How to download Temp tables from Function Module
Hi Gurus,
I have a function Module which is getting data from various DSOs and putting in another DSO.
For data validation purposes I need to download data which is in temp tables.
I know I need to go to SE37 and set breakpoint and then go to rsa3 and run the extractor/ FM in DEBUG mode. After that I have to execute the FM. I performed all these steps but still could not downlaod temp tables.
Anybody has any suggestions if I am missing any steps in here.
Regards
if you have a temp table - say itab - then you can have an open dataset command to dump the table into a flat file in your app server and then do the reconsiliation with that data. This is because extraction is done using a background job and you can only store the data as a flat file onto the app server.
The flat file can be generated using the open dataset command.
Similar Messages
-
How to get data to internal table from function module tr_inspect_objects
How to get data from funtion module to an internal table .
function module name is tr_inspect_objects(code inspectore se10)
how top collect all task request data into one internal table using this fm or we have to create another fm .
If you have already made FM please give us the code .Hi,
You can use tables E070 or E071 to get data into your internal tables instead of a function module.
Hope this helps.
BR
Dep -
How to Suppress information message from Function module ?
Hello Every one ,
I have a problem when executing the function module in RF Tranasaction , I have a requirement to create a handling units through COPAWA transaction, i am using few function modules which is using by transactions , in that the function module it is giving an information message from FM COHU_EXBEREIT_LINE_CHECK, i need to use this function module becuase it will validate the entries . that is the reason i am using it
but I want to suppress the message .,
Any suggestions , please.
Thanks in Advance.
NagsAdd an Exception error_message while calling your function module in the program. It will suppress S, I, W messages
EXCEPTIONS
CHECK_ERROR = 1
OTHERS = 2
ERROR_MESSAGE = 3. " Add this line also -
How to return a table from function
Hi,
I want to return a table from the function. But i'm unable to do it.
can any one give me a peice of code.
Thanks in advance.
Regards,
AlokAre you referring to a pipelined table function?
Here is an example of such a function returning a "hailstone" sequence.. a number range that always end in 4,2,1. (see the [url http://en.wikipedia.org/wiki/Collatz_conjecture]Collatz Conjecture for more details on the maths used).
SQL> create or replace type TNumbers is table of number;
2 /
Type created.
SQL>
SQL> create or replace function hailstone( nValue number ) return TNumbers pipelined is
2 n number;
3 begin
4 n := nValue;
5 loop
6 PIPE ROW( n );
7 exit when n = 1;
8
9 if MOD(n,2) != 0 then
10 n := (n * 3) + 1;
11 else
12 n := n / 2;
13
14 end if;
15 end loop;
16 end;
17 /
Function created.
SQL> show errors
No errors.
SQL>
SQL>
SQL> select * from TABLE( hailstone(10) );
COLUMN_VALUE
10
5
16
8
4
2
1
7 rows selected.
SQL> select * from TABLE( hailstone(1923413) );
..etc. -
ITS Flow Logic : Example of passing a Fields/tables from Function Module?
Hi all,
does someone know, what needs to be done (including settings) to being able to call a FM with various outputs(fileds and tables) from a flow file !?
I am a little bit confused...a full example would be greatly appreciated !!
Thank you very much !
Christhis may be of help to you.
http://www.sapgenie.com/its/flowlogic.htm
Regards
Raja -
Passing dynamic table to function module
Hi all,
actully i have to pass dynamic internal table from function module.
for that i use syntax
move <dyn_table> to data_tab.
but now my question is that in fm parameters what is the type spec & associated type for data_tab in fm parameters.
regards,
anujHi
Good
Here is a simple example of passing an internal table "itab" to a function module "REUSE_ALV_LIST_DISPALY".
It displays the internal table data into a list format.
data : itab like ztest213 occurs 0 with header line.
tables : ztest213 .
select * from ztest213 into table itab.
loop at itab.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_structure_name = 'ztest213'
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = itab
exceptions
program_error = 1
others = 2
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
Thanks
mrutyun^ -
How to create a generic datasource from function module?
Dear experts,
I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
I have now some difficulties to continue:
In this function module, i get data from different transparent tables. Then i put these data into an internal table.
I just don't know what is the relatioin between the structure i defined and this internal table.
I should make "iTab structure AA" in the source code?
ThanksHi..
check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " XXXX " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
.Create a function group .
. Structure ZTXXXX
Create function module (i.e. ZTESTXXX) .
. Create the data source using transaction (RSO2).
. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter .
Test the datasource in R/3 using transaction RSA3.
Transfer the data source to BW System and replicate it in the BW-System.
Message was edited by:
shiv -
How to create webservice from function module
Hello,
I'm trying to create webservice from function module from. I choose Utilities/More Utilities/Create Webservice/..From function Module. What data should I enter in section "Enter Package/Request" ?
When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign namespaces"
Is there any doc about this procedure (web service creation) with description of all sections ?
thanks for any reply,
Lukasz FerencHi,
Which SAP product of wich release of which SP are you using ?
The procedure is documented in help.sap.com and in blogs and SDN forum messages.
It means that the use of the SEARCH button should give plenty of answers...
>When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign >namespaces"
As usual, begin your choosen name with an "Z".
Regards,
Olivier -
How to download a file from AL11 inot Excel format without collapse the col
Hi,
Please suggest how to download a file from AL11 to Excel sheet.currenlty all field are merging into single column.I writing this file via using DATASET.
Regards
RickyHi,
Try this code,
==============================================
TYPES : BEGIN OF ty_emp,
empno(2) TYPE c,
empid(10) TYPE c,
empname(3) TYPE c,
END OF ty_emp.
DATA : it_emp TYPE TABLE OF ty_emp,
wa_emp TYPE ty_emp.
DATA : pbk TYPE string.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file TYPE rlgrap-filename.
PARAMETERS : p_asfile TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK b1.
pbk = p_file.
OPEN DATASET p_asfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET p_asfile INTO wa_emp.
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND wa_emp TO it_emp.
ENDDO.
CLOSE DATASET p_asfile.
Filling the already created file with download PS radiobutton
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = pbk
FILETYPE = 'ASC'
append = 'X'
write_field_separator = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = it_emp
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
==============================================
Regards,
Krrishna -
How to write the exceptions in function module
dear all,
how to write the exceptions in function modules with example.
thanq
jyothiHi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM -
How to extract data by using function module in generic extraction please
how to extract data by using function module in generic extraction please give me steps required
Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram. -
ConfigurableVariant materialclassification values-Tables or Function module
Hi All,
We have a configurable material (say M01) with Class type 300 and have various characteristics assigned to the class. We have a variant material (say 234567) assigned to the configurable material M01. In the Characteristic values assignment screen we assign a value (say 123) to the characteristic Paper material.
Now my question is how to get the link between characteristic Paper material (123) and variant material (234567). We have a transaction CL31 where you can get variant material if you give the paper material characteristic. I want to know if there is any table or Function module available to get the link.
Appreciate your reply.
Thanks,
Srinivasthis type of setting is in the item category settings from sales order.
if your selction criteria (values ) matches with the exiting material code which got same charectristic valeus as that of selection in Sales order, that material will be replace by exiting material code.
you can see that setting in spro>Sales and Distribution>Sales>Sales Documents>Sales Document Item-->Define Item Categories here indicator variant maching should be ticked and Mat. Variant Action as 2 or 4.
Regards,
Pravin Mukkawar -
How to download internal table data into xml file?
Hi,
Experts,
I have downloaded internal table data into XLS format using GUI_DOWNLOAD Function module, But i didn't Know how to download internal table data into XML format please post some ideas/inputs on this issue.
Thank you,
Shabeer ahmed.check this
data : gd_repid type sy-repid.
GD_REPID = SY-REPID.
DATA : L_DOM TYPE REF TO IF_IXML_ELEMENT,
M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
G_IXML TYPE REF TO IF_IXML,
W_STRING TYPE XSTRING,
W_SIZE TYPE I,
W_RESULT TYPE I,
W_LINE TYPE STRING,
IT_XML TYPE DCXMLLINES,
S_XML LIKE LINE OF IT_XML,
W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
BEGIN OF XML_TAB OCCURS 0,
D LIKE LINE OF XML,
END OF XML_TAB.
data : l_element type ref to if_ixml_element,
xml_ns_prefix_sf type string,
xml_ns_uri_sf type string.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
NAME = 'REPAIRDATA'
DATAOBJECT = IT_FINAL_LAST1[]
IMPORTING
DATA_AS_DOM = L_DOM
CHANGING
DOCUMENT = M_DOCUMENT
EXCEPTIONS
ILLEGAL_NAME = 1
OTHERS = 2.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
*Start of code for Header
* namespace
t_mnr = sy-datum+4(2).
CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
EXPORTING
LANGU = 'E'
MONTH = t_mnr
IMPORTING
T247 = wa_t247
concatenate sy-datum+6(2)
wa_t247-ktx
sy-datum(4) into t_var1.
concatenate sy-uzeit(2)
sy-uzeit+2(2)
sy-uzeit+4(2) into t_var2.
clear : xml_ns_prefix_sf,
xml_ns_uri_sf.
l_element = m_document->get_root_element( ).
xml_ns_prefix_sf = 'TIMESTAMP'.
concatenate t_var1 t_var2 into xml_ns_uri_sf separated by space.
clear : t_var1,
t_var2,
t_mnr,
wa_t247.
l_element->set_attribute( name = xml_ns_prefix_sf
namespace = ' '
value = xml_ns_uri_sf ).
clear : xml_ns_prefix_sf,
xml_ns_uri_sf.
xml_ns_prefix_sf = 'FILECREATOR'.
xml_ns_uri_sf = 'SAP'.
l_element->set_attribute( name = xml_ns_prefix_sf
namespace = ' '
value = xml_ns_uri_sf ).
clear : xml_ns_prefix_sf,
xml_ns_uri_sf.
xml_ns_prefix_sf = 'CLAIMGROUP'.
xml_ns_uri_sf = '1'.
l_element->set_attribute( name = xml_ns_prefix_sf
namespace = ' '
value = xml_ns_uri_sf ).
clear : xml_ns_prefix_sf,
xml_ns_uri_sf.
xml_ns_prefix_sf = 'CLAIMTYPES'.
xml_ns_uri_sf = 'W'.
l_element->set_attribute( name = xml_ns_prefix_sf
namespace = ' '
value = xml_ns_uri_sf ).
*End of Code for Header
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
DOCUMENT = M_DOCUMENT
IMPORTING
XML_AS_STRING = W_STRING
SIZE = W_SIZE
TABLES
XML_AS_TABLE = IT_XML
EXCEPTIONS
NO_DOCUMENT = 1
OTHERS = 2.
LOOP AT IT_XML INTO XML_TAB-D.
APPEND XML_TAB.
ENDLOOP.
*Start of Code for File name
concatenate p_file
'\R'
'000_119481'
sy-datum+6(2) sy-datum+4(2) sy-datum+2(2)
sy-uzeit(2) sy-uzeit+2(2) sy-uzeit(2) '.xml' into p_file.
*End of Code for File name
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_SIZE
FILENAME = p_file
FILETYPE = 'BIN'
TABLES
DATA_TAB = XML_TAB
EXCEPTIONS
OTHERS = 10.
IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to use Logical database in function module?
I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards -
How to download a file from Path specifed
Hi Frndz..
How to download a file from a specified path like , i have a file on server in the path like "C://temp/Sap.pdf"
I want to download this to user desktop..
Thanks in Advance
regards
RajeshHi,
For file down load u have to use a UI element as "File download".
u just create context attribute as setdownload_res and file data.
setdownload_res as of type "com.sap.ide.webdynpro.uielementdefinitions.Resource" then bound it to the ui element "resource".
file data as of type "com.sap.tc.webdynpro.progmodel.api.IWDInputStream"
and set calcuclated as true and read only as true.
then in doinit method u just write this code
IWDAttributePointer attr = wdContext.currentContextElement().getAttributePointer("fileData");
IWDResource res = WDResourceFactory.createResource(attr,null,WDWebResourceType.UNKNOWN);
wdContext.currentContextElement().setDownload_res(res);
wdComponentAPI.getMessageManager().reportSuccess(""+c);
after this in the getter method u write this code
IWDInputStream stream = null;
try
stream = WDResourceFactory.createInputStream(new FileInputStream(new File("<pathof the file to be download>")));
catch(Exception e)
e.printStackTrace();
return stream;
also look at this thread How to DownLoad any type of File from the server(PDF,XLS,Word)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202a850a-58e0-2910-eeb3-bfc3e081257f
PradeeP
Maybe you are looking for
-
I want to use elements 11 with an external hard drive and need some help.
I have a macbook pro and was fine using iphoto 09 as my image manager and editor. I soon filled my hard drive and purchased a 1tb external hard drive. I moved my iphoto library to the external drive while keeping iphoto on the macbook. I recently ins
-
Updated to ios 7.1 now my iPhone 5c music player doesn't work properly?
I bought an iPhone 5c last night and everything worked great until I updated to ios 7.1. Now my music player only works using the earphones. It won't respond if I try controlling it on screen.
-
Batch selection as per expiry date
Hi, Please have alook at my requirement and suggest the possible solution. We have raw material which is handles in batches. Let's say a raw material has three batch in the stock M1, M2 and M3. M1 expiry date is on march10, M1 expiry date is on apri
-
HT203167 Were do I find a rented movie on my iPad?
I rented a movie last week and got confirmation that it was charged to my account but I don't know were it is.
-
Mac Mini running Snow leopard gray screen won't boot up.
My mac mini server was running great! working on some file sharing issues system crashed. Ran utilities check repair disks and first aid said no problems with either HD. I would like to reboot and install system software. without deleting my tunes li