_STRUCTURE_UNKNOWN = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
prev_segname = int_edidd-segnam.
endif.
read table idoc_struct into idoc_struct_wa with key
segment_type = int_edidd-segnam.
if sy-subrc = 0.
IF IDOC_STRUCT_WA-SYNTAX_ATTRIB-MUSTFL = 'X'.
TMP_STR = 'Mandatory'. ""Mandatory
ELSE.
TMP_STR = 'Optional'. ""Optional
ENDIF.
if IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-QUALIFIER = 'X'.
tmp_str3 = 'Qualified'.
else.
tmp_str3 = 'Non-Qualified'.
endif.
shift IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX
left deleting leading '0'.
move seg_repeats to tmp_str2.
condense: IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX, tmp_str2.
concatenate tmp_str2 'of' IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX
into tmp_str2 separated by space.
write :/ IDOC_STRUCT_wa-SEGMENT_TYPE,
tmp_str,
TMP_STR3,
tmp_str2,
IDOC_STRUCT_wa-SYNTAX_ATTRIB-HLEVEL,
IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-plast,
IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-DESCRP.
if d_excel = 'X'.
concatenate 'Segment Name' tab_cr
'Mand / Opt ' tab_cr
'Qual / non-Qual' tab_cr
'Seq of Max' tab_cr
'Level' tab_cr
'Owner' tab_cr
'Description'
into excel_tab.
append excel_tab.
concatenate IDOC_STRUCT_wa-SEGMENT_TYPE tab_cr
tmp_str tab_cr
TMP_STR3 tab_cr
tmp_str2 tab_cr
IDOC_STRUCT_wa-SYNTAX_ATTRIB-HLEVEL tab_cr
IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-plast tab_cr
IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-DESCRP
into excel_tab.
append excel_tab.
concatenate tab_cr
'Field Nma' tab_cr
'Type' tab_cr
'Length' tab_cr
'Byte From' tab_cr
'Byte To' tab_cr
'Description' tab_cr
'Value' tab_cr
'Qualifier Meaning'
into excel_tab.
append excel_tab.
endif.
endif.
sort pt_fields2 by field_pos.
byte_first = 0.
loop at pt_fields2.
clear: field_val.
byte_last = pt_fields2-EXTLEN.
write int_edidd-sdata+byte_first(byte_last) to
field_val left-justified.
shift pt_fields2-EXTLEN left deleting leading '0'.
shift pt_fields2-byte_first left deleting leading '0'.
shift pt_fields2-byte_last left deleting leading '0'.
write:/ ' ', pt_fields2-fieldname,
pt_fields2-datatype,
pt_fields2-EXTLEN,
pt_fields2-byte_first ,
pt_fields2-byte_last,
pt_fields2-descrp,
field_val.
read table pt_fvalues2 with key fieldname = pt_fields2-fieldname
fldvalue_l = field_val.
add byte_last to byte_first.
if sy-subrc = 0.
write : pt_fvalues2-descrp.
else.
clear pt_fvalues2-descrp.
endif.
if d_excel = 'X'.
concatenate tab_cr pt_fields2-fieldname tab_cr
pt_fields2-datatype tab_cr
pt_fields2-EXTLEN tab_cr
pt_fields2-byte_first tab_cr
pt_fields2-byte_last tab_cr
pt_fields2-descrp tab_cr
field_val tab_cr
pt_fvalues2-descrp
into excel_tab.
append excel_tab.
endif.
endloop.
endloop.
ENDFORM. "" display_data_records
FORM read_idoc_structure.
data: idoctype type LEDID_IDOCTYPE.
if not idoc_control-cimtyp is initial.
STRUCT_TYPE = 'E'. ""Extended
idoctype = idoc_control-cimtyp.
else.
STRUCT_TYPE = 'B'. ""Basic
idoctype = idoc_control-idoctp.
endif.
CALL FUNCTION 'IDOC_TYPE_COMPLETE_READ'
EXPORTING
RELEASE = sap_rel
STRUCT_TYPE = STRUCT_TYPE
IDOCTYPE = idoctype
VERSION = pi_ver
* IMPORTING
* IDOC_TYPE = idoctype
TABLES
IDOC_STRUCT = idoc_struct
SEGMENTS = segments
SEGMENT_STRUCT = segment_struct
EXCEPTIONS
IDOCTYPE_UNKNOWN = 1
IDOCSTRUCT_UNKNOWN = 2
SEGMENT_DATA_MISSING = 3
ILLEGAL_STRUCT_TYPE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "" read_idoc_structure
FORM download_to_excel.
data: name like RLGRAP-FILENAME.
shift docnum left deleting leading '0'.
concatenate docnum '-' idoc_control-idoctp '.xls'
into name.
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
DATA_NAME = name
DATA_TYPE = 'ASC'
WAIT = ' '
TABLES
DATA_TAB = excel_tab
EXCEPTIONS
NO_BATCH = 1
EXCEL_NOT_INSTALLED = 2
WRONG_VERSION = 3
INTERNAL_ERROR = 4
INVALID_TYPE = 5
CANCELLED = 6
DOWNLOAD_ERROR = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "" download_to_excel
Cheers
VJ -
How to download a text file from the server
hi everyone,
can anyone tell me how to download and read a text file from the server and saved in into resource folder.
with regards
pallaviits really easy
To read from server, use something like:
HttpConnection connector = null;
InputStream inp_stream = null;
OutputStream out_stream = null;
void CloseConnection()
if(inp_stream!=null)inp_stream.close();
inp_stream=null;
if(out_stream!=null)out_stream.close();
out_stream=null;
connector.close();
connector = null;
public void getResponse(String URL,String params)
try
if(connector==null)connector = (HttpConnection)Connector.open(URL);//URL of your text file / php script
connector.setRequestMethod(HttpConnection.POST);
connector.setRequestProperty("User-Agent","Profile/MIDP-2.0 Configuration/CLDC-1.1");
connector.setRequestProperty("content-type", "application/x-www-form-urlencoded");
//connector.setRequestProperty("charset","windows-1251");
//*** If you need to send ("arg1=value&arg2=value") arguments to script use this:
out_stream = connector.openOutputStream();
byte postmsg[] = params.getBytes();
out_stream.write(postmsg);
int rc = connector.getResponseCode();//in any case here connection will be opened & closed
if (rc != HttpConnection.HTTP_OK)
CloseConnection();
throw new IOException("HTTP response code: " + rc);
inp_stream = connector.openInputStream();
int pack_len = inp_stream.available();
byte answ[]=new byte[pack_len];
inp_stream.read(answ);
CloseConnection();
ProcAnswer(answ);//process received data
catch(Exception ex)
System.err.println("ERROR IN getResponse(): "+ex);
} And you can read from resource file like
public void loadFile(String filename)
DataInputStream dis = new DataInputStream(getClass().getResourceAsStream("/"+filename));
String str="";
try
while (true)
ch = dis.read();//read character
if(ch=='\r')continue;//if file made in windows
if(ch=='\n' || ch==-1)//end of line or end of file
if(str.length()==0)continue;//if empty line
//do some thing with "str"
if(ch==-1)break;//it was last line
str="";//next line
continue;
str+=(char)ch;
dis.close();
catch (Exception e)
System.err.println("ERROR in loadFile() " + e);
}Welcome! =)
Edited by: MorskoyZmey on Aug 14, 2008 3:40 AM -
Need to print Header Note from Shipment
Hi gurus
I need to print the Header Note text from shipment.
So far I have the following code:
Include &xxxxxx-tdname& object vttk id 0003 paragraph IT
The X's are what I need to define. Is it VBDKL (although that is Header view for Delivery note) or is there a structure specific to shipment?
Thx,
RMtry if this link helps you.
http://blogs.oracle.com/xmlpublisher/2009/06/conditional_headers.html
Thanks,
Shilpa -
How to prevent freight order note adoption
Hi TM experts,
A freight order is created with reference to another FO.
We don't want to adopt the notes/texts from the referenced FO.
How can we prevent adopting notes/texts from the FO that is referenced to?
Thanks
ErdalThanks Narender,
Let me ask my original question in this way:
How can I determine the 'copy scope' as shown on the below algorithym?
Thanks -
How to download / read text attachment in Sender Mail Adapter IN XI
Hi
I would like to know how to download / read text attachment in sender mail Adapter & sent same attachment to target system using file adapter.
Please help how to design / resolve this concept.
Regards
DSRI would like to know how to download / read text attachment in sender mail Adapter & sent same
attachment to target system using file adapter.
Take help from this blog:
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
From the blog:
However in most cases
our message will not be a part of the e-mail's payload but will be sent as a file attachment.
Can XI's mail adapter handle such scenarios? Sure it can but with a little help
from the PayloadSwapBean adapter module
Once your message (attachment) is read by the sender CC, you can perform the basic mapping requirement (if any) to convert the mail message fromat to the file format.....configure a receiver FILE CC and send the message...this should be the design...
Regards,
Abhishek. -
My transparency does not work on my iPhone and I was wondering how I fix that? It worked when I first downloaded ios7 but not now.
Hello wilsontot_too,
Thank you for the details of the issue you are experiencing on your iPhone. It sounds like you are not noticing transparency on your iPhone. It may be that you have "Increase Contrast" turned on in your iPhone settings.
I recommend verifying that Increase Contrast is turned off in Settings>General>Accessibility.
iPhone User Guide - Large, bold, and high-contrast text
http://help.apple.com/iphone/7/#/iph73b89c6
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
Changes to purchase order report
Can some one suggest me how can get report on Changes made on Purchase Order. What Items are added . At present i am using 0PUR_C01. Loading ITM and SCL. Thanks Babu
-
My windows firewall is disabled (protected by Comcast's Norton program) so that should not be a problem. Should I down load Bonjour?
-
Windows 2008 Server R2 Windows Explorer Refresh Issue
I work on a Windows 2008 R2 server that I connect to through remote desktop. Recently the automatic refresh in Windows Explorer stopped working. If I create, delete, copy, move, rename etc., I do not see the changes unless I refresh (F5). I tried the
-
How to set just hour and minute to a Calendar object and do comparsion
hi there can anyone show me how to just set the time : hour and minute to a calendar obj and do comparion? for instance, compare mid night with 7:24pm, how do i create objects to do it? thanks
-
can't install the new patch 109809-06 the system replies that the patch already exists. verifying the installed patch is 109809-01 my guess is that they both are the same although the revision is different. what can we do for DST on March 11 this wil